diff options
Diffstat (limited to 'protocol/usb_hid/USB_Host_Shield_2.0/usbhub.cpp')
| m--------- | protocol/usb_hid/USB_Host_Shield_2.0 | 0 | ||||
| -rw-r--r-- | protocol/usb_hid/USB_Host_Shield_2.0/usbhub.cpp | 425 |
2 files changed, 425 insertions, 0 deletions
diff --git a/protocol/usb_hid/USB_Host_Shield_2.0 b/protocol/usb_hid/USB_Host_Shield_2.0 deleted file mode 160000 -Subproject 7c2e6c1bcdcc22cfdbd82edd9d8fc4c4276ead4 diff --git a/protocol/usb_hid/USB_Host_Shield_2.0/usbhub.cpp b/protocol/usb_hid/USB_Host_Shield_2.0/usbhub.cpp new file mode 100644 index 0000000000..7fed48e781 --- /dev/null +++ b/protocol/usb_hid/USB_Host_Shield_2.0/usbhub.cpp @@ -0,0 +1,425 @@ +/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved. + +This software may be distributed and modified under the terms of the GNU +General Public License version 2 (GPL2) as published by the Free Software +Foundation and appearing in the file GPL2.TXT included in the packaging of +this file. Please note that GPL2 Section 2[b] requires that all works based +on this software must also be made publicly available under the terms of +the GPL2 ("Copyleft"). + +Contact information +------------------- + +Circuits At Home, LTD +Web : http://www.circuitsathome.com +e-mail : support@circuitsathome.com + */ +#include "usbhub.h" + +bool USBHub::bResetInitiated = false; + +USBHub::USBHub(USB *p) : +pUsb(p), +bAddress(0), +bNbrPorts(0), +//bInitState(0), +qNextPollTime(0), +bPollEnable(false) { + epInfo[0].epAddr = 0; + epInfo[0].maxPktSize = 8; + epInfo[0].epAttribs = 0; + epInfo[0].bmNakPower = USB_NAK_MAX_POWER; + + epInfo[1].epAddr = 1; + epInfo[1].maxPktSize = 8; //kludge + epInfo[1].epAttribs = 0; + epInfo[1].bmNakPower = USB_NAK_NOWAIT; + + if(pUsb) + pUsb->RegisterDeviceClass(this); +} + +uint8_t USBHub::Init(uint8_t parent, uint8_t port, bool lowspeed) { + uint8_t buf[32]; + USB_DEVICE_DESCRIPTOR * udd = reinterpret_cast<USB_DEVICE_DESCRIPTOR*>(buf); + HubDescriptor* hd = reinterpret_cast<HubDescriptor*>(buf); + USB_CONFIGURATION_DESCRIPTOR * ucd = reinterpret_cast<USB_CONFIGURATION_DESCRIPTOR*>(buf); + uint8_t rcode; + UsbDevice *p = NULL; + EpInfo *oldep_ptr = NULL; + uint8_t len = 0; + uint16_t cd_len = 0; + + //USBTRACE("\r\nHub Init Start "); + //D_PrintHex<uint8_t > (bInitState, 0x80); + + AddressPool &addrPool = pUsb->GetAddressPool(); + + //switch (bInitState) { + // case 0: + if(bAddress) + return USB_ERROR_CLASS_INSTANCE_ALREADY_IN_USE; + + // Get pointer to pseudo device with address 0 assigned + p = addrPool.GetUsbDevicePtr(0); + + if(!p) + return USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL; + + if(!p->epinfo) + return USB_ERROR_EPINFO_IS_NULL; + + // Save old pointer to EP_RECORD of address 0 + oldep_ptr = p->epinfo; + + // Temporary assign new pointer to epInfo to p->epinfo in order to avoid toggle inconsistence + p->epinfo = epInfo; + + p->lowspeed = lowspeed; + + // Get device descriptor + rcode = pUsb->getDevDescr(0, 0, 8, (uint8_t*)buf); + + p->lowspeed = false; + + if(!rcode) + len = (buf[0] > 32) ? 32 : buf[0]; + + if(rcode) { + // Restore p->epinfo + p->epinfo = oldep_ptr; + return rcode; + } + + // Extract device class from device descriptor + // If device class is not a hub return + if(udd->bDeviceClass != 0x09) + return USB_DEV_CONFIG_ERROR_DEVICE_NOT_SUPPORTED; + + // Allocate new address according to device class + bAddress = addrPool.AllocAddress(parent, (udd->bDeviceClass == 0x09) ? true : false, port); + + if(!bAddress) + return USB_ERROR_OUT_OF_ADDRESS_SPACE_IN_POOL; + + // Extract Max Packet Size from the device descriptor + epInfo[0].maxPktSize = udd->bMaxPacketSize0; + + // Assign new address to the device + rcode = pUsb->setAddr(0, 0, bAddress); + + if(rcode) { + // Restore p->epinfo + p->epinfo = oldep_ptr; + addrPool.FreeAddress(bAddress); + bAddress = 0; + return rcode; + } + + //USBTRACE2("\r\nHub address: ", bAddress ); + + // Restore p->epinfo + p->epinfo = oldep_ptr; + + if(len) + rcode = pUsb->getDevDescr(bAddress, 0, len, (uint8_t*)buf); + + if(rcode) + goto FailGetDevDescr; + + // Assign epInfo to epinfo pointer + rcode = pUsb->setEpInfoEntry(bAddress, 2, epInfo); + + if(rcode) + goto FailSetDevTblEntry; + + // bInitState = 1; + + // case 1: + // Get hub descriptor + rcode = GetHubDescriptor(0, 8, buf); + + if(rcode) + goto FailGetHubDescr; + + // Save number of ports for future use + bNbrPorts = hd->bNbrPorts; + + // bInitState = 2; + + // case 2: + // Read configuration Descriptor in Order To Obtain Proper Configuration Value + rcode = pUsb->getConfDescr(bAddress, 0, 8, 0, buf); + + if(!rcode) { + cd_len = ucd->wTotalLength; + rcode = pUsb->getConfDescr(bAddress, 0, cd_len, 0, buf); + } + if(rcode) + goto FailGetConfDescr; + + // The following code is of no practical use in real life applications. + // It only intended for the usb protocol sniffer to properly parse hub-class requests. + { + uint8_t buf2[24]; + + rcode = pUsb->getConfDescr(bAddress, 0, buf[0], 0, buf2); + + if(rcode) + goto FailGetConfDescr; + } + + // Set Configuration Value + rcode = pUsb->setConf(bAddress, 0, buf[5]); + + if(rcode) + goto FailSetConfDescr; + + // bInitState = 3; + + // case 3: + // Power on all ports + for(uint8_t j = 1; j <= bNbrPorts; j++) + SetPortFeature(HUB_FEATURE_PORT_POWER, j, 0); //HubPortPowerOn(j); + + pUsb->SetHubPreMask(); + bPollEnable = true; + // bInitState = 0; + //} + //bInitState = 0; + //USBTRACE("...OK\r\n"); + return 0; + + // Oleg, No debugging?? -- xxxajk +FailGetDevDescr: + goto Fail; + +FailSetDevTblEntry: + goto Fail; + +FailGetHubDescr: + goto Fail; + +FailGetConfDescr: + goto Fail; + +FailSetConfDescr: + goto Fail; + +Fail: + USBTRACE("...FAIL\r\n"); + return rcode; +} + +uint8_t USBHub::Release() { + pUsb->GetAddressPool().FreeAddress(bAddress); + + if(bAddress == 0x41) + pUsb->SetHubPreMask(); + + bAddress = 0; + bNbrPorts = 0; + qNextPollTime = 0; + bPollEnable = false; + return 0; +} + +uint8_t USBHub::Poll() { + uint8_t rcode = 0; + + if(!bPollEnable) + return 0; + + if(((long)(millis() - qNextPollTime) >= 0L)) { + rcode = CheckHubStatus(); + qNextPollTime = millis() + 100; + } + return rcode; +} + +uint8_t USBHub::CheckHubStatus() { + uint8_t rcode; + uint8_t buf[8]; + uint16_t read = 1; + + rcode = pUsb->inTransfer(bAddress, 1, &read, buf); + + if(rcode) + return rcode; + + //if (buf[0] & 0x01) // Hub Status Change + //{ + // pUsb->PrintHubStatus(addr); + // rcode = GetHubStatus(1, 0, 1, 4, buf); + // if (rcode) + // { + // USB_HOST_SERIAL.print("GetHubStatus Error"); + // USB_HOST_SERIAL.println(rcode, HEX); + // return rcode; + // } + //} + for(uint8_t port = 1, mask = 0x02; port < 8; mask <<= 1, port++) { + if(buf[0] & mask) { + HubEvent evt; + evt.bmEvent = 0; + + rcode = GetPortStatus(port, 4, evt.evtBuff); + + if(rcode) + continue; + + rcode = PortStatusChange(port, evt); + + if(rcode == HUB_ERROR_PORT_HAS_BEEN_RESET) + return 0; + + if(rcode) + return rcode; + } + } // for + + for(uint8_t port = 1; port <= bNbrPorts; port++) { + HubEvent evt; + evt.bmEvent = 0; + + rcode = GetPortStatus(port, 4, evt.evtBuff); + + if(rcode) + continue; + + if((evt.bmStatus & bmHUB_PORT_STATE_CHECK_DISABLED) != bmHUB_PORT_STATE_DISABLED) + continue; + + // Emulate connection event for the port + evt.bmChange |= bmHUB_PORT_STATUS_C_PORT_CONNECTION; + + rcode = PortStatusChange(port, evt); + + if(rcode == HUB_ERROR_PORT_HAS_BEEN_RESET) + return 0; + + if(rcode) + return rcode; + } // for + return 0; +} + +void USBHub::ResetHubPort(uint8_t port) { + HubEvent evt; + evt.bmEvent = 0; + uint8_t rcode; + + ClearPortFeature(HUB_FEATURE_C_PORT_ENABLE, port, 0); + ClearPortFeature(HUB_FEATURE_C_PORT_CONNECTION, port, 0); + SetPortFeature(HUB_FEATURE_PORT_RESET, port, 0); + + + for(int i = 0; i < 3; i++) { + rcode = GetPortStatus(port, 4, evt.evtBuff); + if(rcode) break; // Some kind of error, bail. + if(evt.bmEvent == bmHUB_PORT_EVENT_RESET_COMPLETE || evt.bmEvent == bmHUB_PORT_EVENT_LS_RESET_COMPLETE) { + break; + } + delay(100); // simulate polling. + } + ClearPortFeature(HUB_FEATURE_C_PORT_RESET, port, 0); + ClearPortFeature(HUB_FEATURE_C_PORT_CONNECTION, port, 0); + delay(20); +} + +uint8_t USBHub::PortStatusChange(uint8_t port, HubEvent &evt) { + switch(evt.bmEvent) { + // Device connected event + case bmHUB_PORT_EVENT_CONNECT: + case bmHUB_PORT_EVENT_LS_CONNECT: + if(bResetInitiated) + return 0; + + ClearPortFeature(HUB_FEATURE_C_PORT_ENABLE, port, 0); + ClearPortFeature(HUB_FEATURE_C_PORT_CONNECTION, port, 0); + SetPortFeature(HUB_FEATURE_PORT_RESET, port, 0); + bResetInitiated = true; + return HUB_ERROR_PORT_HAS_BEEN_RESET; + + // Device disconnected event + case bmHUB_PORT_EVENT_DISCONNECT: + ClearPortFeature(HUB_FEATURE_C_PORT_ENABLE, port, 0); + ClearPortFeature(HUB_FEATURE_C_PORT_CONNECTION, port, 0); + bResetInitiated = false; + + UsbDeviceAddress a; + a.devAddress = 0; + a.bmHub = 0; + a.bmParent = bAddress; + a.bmAddress = port; + pUsb->ReleaseDevice(a.devAddress); + return 0; + + // Reset complete event + case bmHUB_PORT_EVENT_RESET_COMPLETE: + case bmHUB_PORT_EVENT_LS_RESET_COMPLETE: + ClearPortFeature(HUB_FEATURE_C_PORT_RESET, port, 0); + ClearPortFeature(HUB_FEATURE_C_PORT_CONNECTION, port, 0); + + delay(20); + + a.devAddress = bAddress; + + pUsb->Configuring(a.bmAddress, port, (evt.bmStatus & bmHUB_PORT_STATUS_PORT_LOW_SPEED)); + bResetInitiated = false; + break; + + } // switch (evt.bmEvent) + return 0; +} + +void PrintHubPortStatus(USBHub *hubptr, uint8_t addr, uint8_t port, bool print_changes) { + uint8_t rcode = 0; + HubEvent evt; + + rcode = hubptr->GetPortStatus(port, 4, evt.evtBuff); + + if(rcode) { + USB_HOST_SERIAL.println("ERROR!"); + return; + } + USB_HOST_SERIAL.print("\r\nPort "); + USB_HOST_SERIAL.println(port, DEC); + + USB_HOST_SERIAL.println("Status"); + USB_HOST_SERIAL.print("CONNECTION:\t"); + USB_HOST_SERIAL.println((evt.bmStatus & bmHUB_PORT_STATUS_PORT_CONNECTION) > 0, DEC); + USB_HOST_SERIAL.print("ENABLE:\t\t"); + USB_HOST_SERIAL.println((evt.bmStatus & bmHUB_PORT_STATUS_PORT_ENABLE) > 0, DEC); + USB_HOST_SERIAL.print("SUSPEND:\t"); + USB_HOST_SERIAL.println((evt.bmStatus & bmHUB_PORT_STATUS_PORT_SUSPEND) > 0, DEC); + USB_HOST_SERIAL.print("OVER_CURRENT:\t"); + USB_HOST_SERIAL.println((evt.bmStatus & bmHUB_PORT_STATUS_PORT_OVER_CURRENT) > 0, DEC); + USB_HOST_SERIAL.print("RESET:\t\t"); + USB_HOST_SERIAL.println((evt.bmStatus & bmHUB_PORT_STATUS_PORT_RESET) > 0, DEC); + USB_HOST_SERIAL.print("POWER:\t\t"); + USB_HOST_SERIAL.println((evt.bmStatus & bmHUB_PORT_STATUS_PORT_POWER) > 0, DEC); + USB_HOST_SERIAL.print("LOW_SPEED:\t"); + USB_HOST_SERIAL.println((evt.bmStatus & bmHUB_PORT_STATUS_PORT_LOW_SPEED) > 0, DEC); + USB_HOST_SERIAL.print("HIGH_SPEED:\t"); + USB_HOST_SERIAL.println((evt.bmStatus & bmHUB_PORT_STATUS_PORT_HIGH_SPEED) > 0, DEC); + USB_HOST_SERIAL.print("TEST:\t\t"); + USB_HOST_SERIAL.println((evt.bmStatus & bmHUB_PORT_STATUS_PORT_TEST) > 0, DEC); + USB_HOST_SERIAL.print("INDICATOR:\t"); + USB_HOST_SERIAL.println((evt.bmStatus & bmHUB_PORT_STATUS_PORT_INDICATOR) > 0, DEC); + + if(!print_changes) + return; + + USB_HOST_SERIAL.println("\r\nChange"); + USB_HOST_SERIAL.print("CONNECTION:\t"); + USB_HOST_SERIAL.println((evt.bmChange & bmHUB_PORT_STATUS_C_PORT_CONNECTION) > 0, DEC); + USB_HOST_SERIAL.print("ENABLE:\t\t"); + USB_HOST_SERIAL.println((evt.bmChange & bmHUB_PORT_STATUS_C_PORT_ENABLE) > 0, DEC); + USB_HOST_SERIAL.print("SUSPEND:\t"); + USB_HOST_SERIAL.println((evt.bmChange & bmHUB_PORT_STATUS_C_PORT_SUSPEND) > 0, DEC); + USB_HOST_SERIAL.print("OVER_CURRENT:\t"); + USB_HOST_SERIAL.println((evt.bmChange & bmHUB_PORT_STATUS_C_PORT_OVER_CURRENT) > 0, DEC); + USB_HOST_SERIAL.print("RESET:\t\t"); + USB_HOST_SERIAL.println((evt.bmChange & bmHUB_PORT_STATUS_C_PORT_RESET) > 0, DEC); +} |