summaryrefslogtreecommitdiff
path: root/tmk_core/protocol/arm_atsam/md_rgb_matrix.c
diff options
context:
space:
mode:
Diffstat (limited to 'tmk_core/protocol/arm_atsam/md_rgb_matrix.c')
-rw-r--r--tmk_core/protocol/arm_atsam/md_rgb_matrix.c100
1 files changed, 84 insertions, 16 deletions
diff --git a/tmk_core/protocol/arm_atsam/md_rgb_matrix.c b/tmk_core/protocol/arm_atsam/md_rgb_matrix.c
index 98967aac88..0741584439 100644
--- a/tmk_core/protocol/arm_atsam/md_rgb_matrix.c
+++ b/tmk_core/protocol/arm_atsam/md_rgb_matrix.c
@@ -15,6 +15,10 @@ You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
+#define FLUSH_TIMEOUT 5000
+#define EECONFIG_MD_LED ((uint8_t*)(EECONFIG_SIZE + 64))
+#define MD_LED_CONFIG_VERSION 1
+
#ifdef RGB_MATRIX_ENABLE
# include "arm_atsam_protocol.h"
# include "led.h"
@@ -23,8 +27,41 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# include <math.h>
# ifdef USE_MASSDROP_CONFIGURATOR
+// TODO?: wire these up to keymap.c
+md_led_config_t md_led_config = {0};
+
+EECONFIG_DEBOUNCE_HELPER(md_led, EECONFIG_MD_LED, md_led_config);
+
+void eeconfig_update_md_led_default(void) {
+ md_led_config.ver = MD_LED_CONFIG_VERSION;
+
+ gcr_desired = LED_GCR_MAX;
+ led_animation_orientation = 0;
+ led_animation_direction = 0;
+ led_animation_breathing = 0;
+ led_animation_id = 0;
+ led_animation_speed = 4.0f;
+ led_lighting_mode = LED_MODE_NORMAL;
+ led_enabled = 1;
+ led_animation_breathe_cur = BREATHE_MIN_STEP;
+ breathe_dir = 1;
+ led_animation_circular = 0;
+ led_edge_brightness = 1.0f;
+ led_ratio_brightness = 1.0f;
+ led_edge_mode = LED_EDGE_MODE_ALL;
+
+ eeconfig_flush_md_led(true);
+}
+
+void md_led_changed(void) { eeconfig_flag_md_led(true); }
+
+// todo: use real task rather than this bodge
+void housekeeping_task_kb(void) { eeconfig_flush_md_led_task(FLUSH_TIMEOUT); }
+
__attribute__((weak)) led_instruction_t led_instructions[] = {{.end = 1}};
static void md_rgb_matrix_config_override(int i);
+# else
+uint8_t gcr_desired;
# endif // USE_MASSDROP_CONFIGURATOR
void SERCOM1_0_Handler(void) {
@@ -56,7 +93,6 @@ issi3733_driver_t issidrv[ISSI3733_DRIVER_COUNT];
issi3733_led_t led_map[ISSI3733_LED_COUNT] = ISSI3733_LED_MAP;
RGB led_buffer[ISSI3733_LED_COUNT];
-uint8_t gcr_desired;
uint8_t gcr_actual;
uint8_t gcr_actual_last;
# ifdef USE_MASSDROP_CONFIGURATOR
@@ -218,6 +254,13 @@ static void led_set_all(uint8_t r, uint8_t g, uint8_t b) {
static void init(void) {
DBGC(DC_LED_MATRIX_INIT_BEGIN);
+# ifdef USE_MASSDROP_CONFIGURATOR
+ eeconfig_init_md_led();
+ if (md_led_config.ver != MD_LED_CONFIG_VERSION) {
+ eeconfig_update_md_led_default();
+ }
+# endif
+
issi3733_prepare_arrays();
md_rgb_matrix_prepare();
@@ -331,17 +374,6 @@ const rgb_matrix_driver_t rgb_matrix_driver = {.init = init, .flush = flush, .se
# ifdef USE_MASSDROP_CONFIGURATOR
// Ported from Massdrop QMK GitHub Repo
-// TODO?: wire these up to keymap.c
-uint8_t led_animation_orientation = 0;
-uint8_t led_animation_direction = 0;
-uint8_t led_animation_breathing = 0;
-uint8_t led_animation_id = 0;
-float led_animation_speed = 4.0f;
-uint8_t led_lighting_mode = LED_MODE_NORMAL;
-uint8_t led_enabled = 1;
-uint8_t led_animation_breathe_cur = BREATHE_MIN_STEP;
-uint8_t breathe_dir = 1;
-
static void led_run_pattern(led_setup_t* f, float* ro, float* go, float* bo, float pos) {
float po;
@@ -398,16 +430,32 @@ static void led_run_pattern(led_setup_t* f, float* ro, float* go, float* bo, flo
}
}
+# define RGB_MAX_DISTANCE 232.9635f
+
static void md_rgb_matrix_config_override(int i) {
float ro = 0;
float go = 0;
float bo = 0;
-
- float po = (led_animation_orientation) ? (float)g_led_config.point[i].y / 64.f * 100 : (float)g_led_config.point[i].x / 224.f * 100;
+ float po;
uint8_t highest_active_layer = biton32(layer_state);
- if (led_lighting_mode == LED_MODE_KEYS_ONLY && HAS_FLAGS(g_led_config.flags[i], LED_FLAG_UNDERGLOW)) {
+ if (led_animation_circular) {
+ // TODO: should use min/max values from LED configuration instead of
+ // hard-coded 224, 64
+ // po = sqrtf((powf(fabsf((disp.width / 2) - (led_cur->x - disp.left)), 2) + powf(fabsf((disp.height / 2) - (led_cur->y - disp.bottom)), 2))) / disp.max_distance * 100;
+ po = sqrtf((powf(fabsf((224 / 2) - (float)g_led_config.point[i].x), 2) + powf(fabsf((64 / 2) - (float)g_led_config.point[i].y), 2))) / RGB_MAX_DISTANCE * 100;
+ } else {
+ if (led_animation_orientation) {
+ po = (float)g_led_config.point[i].y / 64.f * 100;
+ } else {
+ po = (float)g_led_config.point[i].x / 224.f * 100;
+ }
+ }
+
+ if (led_edge_mode == LED_EDGE_MODE_ALTERNATE && LED_IS_EDGE_ALT(led_map[i].scan)) {
+ // Do not act on this LED (Edge alternate lighting mode)
+ } else if (led_lighting_mode == LED_MODE_KEYS_ONLY && HAS_FLAGS(g_led_config.flags[i], LED_FLAG_UNDERGLOW)) {
// Do not act on this LED
} else if (led_lighting_mode == LED_MODE_NON_KEYS_ONLY && !HAS_FLAGS(g_led_config.flags[i], LED_FLAG_UNDERGLOW)) {
// Do not act on this LED
@@ -465,10 +513,30 @@ static void md_rgb_matrix_config_override(int i) {
}
}
+ // Adjust edge LED brightness
+ if (led_edge_brightness != 1 && LED_IS_EDGE(led_map[i].scan)) {
+ ro *= led_edge_brightness;
+ go *= led_edge_brightness;
+ bo *= led_edge_brightness;
+ }
+
+ // Adjust ratio of key vs. underglow (edge) LED brightness
+ if (LED_IS_EDGE(led_map[i].scan) && led_ratio_brightness > 1.0) {
+ // Decrease edge (underglow) LEDs
+ ro *= (2.0 - led_ratio_brightness);
+ go *= (2.0 - led_ratio_brightness);
+ bo *= (2.0 - led_ratio_brightness);
+ } else if (LED_IS_KEY(led_map[i].scan) && led_ratio_brightness < 1.0) {
+ // Decrease KEY LEDs
+ ro *= led_ratio_brightness;
+ go *= led_ratio_brightness;
+ bo *= led_ratio_brightness;
+ }
+
led_buffer[i].r = (uint8_t)ro;
led_buffer[i].g = (uint8_t)go;
led_buffer[i].b = (uint8_t)bo;
}
# endif // USE_MASSDROP_CONFIGURATOR
-#endif // RGB_MATRIX_ENABLE \ No newline at end of file
+#endif // RGB_MATRIX_ENABLE
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-11 10:17:43 +0000