summaryrefslogtreecommitdiff
path: root/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioInputHost/AudioInputHost.txt
diff options
context:
space:
mode:
Diffstat (limited to 'tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioInputHost/AudioInputHost.txt')
-rw-r--r--tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioInputHost/AudioInputHost.txt66
1 files changed, 66 insertions, 0 deletions
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioInputHost/AudioInputHost.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioInputHost/AudioInputHost.txt
new file mode 100644
index 0000000000..0736e0df47
--- /dev/null
+++ b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioInputHost/AudioInputHost.txt
@@ -0,0 +1,66 @@
+/** \file
+ *
+ * This file contains special DoxyGen information for the generation of the main page and other special
+ * documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Audio Input Host Demo
+ *
+ * \section Sec_Compat Demo Compatibility:
+ *
+ * The following list indicates what microcontrollers are compatible with this demo.
+ *
+ * \li Series 7 USB AVRs (AT90USBxxx7)
+ *
+ * \section Sec_Info USB Information:
+ *
+ * The following table gives a rundown of the USB utilization of this demo.
+ *
+ * <table>
+ * <tr>
+ * <td><b>USB Mode:</b></td>
+ * <td>Host</td>
+ * </tr>
+ * <tr>
+ * <td><b>USB Class:</b></td>
+ * <td>Audio Class</td>
+ * </tr>
+ * <tr>
+ * <td><b>USB Subclass:</b></td>
+ * <td>Standard Audio Device</td>
+ * </tr>
+ * <tr>
+ * <td><b>Relevant Standards:</b></td>
+ * <td>USBIF Audio 1.0 Class Specification \n
+ * USBIF Audio 1.0 Class Terminal Types Specification \n
+ * USBIF Audio 1.0 Data Formats Specification</td>
+ * </tr>
+ * <tr>
+ * <td><b>Supported USB Speeds:</b></td>
+ * <td>Full Speed Mode</td>
+ * </tr>
+ * </table>
+ *
+ * \section Sec_Description Project Description:
+ *
+ * Audio Input host demonstration application. This gives a simple reference
+ * application for implementing a USB Audio host, for USB Audio devices using
+ * the USB Audio 1.0 class profile.
+ *
+ * Incoming audio will output in 8-bit PWM onto the timer 3 output compare
+ * channel A, and will also be indicated on the board LEDs. Decouple the PWM
+ * output with a capacitor and attach to a speaker to hear the audio.
+ *
+ * \section Sec_Options Project Options
+ *
+ * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ * <table>
+ * <tr>
+ * <td>
+ * None
+ * </td>
+ * </tr>
+ * </table>
+ */
+