summaryrefslogtreecommitdiff
path: root/protocol/vusb/usbdrv/usbdrv.c
diff options
context:
space:
mode:
Diffstat (limited to 'protocol/vusb/usbdrv/usbdrv.c')
-rw-r--r--protocol/vusb/usbdrv/usbdrv.c625
1 files changed, 625 insertions, 0 deletions
diff --git a/protocol/vusb/usbdrv/usbdrv.c b/protocol/vusb/usbdrv/usbdrv.c
new file mode 100644
index 0000000000..21ed554f86
--- /dev/null
+++ b/protocol/vusb/usbdrv/usbdrv.c
@@ -0,0 +1,625 @@
+/* Name: usbdrv.c
+ * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
+ * Author: Christian Starkjohann
+ * Creation Date: 2004-12-29
+ * Tabsize: 4
+ * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
+ * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
+ * This Revision: $Id: usbdrv.c 791 2010-07-15 15:56:13Z cs $
+ */
+
+#include "usbportability.h"
+#include "usbdrv.h"
+#include "oddebug.h"
+
+/*
+General Description:
+This module implements the C-part of the USB driver. See usbdrv.h for a
+documentation of the entire driver.
+*/
+
+/* ------------------------------------------------------------------------- */
+
+/* raw USB registers / interface to assembler code: */
+uchar usbRxBuf[2*USB_BUFSIZE]; /* raw RX buffer: PID, 8 bytes data, 2 bytes CRC */
+uchar usbInputBufOffset; /* offset in usbRxBuf used for low level receiving */
+uchar usbDeviceAddr; /* assigned during enumeration, defaults to 0 */
+uchar usbNewDeviceAddr; /* device ID which should be set after status phase */
+uchar usbConfiguration; /* currently selected configuration. Administered by driver, but not used */
+volatile schar usbRxLen; /* = 0; number of bytes in usbRxBuf; 0 means free, -1 for flow control */
+uchar usbCurrentTok; /* last token received or endpoint number for last OUT token if != 0 */
+uchar usbRxToken; /* token for data we received; or endpont number for last OUT */
+volatile uchar usbTxLen = USBPID_NAK; /* number of bytes to transmit with next IN token or handshake token */
+uchar usbTxBuf[USB_BUFSIZE];/* data to transmit with next IN, free if usbTxLen contains handshake token */
+#if USB_COUNT_SOF
+volatile uchar usbSofCount; /* incremented by assembler module every SOF */
+#endif
+#if USB_CFG_HAVE_INTRIN_ENDPOINT && !USB_CFG_SUPPRESS_INTR_CODE
+usbTxStatus_t usbTxStatus1;
+# if USB_CFG_HAVE_INTRIN_ENDPOINT3
+usbTxStatus_t usbTxStatus3;
+# endif
+#endif
+#if USB_CFG_CHECK_DATA_TOGGLING
+uchar usbCurrentDataToken;/* when we check data toggling to ignore duplicate packets */
+#endif
+
+/* USB status registers / not shared with asm code */
+uchar *usbMsgPtr; /* data to transmit next -- ROM or RAM address */
+static usbMsgLen_t usbMsgLen = USB_NO_MSG; /* remaining number of bytes */
+static uchar usbMsgFlags; /* flag values see below */
+
+#define USB_FLG_MSGPTR_IS_ROM (1<<6)
+#define USB_FLG_USE_USER_RW (1<<7)
+
+/*
+optimizing hints:
+- do not post/pre inc/dec integer values in operations
+- assign value of USB_READ_FLASH() to register variables and don't use side effects in arg
+- use narrow scope for variables which should be in X/Y/Z register
+- assign char sized expressions to variables to force 8 bit arithmetics
+*/
+
+/* -------------------------- String Descriptors --------------------------- */
+
+#if USB_CFG_DESCR_PROPS_STRINGS == 0
+
+#if USB_CFG_DESCR_PROPS_STRING_0 == 0
+#undef USB_CFG_DESCR_PROPS_STRING_0
+#define USB_CFG_DESCR_PROPS_STRING_0 sizeof(usbDescriptorString0)
+PROGMEM char usbDescriptorString0[] = { /* language descriptor */
+ 4, /* sizeof(usbDescriptorString0): length of descriptor in bytes */
+ 3, /* descriptor type */
+ 0x09, 0x04, /* language index (0x0409 = US-English) */
+};
+#endif
+
+#if USB_CFG_DESCR_PROPS_STRING_VENDOR == 0 && USB_CFG_VENDOR_NAME_LEN
+#undef USB_CFG_DESCR_PROPS_STRING_VENDOR
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR sizeof(usbDescriptorStringVendor)
+PROGMEM int usbDescriptorStringVendor[] = {
+ USB_STRING_DESCRIPTOR_HEADER(USB_CFG_VENDOR_NAME_LEN),
+ USB_CFG_VENDOR_NAME
+};
+#endif
+
+#if USB_CFG_DESCR_PROPS_STRING_PRODUCT == 0 && USB_CFG_DEVICE_NAME_LEN
+#undef USB_CFG_DESCR_PROPS_STRING_PRODUCT
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT sizeof(usbDescriptorStringDevice)
+PROGMEM int usbDescriptorStringDevice[] = {
+ USB_STRING_DESCRIPTOR_HEADER(USB_CFG_DEVICE_NAME_LEN),
+ USB_CFG_DEVICE_NAME
+};
+#endif
+
+#if USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER == 0 && USB_CFG_SERIAL_NUMBER_LEN
+#undef USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER sizeof(usbDescriptorStringSerialNumber)
+PROGMEM int usbDescriptorStringSerialNumber[] = {
+ USB_STRING_DESCRIPTOR_HEADER(USB_CFG_SERIAL_NUMBER_LEN),
+ USB_CFG_SERIAL_NUMBER
+};
+#endif
+
+#endif /* USB_CFG_DESCR_PROPS_STRINGS == 0 */
+
+/* --------------------------- Device Descriptor --------------------------- */
+
+#if USB_CFG_DESCR_PROPS_DEVICE == 0
+#undef USB_CFG_DESCR_PROPS_DEVICE
+#define USB_CFG_DESCR_PROPS_DEVICE sizeof(usbDescriptorDevice)
+PROGMEM char usbDescriptorDevice[] = { /* USB device descriptor */
+ 18, /* sizeof(usbDescriptorDevice): length of descriptor in bytes */
+ USBDESCR_DEVICE, /* descriptor type */
+ 0x10, 0x01, /* USB version supported */
+ USB_CFG_DEVICE_CLASS,
+ USB_CFG_DEVICE_SUBCLASS,
+ 0, /* protocol */
+ 8, /* max packet size */
+ /* the following two casts affect the first byte of the constant only, but
+ * that's sufficient to avoid a warning with the default values.
+ */
+ (char)USB_CFG_VENDOR_ID,/* 2 bytes */
+ (char)USB_CFG_DEVICE_ID,/* 2 bytes */
+ USB_CFG_DEVICE_VERSION, /* 2 bytes */
+ USB_CFG_DESCR_PROPS_STRING_VENDOR != 0 ? 1 : 0, /* manufacturer string index */
+ USB_CFG_DESCR_PROPS_STRING_PRODUCT != 0 ? 2 : 0, /* product string index */
+ USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER != 0 ? 3 : 0, /* serial number string index */
+ 1, /* number of configurations */
+};
+#endif
+
+/* ----------------------- Configuration Descriptor ------------------------ */
+
+#if USB_CFG_DESCR_PROPS_HID_REPORT != 0 && USB_CFG_DESCR_PROPS_HID == 0
+#undef USB_CFG_DESCR_PROPS_HID
+#define USB_CFG_DESCR_PROPS_HID 9 /* length of HID descriptor in config descriptor below */
+#endif
+
+#if USB_CFG_DESCR_PROPS_CONFIGURATION == 0
+#undef USB_CFG_DESCR_PROPS_CONFIGURATION
+#define USB_CFG_DESCR_PROPS_CONFIGURATION sizeof(usbDescriptorConfiguration)
+PROGMEM char usbDescriptorConfiguration[] = { /* USB configuration descriptor */
+ 9, /* sizeof(usbDescriptorConfiguration): length of descriptor in bytes */
+ USBDESCR_CONFIG, /* descriptor type */
+ 18 + 7 * USB_CFG_HAVE_INTRIN_ENDPOINT + 7 * USB_CFG_HAVE_INTRIN_ENDPOINT3 +
+ (USB_CFG_DESCR_PROPS_HID & 0xff), 0,
+ /* total length of data returned (including inlined descriptors) */
+ 1, /* number of interfaces in this configuration */
+ 1, /* index of this configuration */
+ 0, /* configuration name string index */
+#if USB_CFG_IS_SELF_POWERED
+ (1 << 7) | USBATTR_SELFPOWER, /* attributes */
+#else
+ (1 << 7), /* attributes */
+#endif
+ USB_CFG_MAX_BUS_POWER/2, /* max USB current in 2mA units */
+/* interface descriptor follows inline: */
+ 9, /* sizeof(usbDescrInterface): length of descriptor in bytes */
+ USBDESCR_INTERFACE, /* descriptor type */
+ 0, /* index of this interface */
+ 0, /* alternate setting for this interface */
+ USB_CFG_HAVE_INTRIN_ENDPOINT + USB_CFG_HAVE_INTRIN_ENDPOINT3, /* endpoints excl 0: number of endpoint descriptors to follow */
+ USB_CFG_INTERFACE_CLASS,
+ USB_CFG_INTERFACE_SUBCLASS,
+ USB_CFG_INTERFACE_PROTOCOL,
+ 0, /* string index for interface */
+#if (USB_CFG_DESCR_PROPS_HID & 0xff) /* HID descriptor */
+ 9, /* sizeof(usbDescrHID): length of descriptor in bytes */
+ USBDESCR_HID, /* descriptor type: HID */
+ 0x01, 0x01, /* BCD representation of HID version */
+ 0x00, /* target country code */
+ 0x01, /* number of HID Report (or other HID class) Descriptor infos to follow */
+ 0x22, /* descriptor type: report */
+ USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH, 0, /* total length of report descriptor */
+#endif
+#if USB_CFG_HAVE_INTRIN_ENDPOINT /* endpoint descriptor for endpoint 1 */
+ 7, /* sizeof(usbDescrEndpoint) */
+ USBDESCR_ENDPOINT, /* descriptor type = endpoint */
+ (char)0x81, /* IN endpoint number 1 */
+ 0x03, /* attrib: Interrupt endpoint */
+ 8, 0, /* maximum packet size */
+ USB_CFG_INTR_POLL_INTERVAL, /* in ms */
+#endif
+#if USB_CFG_HAVE_INTRIN_ENDPOINT3 /* endpoint descriptor for endpoint 3 */
+ 7, /* sizeof(usbDescrEndpoint) */
+ USBDESCR_ENDPOINT, /* descriptor type = endpoint */
+ (char)(0x80 | USB_CFG_EP3_NUMBER), /* IN endpoint number 3 */
+ 0x03, /* attrib: Interrupt endpoint */
+ 8, 0, /* maximum packet size */
+ USB_CFG_INTR_POLL_INTERVAL, /* in ms */
+#endif
+};
+#endif
+
+/* ------------------------------------------------------------------------- */
+
+static inline void usbResetDataToggling(void)
+{
+#if USB_CFG_HAVE_INTRIN_ENDPOINT && !USB_CFG_SUPPRESS_INTR_CODE
+ USB_SET_DATATOKEN1(USB_INITIAL_DATATOKEN); /* reset data toggling for interrupt endpoint */
+# if USB_CFG_HAVE_INTRIN_ENDPOINT3
+ USB_SET_DATATOKEN3(USB_INITIAL_DATATOKEN); /* reset data toggling for interrupt endpoint */
+# endif
+#endif
+}
+
+static inline void usbResetStall(void)
+{
+#if USB_CFG_IMPLEMENT_HALT && USB_CFG_HAVE_INTRIN_ENDPOINT
+ usbTxLen1 = USBPID_NAK;
+#if USB_CFG_HAVE_INTRIN_ENDPOINT3
+ usbTxLen3 = USBPID_NAK;
+#endif
+#endif
+}
+
+/* ------------------------------------------------------------------------- */
+
+#if !USB_CFG_SUPPRESS_INTR_CODE
+#if USB_CFG_HAVE_INTRIN_ENDPOINT
+static void usbGenericSetInterrupt(uchar *data, uchar len, usbTxStatus_t *txStatus)
+{
+uchar *p;
+char i;
+
+#if USB_CFG_IMPLEMENT_HALT
+ if(usbTxLen1 == USBPID_STALL)
+ return;
+#endif
+ if(txStatus->len & 0x10){ /* packet buffer was empty */
+ txStatus->buffer[0] ^= USBPID_DATA0 ^ USBPID_DATA1; /* toggle token */
+ }else{
+ txStatus->len = USBPID_NAK; /* avoid sending outdated (overwritten) interrupt data */
+ }
+ p = txStatus->buffer + 1;
+ i = len;
+ do{ /* if len == 0, we still copy 1 byte, but that's no problem */
+ *p++ = *data++;
+ }while(--i > 0); /* loop control at the end is 2 bytes shorter than at beginning */
+ usbCrc16Append(&txStatus->buffer[1], len);
+ txStatus->len = len + 4; /* len must be given including sync byte */
+ DBG2(0x21 + (((int)txStatus >> 3) & 3), txStatus->buffer, len + 3);
+}
+
+USB_PUBLIC void usbSetInterrupt(uchar *data, uchar len)
+{
+ usbGenericSetInterrupt(data, len, &usbTxStatus1);
+}
+#endif
+
+#if USB_CFG_HAVE_INTRIN_ENDPOINT3
+USB_PUBLIC void usbSetInterrupt3(uchar *data, uchar len)
+{
+ usbGenericSetInterrupt(data, len, &usbTxStatus3);
+}
+#endif
+#endif /* USB_CFG_SUPPRESS_INTR_CODE */
+
+/* ------------------ utilities for code following below ------------------- */
+
+/* Use defines for the switch statement so that we can choose between an
+ * if()else if() and a switch/case based implementation. switch() is more
+ * efficient for a LARGE set of sequential choices, if() is better in all other
+ * cases.
+ */
+#if USB_CFG_USE_SWITCH_STATEMENT
+# define SWITCH_START(cmd) switch(cmd){{
+# define SWITCH_CASE(value) }break; case (value):{
+# define SWITCH_CASE2(v1,v2) }break; case (v1): case(v2):{
+# define SWITCH_CASE3(v1,v2,v3) }break; case (v1): case(v2): case(v3):{
+# define SWITCH_DEFAULT }break; default:{
+# define SWITCH_END }}
+#else
+# define SWITCH_START(cmd) {uchar _cmd = cmd; if(0){
+# define SWITCH_CASE(value) }else if(_cmd == (value)){
+# define SWITCH_CASE2(v1,v2) }else if(_cmd == (v1) || _cmd == (v2)){
+# define SWITCH_CASE3(v1,v2,v3) }else if(_cmd == (v1) || _cmd == (v2) || (_cmd == v3)){
+# define SWITCH_DEFAULT }else{
+# define SWITCH_END }}
+#endif
+
+#ifndef USB_RX_USER_HOOK
+#define USB_RX_USER_HOOK(data, len)
+#endif
+#ifndef USB_SET_ADDRESS_HOOK
+#define USB_SET_ADDRESS_HOOK()
+#endif
+
+/* ------------------------------------------------------------------------- */
+
+/* We use if() instead of #if in the macro below because #if can't be used
+ * in macros and the compiler optimizes constant conditions anyway.
+ * This may cause problems with undefined symbols if compiled without
+ * optimizing!
+ */
+#define GET_DESCRIPTOR(cfgProp, staticName) \
+ if(cfgProp){ \
+ if((cfgProp) & USB_PROP_IS_RAM) \
+ flags = 0; \
+ if((cfgProp) & USB_PROP_IS_DYNAMIC){ \
+ len = usbFunctionDescriptor(rq); \
+ }else{ \
+ len = USB_PROP_LENGTH(cfgProp); \
+ usbMsgPtr = (uchar *)(staticName); \
+ } \
+ }
+
+/* usbDriverDescriptor() is similar to usbFunctionDescriptor(), but used
+ * internally for all types of descriptors.
+ */
+static inline usbMsgLen_t usbDriverDescriptor(usbRequest_t *rq)
+{
+usbMsgLen_t len = 0;
+uchar flags = USB_FLG_MSGPTR_IS_ROM;
+
+ SWITCH_START(rq->wValue.bytes[1])
+ SWITCH_CASE(USBDESCR_DEVICE) /* 1 */
+ GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_DEVICE, usbDescriptorDevice)
+ SWITCH_CASE(USBDESCR_CONFIG) /* 2 */
+ GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_CONFIGURATION, usbDescriptorConfiguration)
+ SWITCH_CASE(USBDESCR_STRING) /* 3 */
+#if USB_CFG_DESCR_PROPS_STRINGS & USB_PROP_IS_DYNAMIC
+ if(USB_CFG_DESCR_PROPS_STRINGS & USB_PROP_IS_RAM)
+ flags = 0;
+ len = usbFunctionDescriptor(rq);
+#else /* USB_CFG_DESCR_PROPS_STRINGS & USB_PROP_IS_DYNAMIC */
+ SWITCH_START(rq->wValue.bytes[0])
+ SWITCH_CASE(0)
+ GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_STRING_0, usbDescriptorString0)
+ SWITCH_CASE(1)
+ GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_STRING_VENDOR, usbDescriptorStringVendor)
+ SWITCH_CASE(2)
+ GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_STRING_PRODUCT, usbDescriptorStringDevice)
+ SWITCH_CASE(3)
+ GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER, usbDescriptorStringSerialNumber)
+ SWITCH_DEFAULT
+ if(USB_CFG_DESCR_PROPS_UNKNOWN & USB_PROP_IS_DYNAMIC){
+ len = usbFunctionDescriptor(rq);
+ }
+ SWITCH_END
+#endif /* USB_CFG_DESCR_PROPS_STRINGS & USB_PROP_IS_DYNAMIC */
+#if USB_CFG_DESCR_PROPS_HID_REPORT /* only support HID descriptors if enabled */
+ SWITCH_CASE(USBDESCR_HID) /* 0x21 */
+ GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_HID, usbDescriptorConfiguration + 18)
+ SWITCH_CASE(USBDESCR_HID_REPORT)/* 0x22 */
+ GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_HID_REPORT, usbDescriptorHidReport)
+#endif
+ SWITCH_DEFAULT
+ if(USB_CFG_DESCR_PROPS_UNKNOWN & USB_PROP_IS_DYNAMIC){
+ len = usbFunctionDescriptor(rq);
+ }
+ SWITCH_END
+ usbMsgFlags = flags;
+ return len;
+}
+
+/* ------------------------------------------------------------------------- */
+
+/* usbDriverSetup() is similar to usbFunctionSetup(), but it's used for
+ * standard requests instead of class and custom requests.
+ */
+static inline usbMsgLen_t usbDriverSetup(usbRequest_t *rq)
+{
+uchar len = 0, *dataPtr = usbTxBuf + 9; /* there are 2 bytes free space at the end of the buffer */
+uchar value = rq->wValue.bytes[0];
+#if USB_CFG_IMPLEMENT_HALT
+uchar index = rq->wIndex.bytes[0];
+#endif
+
+ dataPtr[0] = 0; /* default reply common to USBRQ_GET_STATUS and USBRQ_GET_INTERFACE */
+ SWITCH_START(rq->bRequest)
+ SWITCH_CASE(USBRQ_GET_STATUS) /* 0 */
+ uchar recipient = rq->bmRequestType & USBRQ_RCPT_MASK; /* assign arith ops to variables to enforce byte size */
+ if(USB_CFG_IS_SELF_POWERED && recipient == USBRQ_RCPT_DEVICE)
+ dataPtr[0] = USB_CFG_IS_SELF_POWERED;
+#if USB_CFG_IMPLEMENT_HALT
+ if(recipient == USBRQ_RCPT_ENDPOINT && index == 0x81) /* request status for endpoint 1 */
+ dataPtr[0] = usbTxLen1 == USBPID_STALL;
+#endif
+ dataPtr[1] = 0;
+ len = 2;
+#if USB_CFG_IMPLEMENT_HALT
+ SWITCH_CASE2(USBRQ_CLEAR_FEATURE, USBRQ_SET_FEATURE) /* 1, 3 */
+ if(value == 0 && index == 0x81){ /* feature 0 == HALT for endpoint == 1 */
+ usbTxLen1 = rq->bRequest == USBRQ_CLEAR_FEATURE ? USBPID_NAK : USBPID_STALL;
+ usbResetDataToggling();
+ }
+#endif
+ SWITCH_CASE(USBRQ_SET_ADDRESS) /* 5 */
+ usbNewDeviceAddr = value;
+ USB_SET_ADDRESS_HOOK();
+ SWITCH_CASE(USBRQ_GET_DESCRIPTOR) /* 6 */
+ len = usbDriverDescriptor(rq);
+ goto skipMsgPtrAssignment;
+ SWITCH_CASE(USBRQ_GET_CONFIGURATION) /* 8 */
+ dataPtr = &usbConfiguration; /* send current configuration value */
+ len = 1;
+ SWITCH_CASE(USBRQ_SET_CONFIGURATION) /* 9 */
+ usbConfiguration = value;
+ usbResetStall();
+ SWITCH_CASE(USBRQ_GET_INTERFACE) /* 10 */
+ len = 1;
+#if USB_CFG_HAVE_INTRIN_ENDPOINT && !USB_CFG_SUPPRESS_INTR_CODE
+ SWITCH_CASE(USBRQ_SET_INTERFACE) /* 11 */
+ usbResetDataToggling();
+ usbResetStall();
+#endif
+ SWITCH_DEFAULT /* 7=SET_DESCRIPTOR, 12=SYNC_FRAME */
+ /* Should we add an optional hook here? */
+ SWITCH_END
+ usbMsgPtr = dataPtr;
+skipMsgPtrAssignment:
+ return len;
+}
+
+/* ------------------------------------------------------------------------- */
+
+/* usbProcessRx() is called for every message received by the interrupt
+ * routine. It distinguishes between SETUP and DATA packets and processes
+ * them accordingly.
+ */
+static inline void usbProcessRx(uchar *data, uchar len)
+{
+usbRequest_t *rq = (void *)data;
+
+/* usbRxToken can be:
+ * 0x2d 00101101 (USBPID_SETUP for setup data)
+ * 0xe1 11100001 (USBPID_OUT: data phase of setup transfer)
+ * 0...0x0f for OUT on endpoint X
+ */
+ DBG2(0x10 + (usbRxToken & 0xf), data, len + 2); /* SETUP=1d, SETUP-DATA=11, OUTx=1x */
+ USB_RX_USER_HOOK(data, len)
+#if USB_CFG_IMPLEMENT_FN_WRITEOUT
+ if(usbRxToken < 0x10){ /* OUT to endpoint != 0: endpoint number in usbRxToken */
+ usbFunctionWriteOut(data, len);
+ return;
+ }
+#endif
+ if(usbRxToken == (uchar)USBPID_SETUP){
+ if(len != 8) /* Setup size must be always 8 bytes. Ignore otherwise. */
+ return;
+ usbMsgLen_t replyLen;
+ usbTxBuf[0] = USBPID_DATA0; /* initialize data toggling */
+ usbTxLen = USBPID_NAK; /* abort pending transmit */
+ usbMsgFlags = 0;
+ uchar type = rq->bmRequestType & USBRQ_TYPE_MASK;
+ if(type != USBRQ_TYPE_STANDARD){ /* standard requests are handled by driver */
+ replyLen = usbFunctionSetup(data);
+ }else{
+ replyLen = usbDriverSetup(rq);
+ }
+#if USB_CFG_IMPLEMENT_FN_READ || USB_CFG_IMPLEMENT_FN_WRITE
+ if(replyLen == USB_NO_MSG){ /* use user-supplied read/write function */
+ /* do some conditioning on replyLen, but on IN transfers only */
+ if((rq->bmRequestType & USBRQ_DIR_MASK) != USBRQ_DIR_HOST_TO_DEVICE){
+ if(sizeof(replyLen) < sizeof(rq->wLength.word)){ /* help compiler with optimizing */
+ replyLen = rq->wLength.bytes[0];
+ }else{
+ replyLen = rq->wLength.word;
+ }
+ }
+ usbMsgFlags = USB_FLG_USE_USER_RW;
+ }else /* The 'else' prevents that we limit a replyLen of USB_NO_MSG to the maximum transfer len. */
+#endif
+ if(sizeof(replyLen) < sizeof(rq->wLength.word)){ /* help compiler with optimizing */
+ if(!rq->wLength.bytes[1] && replyLen > rq->wLength.bytes[0]) /* limit length to max */
+ replyLen = rq->wLength.bytes[0];
+ }else{
+ if(replyLen > rq->wLength.word) /* limit length to max */
+ replyLen = rq->wLength.word;
+ }
+ usbMsgLen = replyLen;
+ }else{ /* usbRxToken must be USBPID_OUT, which means data phase of setup (control-out) */
+#if USB_CFG_IMPLEMENT_FN_WRITE
+ if(usbMsgFlags & USB_FLG_USE_USER_RW){
+ uchar rval = usbFunctionWrite(data, len);
+ if(rval == 0xff){ /* an error occurred */
+ usbTxLen = USBPID_STALL;
+ }else if(rval != 0){ /* This was the final package */
+ usbMsgLen = 0; /* answer with a zero-sized data packet */
+ }
+ }
+#endif
+ }
+}
+
+/* ------------------------------------------------------------------------- */
+
+/* This function is similar to usbFunctionRead(), but it's also called for
+ * data handled automatically by the driver (e.g. descriptor reads).
+ */
+static uchar usbDeviceRead(uchar *data, uchar len)
+{
+ if(len > 0){ /* don't bother app with 0 sized reads */
+#if USB_CFG_IMPLEMENT_FN_READ
+ if(usbMsgFlags & USB_FLG_USE_USER_RW){
+ len = usbFunctionRead(data, len);
+ }else
+#endif
+ {
+ uchar i = len, *r = usbMsgPtr;
+ if(usbMsgFlags & USB_FLG_MSGPTR_IS_ROM){ /* ROM data */
+ do{
+ uchar c = USB_READ_FLASH(r); /* assign to char size variable to enforce byte ops */
+ *data++ = c;
+ r++;
+ }while(--i);
+ }else{ /* RAM data */
+ do{
+ *data++ = *r++;
+ }while(--i);
+ }
+ usbMsgPtr = r;
+ }
+ }
+ return len;
+}
+
+/* ------------------------------------------------------------------------- */
+
+/* usbBuildTxBlock() is called when we have data to transmit and the
+ * interrupt routine's transmit buffer is empty.
+ */
+static inline void usbBuildTxBlock(void)
+{
+usbMsgLen_t wantLen;
+uchar len;
+
+ wantLen = usbMsgLen;
+ if(wantLen > 8)
+ wantLen = 8;
+ usbMsgLen -= wantLen;
+ usbTxBuf[0] ^= USBPID_DATA0 ^ USBPID_DATA1; /* DATA toggling */
+ len = usbDeviceRead(usbTxBuf + 1, wantLen);
+ if(len <= 8){ /* valid data packet */
+ usbCrc16Append(&usbTxBuf[1], len);
+ len += 4; /* length including sync byte */
+ if(len < 12) /* a partial package identifies end of message */
+ usbMsgLen = USB_NO_MSG;
+ }else{
+ len = USBPID_STALL; /* stall the endpoint */
+ usbMsgLen = USB_NO_MSG;
+ }
+ usbTxLen = len;
+ DBG2(0x20, usbTxBuf, len-1);
+}
+
+/* ------------------------------------------------------------------------- */
+
+static inline void usbHandleResetHook(uchar notResetState)
+{
+#ifdef USB_RESET_HOOK
+static uchar wasReset;
+uchar isReset = !notResetState;
+
+ if(wasReset != isReset){
+ USB_RESET_HOOK(isReset);
+ wasReset = isReset;
+ }
+#endif
+}
+
+/* ------------------------------------------------------------------------- */
+
+USB_PUBLIC void usbPoll(void)
+{
+schar len;
+uchar i;
+
+ len = usbRxLen - 3;
+ if(len >= 0){
+/* We could check CRC16 here -- but ACK has already been sent anyway. If you
+ * need data integrity checks with this driver, check the CRC in your app
+ * code and report errors back to the host. Since the ACK was already sent,
+ * retries must be handled on application level.
+ * unsigned crc = usbCrc16(buffer + 1, usbRxLen - 3);
+ */
+ usbProcessRx(usbRxBuf + USB_BUFSIZE + 1 - usbInputBufOffset, len);
+#if USB_CFG_HAVE_FLOWCONTROL
+ if(usbRxLen > 0) /* only mark as available if not inactivated */
+ usbRxLen = 0;
+#else
+ usbRxLen = 0; /* mark rx buffer as available */
+#endif
+ }
+ if(usbTxLen & 0x10){ /* transmit system idle */
+ if(usbMsgLen != USB_NO_MSG){ /* transmit data pending? */
+ usbBuildTxBlock();
+ }
+ }
+ for(i = 20; i > 0; i--){
+ uchar usbLineStatus = USBIN & USBMASK;
+ if(usbLineStatus != 0) /* SE0 has ended */
+ goto isNotReset;
+ }
+ /* RESET condition, called multiple times during reset */
+ usbNewDeviceAddr = 0;
+ usbDeviceAddr = 0;
+ usbResetStall();
+ DBG1(0xff, 0, 0);
+isNotReset:
+ usbHandleResetHook(i);
+}
+
+/* ------------------------------------------------------------------------- */
+
+USB_PUBLIC void usbInit(void)
+{
+#if USB_INTR_CFG_SET != 0
+ USB_INTR_CFG |= USB_INTR_CFG_SET;
+#endif
+#if USB_INTR_CFG_CLR != 0
+ USB_INTR_CFG &= ~(USB_INTR_CFG_CLR);
+#endif
+ USB_INTR_ENABLE |= (1 << USB_INTR_ENABLE_BIT);
+ usbResetDataToggling();
+#if USB_CFG_HAVE_INTRIN_ENDPOINT && !USB_CFG_SUPPRESS_INTR_CODE
+ usbTxLen1 = USBPID_NAK;
+#if USB_CFG_HAVE_INTRIN_ENDPOINT3
+ usbTxLen3 = USBPID_NAK;
+#endif
+#endif
+}
+
+/* ------------------------------------------------------------------------- */