diff options
Diffstat (limited to 'protocol/lufa/LUFA-git/LUFA/DoxygenPages/KnownIssues.txt')
| m--------- | protocol/lufa/LUFA-git | 0 | ||||
| -rw-r--r-- | protocol/lufa/LUFA-git/LUFA/DoxygenPages/KnownIssues.txt | 170 |
2 files changed, 170 insertions, 0 deletions
diff --git a/protocol/lufa/LUFA-git b/protocol/lufa/LUFA-git deleted file mode 160000 -Subproject b6c18b2a7c544653efbe12a1d4e8ba65e7d83c3 diff --git a/protocol/lufa/LUFA-git/LUFA/DoxygenPages/KnownIssues.txt b/protocol/lufa/LUFA-git/LUFA/DoxygenPages/KnownIssues.txt new file mode 100644 index 0000000000..7018fec4d1 --- /dev/null +++ b/protocol/lufa/LUFA-git/LUFA/DoxygenPages/KnownIssues.txt @@ -0,0 +1,170 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + + /** \page Page_KnownIssues Known Issues + * The following are known issues present in each official LUFA release. This list should contain all known + * issues in the library. Most of these issues should be corrected in the future release - see + * \ref Page_FutureChanges for a list of planned changes in future releases. + * + * \section Sec_KnownIssues140928 Version 140928 + * - AVR8 Architecture + * - No known issues. + * - UC3 Architecture + * \warning The UC3 device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. \n + * + * - No demos, bootloaders or projects have been ported for the UC3 devices in the current release, + * although the architecture is supported in the LUFA core library. + * - DMA transfers to and from the USB controller are not yet implemented for this release. + * - The UC3C, UC3D and UC3L sub-families of UC3 are not currently supported by the library due to their + * altered USB controller design. + * - The various \c *_CreateStream() functions for creating standard \c <stdio.h> compatible virtual file + * streams are not available on the UC3 architecture, due to a lack of suitable library support. + * - XMEGA Architecture + * \warning The XMEGA device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. + * + * - Endpoints of more than 64 bytes are not currently supported in this release. + * - Isochronous endpoints are not currently supported in this release. As a result, the audio class + * cannot be used on XMEGA devices. + * - Multiple-bank endpoints are not currently supported in this release. + * - Early silicon revisions of the ATXMEGA128A1U are incompatible with LUFA, due to their various errata + * relating to the USB controller. + * - Architecture Independent + * - The LUFA library is not watchdog aware, and thus timeouts are possible if short periods are used + * and a lengthy USB operation is initiated. + * - No LUFA provided driver INF files for Windows are signed, and thus may fail to install on systems where driver signing is enforced (e.g. Windows 8). + * - Build System + * - No known issues. + * - Atmel Studio Integration + * - Not all devices are listed in the "Supported Parts" screen when selecting a device. To select an alternative device, change the "Show Device" drop-down to "All Parts". + * - When switching boards after changing the device selection, a second conflicting \c BOARD symbol definition can be created that prevents successful compilation. To fix, open the project properties window (<i>Project->Project {name} Properties...</i> menu item), click the "Toolchain" tab, click "Symbols" under the "AVR/GNU C Compiler" section and remove the incorrect definition. + * + * \section Sec_KnownIssues140302 Version 140302 + * - AVR8 Architecture + * - No known issues. + * - UC3 Architecture + * \warning The UC3 device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. \n + * + * - No demos, bootloaders or projects have been ported for the UC3 devices in the current release, + * although the architecture is supported in the LUFA core library. + * - DMA transfers to and from the USB controller are not yet implemented for this release. + * - The UC3C, UC3D and UC3L sub-families of UC3 are not currently supported by the library due to their + * altered USB controller design. + * - The various \c *_CreateStream() functions for creating standard \c <stdio.h> compatible virtual file + * streams are not available on the UC3 architecture, due to a lack of suitable library support. + * - XMEGA Architecture + * \warning The XMEGA device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. + * + * - Endpoints of more than 64 bytes are not currently supported in this release. + * - Isochronous endpoints are not currently supported in this release. As a result, the audio class + * cannot be used on XMEGA devices. + * - Multiple-bank endpoints are not currently supported in this release. + * - Early silicon revisions of the ATXMEGA128A1U are incompatible with LUFA, due to their various errata + * relating to the USB controller. + * - Architecture Independent + * - The LUFA library is not watchdog aware, and thus timeouts are possible if short periods are used + * and a lengthy USB operation is initiated. + * - No LUFA provided driver INF files for Windows are signed, and thus may fail to install on systems where driver signing is enforced (e.g. Windows 8). + * - Build System + * - No known issues. + * - Atmel Studio Integration + * - Not all devices are listed in the "Supported Parts" screen when selecting a device. To select an alternative device, change the "Show Device" drop-down to "All Parts". + * - When switching boards after changing the device selection, a second conflicting BOARD symbol definition can be created that prevents successful compilation. To fix, open the project properties window (<i>Project->Project {name} Properties...</i> menu item), click the Toolchain tab, click "Symbols" under the "AVR/GNU C Compiler" section and remove the incorrect definition. + * + * \section Sec_KnownIssues130901 Version 130901 + * - AVR8 Architecture + * - No known issues. + * - UC3 Architecture + * \warning The UC3 device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. \n + * + * - No demos, bootloaders or projects have been ported for the UC3 devices in the current release, + * although the architecture is supported in the LUFA core library. + * - DMA transfers to and from the USB controller are not yet implemented for this release. + * - The UC3C, UC3D and UC3L sub-families of UC3 are not currently supported by the library due to their + * altered USB controller design. + * - The various \c *_CreateStream() functions for creating standard \c <stdio.h> compatible virtual file + * streams are not available on the UC3 architecture, due to a lack of suitable library support. + * - XMEGA Architecture + * \warning The XMEGA device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. + * + * - Endpoints of more than 64 bytes are not currently supported in this release. + * - Isochronous endpoints are not currently supported in this release. As a result, the audio class + * cannot be used on XMEGA devices. + * - Multiple-bank endpoints are not currently supported in this release. + * - Early silicon revisions of the ATXMEGA128A1U are incompatible with LUFA, due to their various errata + * relating to the USB controller. + * - Architecture Independent + * - The LUFA library is not watchdog aware, and thus timeouts are possible if short periods are used + * and a lengthy USB operation is initiated. + * - No LUFA provided driver INF files for Windows are signed, and thus may fail to install on systems where driver signing is enforced (e.g. Windows 8). + * - Build System + * - No known issues. + * - Atmel Studio Integration + * - Not all devices are listed in the "Supported Parts" screen when selecting a device. To select an alternative device, change the "Show Device" drop-down to "All Parts". + * - When switching boards after changing the device selection, a second conflicting BOARD symbol definition can be created that prevents successful compilation. To fix, open the project properties window (<i>Project->Project {name} Properties...</i> menu item), click the Toolchain tab, click "Symbols" under the "AVR/GNU C Compiler" section and remove the incorrect definition. + * + * \section Sec_KnownIssues130303 Version 130303 + * - AVR8 Architecture + * - No known issues. + * - UC3 Architecture + * \warning The UC3 device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. \n + * + * - No demos, bootloaders or projects have been ported for the UC3 devices in the current release, + * although the architecture is supported in the LUFA core library. + * - DMA transfers to and from the USB controller are not yet implemented for this release. + * - The UC3C, UC3D and UC3L sub-families of UC3 are not currently supported by the library due to their + * altered USB controller design. + * - The various \c CreateStream() functions for creating standard \c <stdio.h> compatible virtual file + * streams are not available on the UC3 architecture, due to a lack of suitable library support. + * - XMEGA Architecture + * \warning The XMEGA device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. + * + * - No demos, bootloaders or projects have been ported for the XMEGA devices in the current release, + * although the architecture is supported in the LUFA core library. + * - Endpoints of more than 64 bytes are not currently supported in this release. + * - Isochronous endpoints are not currently supported in this release. As a result, the audio class + * cannot be used on XMEGA devices. + * - Multiple-bank endpoints are not currently supported in this release. + * - Early revisions of the ATXMEGA128A1U are incompatible with LUFA, due to their various errata + * relating to the USB controller. + * - Architecture Independent + * - The LUFA library is not watchdog aware, and thus timeouts are possible if short periods are used + * and a lengthy USB operation is initiated. + * - No LUFA provided driver INF files for Windows are signed, and thus may fail to install on systems where driver signing is enforced (e.g. Windows 8). + * - Build System + * - No known issues. + * + * \section Sec_KnownIssues120730 Version 120730 + * - AVR8 Architecture + * - No known issues. + * - UC3 Architecture + * \warning The UC3 device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. \n + * + * - No demos, bootloaders or projects have been ported for the UC3 devices in the current release, + * although the architecture is supported in the LUFA core library. + * - DMA transfers to and from the USB controller are not yet implemented for this release. + * - The UC3C, UC3D and UC3L sub-families of UC3 are not currently supported by the library due to their + * altered USB controller design. + * - The various \c CreateStream() functions for creating standard \c <stdio.h> compatible virtual file + * streams are not available on the UC3 architecture, due to a lack of suitable library support. + * - XMEGA Architecture + * \warning The XMEGA device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. + * + * - No demos, bootloaders or projects have been ported for the XMEGA devices in the current release, + * although the architecture is supported in the LUFA core library. + * - Endpoints of more than 64 bytes are not currently supported in this release. + * - Isochronous endpoints are not currently supported in this release. As a result, the audio class + * cannot be used on XMEGA devices. + * - Multiple-bank endpoints are not currently supported in this release. + * - Early revisions of the ATXMEGA128A1U are incompatible with LUFA, due to their various errata + * relating to the USB controller. + * - Architecture Independent + * - The LUFA library is not watchdog aware, and thus timeouts are possible if short periods are used + * and a lengthy USB operation is initiated. + * - No LUFA provided driver INF files for Windows are signed, and thus may fail to install on systems where driver signing is enforced (e.g. Windows 8). + * - Build System + * - No known issues. + */ + |