summaryrefslogtreecommitdiff
path: root/quantum/mcu_selection.mk
diff options
context:
space:
mode:
Diffstat (limited to 'quantum/mcu_selection.mk')
-rw-r--r--quantum/mcu_selection.mk600
1 files changed, 0 insertions, 600 deletions
diff --git a/quantum/mcu_selection.mk b/quantum/mcu_selection.mk
deleted file mode 100644
index 3b86433a86..0000000000
--- a/quantum/mcu_selection.mk
+++ /dev/null
@@ -1,600 +0,0 @@
-MCU_ORIG := $(MCU)
-
-ifneq ($(findstring MKL26Z64, $(MCU)),)
- # Cortex version
- MCU = cortex-m0plus
-
- # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- ARMV = 6
-
- ## chip/board settings
- # - the next two should match the directories in
- # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY = KINETIS
- MCU_SERIES = KL2x
-
- # Linker script to use
- # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
- # or <keyboard_dir>/ld/
- MCU_LDSCRIPT ?= MKL26Z64
-
- # Startup code to use
- # - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
- MCU_STARTUP ?= kl2x
-
- # Board: it should exist either in <chibios>/os/hal/boards/,
- # <keyboard_dir>/boards/, or drivers/boards/
- BOARD ?= PJRC_TEENSY_LC
-endif
-
-ifneq ($(findstring MK20DX128, $(MCU)),)
- # Cortex version
- MCU = cortex-m4
-
- # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- ARMV = 7
-
- ## chip/board settings
- # - the next two should match the directories in
- # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY = KINETIS
- MCU_SERIES = K20x
-
- # Linker script to use
- # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
- # or <keyboard_dir>/ld/
- MCU_LDSCRIPT ?= MK20DX128
-
- # Startup code to use
- # - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
- MCU_STARTUP ?= k20x5
-
- # Board: it should exist either in <chibios>/os/hal/boards/,
- # <keyboard_dir>/boards/, or drivers/boards/
- BOARD ?= PJRC_TEENSY_3
-endif
-
-ifneq ($(findstring MK20DX256, $(MCU)),)
- # Cortex version
- MCU = cortex-m4
-
- # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- ARMV = 7
-
- ## chip/board settings
- # - the next two should match the directories in
- # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY = KINETIS
- MCU_SERIES = K20x
-
- # Linker script to use
- # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
- # or <keyboard_dir>/ld/
- MCU_LDSCRIPT ?= MK20DX256
-
- # Startup code to use
- # - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
- MCU_STARTUP ?= k20x7
-
- # Board: it should exist either in <chibios>/os/hal/boards/,
- # <keyboard_dir>/boards/, or drivers/boards/
- BOARD ?= PJRC_TEENSY_3_1
-endif
-
-ifneq ($(findstring MK66F18, $(MCU)),)
- # Cortex version
- MCU = cortex-m4
-
- # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- ARMV = 7
-
- ## chip/board settings
- # - the next two should match the directories in
- # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY = KINETIS
- MCU_SERIES = MK66F18
-
- # Linker script to use
- # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
- # or <keyboard_dir>/ld/
- MCU_LDSCRIPT ?= MK66FX1M0
-
- # Startup code to use
- # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
- MCU_STARTUP ?= MK66F18
-
- # Board: it should exist either in <chibios>/os/hal/boards/,
- # <keyboard_dir>/boards/, or drivers/boards/
- BOARD ?= PJRC_TEENSY_3_6
-endif
-
-ifneq ($(findstring STM32F042, $(MCU)),)
- # Cortex version
- MCU = cortex-m0
-
- # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- ARMV = 6
-
- ## chip/board settings
- # - the next two should match the directories in
- # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY = STM32
- MCU_SERIES = STM32F0xx
-
- # Linker script to use
- # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
- # or <keyboard_dir>/ld/
- MCU_LDSCRIPT ?= STM32F042x6
-
- # Startup code to use
- # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
- MCU_STARTUP ?= stm32f0xx
-
- # Board: it should exist either in <chibios>/os/hal/boards/,
- # <keyboard_dir>/boards/, or drivers/boards/
- BOARD ?= GENERIC_STM32_F042X6
-
- USE_FPU ?= no
-
- # UF2 settings
- UF2_FAMILY ?= STM32F0
-endif
-
-ifneq ($(findstring STM32F072, $(MCU)),)
- # Cortex version
- MCU = cortex-m0
-
- # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- ARMV = 6
-
- ## chip/board settings
- # - the next two should match the directories in
- # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY = STM32
- MCU_SERIES = STM32F0xx
-
- # Linker script to use
- # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
- # or <keyboard_dir>/ld/
- MCU_LDSCRIPT ?= STM32F072xB
-
- # Startup code to use
- # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
- MCU_STARTUP ?= stm32f0xx
-
- # Board: it should exist either in <chibios>/os/hal/boards/,
- # <keyboard_dir>/boards/, or drivers/boards/
- BOARD ?= GENERIC_STM32_F072XB
-
- USE_FPU ?= no
-
- # UF2 settings
- UF2_FAMILY ?= STM32F0
-endif
-
-ifneq ($(findstring STM32F103, $(MCU)),)
- # Cortex version
- MCU = cortex-m3
-
- # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- ARMV = 7
-
- ## chip/board settings
- # - the next two should match the directories in
- # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY = STM32
- MCU_SERIES = STM32F1xx
-
- # Linker script to use
- # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
- # or <keyboard_dir>/ld/
- MCU_LDSCRIPT ?= STM32F103x8
-
- # Startup code to use
- # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
- MCU_STARTUP ?= stm32f1xx
-
- # Board: it should exist either in <chibios>/os/hal/boards/,
- # <keyboard_dir>/boards/, or drivers/boards/
- BOARD ?= GENERIC_STM32_F103
-
- USE_FPU ?= no
-
- # UF2 settings
- UF2_FAMILY ?= STM32F1
-endif
-
-ifneq ($(findstring STM32F303, $(MCU)),)
- # Cortex version
- MCU = cortex-m4
-
- # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- ARMV = 7
-
- ## chip/board settings
- # - the next two should match the directories in
- # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY = STM32
- MCU_SERIES = STM32F3xx
-
- # Linker script to use
- # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
- # or <keyboard_dir>/ld/
- MCU_LDSCRIPT ?= STM32F303xC
-
- # Startup code to use
- # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
- MCU_STARTUP ?= stm32f3xx
-
- # Board: it should exist either in <chibios>/os/hal/boards/,
- # <keyboard_dir>/boards/, or drivers/boards/
- BOARD ?= GENERIC_STM32_F303XC
-
- USE_FPU ?= yes
-
- # UF2 settings
- UF2_FAMILY ?= STM32F3
-endif
-
-ifneq ($(findstring STM32F401, $(MCU)),)
- # Cortex version
- MCU = cortex-m4
-
- # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- ARMV = 7
-
- ## chip/board settings
- # - the next two should match the directories in
- # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY = STM32
- MCU_SERIES = STM32F4xx
-
- # Linker script to use
- # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
- # or <keyboard_dir>/ld/
- ifeq ($(strip $(BOOTLOADER)), tinyuf2)
- MCU_LDSCRIPT ?= STM32F401xC_tinyuf2
- FIRMWARE_FORMAT ?= uf2
- else
- MCU_LDSCRIPT ?= STM32F401xC
- endif
-
- # Startup code to use
- # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
- MCU_STARTUP ?= stm32f4xx
-
- # Board: it should exist either in <chibios>/os/hal/boards/,
- # <keyboard_dir>/boards/, or drivers/boards/
- BOARD ?= BLACKPILL_STM32_F401
-
- USE_FPU ?= yes
-
- # UF2 settings
- UF2_FAMILY ?= STM32F4
-endif
-
-ifneq ($(findstring STM32F407, $(MCU)),)
- # Cortex version
- MCU = cortex-m4
-
- # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- ARMV = 7
-
- ## chip/board settings
- # - the next two should match the directories in
- # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY = STM32
- MCU_SERIES = STM32F4xx
-
- # Linker script to use
- # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
- # or <keyboard_dir>/ld/
- MCU_LDSCRIPT ?= STM32F407xE
-
- # Startup code to use
- # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
- MCU_STARTUP ?= stm32f4xx
-
- # Board: it should exist either in <chibios>/os/hal/boards/,
- # <keyboard_dir>/boards/, or drivers/boards/
- BOARD ?= GENERIC_STM32_F407XE
-
- USE_FPU ?= yes
-
- # UF2 settings
- UF2_FAMILY ?= STM32F4
-endif
-
-ifneq ($(findstring STM32F411, $(MCU)),)
- # Cortex version
- MCU = cortex-m4
-
- # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- ARMV = 7
-
- ## chip/board settings
- # - the next two should match the directories in
- # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY = STM32
- MCU_SERIES = STM32F4xx
-
- # Linker script to use
- # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
- # or <keyboard_dir>/ld/
- ifeq ($(strip $(BOOTLOADER)), tinyuf2)
- MCU_LDSCRIPT ?= STM32F411xE_tinyuf2
- FIRMWARE_FORMAT ?= uf2
- else
- MCU_LDSCRIPT ?= STM32F411xE
- endif
-
- # Startup code to use
- # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
- MCU_STARTUP ?= stm32f4xx
-
- # Board: it should exist either in <chibios>/os/hal/boards/,
- # <keyboard_dir>/boards/, or drivers/boards/
- BOARD ?= BLACKPILL_STM32_F411
-
- USE_FPU ?= yes
-
- # UF2 settings
- UF2_FAMILY ?= STM32F4
-endif
-
-ifneq ($(findstring STM32F446, $(MCU)),)
- # Cortex version
- MCU = cortex-m4
-
- # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- ARMV = 7
-
- ## chip/board settings
- # - the next two should match the directories in
- # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY = STM32
- MCU_SERIES = STM32F4xx
-
- # Linker script to use
- # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
- # or <keyboard_dir>/ld/
- MCU_LDSCRIPT ?= STM32F446xE
-
- # Startup code to use
- # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
- MCU_STARTUP ?= stm32f4xx
-
- # Board: it should exist either in <chibios>/os/hal/boards/,
- # <keyboard_dir>/boards/, or drivers/boards/
- BOARD ?= GENERIC_STM32_F446XE
-
- USE_FPU ?= yes
-endif
-
-ifneq ($(findstring STM32G431, $(MCU)),)
- # Cortex version
- MCU = cortex-m4
-
- # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- ARMV = 7
-
- ## chip/board settings
- # - the next two should match the directories in
- # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY = STM32
- MCU_SERIES = STM32G4xx
-
- # Linker script to use
- # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
- # or <keyboard_dir>/ld/
- MCU_LDSCRIPT ?= STM32G431xB
-
- # Startup code to use
- # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
- MCU_STARTUP ?= stm32g4xx
-
- # Board: it should exist either in <chibios>/os/hal/boards/,
- # <keyboard_dir>/boards/, or drivers/boards/
- BOARD ?= GENERIC_STM32_G431XB
-
- USE_FPU ?= yes
-
- # UF2 settings
- UF2_FAMILY ?= STM32G4
-endif
-
-ifneq ($(findstring STM32G474, $(MCU)),)
- # Cortex version
- MCU = cortex-m4
-
- # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- ARMV = 7
-
- ## chip/board settings
- # - the next two should match the directories in
- # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY = STM32
- MCU_SERIES = STM32G4xx
-
- # Linker script to use
- # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
- # or <keyboard_dir>/ld/
- MCU_LDSCRIPT ?= STM32G474xE
-
- # Startup code to use
- # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
- MCU_STARTUP ?= stm32g4xx
-
- # Board: it should exist either in <chibios>/os/hal/boards/,
- # <keyboard_dir>/boards/, or drivers/boards/
- BOARD ?= GENERIC_STM32_G474XE
-
- USE_FPU ?= yes
-
- # UF2 settings
- UF2_FAMILY ?= STM32G4
-endif
-
-ifneq (,$(filter $(MCU),STM32L433 STM32L443))
- # Cortex version
- MCU = cortex-m4
-
- # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- ARMV = 7
-
- ## chip/board settings
- # - the next two should match the directories in
- # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY = STM32
- MCU_SERIES = STM32L4xx
-
- # Linker script to use
- # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
- # or <keyboard_dir>/ld/
- MCU_LDSCRIPT ?= STM32L432xC
-
- # Startup code to use
- # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
- MCU_STARTUP ?= stm32l4xx
-
- # Board: it should exist either in <chibios>/os/hal/boards/,
- # <keyboard_dir>/boards/, or drivers/boards/
- BOARD ?= GENERIC_STM32_L433XC
-
- PLATFORM_NAME ?= platform_l432
-
- USE_FPU ?= yes
-
- # UF2 settings
- UF2_FAMILY ?= STM32L4
-endif
-
-ifneq (,$(filter $(MCU),STM32L412 STM32L422))
- # Cortex version
- MCU = cortex-m4
-
- # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- ARMV = 7
-
- ## chip/board settings
- # - the next two should match the directories in
- # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY = STM32
- MCU_SERIES = STM32L4xx
-
- # Linker script to use
- # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
- # or <keyboard_dir>/ld/
- MCU_LDSCRIPT ?= STM32L412xB
-
- # Startup code to use
- # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
- MCU_STARTUP ?= stm32l4xx
-
- # Board: it should exist either in <chibios>/os/hal/boards/,
- # <keyboard_dir>/boards/, or drivers/boards/
- BOARD ?= GENERIC_STM32_L412XB
-
- PLATFORM_NAME ?= platform_l432
-
- USE_FPU ?= yes
-
- # UF2 settings
- UF2_FAMILY ?= STM32L4
-endif
-
-ifneq (,$(filter $(MCU),at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647 at90usb1286 at90usb1287))
- PROTOCOL = LUFA
-
- # Processor frequency.
- # This will define a symbol, F_CPU, in all source code files equal to the
- # processor frequency in Hz. You can then use this symbol in your source code to
- # calculate timings. Do NOT tack on a 'UL' at the end, this will be done
- # automatically to create a 32-bit value in your source code.
- #
- # This will be an integer division of F_USB below, as it is sourced by
- # F_USB after it has run through any CPU prescalers. Note that this value
- # does not *change* the processor frequency - it should merely be updated to
- # reflect the processor speed set externally so that the code can use accurate
- # software delays.
- F_CPU ?= 16000000
-
- # LUFA specific
- #
- # Target architecture (see library "Board Types" documentation).
- ARCH = AVR8
-
- # Input clock frequency.
- # This will define a symbol, F_USB, in all source code files equal to the
- # input clock frequency (before any prescaling is performed) in Hz. This value may
- # differ from F_CPU if prescaling is used on the latter, and is required as the
- # raw input clock is fed directly to the PLL sections of the AVR for high speed
- # clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
- # at the end, this will be done automatically to create a 32-bit value in your
- # source code.
- #
- # If no clock division is performed on the input clock inside the AVR (via the
- # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
- F_USB ?= $(F_CPU)
-
- # Interrupt driven control endpoint task
- ifeq (,$(filter $(NO_INTERRUPT_CONTROL_ENDPOINT),yes))
- OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
- endif
- ifneq (,$(filter $(MCU),at90usb162 atmega16u2 atmega32u2))
- NO_I2C = yes
- endif
-endif
-
-ifneq (,$(filter $(MCU),atmega32a))
- # MCU name for avrdude
- AVRDUDE_MCU = m32
-
- PROTOCOL = VUSB
-
- # Processor frequency.
- # This will define a symbol, F_CPU, in all source code files equal to the
- # processor frequency in Hz. You can then use this symbol in your source code to
- # calculate timings. Do NOT tack on a 'UL' at the end, this will be done
- # automatically to create a 32-bit value in your source code.
- F_CPU ?= 12000000
-endif
-
-ifneq (,$(filter $(MCU),atmega328p))
- # MCU name for avrdude
- AVRDUDE_MCU = m328p
-
- PROTOCOL = VUSB
-
- # Processor frequency.
- # This will define a symbol, F_CPU, in all source code files equal to the
- # processor frequency in Hz. You can then use this symbol in your source code to
- # calculate timings. Do NOT tack on a 'UL' at the end, this will be done
- # automatically to create a 32-bit value in your source code.
- F_CPU ?= 16000000
-endif
-
-ifneq (,$(filter $(MCU),atmega328))
- # MCU name for avrdude
- AVRDUDE_MCU = m328
-
- PROTOCOL = VUSB
-
- # Processor frequency.
- # This will define a symbol, F_CPU, in all source code files equal to the
- # processor frequency in Hz. You can then use this symbol in your source code to
- # calculate timings. Do NOT tack on a 'UL' at the end, this will be done
- # automatically to create a 32-bit value in your source code.
- F_CPU ?= 16000000
-endif
-
-ifneq (,$(filter $(MCU),attiny85))
- PROTOCOL = VUSB
-
- # Processor frequency.
- # This will define a symbol, F_CPU, in all source code files equal to the
- # processor frequency in Hz. You can then use this symbol in your source code to
- # calculate timings. Do NOT tack on a 'UL' at the end, this will be done
- # automatically to create a 32-bit value in your source code.
- F_CPU ?= 16500000
-endif