diff options
Diffstat (limited to 'protocol/lufa/lufa.c')
| -rw-r--r-- | protocol/lufa/lufa.c | 605 |
1 files changed, 605 insertions, 0 deletions
diff --git a/protocol/lufa/lufa.c b/protocol/lufa/lufa.c new file mode 100644 index 0000000000..cdfc7bc6ad --- /dev/null +++ b/protocol/lufa/lufa.c @@ -0,0 +1,605 @@ +/* + * Copyright 2012 Jun Wako <wakojun@gmail.com> + * This file is based on: + * LUFA-120219/Demos/Device/Lowlevel/KeyboardMouse + * LUFA-120219/Demos/Device/Lowlevel/GenericHID + */ + +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#include "report.h" +#include "host.h" +#include "host_driver.h" +#include "keyboard.h" +#include "action.h" +#include "led.h" +#include "sendchar.h" +#include "debug.h" +#ifdef SLEEP_LED_ENABLE +#include "sleep_led.h" +#endif +#include "suspend.h" + +#include "descriptor.h" +#include "lufa.h" + +uint8_t keyboard_idle = 0; +uint8_t keyboard_protocol = 1; +static uint8_t keyboard_led_stats = 0; + +static report_keyboard_t keyboard_report_sent; + + +/* Host driver */ +static uint8_t keyboard_leds(void); +static void send_keyboard(report_keyboard_t *report); +static void send_mouse(report_mouse_t *report); +static void send_system(uint16_t data); +static void send_consumer(uint16_t data); +host_driver_t lufa_driver = { + keyboard_leds, + send_keyboard, + send_mouse, + send_system, + send_consumer +}; + + +/******************************************************************************* + * Console + ******************************************************************************/ +#ifdef CONSOLE_ENABLE +static void Console_Task(void) +{ + /* Device must be connected and configured for the task to run */ + if (USB_DeviceState != DEVICE_STATE_Configured) + return; + + uint8_t ep = Endpoint_GetCurrentEndpoint(); + +#if 0 + // TODO: impl receivechar()/recvchar() + Endpoint_SelectEndpoint(CONSOLE_OUT_EPNUM); + + /* Check to see if a packet has been sent from the host */ + if (Endpoint_IsOUTReceived()) + { + /* Check to see if the packet contains data */ + if (Endpoint_IsReadWriteAllowed()) + { + /* Create a temporary buffer to hold the read in report from the host */ + uint8_t ConsoleData[CONSOLE_EPSIZE]; + + /* Read Console Report Data */ + Endpoint_Read_Stream_LE(&ConsoleData, sizeof(ConsoleData), NULL); + + /* Process Console Report Data */ + //ProcessConsoleHIDReport(ConsoleData); + } + + /* Finalize the stream transfer to send the last packet */ + Endpoint_ClearOUT(); + } +#endif + + /* IN packet */ + Endpoint_SelectEndpoint(CONSOLE_IN_EPNUM); + if (!Endpoint_IsEnabled() || !Endpoint_IsConfigured()) { + Endpoint_SelectEndpoint(ep); + return; + } + + // fill empty bank + while (Endpoint_IsReadWriteAllowed()) + Endpoint_Write_8(0); + + // flash senchar packet + if (Endpoint_IsINReady()) { + Endpoint_ClearIN(); + } + + Endpoint_SelectEndpoint(ep); +} +#else +static void Console_Task(void) +{ +} +#endif + + +/******************************************************************************* + * USB Events + ******************************************************************************/ +/* + * Event Order of Plug in: + * 0) EVENT_USB_Device_Connect + * 1) EVENT_USB_Device_Suspend + * 2) EVENT_USB_Device_Reset + * 3) EVENT_USB_Device_Wake +*/ +void EVENT_USB_Device_Connect(void) +{ + print("[C]"); + /* For battery powered device */ + if (!USB_IsInitialized) { + USB_Disable(); + USB_Init(); + USB_Device_EnableSOFEvents(); + } +} + +void EVENT_USB_Device_Disconnect(void) +{ + print("[D]"); + /* For battery powered device */ + USB_IsInitialized = false; +/* TODO: This doesn't work. After several plug in/outs can not be enumerated. + if (USB_IsInitialized) { + USB_Disable(); // Disable all interrupts + USB_Controller_Enable(); + USB_INT_Enable(USB_INT_VBUSTI); + } +*/ +} + +void EVENT_USB_Device_Reset(void) +{ + print("[R]"); +} + +void EVENT_USB_Device_Suspend() +{ + print("[S]"); + matrix_power_down(); +#ifdef SLEEP_LED_ENABLE + sleep_led_enable(); +#endif +} + +void EVENT_USB_Device_WakeUp() +{ + print("[W]"); + suspend_wakeup_init(); + +#ifdef SLEEP_LED_ENABLE + sleep_led_disable(); + // NOTE: converters may not accept this + led_set(host_keyboard_leds()); +#endif +} + +void EVENT_USB_Device_StartOfFrame(void) +{ + Console_Task(); +} + +/** Event handler for the USB_ConfigurationChanged event. + * This is fired when the host sets the current configuration of the USB device after enumeration. + */ +void EVENT_USB_Device_ConfigurationChanged(void) +{ + bool ConfigSuccess = true; + + /* Setup Keyboard HID Report Endpoints */ + ConfigSuccess &= ENDPOINT_CONFIG(KEYBOARD_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, + KEYBOARD_EPSIZE, ENDPOINT_BANK_SINGLE); + +#ifdef MOUSE_ENABLE + /* Setup Mouse HID Report Endpoint */ + ConfigSuccess &= ENDPOINT_CONFIG(MOUSE_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, + MOUSE_EPSIZE, ENDPOINT_BANK_SINGLE); +#endif + +#ifdef EXTRAKEY_ENABLE + /* Setup Extra HID Report Endpoint */ + ConfigSuccess &= ENDPOINT_CONFIG(EXTRAKEY_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, + EXTRAKEY_EPSIZE, ENDPOINT_BANK_SINGLE); +#endif + +#ifdef CONSOLE_ENABLE + /* Setup Console HID Report Endpoints */ + ConfigSuccess &= ENDPOINT_CONFIG(CONSOLE_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, + CONSOLE_EPSIZE, ENDPOINT_BANK_DOUBLE); +#if 0 + ConfigSuccess &= ENDPOINT_CONFIG(CONSOLE_OUT_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_OUT, + CONSOLE_EPSIZE, ENDPOINT_BANK_SINGLE); +#endif +#endif + +#ifdef NKRO_ENABLE + /* Setup NKRO HID Report Endpoints */ + ConfigSuccess &= ENDPOINT_CONFIG(NKRO_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, + NKRO_EPSIZE, ENDPOINT_BANK_SINGLE); +#endif +} + +/* +Appendix G: HID Request Support Requirements + +The following table enumerates the requests that need to be supported by various types of HID class devices. + +Device type GetReport SetReport GetIdle SetIdle GetProtocol SetProtocol +------------------------------------------------------------------------------------------ +Boot Mouse Required Optional Optional Optional Required Required +Non-Boot Mouse Required Optional Optional Optional Optional Optional +Boot Keyboard Required Optional Required Required Required Required +Non-Boot Keybrd Required Optional Required Required Optional Optional +Other Device Required Optional Optional Optional Optional Optional +*/ +/** Event handler for the USB_ControlRequest event. + * This is fired before passing along unhandled control requests to the library for processing internally. + */ +void EVENT_USB_Device_ControlRequest(void) +{ + uint8_t* ReportData = NULL; + uint8_t ReportSize = 0; + + /* Handle HID Class specific requests */ + switch (USB_ControlRequest.bRequest) + { + case HID_REQ_GetReport: + if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)) + { + Endpoint_ClearSETUP(); + + // Interface + switch (USB_ControlRequest.wIndex) { + case KEYBOARD_INTERFACE: + // TODO: test/check + ReportData = (uint8_t*)&keyboard_report_sent; + ReportSize = sizeof(keyboard_report_sent); + break; + } + + /* Write the report data to the control endpoint */ + Endpoint_Write_Control_Stream_LE(ReportData, ReportSize); + Endpoint_ClearOUT(); + } + + break; + case HID_REQ_SetReport: + if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) + { + + // Interface + switch (USB_ControlRequest.wIndex) { + case KEYBOARD_INTERFACE: +#ifdef NKRO_ENABLE + case NKRO_INTERFACE: +#endif + Endpoint_ClearSETUP(); + + while (!(Endpoint_IsOUTReceived())) { + if (USB_DeviceState == DEVICE_STATE_Unattached) + return; + } + keyboard_led_stats = Endpoint_Read_8(); + + Endpoint_ClearOUT(); + Endpoint_ClearStatusStage(); + break; + } + + } + + break; + + case HID_REQ_GetProtocol: + if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)) + { + if (USB_ControlRequest.wIndex == KEYBOARD_INTERFACE) { + Endpoint_ClearSETUP(); + while (!(Endpoint_IsINReady())); + Endpoint_Write_8(keyboard_protocol); + Endpoint_ClearIN(); + Endpoint_ClearStatusStage(); + } + } + + break; + case HID_REQ_SetProtocol: + if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) + { + if (USB_ControlRequest.wIndex == KEYBOARD_INTERFACE) { + Endpoint_ClearSETUP(); + Endpoint_ClearStatusStage(); + + keyboard_protocol = ((USB_ControlRequest.wValue & 0xFF) != 0x00); +#ifdef NKRO_ENABLE + keyboard_nkro = !!keyboard_protocol; +#endif + clear_keyboard(); + } + } + + break; + case HID_REQ_SetIdle: + if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) + { + Endpoint_ClearSETUP(); + Endpoint_ClearStatusStage(); + + keyboard_idle = ((USB_ControlRequest.wValue & 0xFF00) >> 8); + } + + break; + case HID_REQ_GetIdle: + if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)) + { + Endpoint_ClearSETUP(); + while (!(Endpoint_IsINReady())); + Endpoint_Write_8(keyboard_idle); + Endpoint_ClearIN(); + Endpoint_ClearStatusStage(); + } + + break; + } +} + +/******************************************************************************* + * Host driver + ******************************************************************************/ +static uint8_t keyboard_leds(void) +{ + return keyboard_led_stats; +} + +static void send_keyboard(report_keyboard_t *report) +{ + uint8_t timeout = 255; + + if (USB_DeviceState != DEVICE_STATE_Configured) + return; + + /* Select the Keyboard Report Endpoint */ +#ifdef NKRO_ENABLE + if (keyboard_nkro) { + /* Report protocol - NKRO */ + Endpoint_SelectEndpoint(NKRO_IN_EPNUM); + + /* Check if write ready for a polling interval around 1ms */ + while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(4); + if (!Endpoint_IsReadWriteAllowed()) return; + + /* Write Keyboard Report Data */ + Endpoint_Write_Stream_LE(report, NKRO_EPSIZE, NULL); + } + else +#endif + { + /* Boot protocol */ + Endpoint_SelectEndpoint(KEYBOARD_IN_EPNUM); + + /* Check if write ready for a polling interval around 10ms */ + while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40); + if (!Endpoint_IsReadWriteAllowed()) return; + + /* Write Keyboard Report Data */ + Endpoint_Write_Stream_LE(report, KEYBOARD_EPSIZE, NULL); + } + + /* Finalize the stream transfer to send the last packet */ + Endpoint_ClearIN(); + + keyboard_report_sent = *report; +} + +static void send_mouse(report_mouse_t *report) +{ +#ifdef MOUSE_ENABLE + uint8_t timeout = 255; + + if (USB_DeviceState != DEVICE_STATE_Configured) + return; + + /* Select the Mouse Report Endpoint */ + Endpoint_SelectEndpoint(MOUSE_IN_EPNUM); + + /* Check if write ready for a polling interval around 10ms */ + while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40); + if (!Endpoint_IsReadWriteAllowed()) return; + + /* Write Mouse Report Data */ + Endpoint_Write_Stream_LE(report, sizeof(report_mouse_t), NULL); + + /* Finalize the stream transfer to send the last packet */ + Endpoint_ClearIN(); +#endif +} + +static void send_system(uint16_t data) +{ + uint8_t timeout = 255; + + if (USB_DeviceState != DEVICE_STATE_Configured) + return; + + report_extra_t r = { + .report_id = REPORT_ID_SYSTEM, + .usage = data + }; + Endpoint_SelectEndpoint(EXTRAKEY_IN_EPNUM); + + /* Check if write ready for a polling interval around 10ms */ + while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40); + if (!Endpoint_IsReadWriteAllowed()) return; + + Endpoint_Write_Stream_LE(&r, sizeof(report_extra_t), NULL); + Endpoint_ClearIN(); +} + +static void send_consumer(uint16_t data) +{ + uint8_t timeout = 255; + + if (USB_DeviceState != DEVICE_STATE_Configured) + return; + + report_extra_t r = { + .report_id = REPORT_ID_CONSUMER, + .usage = data + }; + Endpoint_SelectEndpoint(EXTRAKEY_IN_EPNUM); + + /* Check if write ready for a polling interval around 10ms */ + while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40); + if (!Endpoint_IsReadWriteAllowed()) return; + + Endpoint_Write_Stream_LE(&r, sizeof(report_extra_t), NULL); + Endpoint_ClearIN(); +} + + +/******************************************************************************* + * sendchar + ******************************************************************************/ +#ifdef CONSOLE_ENABLE +#define SEND_TIMEOUT 5 +int8_t sendchar(uint8_t c) +{ + // Not wait once timeouted. + // Because sendchar() is called so many times, waiting each call causes big lag. + static bool timeouted = false; + + if (USB_DeviceState != DEVICE_STATE_Configured) + return -1; + + uint8_t ep = Endpoint_GetCurrentEndpoint(); + Endpoint_SelectEndpoint(CONSOLE_IN_EPNUM); + if (!Endpoint_IsEnabled() || !Endpoint_IsConfigured()) { + goto ERROR_EXIT; + } + + if (timeouted && !Endpoint_IsReadWriteAllowed()) { + goto ERROR_EXIT; + } + + timeouted = false; + + uint8_t timeout = SEND_TIMEOUT; + while (!Endpoint_IsReadWriteAllowed()) { + if (USB_DeviceState != DEVICE_STATE_Configured) { + goto ERROR_EXIT; + } + if (Endpoint_IsStalled()) { + goto ERROR_EXIT; + } + if (!(timeout--)) { + timeouted = true; + goto ERROR_EXIT; + } + _delay_ms(1); + } + + Endpoint_Write_8(c); + + // send when bank is full + if (!Endpoint_IsReadWriteAllowed()) + Endpoint_ClearIN(); + + Endpoint_SelectEndpoint(ep); + return 0; +ERROR_EXIT: + Endpoint_SelectEndpoint(ep); + return -1; +} +#else +int8_t sendchar(uint8_t c) +{ + return 0; +} +#endif + + +/******************************************************************************* + * main + ******************************************************************************/ +static void SetupHardware(void) +{ + /* Disable watchdog if enabled by bootloader/fuses */ + MCUSR &= ~(1 << WDRF); + wdt_disable(); + + /* Disable clock division */ + clock_prescale_set(clock_div_1); + + // Leonardo needs. Without this USB device is not recognized. + USB_Disable(); + + USB_Init(); + + // for Console_Task + USB_Device_EnableSOFEvents(); + print_set_sendchar(sendchar); +} + +int main(void) __attribute__ ((weak)); +int main(void) +{ + SetupHardware(); + sei(); + + /* wait for USB startup & debug output */ + while (USB_DeviceState != DEVICE_STATE_Configured) { +#if defined(INTERRUPT_CONTROL_ENDPOINT) + ; +#else + USB_USBTask(); +#endif + } + print("USB configured.\n"); + + /* init modules */ + keyboard_init(); + host_set_driver(&lufa_driver); +#ifdef SLEEP_LED_ENABLE + sleep_led_init(); +#endif + + print("Keyboard start.\n"); + while (1) { + while (USB_DeviceState == DEVICE_STATE_Suspended) { + print("[s]"); + suspend_power_down(); + if (USB_Device_RemoteWakeupEnabled && suspend_wakeup_condition()) { + USB_Device_SendRemoteWakeup(); + } + } + + keyboard_task(); + +#if !defined(INTERRUPT_CONTROL_ENDPOINT) + USB_USBTask(); +#endif + } +} |