summaryrefslogtreecommitdiff
path: root/protocol/serial_soft.c
diff options
context:
space:
mode:
Diffstat (limited to 'protocol/serial_soft.c')
-rw-r--r--protocol/serial_soft.c240
1 files changed, 0 insertions, 240 deletions
diff --git a/protocol/serial_soft.c b/protocol/serial_soft.c
deleted file mode 100644
index 44822b7e43..0000000000
--- a/protocol/serial_soft.c
+++ /dev/null
@@ -1,240 +0,0 @@
-/*
-Copyright 2012 Jun WAKO <wakojun@gmail.com>
-
-This software is licensed with a Modified BSD License.
-All of this is supposed to be Free Software, Open Source, DFSG-free,
-GPL-compatible, and OK to use in both free and proprietary applications.
-Additions and corrections to this file are welcome.
-
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
-* Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
-
-* Neither the name of the copyright holders nor the names of
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
-*/
-
-#include <stdbool.h>
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include "serial.h"
-
-/*
- * Stupid Inefficient Busy-wait Software Serial
- * which is still useful for negative logic signal like Sun protocol
- * if it is not supported by hardware UART.
- *
- * TODO: delay is not accurate enough. Instruction cycle should be counted and inline assemby is needed.
- */
-
-#define WAIT_US (1000000L/SERIAL_SOFT_BAUD)
-
-#ifdef SERIAL_SOFT_LOGIC_NEGATIVE
- #define SERIAL_SOFT_RXD_IN() !(SERIAL_SOFT_RXD_READ())
- #define SERIAL_SOFT_TXD_ON() SERIAL_SOFT_TXD_LO()
- #define SERIAL_SOFT_TXD_OFF() SERIAL_SOFT_TXD_HI()
-#else
- #define SERIAL_SOFT_RXD_IN() !!(SERIAL_SOFT_RXD_READ())
- #define SERIAL_SOFT_TXD_ON() SERIAL_SOFT_TXD_HI()
- #define SERIAL_SOFT_TXD_OFF() SERIAL_SOFT_TXD_LO()
-#endif
-
-#ifdef SERIAL_SOFT_PARITY_EVEN
- #define SERIAL_SOFT_PARITY_VAL 0
-#elif defined(SERIAL_SOFT_PARITY_ODD)
- #define SERIAL_SOFT_PARITY_VAL 1
-#endif
-
-/* debug for signal timing, see debug pin with oscilloscope */
-#define SERIAL_SOFT_DEBUG
-#ifdef SERIAL_SOFT_DEBUG
- #define SERIAL_SOFT_DEBUG_INIT() (DDRD |= 1<<7)
- #define SERIAL_SOFT_DEBUG_TGL() (PORTD ^= 1<<7)
-#else
- #define SERIAL_SOFT_DEBUG_INIT()
- #define SERIAL_SOFT_DEBUG_TGL()
-#endif
-
-
-void serial_init(void)
-{
- SERIAL_SOFT_DEBUG_INIT();
-
- SERIAL_SOFT_RXD_INIT();
- SERIAL_SOFT_TXD_INIT();
-}
-
-/* RX ring buffer */
-#define RBUF_SIZE 8
-static uint8_t rbuf[RBUF_SIZE];
-static uint8_t rbuf_head = 0;
-static uint8_t rbuf_tail = 0;
-
-
-uint8_t serial_recv(void)
-{
- uint8_t data = 0;
- if (rbuf_head == rbuf_tail) {
- return 0;
- }
-
- data = rbuf[rbuf_tail];
- rbuf_tail = (rbuf_tail + 1) % RBUF_SIZE;
- return data;
-}
-
-int16_t serial_recv2(void)
-{
- uint8_t data = 0;
- if (rbuf_head == rbuf_tail) {
- return -1;
- }
-
- data = rbuf[rbuf_tail];
- rbuf_tail = (rbuf_tail + 1) % RBUF_SIZE;
- return data;
-}
-
-void serial_send(uint8_t data)
-{
- /* signal state: IDLE: ON, START: OFF, STOP: ON, DATA0: OFF, DATA1: ON */
-
-#ifdef SERIAL_SOFT_BIT_ORDER_MSB
- #ifdef SERIAL_SOFT_DATA_7BIT
- uint8_t mask = 0x40;
- #else
- uint8_t mask = 0x80;
- #endif
-#else
- uint8_t mask = 0x01;
-#endif
-
- uint8_t parity = 0;
-
- /* start bit */
- SERIAL_SOFT_TXD_OFF();
- _delay_us(WAIT_US);
-
-#ifdef SERIAL_SOFT_DATA_7BIT
- while (mask&0x7F) {
-#else
- while (mask&0xFF) {
-#endif
- if (data&mask) {
- SERIAL_SOFT_TXD_ON();
- parity ^= 1;
- } else {
- SERIAL_SOFT_TXD_OFF();
- }
- _delay_us(WAIT_US);
-
-#ifdef SERIAL_SOFT_BIT_ORDER_MSB
- mask >>= 1;
-#else
- mask <<= 1;
-#endif
- }
-
-#if defined(SERIAL_SOFT_PARITY_EVEN) || defined(SERIAL_SOFT_PARITY_ODD)
- /* to center of parity bit */
- if (parity != SERIAL_SOFT_PARITY_VAL) {
- SERIAL_SOFT_TXD_ON();
- } else {
- SERIAL_SOFT_TXD_OFF();
- }
- _delay_us(WAIT_US);
-#endif
-
- /* stop bit */
- SERIAL_SOFT_TXD_ON();
- _delay_us(WAIT_US);
-}
-
-/* detect edge of start bit */
-ISR(SERIAL_SOFT_RXD_VECT)
-{
- SERIAL_SOFT_DEBUG_TGL();
- SERIAL_SOFT_RXD_INT_ENTER()
-
- uint8_t data = 0;
-
-#ifdef SERIAL_SOFT_BIT_ORDER_MSB
- #ifdef SERIAL_SOFT_DATA_7BIT
- uint8_t mask = 0x40;
- #else
- uint8_t mask = 0x80;
- #endif
-#else
- uint8_t mask = 0x01;
-#endif
-
- uint8_t parity = 0;
-
- /* to center of start bit */
- _delay_us(WAIT_US/2);
- SERIAL_SOFT_DEBUG_TGL();
- do {
- /* to center of next bit */
- _delay_us(WAIT_US);
-
- SERIAL_SOFT_DEBUG_TGL();
- if (SERIAL_SOFT_RXD_IN()) {
- data |= mask;
- parity ^= 1;
- }
-#ifdef SERIAL_SOFT_BIT_ORDER_MSB
- mask >>= 1;
-#else
- mask <<= 1;
-#endif
-#ifdef SERIAL_SOFT_DATA_7BIT
- } while (mask&0x7F);
-#else
- } while (mask&0xFF);
-#endif
-
-#if defined(SERIAL_SOFT_PARITY_EVEN) || defined(SERIAL_SOFT_PARITY_ODD)
- /* to center of parity bit */
- _delay_us(WAIT_US);
- if (SERIAL_SOFT_RXD_IN()) { parity ^= 1; }
- SERIAL_SOFT_DEBUG_TGL();
-#endif
-
- /* to center of stop bit */
- _delay_us(WAIT_US);
-
- uint8_t next = (rbuf_head + 1) % RBUF_SIZE;
-#if defined(SERIAL_SOFT_PARITY_EVEN) || defined(SERIAL_SOFT_PARITY_ODD)
- if ((parity == SERIAL_SOFT_PARITY_VAL) && next != rbuf_tail) {
-#else
- if (next != rbuf_tail) {
-#endif
- rbuf[rbuf_head] = data;
- rbuf_head = next;
- }
-
- SERIAL_SOFT_RXD_INT_EXIT();
- SERIAL_SOFT_DEBUG_TGL();
-}
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 02:33:57 +0000