2 files changed, 188 insertions, 0 deletions
diff --git a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0 b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0
deleted file mode 160000
-Subproject 7c2e6c1bcdcc22cfdbd82edd9d8fc4c4276ead4
diff --git a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/Bluetooth/PS3BT/PS3BT.ino b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/Bluetooth/PS3BT/PS3BT.ino
new file mode 100644
index 0000000000..b896734405
--- /dev/null
+++ b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/Bluetooth/PS3BT/PS3BT.ino
@@ -0,0 +1,188 @@
+/*
+ Example sketch for the PS3 Bluetooth library - developed by Kristian Lauszus
+ For more information visit my blog: http://blog.tkjelectronics.dk/ or
+ send me an e-mail:  kristianl@tkjelectronics.com
+ */
+
+#include <PS3BT.h>
+#include <usbhub.h>
+
+// Satisfy the IDE, which needs to see the include statment in the ino too.
+#ifdef dobogusinclude
+#include <spi4teensy3.h>
+#include <SPI.h>
+#endif
+
+USB Usb;
+//USBHub Hub1(&Usb); // Some dongles have a hub inside
+
+BTD Btd(&Usb); // You have to create the Bluetooth Dongle instance like so
+/* You can create the instance of the class in two ways */
+PS3BT PS3(&Btd); // This will just create the instance
+//PS3BT PS3(&Btd, 0x00, 0x15, 0x83, 0x3D, 0x0A, 0x57); // This will also store the bluetooth address - this can be obtained from the dongle when running the sketch
+
+bool printTemperature;
+bool printAngle;
+
+void setup() {
+  Serial.begin(115200);
+#if !defined(__MIPSEL__)
+  while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection
+#endif
+  if (Usb.Init() == -1) {
+    Serial.print(F("\r\nOSC did not start"));
+    while (1); //halt
+  }
+  Serial.print(F("\r\nPS3 Bluetooth Library Started"));
+}
+void loop() {
+  Usb.Task();
+
+  if (PS3.PS3Connected || PS3.PS3NavigationConnected) {
+    if (PS3.getAnalogHat(LeftHatX) > 137 || PS3.getAnalogHat(LeftHatX) < 117 || PS3.getAnalogHat(LeftHatY) > 137 || PS3.getAnalogHat(LeftHatY) < 117 || PS3.getAnalogHat(RightHatX) > 137 || PS3.getAnalogHat(RightHatX) < 117 || PS3.getAnalogHat(RightHatY) > 137 || PS3.getAnalogHat(RightHatY) < 117) {
+      Serial.print(F("\r\nLeftHatX: "));
+      Serial.print(PS3.getAnalogHat(LeftHatX));
+      Serial.print(F("\tLeftHatY: "));
+      Serial.print(PS3.getAnalogHat(LeftHatY));
+      if (PS3.PS3Connected) { // The Navigation controller only have one joystick
+        Serial.print(F("\tRightHatX: "));
+        Serial.print(PS3.getAnalogHat(RightHatX));
+        Serial.print(F("\tRightHatY: "));
+        Serial.print(PS3.getAnalogHat(RightHatY));
+      }
+    }
+
+    // Analog button values can be read from almost all buttons
+    if (PS3.getAnalogButton(L2) || PS3.getAnalogButton(R2)) {
+      Serial.print(F("\r\nL2: "));
+      Serial.print(PS3.getAnalogButton(L2));
+      if (PS3.PS3Connected) {
+        Serial.print(F("\tR2: "));
+        Serial.print(PS3.getAnalogButton(R2));
+      }
+    }
+    if (PS3.getButtonClick(PS)) {
+      Serial.print(F("\r\nPS"));
+      PS3.disconnect();
+    }
+    else {
+      if (PS3.getButtonClick(TRIANGLE))
+        Serial.print(F("\r\nTraingle"));
+      if (PS3.getButtonClick(CIRCLE))
+        Serial.print(F("\r\nCircle"));
+      if (PS3.getButtonClick(CROSS))
+        Serial.print(F("\r\nCross"));
+      if (PS3.getButtonClick(SQUARE))
+        Serial.print(F("\r\nSquare"));
+
+      if (PS3.getButtonClick(UP)) {
+        Serial.print(F("\r\nUp"));
+        if (PS3.PS3Connected) {
+          PS3.setLedOff();
+          PS3.setLedOn(LED4);
+        }
+      }
+      if (PS3.getButtonClick(RIGHT)) {
+        Serial.print(F("\r\nRight"));
+        if (PS3.PS3Connected) {
+          PS3.setLedOff();
+          PS3.setLedOn(LED1);
+        }
+      }
+      if (PS3.getButtonClick(DOWN)) {
+        Serial.print(F("\r\nDown"));
+        if (PS3.PS3Connected) {
+          PS3.setLedOff();
+          PS3.setLedOn(LED2);
+        }
+      }
+      if (PS3.getButtonClick(LEFT)) {
+        Serial.print(F("\r\nLeft"));
+        if (PS3.PS3Connected) {
+          PS3.setLedOff();
+          PS3.setLedOn(LED3);
+        }
+      }
+
+      if (PS3.getButtonClick(L1))
+        Serial.print(F("\r\nL1"));
+      if (PS3.getButtonClick(L3))
+        Serial.print(F("\r\nL3"));
+      if (PS3.getButtonClick(R1))
+        Serial.print(F("\r\nR1"));
+      if (PS3.getButtonClick(R3))
+        Serial.print(F("\r\nR3"));
+
+      if (PS3.getButtonClick(SELECT)) {
+        Serial.print(F("\r\nSelect - "));
+        PS3.printStatusString();
+      }
+      if (PS3.getButtonClick(START)) {
+        Serial.print(F("\r\nStart"));
+        printAngle = !printAngle;
+      }
+    }
+#if 0 // Set this to 1 in order to see the angle of the controller
+    if (printAngle) {
+      Serial.print(F("\r\nPitch: "));
+      Serial.print(PS3.getAngle(Pitch));
+      Serial.print(F("\tRoll: "));
+      Serial.print(PS3.getAngle(Roll));
+    }
+#endif
+  }
+#if 0 // Set this to 1 in order to enable support for the Playstation Move controller
+  else if (PS3.PS3MoveConnected) {
+    if (PS3.getAnalogButton(T)) {
+      Serial.print(F("\r\nT: "));
+      Serial.print(PS3.getAnalogButton(T));
+    }
+    if (PS3.getButtonClick(PS)) {
+      Serial.print(F("\r\nPS"));
+      PS3.disconnect();
+    }
+    else {
+      if (PS3.getButtonClick(SELECT)) {
+        Serial.print(F("\r\nSelect"));
+        printTemperature = !printTemperature;
+      }
+      if (PS3.getButtonClick(START)) {
+        Serial.print(F("\r\nStart"));
+        printAngle = !printAngle;
+      }
+      if (PS3.getButtonClick(TRIANGLE)) {
+        Serial.print(F("\r\nTriangle"));
+        PS3.moveSetBulb(Red);
+      }
+      if (PS3.getButtonClick(CIRCLE)) {
+        Serial.print(F("\r\nCircle"));
+        PS3.moveSetBulb(Green);
+      }
+      if (PS3.getButtonClick(SQUARE)) {
+        Serial.print(F("\r\nSquare"));
+        PS3.moveSetBulb(Blue);
+      }
+      if (PS3.getButtonClick(CROSS)) {
+        Serial.print(F("\r\nCross"));
+        PS3.moveSetBulb(Yellow);
+      }
+      if (PS3.getButtonClick(MOVE)) {
+        PS3.moveSetBulb(Off);
+        Serial.print(F("\r\nMove"));
+        Serial.print(F(" - "));
+        PS3.printStatusString();
+      }
+    }
+    if (printAngle) {
+      Serial.print(F("\r\nPitch: "));
+      Serial.print(PS3.getAngle(Pitch));
+      Serial.print(F("\tRoll: "));
+      Serial.print(PS3.getAngle(Roll));
+    }
+    else if (printTemperature) {
+      Serial.print(F("\r\nTemperature: "));
+      Serial.print(PS3.getTemperature());
+    }
+  }
+#endif
+}