summaryrefslogtreecommitdiff
path: root/ps2_vusb/Makefile.orig
diff options
context:
space:
mode:
Diffstat (limited to 'ps2_vusb/Makefile.orig')
-rw-r--r--ps2_vusb/Makefile.orig165
1 files changed, 165 insertions, 0 deletions
diff --git a/ps2_vusb/Makefile.orig b/ps2_vusb/Makefile.orig
new file mode 100644
index 0000000000..2bd1ed584e
--- /dev/null
+++ b/ps2_vusb/Makefile.orig
@@ -0,0 +1,165 @@
+# Name: Makefile
+# Project: hid-mouse example
+# Author: Christian Starkjohann
+# Creation Date: 2008-04-07
+# Tabsize: 4
+# Copyright: (c) 2008 by OBJECTIVE DEVELOPMENT Software GmbH
+# License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
+# This Revision: $Id: Makefile 692 2008-11-07 15:07:40Z cs $
+
+DEVICE = atmega168
+F_CPU = 16000000 # in Hz
+FUSE_L = # see below for fuse values for particular devices
+FUSE_H =
+#AVRDUDE = avrdude -c usbasp -p $(DEVICE) # edit this line for your programmer
+AVRDUDE = avrdude -P COM1 -b 19200 -c arduino -p $(DEVICE)
+
+CFLAGS = -Iusbdrv -I. -DDEBUG_LEVEL=1
+OBJECTS = usbdrv/usbdrv.o usbdrv/usbdrvasm.o usbdrv/oddebug.o main.o
+
+COMPILE = avr-gcc -Wall -Os -DF_CPU=$(F_CPU) $(CFLAGS) -mmcu=$(DEVICE)
+
+##############################################################################
+# Fuse values for particular devices
+##############################################################################
+# If your device is not listed here, go to
+# http://palmavr.sourceforge.net/cgi-bin/fc.cgi
+# and choose options for external crystal clock and no clock divider
+#
+################################## ATMega8 ##################################
+# ATMega8 FUSE_L (Fuse low byte):
+# 0x9f = 1 0 0 1 1 1 1 1
+# ^ ^ \ / \--+--/
+# | | | +------- CKSEL 3..0 (external >8M crystal)
+# | | +--------------- SUT 1..0 (crystal osc, BOD enabled)
+# | +------------------ BODEN (BrownOut Detector enabled)
+# +-------------------- BODLEVEL (2.7V)
+# ATMega8 FUSE_H (Fuse high byte):
+# 0xc9 = 1 1 0 0 1 0 0 1 <-- BOOTRST (boot reset vector at 0x0000)
+# ^ ^ ^ ^ ^ ^ ^------ BOOTSZ0
+# | | | | | +-------- BOOTSZ1
+# | | | | + --------- EESAVE (don't preserve EEPROM over chip erase)
+# | | | +-------------- CKOPT (full output swing)
+# | | +---------------- SPIEN (allow serial programming)
+# | +------------------ WDTON (WDT not always on)
+# +-------------------- RSTDISBL (reset pin is enabled)
+#
+############################## ATMega48/88/168 ##############################
+# ATMega*8 FUSE_L (Fuse low byte):
+# 0xdf = 1 1 0 1 1 1 1 1
+# ^ ^ \ / \--+--/
+# | | | +------- CKSEL 3..0 (external >8M crystal)
+# | | +--------------- SUT 1..0 (crystal osc, BOD enabled)
+# | +------------------ CKOUT (if 0: Clock output enabled)
+# +-------------------- CKDIV8 (if 0: divide by 8)
+# ATMega*8 FUSE_H (Fuse high byte):
+# 0xde = 1 1 0 1 1 1 1 0
+# ^ ^ ^ ^ ^ \-+-/
+# | | | | | +------ BODLEVEL 0..2 (110 = 1.8 V)
+# | | | | + --------- EESAVE (preserve EEPROM over chip erase)
+# | | | +-------------- WDTON (if 0: watchdog always on)
+# | | +---------------- SPIEN (allow serial programming)
+# | +------------------ DWEN (debug wire enable)
+# +-------------------- RSTDISBL (reset pin is enabled)
+#
+############################## ATTiny25/45/85 ###############################
+# ATMega*5 FUSE_L (Fuse low byte):
+# 0xef = 1 1 1 0 1 1 1 1
+# ^ ^ \+/ \--+--/
+# | | | +------- CKSEL 3..0 (clock selection -> crystal @ 12 MHz)
+# | | +--------------- SUT 1..0 (BOD enabled, fast rising power)
+# | +------------------ CKOUT (clock output on CKOUT pin -> disabled)
+# +-------------------- CKDIV8 (divide clock by 8 -> don't divide)
+# ATMega*5 FUSE_H (Fuse high byte):
+# 0xdd = 1 1 0 1 1 1 0 1
+# ^ ^ ^ ^ ^ \-+-/
+# | | | | | +------ BODLEVEL 2..0 (brownout trigger level -> 2.7V)
+# | | | | +---------- EESAVE (preserve EEPROM on Chip Erase -> not preserved)
+# | | | +-------------- WDTON (watchdog timer always on -> disable)
+# | | +---------------- SPIEN (enable serial programming -> enabled)
+# | +------------------ DWEN (debug wire enable)
+# +-------------------- RSTDISBL (disable external reset -> enabled)
+#
+################################ ATTiny2313 #################################
+# ATTiny2313 FUSE_L (Fuse low byte):
+# 0xef = 1 1 1 0 1 1 1 1
+# ^ ^ \+/ \--+--/
+# | | | +------- CKSEL 3..0 (clock selection -> crystal @ 12 MHz)
+# | | +--------------- SUT 1..0 (BOD enabled, fast rising power)
+# | +------------------ CKOUT (clock output on CKOUT pin -> disabled)
+# +-------------------- CKDIV8 (divide clock by 8 -> don't divide)
+# ATTiny2313 FUSE_H (Fuse high byte):
+# 0xdb = 1 1 0 1 1 0 1 1
+# ^ ^ ^ ^ \-+-/ ^
+# | | | | | +---- RSTDISBL (disable external reset -> enabled)
+# | | | | +-------- BODLEVEL 2..0 (brownout trigger level -> 2.7V)
+# | | | +-------------- WDTON (watchdog timer always on -> disable)
+# | | +---------------- SPIEN (enable serial programming -> enabled)
+# | +------------------ EESAVE (preserve EEPROM on Chip Erase -> not preserved)
+# +-------------------- DWEN (debug wire enable)
+
+
+# symbolic targets:
+help:
+ @echo "This Makefile has no default rule. Use one of the following:"
+ @echo "make hex ....... to build main.hex"
+ @echo "make program ... to flash fuses and firmware"
+ @echo "make fuse ...... to flash the fuses"
+ @echo "make flash ..... to flash the firmware (use this on metaboard)"
+ @echo "make clean ..... to delete objects and hex file"
+
+hex: main.hex
+
+program: flash fuse
+
+# rule for programming fuse bits:
+fuse:
+ @[ "$(FUSE_H)" != "" -a "$(FUSE_L)" != "" ] || \
+ { echo "*** Edit Makefile and choose values for FUSE_L and FUSE_H!"; exit 1; }
+ $(AVRDUDE) -U hfuse:w:$(FUSE_H):m -U lfuse:w:$(FUSE_L):m
+
+# rule for uploading firmware:
+flash: main.hex
+ $(AVRDUDE) -U flash:w:main.hex:i
+
+# rule for deleting dependent files (those which can be built by Make):
+clean:
+ rm -f main.hex main.lst main.obj main.cof main.list main.map main.eep.hex main.elf *.o usbdrv/*.o main.s usbdrv/oddebug.s usbdrv/usbdrv.s
+
+# Generic rule for compiling C files:
+.c.o:
+ $(COMPILE) -c $< -o $@
+
+# Generic rule for assembling Assembler source files:
+.S.o:
+ $(COMPILE) -x assembler-with-cpp -c $< -o $@
+# "-x assembler-with-cpp" should not be necessary since this is the default
+# file type for the .S (with capital S) extension. However, upper case
+# characters are not always preserved on Windows. To ensure WinAVR
+# compatibility define the file type manually.
+
+# Generic rule for compiling C to assembler, used for debugging only.
+.c.s:
+ $(COMPILE) -S $< -o $@
+
+# file targets:
+
+# Since we don't want to ship the driver multipe times, we copy it into this project:
+usbdrv:
+ cp -r ../usbdrv .
+
+main.elf: usbdrv $(OBJECTS) # usbdrv dependency only needed because we copy it
+ $(COMPILE) -o main.elf $(OBJECTS)
+
+main.hex: main.elf
+ rm -f main.hex main.eep.hex
+ avr-objcopy -j .text -j .data -O ihex main.elf main.hex
+ avr-size main.hex
+
+# debugging targets:
+
+disasm: main.elf
+ avr-objdump -d main.elf
+
+cpp:
+ $(COMPILE) -E main.c