summaryrefslogtreecommitdiff
path: root/quantum/config_common.h
diff options
context:
space:
mode:
Diffstat (limited to 'quantum/config_common.h')
-rw-r--r--quantum/config_common.h116
1 files changed, 116 insertions, 0 deletions
diff --git a/quantum/config_common.h b/quantum/config_common.h
new file mode 100644
index 0000000000..da53fce89b
--- /dev/null
+++ b/quantum/config_common.h
@@ -0,0 +1,116 @@
+#ifndef CONFIG_DEFINITIONS_H
+#define CONFIG_DEFINITIONS_H
+
+#define B0 0x20
+#define B1 0x21
+#define B2 0x22
+#define B3 0x23
+#define B4 0x24
+#define B5 0x25
+#define B6 0x26
+#define B7 0x27
+#define C0 0x30
+#define C1 0x31
+#define C2 0x32
+#define C3 0x33
+#define C4 0x34
+#define C5 0x35
+#define C6 0x36
+#define C7 0x37
+#define D0 0x40
+#define D1 0x41
+#define D2 0x42
+#define D3 0x43
+#define D4 0x44
+#define D5 0x45
+#define D6 0x46
+#define D7 0x47
+#define E0 0x50
+#define E1 0x51
+#define E2 0x52
+#define E3 0x53
+#define E4 0x54
+#define E5 0x55
+#define E6 0x56
+#define E7 0x57
+#define F0 0x60
+#define F1 0x61
+#define F2 0x62
+#define F3 0x63
+#define F4 0x64
+#define F5 0x65
+#define F6 0x66
+#define F7 0x67
+
+#define COL2ROW 0x0
+#define ROW2COL 0x1
+
+#ifdef BLUETOOTH_ENABLE
+#ifdef __AVR_ATmega32U4__
+ #define SERIAL_UART_BAUD 9600
+ #define SERIAL_UART_DATA UDR1
+ #define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
+ #define SERIAL_UART_RXD_VECT USART1_RX_vect
+ #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1))
+ #define SERIAL_UART_INIT() do { \
+ UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \
+ UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \
+ UCSR1B = (1<<TXEN1); /* TX: enable */ \
+ UCSR1C = (0<<UPM11) | (0<<UPM10) | /* parity: none(00), even(01), odd(11) */ \
+ (0<<UCSZ12) | (1<<UCSZ11) | (1<<UCSZ10); /* data-8bit(011) */ \
+ sei(); \
+ } while(0)
+#else
+# error "USART configuration is needed."
+#endif
+
+
+// I'm fairly sure these aren't needed, but oh well - Jack
+
+/*
+ * PS/2 Interrupt configuration
+ */
+#ifdef PS2_USE_INT
+/* uses INT1 for clock line(ATMega32U4) */
+#define PS2_CLOCK_PORT PORTD
+#define PS2_CLOCK_PIN PIND
+#define PS2_CLOCK_DDR DDRD
+#define PS2_CLOCK_BIT 1
+
+#define PS2_DATA_PORT PORTD
+#define PS2_DATA_PIN PIND
+#define PS2_DATA_DDR DDRD
+#define PS2_DATA_BIT 0
+
+#define PS2_INT_INIT() do { \
+ EICRA |= ((1<<ISC11) | \
+ (0<<ISC10)); \
+} while (0)
+#define PS2_INT_ON() do { \
+ EIMSK |= (1<<INT1); \
+} while (0)
+#define PS2_INT_OFF() do { \
+ EIMSK &= ~(1<<INT1); \
+} while (0)
+#define PS2_INT_VECT INT1_vect
+#endif
+
+/*
+ * PS/2 Busywait configuration
+ */
+#ifdef PS2_USE_BUSYWAIT
+#define PS2_CLOCK_PORT PORTD
+#define PS2_CLOCK_PIN PIND
+#define PS2_CLOCK_DDR DDRD
+#define PS2_CLOCK_BIT 1
+
+#define PS2_DATA_PORT PORTD
+#define PS2_DATA_PIN PIND
+#define PS2_DATA_DDR DDRD
+#define PS2_DATA_BIT 0
+#endif
+
+#endif
+
+#endif
+