summaryrefslogtreecommitdiff
path: root/protocol/lufa/lufa.c
diff options
context:
space:
mode:
Diffstat (limited to 'protocol/lufa/lufa.c')
-rw-r--r--protocol/lufa/lufa.c94
1 files changed, 53 insertions, 41 deletions
diff --git a/protocol/lufa/lufa.c b/protocol/lufa/lufa.c
index eca51c8784..d60aecc3f1 100644
--- a/protocol/lufa/lufa.c
+++ b/protocol/lufa/lufa.c
@@ -52,8 +52,8 @@
#include "descriptor.h"
#include "lufa.h"
-static uint8_t idle_duration = 0;
-static uint8_t protocol_report = 1;
+uint8_t keyboard_idle = 0;
+uint8_t keyboard_protocol = 1;
static uint8_t keyboard_led_stats = 0;
static report_keyboard_t keyboard_report_sent;
@@ -184,15 +184,6 @@ void EVENT_USB_Device_StartOfFrame(void)
/** Event handler for the USB_ConfigurationChanged event.
* This is fired when the host sets the current configuration of the USB device after enumeration.
*/
-#if LUFA_VERSION_INTEGER < 0x120730
- /* old API 120219 */
- #define ENDPOINT_CONFIG(epnum, eptype, epdir, epsize, epbank) Endpoint_ConfigureEndpoint(epnum, eptype, epdir, epsize, epbank)
-#else
- /* new API >= 120730 */
- #define ENDPOINT_BANK_SINGLE 1
- #define ENDPOINT_BANK_DOUBLE 2
- #define ENDPOINT_CONFIG(epnum, eptype, epdir, epsize, epbank) Endpoint_ConfigureEndpoint((epdir) | (epnum) , eptype, epsize, epbank)
-#endif
void EVENT_USB_Device_ConfigurationChanged(void)
{
bool ConfigSuccess = true;
@@ -217,9 +208,11 @@ void EVENT_USB_Device_ConfigurationChanged(void)
/* Setup Console HID Report Endpoints */
ConfigSuccess &= ENDPOINT_CONFIG(CONSOLE_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN,
CONSOLE_EPSIZE, ENDPOINT_BANK_DOUBLE);
+#if 0
ConfigSuccess &= ENDPOINT_CONFIG(CONSOLE_OUT_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_OUT,
CONSOLE_EPSIZE, ENDPOINT_BANK_SINGLE);
#endif
+#endif
#ifdef NKRO_ENABLE
/* Setup NKRO HID Report Endpoints */
@@ -279,6 +272,7 @@ void EVENT_USB_Device_ControlRequest(void)
// Interface
switch (USB_ControlRequest.wIndex) {
case KEYBOARD_INTERFACE:
+ case NKRO_INTERFACE:
Endpoint_ClearSETUP();
while (!(Endpoint_IsOUTReceived())) {
@@ -299,21 +293,29 @@ void EVENT_USB_Device_ControlRequest(void)
case HID_REQ_GetProtocol:
if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
{
- Endpoint_ClearSETUP();
- while (!(Endpoint_IsINReady()));
- Endpoint_Write_8(protocol_report);
- Endpoint_ClearIN();
- Endpoint_ClearStatusStage();
+ if (USB_ControlRequest.wIndex == KEYBOARD_INTERFACE) {
+ Endpoint_ClearSETUP();
+ while (!(Endpoint_IsINReady()));
+ Endpoint_Write_8(keyboard_protocol);
+ Endpoint_ClearIN();
+ Endpoint_ClearStatusStage();
+ }
}
break;
case HID_REQ_SetProtocol:
if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
{
- Endpoint_ClearSETUP();
- Endpoint_ClearStatusStage();
+ if (USB_ControlRequest.wIndex == KEYBOARD_INTERFACE) {
+ Endpoint_ClearSETUP();
+ Endpoint_ClearStatusStage();
- protocol_report = ((USB_ControlRequest.wValue & 0xFF) != 0x00);
+ keyboard_protocol = ((USB_ControlRequest.wValue & 0xFF) != 0x00);
+#ifdef NKRO_ENABLE
+ keyboard_nkro = !!keyboard_protocol;
+#endif
+ clear_keyboard();
+ }
}
break;
@@ -323,7 +325,7 @@ void EVENT_USB_Device_ControlRequest(void)
Endpoint_ClearSETUP();
Endpoint_ClearStatusStage();
- idle_duration = ((USB_ControlRequest.wValue & 0xFF00) >> 8);
+ keyboard_idle = ((USB_ControlRequest.wValue & 0xFF00) >> 8);
}
break;
@@ -332,7 +334,7 @@ void EVENT_USB_Device_ControlRequest(void)
{
Endpoint_ClearSETUP();
while (!(Endpoint_IsINReady()));
- Endpoint_Write_8(idle_duration);
+ Endpoint_Write_8(keyboard_idle);
Endpoint_ClearIN();
Endpoint_ClearStatusStage();
}
@@ -351,7 +353,7 @@ static uint8_t keyboard_leds(void)
static void send_keyboard(report_keyboard_t *report)
{
- uint8_t timeout = 0;
+ uint8_t timeout = 255;
if (USB_DeviceState != DEVICE_STATE_Configured)
return;
@@ -359,26 +361,27 @@ static void send_keyboard(report_keyboard_t *report)
/* Select the Keyboard Report Endpoint */
#ifdef NKRO_ENABLE
if (keyboard_nkro) {
+ /* Report protocol - NKRO */
Endpoint_SelectEndpoint(NKRO_IN_EPNUM);
- }
- else
-#endif
- {
- Endpoint_SelectEndpoint(KEYBOARD_IN_EPNUM);
- }
- /* Check if Keyboard Endpoint Ready for Read/Write */
- while (--timeout && !Endpoint_IsReadWriteAllowed()) ;
+ /* Check if write ready for a polling interval around 1ms */
+ while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(4);
+ if (!Endpoint_IsReadWriteAllowed()) return;
- /* Write Keyboard Report Data */
-#ifdef NKRO_ENABLE
- if (keyboard_nkro) {
+ /* Write Keyboard Report Data */
Endpoint_Write_Stream_LE(report, NKRO_EPSIZE, NULL);
}
else
#endif
{
- /* boot mode */
+ /* Boot protocol */
+ Endpoint_SelectEndpoint(KEYBOARD_IN_EPNUM);
+
+ /* Check if write ready for a polling interval around 10ms */
+ while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40);
+ if (!Endpoint_IsReadWriteAllowed()) return;
+
+ /* Write Keyboard Report Data */
Endpoint_Write_Stream_LE(report, KEYBOARD_EPSIZE, NULL);
}
@@ -391,7 +394,7 @@ static void send_keyboard(report_keyboard_t *report)
static void send_mouse(report_mouse_t *report)
{
#ifdef MOUSE_ENABLE
- uint8_t timeout = 0;
+ uint8_t timeout = 255;
if (USB_DeviceState != DEVICE_STATE_Configured)
return;
@@ -399,8 +402,9 @@ static void send_mouse(report_mouse_t *report)
/* Select the Mouse Report Endpoint */
Endpoint_SelectEndpoint(MOUSE_IN_EPNUM);
- /* Check if Mouse Endpoint Ready for Read/Write */
- while (--timeout && !Endpoint_IsReadWriteAllowed()) ;
+ /* Check if write ready for a polling interval around 10ms */
+ while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40);
+ if (!Endpoint_IsReadWriteAllowed()) return;
/* Write Mouse Report Data */
Endpoint_Write_Stream_LE(report, sizeof(report_mouse_t), NULL);
@@ -412,7 +416,7 @@ static void send_mouse(report_mouse_t *report)
static void send_system(uint16_t data)
{
- uint8_t timeout = 0;
+ uint8_t timeout = 255;
if (USB_DeviceState != DEVICE_STATE_Configured)
return;
@@ -422,14 +426,18 @@ static void send_system(uint16_t data)
.usage = data
};
Endpoint_SelectEndpoint(EXTRAKEY_IN_EPNUM);
- while (--timeout && !Endpoint_IsReadWriteAllowed()) ;
+
+ /* Check if write ready for a polling interval around 10ms */
+ while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40);
+ if (!Endpoint_IsReadWriteAllowed()) return;
+
Endpoint_Write_Stream_LE(&r, sizeof(report_extra_t), NULL);
Endpoint_ClearIN();
}
static void send_consumer(uint16_t data)
{
- uint8_t timeout = 0;
+ uint8_t timeout = 255;
if (USB_DeviceState != DEVICE_STATE_Configured)
return;
@@ -439,7 +447,11 @@ static void send_consumer(uint16_t data)
.usage = data
};
Endpoint_SelectEndpoint(EXTRAKEY_IN_EPNUM);
- while (--timeout && !Endpoint_IsReadWriteAllowed()) ;
+
+ /* Check if write ready for a polling interval around 10ms */
+ while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40);
+ if (!Endpoint_IsReadWriteAllowed()) return;
+
Endpoint_Write_Stream_LE(&r, sizeof(report_extra_t), NULL);
Endpoint_ClearIN();
}
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-31 07:41:50 +0000