diff options
Diffstat (limited to 'tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/XBOXRECV.cpp')
| m--------- | tmk_core/protocol/usb_hid/USB_Host_Shield_2.0 | 0 | ||||
| -rw-r--r-- | tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/XBOXRECV.cpp | 583 |
2 files changed, 583 insertions, 0 deletions
diff --git a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0 b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0 deleted file mode 160000 -Subproject 7c2e6c1bcdcc22cfdbd82edd9d8fc4c4276ead4 diff --git a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/XBOXRECV.cpp b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/XBOXRECV.cpp new file mode 100644 index 0000000000..41f1ff5816 --- /dev/null +++ b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/XBOXRECV.cpp @@ -0,0 +1,583 @@ +/* Copyright (C) 2012 Kristian Lauszus, TKJ Electronics. All rights reserved. + + This software may be distributed and modified under the terms of the GNU + General Public License version 2 (GPL2) as published by the Free Software + Foundation and appearing in the file GPL2.TXT included in the packaging of + this file. Please note that GPL2 Section 2[b] requires that all works based + on this software must also be made publicly available under the terms of + the GPL2 ("Copyleft"). + + Contact information + ------------------- + + Kristian Lauszus, TKJ Electronics + Web : http://www.tkjelectronics.com + e-mail : kristianl@tkjelectronics.com + + getBatteryLevel and checkStatus functions made by timstamp.co.uk found using BusHound from Perisoft.net + */ + +#include "XBOXRECV.h" +// To enable serial debugging see "settings.h" +//#define EXTRADEBUG // Uncomment to get even more debugging data +//#define PRINTREPORT // Uncomment to print the report send by the Xbox 360 Controller + +XBOXRECV::XBOXRECV(USB *p) : +pUsb(p), // pointer to USB class instance - mandatory +bAddress(0), // device address - mandatory +bPollEnable(false) { // don't start polling before dongle is connected + for(uint8_t i = 0; i < XBOX_MAX_ENDPOINTS; i++) { + epInfo[i].epAddr = 0; + epInfo[i].maxPktSize = (i) ? 0 : 8; + epInfo[i].epAttribs = 0; + epInfo[i].bmNakPower = (i) ? USB_NAK_NOWAIT : USB_NAK_MAX_POWER; + } + + if(pUsb) // register in USB subsystem + pUsb->RegisterDeviceClass(this); //set devConfig[] entry +} + +uint8_t XBOXRECV::ConfigureDevice(uint8_t parent, uint8_t port, bool lowspeed) { + const uint8_t constBufSize = sizeof (USB_DEVICE_DESCRIPTOR); + uint8_t buf[constBufSize]; + USB_DEVICE_DESCRIPTOR * udd = reinterpret_cast<USB_DEVICE_DESCRIPTOR*>(buf); + uint8_t rcode; + UsbDevice *p = NULL; + EpInfo *oldep_ptr = NULL; + uint16_t PID, VID; + + AddressPool &addrPool = pUsb->GetAddressPool(); // Get memory address of USB device address pool +#ifdef EXTRADEBUG + Notify(PSTR("\r\nXBOXRECV Init"), 0x80); +#endif + + if(bAddress) { // Check if address has already been assigned to an instance +#ifdef DEBUG_USB_HOST + Notify(PSTR("\r\nAddress in use"), 0x80); +#endif + return USB_ERROR_CLASS_INSTANCE_ALREADY_IN_USE; + } + + p = addrPool.GetUsbDevicePtr(0); // Get pointer to pseudo device with address 0 assigned + + if(!p) { +#ifdef DEBUG_USB_HOST + Notify(PSTR("\r\nAddress not found"), 0x80); +#endif + return USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL; + } + + if(!p->epinfo) { +#ifdef DEBUG_USB_HOST + Notify(PSTR("\r\nepinfo is null"), 0x80); +#endif + return USB_ERROR_EPINFO_IS_NULL; + } + + oldep_ptr = p->epinfo; // Save old pointer to EP_RECORD of address 0 + p->epinfo = epInfo; // Temporary assign new pointer to epInfo to p->epinfo in order to avoid toggle inconsistence + p->lowspeed = lowspeed; + + rcode = pUsb->getDevDescr(0, 0, constBufSize, (uint8_t*)buf); // Get device descriptor - addr, ep, nbytes, data + + p->epinfo = oldep_ptr; // Restore p->epinfo + + if(rcode) + goto FailGetDevDescr; + + VID = udd->idVendor; + PID = udd->idProduct; + + if((VID != XBOX_VID && VID != MADCATZ_VID && VID != JOYTECH_VID) || (PID != XBOX_WIRELESS_RECEIVER_PID && PID != XBOX_WIRELESS_RECEIVER_THIRD_PARTY_PID)) { // Check if it's a Xbox receiver using the Vendor ID and Product ID +#ifdef DEBUG_USB_HOST + Notify(PSTR("\r\nYou'll need a wireless receiver for this libary to work"), 0x80); +#endif + goto FailUnknownDevice; + } + + bAddress = addrPool.AllocAddress(parent, false, port); // Allocate new address according to device class + + if(!bAddress) { +#ifdef DEBUG_USB_HOST + Notify(PSTR("\r\nOut of address space"), 0x80); +#endif + return USB_ERROR_OUT_OF_ADDRESS_SPACE_IN_POOL; + } + + epInfo[0].maxPktSize = udd->bMaxPacketSize0; // Extract Max Packet Size from device descriptor + + delay(20); // Wait a little before resetting device + + return USB_ERROR_CONFIG_REQUIRES_ADDITIONAL_RESET; + + /* Diagnostic messages */ +FailGetDevDescr: +#ifdef DEBUG_USB_HOST + NotifyFailGetDevDescr(rcode); +#endif + if(rcode != hrJERR) + rcode = USB_ERROR_FailGetDevDescr; + goto Fail; + +FailUnknownDevice: +#ifdef DEBUG_USB_HOST + NotifyFailUnknownDevice(VID, PID); +#endif + rcode = USB_DEV_CONFIG_ERROR_DEVICE_NOT_SUPPORTED; + +Fail: +#ifdef DEBUG_USB_HOST + Notify(PSTR("\r\nXbox 360 Init Failed, error code: "), 0x80); + NotifyFail(rcode); +#endif + Release(); + return rcode; +}; + +uint8_t XBOXRECV::Init(uint8_t parent, uint8_t port, bool lowspeed) { + uint8_t rcode; + + AddressPool &addrPool = pUsb->GetAddressPool(); +#ifdef EXTRADEBUG + Notify(PSTR("\r\nBTD Init"), 0x80); +#endif + UsbDevice *p = addrPool.GetUsbDevicePtr(bAddress); // Get pointer to assigned address record + + if(!p) { +#ifdef DEBUG_USB_HOST + Notify(PSTR("\r\nAddress not found"), 0x80); +#endif + return USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL; + } + + delay(300); // Assign new address to the device + + rcode = pUsb->setAddr(0, 0, bAddress); // Assign new address to the device + if(rcode) { +#ifdef DEBUG_USB_HOST + Notify(PSTR("\r\nsetAddr: "), 0x80); + D_PrintHex<uint8_t > (rcode, 0x80); +#endif + p->lowspeed = false; + goto Fail; + } +#ifdef EXTRADEBUG + Notify(PSTR("\r\nAddr: "), 0x80); + D_PrintHex<uint8_t > (bAddress, 0x80); +#endif + + p->lowspeed = false; + + p = addrPool.GetUsbDevicePtr(bAddress); // Get pointer to assigned address record + if(!p) { +#ifdef DEBUG_USB_HOST + Notify(PSTR("\r\nAddress not found"), 0x80); +#endif + return USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL; + } + + p->lowspeed = lowspeed; + + rcode = pUsb->setEpInfoEntry(bAddress, 1, epInfo); // Assign epInfo to epinfo pointer - only EP0 is known + if(rcode) + goto FailSetDevTblEntry; + + /* The application will work in reduced host mode, so we can save program and data + memory space. After verifying the VID we will use known values for the + configuration values for device, interface, endpoints and HID for the XBOX360 Wireless receiver */ + + /* Initialize data structures for endpoints of device */ + epInfo[ XBOX_INPUT_PIPE_1 ].epAddr = 0x01; // XBOX 360 report endpoint - poll interval 1ms + epInfo[ XBOX_INPUT_PIPE_1 ].epAttribs = USB_TRANSFER_TYPE_INTERRUPT; + epInfo[ XBOX_INPUT_PIPE_1 ].bmNakPower = USB_NAK_NOWAIT; // Only poll once for interrupt endpoints + epInfo[ XBOX_INPUT_PIPE_1 ].maxPktSize = EP_MAXPKTSIZE; + epInfo[ XBOX_INPUT_PIPE_1 ].bmSndToggle = 0; + epInfo[ XBOX_INPUT_PIPE_1 ].bmRcvToggle = 0; + epInfo[ XBOX_OUTPUT_PIPE_1 ].epAddr = 0x01; // XBOX 360 output endpoint - poll interval 8ms + epInfo[ XBOX_OUTPUT_PIPE_1 ].epAttribs = USB_TRANSFER_TYPE_INTERRUPT; + epInfo[ XBOX_OUTPUT_PIPE_1 ].bmNakPower = USB_NAK_NOWAIT; // Only poll once for interrupt endpoints + epInfo[ XBOX_OUTPUT_PIPE_1 ].maxPktSize = EP_MAXPKTSIZE; + epInfo[ XBOX_OUTPUT_PIPE_1 ].bmSndToggle = 0; + epInfo[ XBOX_OUTPUT_PIPE_1 ].bmRcvToggle = 0; + + epInfo[ XBOX_INPUT_PIPE_2 ].epAddr = 0x03; // XBOX 360 report endpoint - poll interval 1ms + epInfo[ XBOX_INPUT_PIPE_2 ].epAttribs = USB_TRANSFER_TYPE_INTERRUPT; + epInfo[ XBOX_INPUT_PIPE_2 ].bmNakPower = USB_NAK_NOWAIT; // Only poll once for interrupt endpoints + epInfo[ XBOX_INPUT_PIPE_2 ].maxPktSize = EP_MAXPKTSIZE; + epInfo[ XBOX_INPUT_PIPE_2 ].bmSndToggle = 0; + epInfo[ XBOX_INPUT_PIPE_2 ].bmRcvToggle = 0; + epInfo[ XBOX_OUTPUT_PIPE_2 ].epAddr = 0x03; // XBOX 360 output endpoint - poll interval 8ms + epInfo[ XBOX_OUTPUT_PIPE_2 ].epAttribs = USB_TRANSFER_TYPE_INTERRUPT; + epInfo[ XBOX_OUTPUT_PIPE_2 ].bmNakPower = USB_NAK_NOWAIT; // Only poll once for interrupt endpoints + epInfo[ XBOX_OUTPUT_PIPE_2 ].maxPktSize = EP_MAXPKTSIZE; + epInfo[ XBOX_OUTPUT_PIPE_2 ].bmSndToggle = 0; + epInfo[ XBOX_OUTPUT_PIPE_2 ].bmRcvToggle = 0; + + epInfo[ XBOX_INPUT_PIPE_3 ].epAddr = 0x05; // XBOX 360 report endpoint - poll interval 1ms + epInfo[ XBOX_INPUT_PIPE_3 ].epAttribs = USB_TRANSFER_TYPE_INTERRUPT; + epInfo[ XBOX_INPUT_PIPE_3 ].bmNakPower = USB_NAK_NOWAIT; // Only poll once for interrupt endpoints + epInfo[ XBOX_INPUT_PIPE_3 ].maxPktSize = EP_MAXPKTSIZE; + epInfo[ XBOX_INPUT_PIPE_3 ].bmSndToggle = 0; + epInfo[ XBOX_INPUT_PIPE_3 ].bmRcvToggle = 0; + epInfo[ XBOX_OUTPUT_PIPE_3 ].epAddr = 0x05; // XBOX 360 output endpoint - poll interval 8ms + epInfo[ XBOX_OUTPUT_PIPE_3 ].epAttribs = USB_TRANSFER_TYPE_INTERRUPT; + epInfo[ XBOX_OUTPUT_PIPE_3 ].bmNakPower = USB_NAK_NOWAIT; // Only poll once for interrupt endpoints + epInfo[ XBOX_OUTPUT_PIPE_3 ].maxPktSize = EP_MAXPKTSIZE; + epInfo[ XBOX_OUTPUT_PIPE_3 ].bmSndToggle = 0; + epInfo[ XBOX_OUTPUT_PIPE_3 ].bmRcvToggle = 0; + + epInfo[ XBOX_INPUT_PIPE_4 ].epAddr = 0x07; // XBOX 360 report endpoint - poll interval 1ms + epInfo[ XBOX_INPUT_PIPE_4 ].epAttribs = USB_TRANSFER_TYPE_INTERRUPT; + epInfo[ XBOX_INPUT_PIPE_4 ].bmNakPower = USB_NAK_NOWAIT; // Only poll once for interrupt endpoints + epInfo[ XBOX_INPUT_PIPE_4 ].maxPktSize = EP_MAXPKTSIZE; + epInfo[ XBOX_INPUT_PIPE_4 ].bmSndToggle = 0; + epInfo[ XBOX_INPUT_PIPE_4 ].bmRcvToggle = 0; + epInfo[ XBOX_OUTPUT_PIPE_4 ].epAddr = 0x07; // XBOX 360 output endpoint - poll interval 8ms + epInfo[ XBOX_OUTPUT_PIPE_4 ].epAttribs = USB_TRANSFER_TYPE_INTERRUPT; + epInfo[ XBOX_OUTPUT_PIPE_4 ].bmNakPower = USB_NAK_NOWAIT; // Only poll once for interrupt endpoints + epInfo[ XBOX_OUTPUT_PIPE_4 ].maxPktSize = EP_MAXPKTSIZE; + epInfo[ XBOX_OUTPUT_PIPE_4 ].bmSndToggle = 0; + epInfo[ XBOX_OUTPUT_PIPE_4 ].bmRcvToggle = 0; + + rcode = pUsb->setEpInfoEntry(bAddress, 9, epInfo); + if(rcode) + goto FailSetDevTblEntry; + + delay(200); //Give time for address change + + rcode = pUsb->setConf(bAddress, epInfo[ XBOX_CONTROL_PIPE ].epAddr, 1); + if(rcode) + goto FailSetConfDescr; + +#ifdef DEBUG_USB_HOST + Notify(PSTR("\r\nXbox Wireless Receiver Connected\r\n"), 0x80); +#endif + XboxReceiverConnected = true; + bPollEnable = true; + checkStatusTimer = 0; // Reset timer + return 0; // Successful configuration + + /* Diagnostic messages */ +FailSetDevTblEntry: +#ifdef DEBUG_USB_HOST + NotifyFailSetDevTblEntry(); + goto Fail; +#endif + +FailSetConfDescr: +#ifdef DEBUG_USB_HOST + NotifyFailSetConfDescr(); +#endif + +Fail: +#ifdef DEBUG_USB_HOST + Notify(PSTR("\r\nXbox 360 Init Failed, error code: "), 0x80); + NotifyFail(rcode); +#endif + Release(); + return rcode; +} + +/* Performs a cleanup after failed Init() attempt */ +uint8_t XBOXRECV::Release() { + XboxReceiverConnected = false; + for(uint8_t i = 0; i < 4; i++) + Xbox360Connected[i] = 0x00; + pUsb->GetAddressPool().FreeAddress(bAddress); + bAddress = 0; + bPollEnable = false; + return 0; +} + +uint8_t XBOXRECV::Poll() { + if(!bPollEnable) + return 0; + if(!checkStatusTimer || ((millis() - checkStatusTimer) > 3000)) { // Run checkStatus every 3 seconds + checkStatusTimer = millis(); + checkStatus(); + } + + uint8_t inputPipe; + uint16_t bufferSize; + for(uint8_t i = 0; i < 4; i++) { + if(i == 0) + inputPipe = XBOX_INPUT_PIPE_1; + else if(i == 1) + inputPipe = XBOX_INPUT_PIPE_2; + else if(i == 2) + inputPipe = XBOX_INPUT_PIPE_3; + else + inputPipe = XBOX_INPUT_PIPE_4; + + bufferSize = EP_MAXPKTSIZE; // This is the maximum number of bytes we want to receive + pUsb->inTransfer(bAddress, epInfo[ inputPipe ].epAddr, &bufferSize, readBuf); + if(bufferSize > 0) { // The number of received bytes +#ifdef EXTRADEBUG + Notify(PSTR("Bytes Received: "), 0x80); + D_PrintHex<uint16_t > (bufferSize, 0x80); + Notify(PSTR("\r\n"), 0x80); +#endif + readReport(i); +#ifdef PRINTREPORT + printReport(i, bufferSize); // Uncomment "#define PRINTREPORT" to print the report send by the Xbox 360 Controller +#endif + } + } + return 0; +} + +void XBOXRECV::readReport(uint8_t controller) { + if(readBuf == NULL) + return; + // This report is send when a controller is connected and disconnected + if(readBuf[0] == 0x08 && readBuf[1] != Xbox360Connected[controller]) { + Xbox360Connected[controller] = readBuf[1]; +#ifdef DEBUG_USB_HOST + Notify(PSTR("Controller "), 0x80); + Notify(controller, 0x80); +#endif + if(Xbox360Connected[controller]) { +#ifdef DEBUG_USB_HOST + const char* str = 0; + switch(readBuf[1]) { + case 0x80: str = PSTR(" as controller\r\n"); + break; + case 0x40: str = PSTR(" as headset\r\n"); + break; + case 0xC0: str = PSTR(" as controller+headset\r\n"); + break; + } + Notify(PSTR(": connected"), 0x80); + Notify(str, 0x80); +#endif + onInit(controller); + } +#ifdef DEBUG_USB_HOST + else + Notify(PSTR(": disconnected\r\n"), 0x80); +#endif + return; + } + // Controller status report + if(readBuf[1] == 0x00 && readBuf[3] & 0x13 && readBuf[4] >= 0x22) { + controllerStatus[controller] = ((uint16_t)readBuf[3] << 8) | readBuf[4]; + return; + } + if(readBuf[1] != 0x01) // Check if it's the correct report - the receiver also sends different status reports + return; + + // A controller must be connected if it's sending data + if(!Xbox360Connected[controller]) + Xbox360Connected[controller] |= 0x80; + + ButtonState[controller] = (uint32_t)(readBuf[9] | ((uint16_t)readBuf[8] << 8) | ((uint32_t)readBuf[7] << 16) | ((uint32_t)readBuf[6] << 24)); + + hatValue[controller][LeftHatX] = (int16_t)(((uint16_t)readBuf[11] << 8) | readBuf[10]); + hatValue[controller][LeftHatY] = (int16_t)(((uint16_t)readBuf[13] << 8) | readBuf[12]); + hatValue[controller][RightHatX] = (int16_t)(((uint16_t)readBuf[15] << 8) | readBuf[14]); + hatValue[controller][RightHatY] = (int16_t)(((uint16_t)readBuf[17] << 8) | readBuf[16]); + + //Notify(PSTR("\r\nButtonState: "), 0x80); + //PrintHex<uint32_t>(ButtonState[controller], 0x80); + + if(ButtonState[controller] != OldButtonState[controller]) { + buttonStateChanged[controller] = true; + ButtonClickState[controller] = (ButtonState[controller] >> 16) & ((~OldButtonState[controller]) >> 16); // Update click state variable, but don't include the two trigger buttons L2 and R2 + if(((uint8_t)OldButtonState[controller]) == 0 && ((uint8_t)ButtonState[controller]) != 0) // The L2 and R2 buttons are special as they are analog buttons + R2Clicked[controller] = true; + if((uint8_t)(OldButtonState[controller] >> 8) == 0 && (uint8_t)(ButtonState[controller] >> 8) != 0) + L2Clicked[controller] = true; + OldButtonState[controller] = ButtonState[controller]; + } +} + +void XBOXRECV::printReport(uint8_t controller, uint8_t nBytes) { //Uncomment "#define PRINTREPORT" to print the report send by the Xbox 360 Controller +#ifdef PRINTREPORT + if(readBuf == NULL) + return; + Notify(PSTR("Controller "), 0x80); + Notify(controller, 0x80); + Notify(PSTR(": "), 0x80); + for(uint8_t i = 0; i < nBytes; i++) { + D_PrintHex<uint8_t > (readBuf[i], 0x80); + Notify(PSTR(" "), 0x80); + } + Notify(PSTR("\r\n"), 0x80); +#endif +} + +uint8_t XBOXRECV::getButtonPress(ButtonEnum b, uint8_t controller) { + if(b == L2) // These are analog buttons + return (uint8_t)(ButtonState[controller] >> 8); + else if(b == R2) + return (uint8_t)ButtonState[controller]; + return (bool)(ButtonState[controller] & ((uint32_t)pgm_read_word(&XBOX_BUTTONS[(uint8_t)b]) << 16)); +} + +bool XBOXRECV::getButtonClick(ButtonEnum b, uint8_t controller) { + if(b == L2) { + if(L2Clicked[controller]) { + L2Clicked[controller] = false; + return true; + } + return false; + } else if(b == R2) { + if(R2Clicked[controller]) { + R2Clicked[controller] = false; + return true; + } + return false; + } + uint16_t button = pgm_read_word(&XBOX_BUTTONS[(uint8_t)b]); + bool click = (ButtonClickState[controller] & button); + ButtonClickState[controller] &= ~button; // clear "click" event + return click; +} + +int16_t XBOXRECV::getAnalogHat(AnalogHatEnum a, uint8_t controller) { + return hatValue[controller][a]; +} + +bool XBOXRECV::buttonChanged(uint8_t controller) { + bool state = buttonStateChanged[controller]; + buttonStateChanged[controller] = false; + return state; +} + +/* +ControllerStatus Breakdown +ControllerStatus[controller] & 0x0001 // 0 +ControllerStatus[controller] & 0x0002 // normal batteries, no rechargeable battery pack +ControllerStatus[controller] & 0x0004 // controller starting up / settling +ControllerStatus[controller] & 0x0008 // headset adapter plugged in, but no headphones connected (mute?) +ControllerStatus[controller] & 0x0010 // 0 +ControllerStatus[controller] & 0x0020 // 1 +ControllerStatus[controller] & 0x0040 // battery level (high bit) +ControllerStatus[controller] & 0x0080 // battery level (low bit) +ControllerStatus[controller] & 0x0100 // 1 +ControllerStatus[controller] & 0x0200 // 1 +ControllerStatus[controller] & 0x0400 // headset adapter plugged in +ControllerStatus[controller] & 0x0800 // 0 +ControllerStatus[controller] & 0x1000 // 1 +ControllerStatus[controller] & 0x2000 // 0 +ControllerStatus[controller] & 0x4000 // 0 +ControllerStatus[controller] & 0x8000 // 0 + */ +uint8_t XBOXRECV::getBatteryLevel(uint8_t controller) { + return ((controllerStatus[controller] & 0x00C0) >> 6); +} + +void XBOXRECV::XboxCommand(uint8_t controller, uint8_t* data, uint16_t nbytes) { +#ifdef EXTRADEBUG + uint8_t rcode; +#endif + uint8_t outputPipe; + switch(controller) { + case 0: outputPipe = XBOX_OUTPUT_PIPE_1; + break; + case 1: outputPipe = XBOX_OUTPUT_PIPE_2; + break; + case 2: outputPipe = XBOX_OUTPUT_PIPE_3; + break; + case 3: outputPipe = XBOX_OUTPUT_PIPE_4; + break; + default: + return; + } +#ifdef EXTRADEBUG + rcode = +#endif + pUsb->outTransfer(bAddress, epInfo[ outputPipe ].epAddr, nbytes, data); +#ifdef EXTRADEBUG + if(rcode) + Notify(PSTR("Error sending Xbox message\r\n"), 0x80); +#endif +} + +void XBOXRECV::disconnect(uint8_t controller) { + writeBuf[0] = 0x00; + writeBuf[1] = 0x00; + writeBuf[2] = 0x08; + writeBuf[3] = 0xC0; + + XboxCommand(controller, writeBuf, 4); +} + +void XBOXRECV::setLedRaw(uint8_t value, uint8_t controller) { + writeBuf[0] = 0x00; + writeBuf[1] = 0x00; + writeBuf[2] = 0x08; + writeBuf[3] = value | 0x40; + + XboxCommand(controller, writeBuf, 4); +} + +void XBOXRECV::setLedOn(LEDEnum led, uint8_t controller) { + if(led == OFF) + setLedRaw(0, controller); + else if(led != ALL) // All LEDs can't be on a the same time + setLedRaw(pgm_read_byte(&XBOX_LEDS[(uint8_t)led]) + 4, controller); +} + +void XBOXRECV::setLedBlink(LEDEnum led, uint8_t controller) { + setLedRaw(pgm_read_byte(&XBOX_LEDS[(uint8_t)led]), controller); +} + +void XBOXRECV::setLedMode(LEDModeEnum ledMode, uint8_t controller) { // This function is used to do some speciel LED stuff the controller supports + setLedRaw((uint8_t)ledMode, controller); +} + +/* PC runs this at interval of approx 2 seconds +Thanks to BusHound from Perisoft.net for the Windows USB Analysis output +Found by timstamp.co.uk + */ +void XBOXRECV::checkStatus() { + if(!bPollEnable) + return; + // Get controller info + writeBuf[0] = 0x08; + writeBuf[1] = 0x00; + writeBuf[2] = 0x0f; + writeBuf[3] = 0xc0; + for(uint8_t i = 0; i < 4; i++) { + XboxCommand(i, writeBuf, 4); + } + // Get battery status + writeBuf[0] = 0x00; + writeBuf[1] = 0x00; + writeBuf[2] = 0x00; + writeBuf[3] = 0x40; + for(uint8_t i = 0; i < 4; i++) { + if(Xbox360Connected[i]) + XboxCommand(i, writeBuf, 4); + } +} + +void XBOXRECV::setRumbleOn(uint8_t lValue, uint8_t rValue, uint8_t controller) { + writeBuf[0] = 0x00; + writeBuf[1] = 0x01; + writeBuf[2] = 0x0f; + writeBuf[3] = 0xc0; + writeBuf[4] = 0x00; + writeBuf[5] = lValue; // big weight + writeBuf[6] = rValue; // small weight + + XboxCommand(controller, writeBuf, 7); +} + +void XBOXRECV::onInit(uint8_t controller) { + if(pFuncOnInit) + pFuncOnInit(); // Call the user function + else { + LEDEnum led; + if(controller == 0) + led = LED1; + else if(controller == 1) + led = LED2; + else if(controller == 2) + led = LED3; + else + led = LED4; + setLedOn(led, controller); + } +} |