diff options
Diffstat (limited to 'protocol/lufa/LUFA-git/LUFA/Common')
| m--------- | protocol/lufa/LUFA-git | 0 | ||||
| -rw-r--r-- | protocol/lufa/LUFA-git/LUFA/Common/ArchitectureSpecific.h | 185 | ||||
| -rw-r--r-- | protocol/lufa/LUFA-git/LUFA/Common/Architectures.h | 84 | ||||
| -rw-r--r-- | protocol/lufa/LUFA-git/LUFA/Common/Attributes.h | 150 | ||||
| -rw-r--r-- | protocol/lufa/LUFA-git/LUFA/Common/BoardTypes.h | 254 | ||||
| -rw-r--r-- | protocol/lufa/LUFA-git/LUFA/Common/Common.h | 393 | ||||
| -rw-r--r-- | protocol/lufa/LUFA-git/LUFA/Common/CompilerSpecific.h | 97 | ||||
| -rw-r--r-- | protocol/lufa/LUFA-git/LUFA/Common/Endianness.h | 493 |
8 files changed, 1656 insertions, 0 deletions
diff --git a/protocol/lufa/LUFA-git b/protocol/lufa/LUFA-git deleted file mode 160000 -Subproject b6c18b2a7c544653efbe12a1d4e8ba65e7d83c3 diff --git a/protocol/lufa/LUFA-git/LUFA/Common/ArchitectureSpecific.h b/protocol/lufa/LUFA-git/LUFA/Common/ArchitectureSpecific.h new file mode 100644 index 0000000000..292e27b37f --- /dev/null +++ b/protocol/lufa/LUFA-git/LUFA/Common/ArchitectureSpecific.h @@ -0,0 +1,185 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2014. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Architecture specific definitions relating to specific processor architectures. + * + * \copydetails Group_ArchitectureSpecific + * + * \note Do not include this file directly, rather include the Common.h header file instead to gain this file's + * functionality. + */ + +/** \ingroup Group_Common + * \defgroup Group_ArchitectureSpecific Architecture Specific Definitions + * \brief Architecture specific definitions relating to specific processor architectures. + * + * Architecture specific macros, functions and other definitions, which relate to specific architectures. This + * definitions may or may not be available in some form on other architectures, and thus should be protected by + * preprocessor checks in portable code to prevent compile errors. + * + * @{ + */ + +#ifndef __LUFA_ARCHSPEC_H__ +#define __LUFA_ARCHSPEC_H__ + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_COMMON_H) + #error Do not include this file directly. Include LUFA/Common/Common.h instead to gain this functionality. + #endif + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + #if (ARCH == ARCH_AVR8) || (ARCH == ARCH_XMEGA) || defined(__DOXYGEN__) + #if (ARCH == ARCH_AVR8) || defined(__DOXYGEN__) + /** Re-enables the AVR's JTAG bus in software, until a system reset. This will re-enable JTAG debugging + * interface after is has been disabled in software via \ref JTAG_DISABLE(). + * + * \note This macro is not available for all architectures. + */ + #define JTAG_ENABLE() do { \ + __asm__ __volatile__ ( \ + "in __tmp_reg__,__SREG__" "\n\t" \ + "cli" "\n\t" \ + "out %1, %0" "\n\t" \ + "out __SREG__, __tmp_reg__" "\n\t" \ + "out %1, %0" "\n\t" \ + : \ + : "r" (MCUCR & ~(1 << JTD)), \ + "M" (_SFR_IO_ADDR(MCUCR)) \ + : "r0"); \ + } while (0) + + /** Disables the AVR's JTAG bus in software, until a system reset. This will override the current JTAG + * status as set by the JTAGEN fuse, disabling JTAG debugging and reverting the JTAG pins back to GPIO + * mode. + * + * \note This macro is not available for all architectures. + */ + #define JTAG_DISABLE() do { \ + __asm__ __volatile__ ( \ + "in __tmp_reg__,__SREG__" "\n\t" \ + "cli" "\n\t" \ + "out %1, %0" "\n\t" \ + "out __SREG__, __tmp_reg__" "\n\t" \ + "out %1, %0" "\n\t" \ + : \ + : "r" (MCUCR | (1 << JTD)), \ + "M" (_SFR_IO_ADDR(MCUCR)) \ + : "r0"); \ + } while (0) + #endif + + /** Defines a volatile \c NOP statement which cannot be optimized out by the compiler, and thus can always + * be set as a breakpoint in the resulting code. Useful for debugging purposes, where the optimizer + * removes/reorders code to the point where break points cannot reliably be set. + * + * \note This macro is not available for all architectures. + */ + #define JTAG_DEBUG_POINT() __asm__ __volatile__ ("nop" ::) + + /** Defines an explicit JTAG break point in the resulting binary via the assembly \c BREAK statement. When + * a JTAG is used, this causes the program execution to halt when reached until manually resumed. + * + * \note This macro is not available for all architectures. + */ + #define JTAG_DEBUG_BREAK() __asm__ __volatile__ ("break" ::) + + /** Macro for testing condition "x" and breaking via \ref JTAG_DEBUG_BREAK() if the condition is false. + * + * \note This macro is not available for all architectures. + * + * \param[in] Condition Condition that will be evaluated. + */ + #define JTAG_ASSERT(Condition) do { \ + if (!(Condition)) \ + JTAG_DEBUG_BREAK(); \ + } while (0) + + /** Macro for testing condition \c "x" and writing debug data to the stdout stream if \c false. The stdout stream + * must be pre-initialized before this macro is run and linked to an output device, such as the microcontroller's + * USART peripheral. + * + * The output takes the form "{FILENAME}: Function {FUNCTION NAME}, Line {LINE NUMBER}: Assertion {Condition} failed." + * + * \note This macro is not available for all architectures. + * + * \param[in] Condition Condition that will be evaluated, + */ + #define STDOUT_ASSERT(Condition) do { \ + if (!(Condition)) \ + printf_P(PSTR("%s: Function \"%s\", Line %d: " \ + "Assertion \"%s\" failed.\r\n"), \ + __FILE__, __func__, __LINE__, #Condition); \ + } while (0) + + #if !defined(pgm_read_ptr) || defined(__DOXYGEN__) + /** Reads a pointer out of PROGMEM space on the AVR8 architecture. This is a wrapper for the avr-libc + * \c pgm_read_word() macro with a \c void* cast, so that its value can be assigned directly to a + * pointer variable or used in pointer arithmetic without further casting in C. + * + * \note This macro is not available for all architectures. + * + * \param[in] Address Address of the pointer to read. + * + * \return Pointer retrieved from PROGMEM space. + */ + #define pgm_read_ptr(Address) (void*)pgm_read_word(Address) + #endif + #elif (ARCH == ARCH_UC3) + #define JTAG_DEBUG_POINT() __asm__ __volatile__ ("nop" ::) + #define JTAG_DEBUG_BREAK() __asm__ __volatile__ ("breakpoint" ::) + #define JTAG_ASSERT(Condition) do { \ + if (!(Condition)) \ + JTAG_DEBUG_BREAK(); \ + } while (0) + #define STDOUT_ASSERT(Condition) do { \ + if (!(Condition)) \ + printf("%s: Function \"%s\", Line %d: " \ + "Assertion \"%s\" failed.\r\n", \ + __FILE__, __func__, __LINE__, #Condition); \ + } while (0) + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/protocol/lufa/LUFA-git/LUFA/Common/Architectures.h b/protocol/lufa/LUFA-git/LUFA/Common/Architectures.h new file mode 100644 index 0000000000..265b412441 --- /dev/null +++ b/protocol/lufa/LUFA-git/LUFA/Common/Architectures.h @@ -0,0 +1,84 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2014. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Supported library architecture defines. + * + * \copydetails Group_Architectures + * + * \note Do not include this file directly, rather include the Common.h header file instead to gain this file's + * functionality. + */ + +/** \ingroup Group_Common + * \defgroup Group_Architectures Hardware Architectures + * \brief Supported library architecture defines. + * + * Architecture macros for selecting the desired target microcontroller architecture. One of these values should be + * defined as the value of \c ARCH in the user project makefile via the \c -D compiler switch to GCC, to select the + * target architecture. + * + * The selected architecture should remain consistent with the makefile \c ARCH value, which is used to select the + * underlying driver source files for each architecture. + * + * @{ + */ + +#ifndef __LUFA_ARCHITECTURES_H__ +#define __LUFA_ARCHITECTURES_H__ + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_COMMON_H) + #error Do not include this file directly. Include LUFA/Common/Common.h instead to gain this functionality. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** Selects the Atmel 8-bit AVR (AT90USB* and ATMEGA*U* chips) architecture. */ + #define ARCH_AVR8 0 + + /** Selects the Atmel 32-bit UC3 AVR (AT32UC3* chips) architecture. */ + #define ARCH_UC3 1 + + /** Selects the Atmel XMEGA AVR (ATXMEGA* chips) architecture. */ + #define ARCH_XMEGA 2 + + #if !defined(__DOXYGEN__) + #define ARCH_ ARCH_AVR8 + + #if !defined(ARCH) + #define ARCH ARCH_AVR8 + #endif + #endif + +#endif + +/** @} */ + diff --git a/protocol/lufa/LUFA-git/LUFA/Common/Attributes.h b/protocol/lufa/LUFA-git/LUFA/Common/Attributes.h new file mode 100644 index 0000000000..dc5c6be4c7 --- /dev/null +++ b/protocol/lufa/LUFA-git/LUFA/Common/Attributes.h @@ -0,0 +1,150 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2014. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Special function/variable attribute macros. + * + * \copydetails Group_FuncVarAttributes + * + * \note Do not include this file directly, rather include the Common.h header file instead to gain this file's + * functionality. + */ + +/** \ingroup Group_Common + * \defgroup Group_FuncVarAttributes Function/Variable Attributes + * \brief Special function/variable attribute macros. + * + * This module contains macros for applying specific attributes to functions and variables to control various + * optimizer and code generation features of the compiler. Attributes may be placed in the function prototype + * or variable declaration in any order, and multiple attributes can be specified for a single item via a space + * separated list. + * + * On incompatible versions of GCC or on other compilers, these macros evaluate to nothing unless they are + * critical to the code's function and thus must throw a compile error when used. + * + * @{ + */ + +#ifndef __LUFA_ATTR_H__ +#define __LUFA_ATTR_H__ + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_COMMON_H) + #error Do not include this file directly. Include LUFA/Common/Common.h instead to gain this functionality. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + #if (__GNUC__ >= 3) || defined(__DOXYGEN__) + /** Indicates to the compiler that the function can not ever return, so that any stack restoring or + * return code may be omitted by the compiler in the resulting binary. + */ + #define ATTR_NO_RETURN __attribute__ ((noreturn)) + + /** Indicates that the function returns a value which should not be ignored by the user code. When + * applied, any ignored return value from calling the function will produce a compiler warning. + */ + #define ATTR_WARN_UNUSED_RESULT __attribute__ ((warn_unused_result)) + + /** Indicates that the specified parameters of the function are pointers which should never be \c NULL. + * When applied as a 1-based comma separated list the compiler will emit a warning if the specified + * parameters are known at compiler time to be \c NULL at the point of calling the function. + */ + #define ATTR_NON_NULL_PTR_ARG(...) __attribute__ ((nonnull (__VA_ARGS__))) + + /** Removes any preamble or postamble from the function. When used, the function will not have any + * register or stack saving code. This should be used with caution, and when used the programmer + * is responsible for maintaining stack and register integrity. + */ + #define ATTR_NAKED __attribute__ ((naked)) + + /** Prevents the compiler from considering a specified function for in-lining. When applied, the given + * function will not be in-lined under any circumstances. + */ + #define ATTR_NO_INLINE __attribute__ ((noinline)) + + /** Forces the compiler to inline the specified function. When applied, the given function will be + * in-lined under all circumstances. + */ + #define ATTR_ALWAYS_INLINE __attribute__ ((always_inline)) + + /** Indicates that the specified function is pure, in that it has no side-effects other than global + * or parameter variable access. + */ + #define ATTR_PURE __attribute__ ((pure)) + + /** Indicates that the specified function is constant, in that it has no side effects other than + * parameter access. + */ + #define ATTR_CONST __attribute__ ((const)) + + /** Marks a given function as deprecated, which produces a warning if the function is called. */ + #define ATTR_DEPRECATED __attribute__ ((deprecated)) + + /** Marks a function as a weak reference, which can be overridden by other functions with an + * identical name (in which case the weak reference is discarded at link time). + */ + #define ATTR_WEAK __attribute__ ((weak)) + #endif + + /** Forces the compiler to not automatically zero the given global variable on startup, so that the + * current RAM contents is retained. Under most conditions this value will be random due to the + * behavior of volatile memory once power is removed, but may be used in some specific circumstances, + * like the passing of values back after a system watchdog reset. + */ + #define ATTR_NO_INIT __attribute__ ((section (".noinit"))) + + /** Places the function in one of the initialization sections, which execute before the main function + * of the application. Refer to the avr-libc manual for more information on the initialization sections. + * + * \param[in] SectionIndex Initialization section number where the function should be placed. + */ + #define ATTR_INIT_SECTION(SectionIndex) __attribute__ ((used, naked, section (".init" #SectionIndex ))) + + /** Marks a function as an alias for another function. + * + * \param[in] Func Name of the function which the given function name should alias. + */ + #define ATTR_ALIAS(Func) __attribute__ ((alias( #Func ))) + + /** Marks a variable or struct element for packing into the smallest space available, omitting any + * alignment bytes usually added between fields to optimize field accesses. + */ + #define ATTR_PACKED __attribute__ ((packed)) + + /** Indicates the minimum alignment in bytes for a variable or struct element. + * + * \param[in] Bytes Minimum number of bytes the item should be aligned to. + */ + #define ATTR_ALIGNED(Bytes) __attribute__ ((aligned(Bytes))) +#endif + +/** @} */ + diff --git a/protocol/lufa/LUFA-git/LUFA/Common/BoardTypes.h b/protocol/lufa/LUFA-git/LUFA/Common/BoardTypes.h new file mode 100644 index 0000000000..06ff4ddb4a --- /dev/null +++ b/protocol/lufa/LUFA-git/LUFA/Common/BoardTypes.h @@ -0,0 +1,254 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2014. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Supported pre-made board hardware defines. + * + * \copydetails Group_BoardTypes + * + * \note Do not include this file directly, rather include the Common.h header file instead to gain this file's + * functionality. + */ + +/** \ingroup Group_Common + * \defgroup Group_BoardTypes Board Types + * \brief Supported pre-made board hardware defines. + * + * Board macros for indicating the chosen physical board hardware to the library. These macros should be used when + * defining the \c BOARD token to the chosen hardware via the \c -D switch in the project makefile. If a custom + * board is used, the \ref BOARD_NONE or \ref BOARD_USER values should be selected. + * + * @{ + */ + +#ifndef __LUFA_BOARDTYPES_H__ +#define __LUFA_BOARDTYPES_H__ + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_COMMON_H) + #error Do not include this file directly. Include LUFA/Common/Common.h instead to gain this functionality. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** Selects the user-defined board drivers, which should be placed in the user project's folder + * under a directory named \c /Board/. Each board driver should be named identically to the LUFA + * master board driver (i.e., driver in the \c LUFA/Drivers/Board directory) so that the library + * can correctly identify it. + */ + #define BOARD_USER 0 + + /** Disables board drivers when operation will not be adversely affected (e.g. LEDs) - use of board drivers + * such as the Joystick driver, where the removal would adversely affect the code's operation is still disallowed. */ + #define BOARD_NONE 1 + + /** Selects the USBKEY specific board drivers, including Temperature, Button, Dataflash, Joystick and LED drivers. */ + #define BOARD_USBKEY 2 + + /** Selects the STK525 specific board drivers, including Temperature, Button, Dataflash, Joystick and LED drivers. */ + #define BOARD_STK525 3 + + /** Selects the STK526 specific board drivers, including Temperature, Button, Dataflash, Joystick and LED drivers. */ + #define BOARD_STK526 4 + + /** Selects the RZUSBSTICK specific board drivers, including the driver for the boards LEDs. */ + #define BOARD_RZUSBSTICK 5 + + /** Selects the ATAVRUSBRF01 specific board drivers, including the driver for the board LEDs. */ + #define BOARD_ATAVRUSBRF01 6 + + /** Selects the BUMBLEB specific board drivers, using the officially recommended peripheral layout. */ + #define BOARD_BUMBLEB 7 + + /** Selects the XPLAIN (Revision 2 or newer) specific board drivers, including LED and Dataflash drivers. */ + #define BOARD_XPLAIN 8 + + /** Selects the XPLAIN (Revision 1) specific board drivers, including LED and Dataflash drivers. */ + #define BOARD_XPLAIN_REV1 9 + + /** Selects the EVK527 specific board drivers, including Temperature, Button, Dataflash, Joystick and LED drivers. */ + #define BOARD_EVK527 10 + + /** Selects the Teensy version 1.x specific board drivers, including the driver for the board LEDs. */ + #define BOARD_TEENSY 11 + + /** Selects the USBTINY MKII specific board drivers, including the Button and LEDs drivers. */ + #define BOARD_USBTINYMKII 12 + + /** Selects the Benito specific board drivers, including the Button and LEDs drivers. */ + #define BOARD_BENITO 13 + + /** Selects the JM-DB-U2 specific board drivers, including the Button and LEDs drivers. */ + #define BOARD_JMDBU2 14 + + /** Selects the Olimex AVR-USB-162 specific board drivers, including the Button and LEDs drivers. */ + #define BOARD_OLIMEX162 15 + + /** Selects the UDIP specific board drivers, including the Button and LEDs drivers. */ + #define BOARD_UDIP 16 + + /** Selects the BUI specific board drivers, including the driver for the board LEDs. */ + #define BOARD_BUI 17 + + /** Selects the Arduino Uno specific board drivers, including the driver for the board LEDs. */ + #define BOARD_UNO 18 + + /** Selects the Busware CUL V3 specific board drivers, including the Button and LEDs drivers. */ + #define BOARD_CULV3 19 + + /** Selects the Blackcat USB JTAG specific board drivers, including the driver for the board LEDs. */ + #define BOARD_BLACKCAT 20 + + /** Selects the Maximus specific board drivers, including the driver for the board LEDs. */ + #define BOARD_MAXIMUS 21 + + /** Selects the Minimus specific board drivers, including the Button and LEDs drivers. */ + #define BOARD_MINIMUS 22 + + /** Selects the Adafruit U4 specific board drivers, including the Button driver. */ + #define BOARD_ADAFRUITU4 23 + + /** Selects the Microsin AVR-USB162 specific board drivers, including the Button and LEDs drivers. */ + #define BOARD_MICROSIN162 24 + + /** Selects the Kernel Concepts USBFOO specific board drivers, including the Button and LEDs drivers. */ + #define BOARD_USBFOO 25 + + /** Selects the Sparkfun ATMEGA8U2 specific board drivers, including the driver for the board LEDs. */ + #define BOARD_SPARKFUN8U2 26 + + /** Selects the Atmel EVK1101 specific board drivers, including the Button, Joystick and LED drivers. */ + #define BOARD_EVK1101 27 + + /** Selects the Busware TUL specific board drivers, including the Button and LED drivers. */ + #define BOARD_TUL 28 + + /** Selects the Atmel EVK1100 specific board drivers, including the Button, Joystick and LED drivers. */ + #define BOARD_EVK1100 29 + + /** Selects the Atmel EVK1104 specific board drivers, including the Button and LED drivers. */ + #define BOARD_EVK1104 30 + + /** Selects the Atmel XMEGA A3BU Xplained specific board drivers, including Dataflash, Button and LED drivers. */ + #define BOARD_A3BU_XPLAINED 31 + + /** Selects the Teensy version 2.x specific board drivers, including the driver for the board LEDs. */ + #define BOARD_TEENSY2 32 + + /** Selects the USB2AX version 1 and 2 specific board drivers, including the Button and LEDs drivers. */ + #define BOARD_USB2AX 33 + + /** Selects the USB2AX version 3 specific board drivers, including the Button and LEDs drivers. */ + #define BOARD_USB2AX_V3 34 + + /** Selects the Micropendous 32U2 specific board drivers, including the Button and LED drivers. */ + #define BOARD_MICROPENDOUS_32U2 35 + + /** Selects the Micropendous A specific board drivers, including the driver for the board Button. */ + #define BOARD_MICROPENDOUS_A 36 + + /** Selects the Micropendous 1 specific board drivers, including the driver for the board Button. */ + #define BOARD_MICROPENDOUS_1 37 + + /** Selects the Micropendous 2 specific board drivers, including the driver for the board Button. */ + #define BOARD_MICROPENDOUS_2 38 + + /** Selects the Micropendous 3 specific board drivers, including the driver for the board Button. */ + #define BOARD_MICROPENDOUS_3 39 + + /** Selects the Micropendous 4 specific board drivers, including the driver for the board Button. */ + #define BOARD_MICROPENDOUS_4 40 + + /** Selects the Micropendous DIP specific board drivers, including the driver for the board Button. */ + #define BOARD_MICROPENDOUS_DIP 41 + + /** Selects the Micropendous (Arduino-like) revision 1 specific board drivers, including the Button and LED drivers. */ + #define BOARD_MICROPENDOUS_REV1 42 + + /** Selects the Micropendous (Arduino-like) revision 2 specific board drivers, including the Button and LED drivers. */ + #define BOARD_MICROPENDOUS_REV2 43 + + /** Selects the XMEGA B1 Xplained specific board drivers, including the Button and LED drivers. */ + #define BOARD_B1_XPLAINED 44 + + /** Selects the Bitwizard Multio specific board drivers, including the driver for the board LEDs. */ + #define BOARD_MULTIO 45 + + /** Selects the Bitwizard Big-Multio specific board drivers, including the driver for the board LEDs. */ + #define BOARD_BIGMULTIO 46 + + /** Selects the DorkbotPDX Duce specific board drivers, including the driver for the board LEDs. */ + #define BOARD_DUCE 47 + + /** Selects the Olimex AVR-USB-32U4 specific board drivers, including the Button and LED drivers. */ + #define BOARD_OLIMEX32U4 48 + + /** Selects the Olimex AVR-USB-T32U4 specific board drivers, including the Button and LED drivers. */ + #define BOARD_OLIMEXT32U4 49 + + /** Selects the Olimex AVR-ISP-MK2 specific board drivers, including the Button and LED drivers. */ + #define BOARD_OLIMEXISPMK2 50 + + /** Selects the Arduino Leonardo specific board drivers, including the driver for the board LEDs. */ + #define BOARD_LEONARDO 51 + + /** Selects the UC3-A3 Xplained specific board drivers, including the Button and LED drivers. */ + #define BOARD_UC3A3_XPLAINED 52 + + /** Selects the USB2AX version 3.1 specific board drivers, including the Button and LEDs drivers. */ + #define BOARD_USB2AX_V31 53 + + /** Selects the Stange-ISP specific board drivers, including the Button and LEDs drivers. */ + #define BOARD_STANGE_ISP 54 + + /** Selects the XMEGA C3 XPLAINED specific board drivers, including the Button and LEDs drivers. */ + #define BOARD_C3_XPLAINED 55 + + /** Selects the U2S specific board drivers, including the Button and LEDs drivers. */ + #define BOARD_U2S 56 + + /** Selects the Arduino YUN specific board drivers, including the driver for the board LEDs. */ + #define BOARD_YUN 57 + + /** Selects the Arduino Micro specific board drivers, including the driver for the board LEDs. */ + #define BOARD_MICRO 58 + + #if !defined(__DOXYGEN__) + #define BOARD_ BOARD_NONE + + #if !defined(BOARD) + #define BOARD BOARD_NONE + #endif + #endif + +#endif + +/** @} */ + diff --git a/protocol/lufa/LUFA-git/LUFA/Common/Common.h b/protocol/lufa/LUFA-git/LUFA/Common/Common.h new file mode 100644 index 0000000000..3e12e4f33f --- /dev/null +++ b/protocol/lufa/LUFA-git/LUFA/Common/Common.h @@ -0,0 +1,393 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2014. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \dir + * \brief Common library header files. + * + * This folder contains header files which are common to all parts of the LUFA library. They may be used freely in + * user applications. + */ + +/** \file + * \brief Common library convenience headers, macros and functions. + * + * \copydetails Group_Common + */ + +/** \defgroup Group_Common Common Utility Headers - LUFA/Drivers/Common/Common.h + * \brief Common library convenience headers, macros and functions. + * + * Common utility headers containing macros, functions, enums and types which are common to all + * aspects of the library. + * + * @{ + */ + +/** \defgroup Group_GlobalInt Global Interrupt Macros + * \brief Convenience macros for the management of interrupts globally within the device. + * + * Macros and functions to create and control global interrupts within the device. + */ + +#ifndef __LUFA_COMMON_H__ +#define __LUFA_COMMON_H__ + + /* Macros: */ + #define __INCLUDE_FROM_COMMON_H + + /* Includes: */ + #include <stdint.h> + #include <stdbool.h> + #include <string.h> + #include <stddef.h> + + #include "Architectures.h" + #include "BoardTypes.h" + #include "ArchitectureSpecific.h" + #include "CompilerSpecific.h" + #include "Attributes.h" + + #if defined(USE_LUFA_CONFIG_HEADER) + #include "LUFAConfig.h" + #endif + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Architecture specific utility includes: */ + #if defined(__DOXYGEN__) + /** Type define for an unsigned integer the same width as the selected architecture's machine register. + * This is distinct from the non-specific standard int data type, whose width is machine dependant but + * which may not reflect the actual machine register width on some targets (e.g. AVR8). + */ + typedef MACHINE_REG_t uint_reg_t; + #elif (ARCH == ARCH_AVR8) + #include <avr/io.h> + #include <avr/interrupt.h> + #include <avr/pgmspace.h> + #include <avr/eeprom.h> + #include <avr/boot.h> + #include <math.h> + #include <util/delay.h> + + typedef uint8_t uint_reg_t; + + #define ARCH_HAS_EEPROM_ADDRESS_SPACE + #define ARCH_HAS_FLASH_ADDRESS_SPACE + #define ARCH_HAS_MULTI_ADDRESS_SPACE + #define ARCH_LITTLE_ENDIAN + + #include "Endianness.h" + #elif (ARCH == ARCH_UC3) + #include <avr32/io.h> + #include <math.h> + + // === TODO: Find abstracted way to handle these === + #define PROGMEM + #define pgm_read_byte(x) *x + #define memcmp_P(...) memcmp(__VA_ARGS__) + #define memcpy_P(...) memcpy(__VA_ARGS__) + // ================================================= + + typedef uint32_t uint_reg_t; + + #define ARCH_BIG_ENDIAN + + #include "Endianness.h" + #elif (ARCH == ARCH_XMEGA) + #include <avr/io.h> + #include <avr/interrupt.h> + #include <avr/pgmspace.h> + #include <avr/eeprom.h> + #include <math.h> + #include <util/delay.h> + + typedef uint8_t uint_reg_t; + + #define ARCH_HAS_EEPROM_ADDRESS_SPACE + #define ARCH_HAS_FLASH_ADDRESS_SPACE + #define ARCH_HAS_MULTI_ADDRESS_SPACE + #define ARCH_LITTLE_ENDIAN + + #include "Endianness.h" + #else + #error Unknown device architecture specified. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + #if !defined(__DOXYGEN__) + // Obsolete, retained for compatibility with user code + #define MACROS do + #define MACROE while (0) + #endif + + /** Convenience macro to determine the larger of two values. + * + * \attention This macro should only be used with operands that do not have side effects from being evaluated + * multiple times. + * + * \param[in] x First value to compare + * \param[in] y First value to compare + * + * \return The larger of the two input parameters + */ + #if !defined(MAX) || defined(__DOXYGEN__) + #define MAX(x, y) (((x) > (y)) ? (x) : (y)) + #endif + + /** Convenience macro to determine the smaller of two values. + * + * \attention This macro should only be used with operands that do not have side effects from being evaluated + * multiple times. + * + * \param[in] x First value to compare. + * \param[in] y First value to compare. + * + * \return The smaller of the two input parameters + */ + #if !defined(MIN) || defined(__DOXYGEN__) + #define MIN(x, y) (((x) < (y)) ? (x) : (y)) + #endif + + #if !defined(STRINGIFY) || defined(__DOXYGEN__) + /** Converts the given input into a string, via the C Preprocessor. This macro puts literal quotation + * marks around the input, converting the source into a string literal. + * + * \param[in] x Input to convert into a string literal. + * + * \return String version of the input. + */ + #define STRINGIFY(x) #x + + /** Converts the given input into a string after macro expansion, via the C Preprocessor. This macro puts + * literal quotation marks around the expanded input, converting the source into a string literal. + * + * \param[in] x Input to expand and convert into a string literal. + * + * \return String version of the expanded input. + */ + #define STRINGIFY_EXPANDED(x) STRINGIFY(x) + #endif + + #if !defined(CONCAT) || defined(__DOXYGEN__) + /** Concatenates the given input into a single token, via the C Preprocessor. + * + * \param[in] x First item to concatenate. + * \param[in] y Second item to concatenate. + * + * \return Concatenated version of the input. + */ + #define CONCAT(x, y) x ## y + + /** CConcatenates the given input into a single token after macro expansion, via the C Preprocessor. + * + * \param[in] x First item to concatenate. + * \param[in] y Second item to concatenate. + * + * \return Concatenated version of the expanded input. + */ + #define CONCAT_EXPANDED(x, y) CONCAT(x, y) + #endif + + #if !defined(ISR) || defined(__DOXYGEN__) + /** Macro for the definition of interrupt service routines, so that the compiler can insert the required + * prologue and epilogue code to properly manage the interrupt routine without affecting the main thread's + * state with unintentional side-effects. + * + * Interrupt handlers written using this macro may still need to be registered with the microcontroller's + * Interrupt Controller (if present) before they will properly handle incoming interrupt events. + * + * \note This macro is only supplied on some architectures, where the standard library does not include a valid + * definition. If an existing definition exists, the alternative definition here will be ignored. + * + * \ingroup Group_GlobalInt + * + * \param[in] Name Unique name of the interrupt service routine. + */ + #define ISR(Name, ...) void Name (void) __attribute__((__interrupt__)) __VA_ARGS__; void Name (void) + #endif + + /* Inline Functions: */ + /** Function to reverse the individual bits in a byte - i.e. bit 7 is moved to bit 0, bit 6 to bit 1, + * etc. + * + * \param[in] Byte Byte of data whose bits are to be reversed. + * + * \return Input data with the individual bits reversed (mirrored). + */ + static inline uint8_t BitReverse(uint8_t Byte) ATTR_WARN_UNUSED_RESULT ATTR_CONST; + static inline uint8_t BitReverse(uint8_t Byte) + { + Byte = (((Byte & 0xF0) >> 4) | ((Byte & 0x0F) << 4)); + Byte = (((Byte & 0xCC) >> 2) | ((Byte & 0x33) << 2)); + Byte = (((Byte & 0xAA) >> 1) | ((Byte & 0x55) << 1)); + + return Byte; + } + + /** Function to perform a blocking delay for a specified number of milliseconds. The actual delay will be + * at a minimum the specified number of milliseconds, however due to loop overhead and internal calculations + * may be slightly higher. + * + * \param[in] Milliseconds Number of milliseconds to delay + */ + static inline void Delay_MS(uint16_t Milliseconds) ATTR_ALWAYS_INLINE; + static inline void Delay_MS(uint16_t Milliseconds) + { + #if (ARCH == ARCH_AVR8) + if (GCC_IS_COMPILE_CONST(Milliseconds)) + { + _delay_ms(Milliseconds); + } + else + { + while (Milliseconds--) + _delay_ms(1); + } + #elif (ARCH == ARCH_UC3) + while (Milliseconds--) + { + __builtin_mtsr(AVR32_COUNT, 0); + while ((uint32_t)__builtin_mfsr(AVR32_COUNT) < (F_CPU / 1000)); + } + #elif (ARCH == ARCH_XMEGA) + if (GCC_IS_COMPILE_CONST(Milliseconds)) + { + _delay_ms(Milliseconds); + } + else + { + while (Milliseconds--) + _delay_ms(1); + } + #endif + } + + /** Retrieves a mask which contains the current state of the global interrupts for the device. This + * value can be stored before altering the global interrupt enable state, before restoring the + * flag(s) back to their previous values after a critical section using \ref SetGlobalInterruptMask(). + * + * \ingroup Group_GlobalInt + * + * \return Mask containing the current Global Interrupt Enable Mask bit(s). + */ + static inline uint_reg_t GetGlobalInterruptMask(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT; + static inline uint_reg_t GetGlobalInterruptMask(void) + { + GCC_MEMORY_BARRIER(); + + #if (ARCH == ARCH_AVR8) + return SREG; + #elif (ARCH == ARCH_UC3) + return __builtin_mfsr(AVR32_SR); + #elif (ARCH == ARCH_XMEGA) + return SREG; + #endif + } + + /** Sets the global interrupt enable state of the microcontroller to the mask passed into the function. + * This can be combined with \ref GetGlobalInterruptMask() to save and restore the Global Interrupt Enable + * Mask bit(s) of the device after a critical section has completed. + * + * \ingroup Group_GlobalInt + * + * \param[in] GlobalIntState Global Interrupt Enable Mask value to use + */ + static inline void SetGlobalInterruptMask(const uint_reg_t GlobalIntState) ATTR_ALWAYS_INLINE; + static inline void SetGlobalInterruptMask(const uint_reg_t GlobalIntState) + { + GCC_MEMORY_BARRIER(); + + #if (ARCH == ARCH_AVR8) + SREG = GlobalIntState; + #elif (ARCH == ARCH_UC3) + if (GlobalIntState & AVR32_SR_GM) + __builtin_ssrf(AVR32_SR_GM_OFFSET); + else + __builtin_csrf(AVR32_SR_GM_OFFSET); + #elif (ARCH == ARCH_XMEGA) + SREG = GlobalIntState; + #endif + + GCC_MEMORY_BARRIER(); + } + + /** Enables global interrupt handling for the device, allowing interrupts to be handled. + * + * \ingroup Group_GlobalInt + */ + static inline void GlobalInterruptEnable(void) ATTR_ALWAYS_INLINE; + static inline void GlobalInterruptEnable(void) + { + GCC_MEMORY_BARRIER(); + + #if (ARCH == ARCH_AVR8) + sei(); + #elif (ARCH == ARCH_UC3) + __builtin_csrf(AVR32_SR_GM_OFFSET); + #elif (ARCH == ARCH_XMEGA) + sei(); + #endif + + GCC_MEMORY_BARRIER(); + } + + /** Disabled global interrupt handling for the device, preventing interrupts from being handled. + * + * \ingroup Group_GlobalInt + */ + static inline void GlobalInterruptDisable(void) ATTR_ALWAYS_INLINE; + static inline void GlobalInterruptDisable(void) + { + GCC_MEMORY_BARRIER(); + + #if (ARCH == ARCH_AVR8) + cli(); + #elif (ARCH == ARCH_UC3) + __builtin_ssrf(AVR32_SR_GM_OFFSET); + #elif (ARCH == ARCH_XMEGA) + cli(); + #endif + + GCC_MEMORY_BARRIER(); + } + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/protocol/lufa/LUFA-git/LUFA/Common/CompilerSpecific.h b/protocol/lufa/LUFA-git/LUFA/Common/CompilerSpecific.h new file mode 100644 index 0000000000..9979fffbbb --- /dev/null +++ b/protocol/lufa/LUFA-git/LUFA/Common/CompilerSpecific.h @@ -0,0 +1,97 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2014. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Compiler specific definitions for code optimization and correctness. + * + * \copydetails Group_CompilerSpecific + * + * \note Do not include this file directly, rather include the Common.h header file instead to gain this file's + * functionality. + */ + +/** \ingroup Group_Common + * \defgroup Group_CompilerSpecific Compiler Specific Definitions + * \brief Compiler specific definitions for code optimization and correctness. + * + * Compiler specific definitions to expose certain compiler features which may increase the level of code optimization + * for a specific compiler, or correct certain issues that may be present such as memory barriers for use in conjunction + * with atomic variable access. + * + * Where possible, on alternative compilers, these macros will either have no effect, or default to returning a sane value + * so that they can be used in existing code without the need for extra compiler checks in the user application code. + * + * @{ + */ + +#ifndef __LUFA_COMPILERSPEC_H__ +#define __LUFA_COMPILERSPEC_H__ + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_COMMON_H) + #error Do not include this file directly. Include LUFA/Common/Common.h instead to gain this functionality. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + #if defined(__GNUC__) || defined(__DOXYGEN__) + /** Forces GCC to use pointer indirection (via the device's pointer register pairs) when accessing the given + * struct pointer. In some cases GCC will emit non-optimal assembly code when accessing a structure through + * a pointer, resulting in a larger binary. When this macro is used on a (non \c const) structure pointer before + * use, it will force GCC to use pointer indirection on the elements rather than direct store and load + * instructions. + * + * \param[in, out] StructPtr Pointer to a structure which is to be forced into indirect access mode. + */ + #define GCC_FORCE_POINTER_ACCESS(StructPtr) __asm__ __volatile__("" : "=b" (StructPtr) : "0" (StructPtr)) + + /** Forces GCC to create a memory barrier, ensuring that memory accesses are not reordered past the barrier point. + * This can be used before ordering-critical operations, to ensure that the compiler does not re-order the resulting + * assembly output in an unexpected manner on sections of code that are ordering-specific. + */ + #define GCC_MEMORY_BARRIER() __asm__ __volatile__("" ::: "memory"); + + /** Determines if the specified value can be determined at compile-time to be a constant value when compiling under GCC. + * + * \param[in] x Value to check compile-time constantness of. + * + * \return Boolean \c true if the given value is known to be a compile time constant, \c false otherwise. + */ + #define GCC_IS_COMPILE_CONST(x) __builtin_constant_p(x) + #else + #define GCC_FORCE_POINTER_ACCESS(StructPtr) + #define GCC_MEMORY_BARRIER() + #define GCC_IS_COMPILE_CONST(x) 0 + #endif + +#endif + +/** @} */ + diff --git a/protocol/lufa/LUFA-git/LUFA/Common/Endianness.h b/protocol/lufa/LUFA-git/LUFA/Common/Endianness.h new file mode 100644 index 0000000000..2eb3ad0947 --- /dev/null +++ b/protocol/lufa/LUFA-git/LUFA/Common/Endianness.h @@ -0,0 +1,493 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2014. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Endianness and Byte Ordering macros and functions. + * + * \copydetails Group_Endianness + */ + +/** \ingroup Group_Endianness + * \defgroup Group_ByteSwapping Byte Reordering + * \brief Macros and functions for forced byte reordering. + */ + +/** \ingroup Group_Endianness + * \defgroup Group_EndianConversion Endianness Conversion + * \brief Macros and functions for automatic endianness conversion. + */ + +/** \ingroup Group_Common + * \defgroup Group_Endianness Endianness and Byte Ordering + * \brief Convenience macros and functions relating to byte (re-)ordering + * + * Common library convenience macros and functions relating to byte (re-)ordering. + * + * @{ + */ + +#ifndef __LUFA_ENDIANNESS_H__ +#define __LUFA_ENDIANNESS_H__ + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_COMMON_H) + #error Do not include this file directly. Include LUFA/Common/Common.h instead to gain this functionality. + #endif + + #if !(defined(ARCH_BIG_ENDIAN) || defined(ARCH_LITTLE_ENDIAN)) + #error ARCH_BIG_ENDIAN or ARCH_LITTLE_ENDIAN not set for the specified architecture. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** Swaps the byte ordering of a 16-bit value at compile-time. Do not use this macro for swapping byte orderings + * of dynamic values computed at runtime, use \ref SwapEndian_16() instead. The result of this macro can be used + * inside struct or other variable initializers outside of a function, something that is not possible with the + * inline function variant. + * + * \hideinitializer + * + * \ingroup Group_ByteSwapping + * + * \param[in] x 16-bit value whose byte ordering is to be swapped. + * + * \return Input value with the byte ordering reversed. + */ + #define SWAPENDIAN_16(x) (uint16_t)((((x) & 0xFF00) >> 8) | (((x) & 0x00FF) << 8)) + + /** Swaps the byte ordering of a 32-bit value at compile-time. Do not use this macro for swapping byte orderings + * of dynamic values computed at runtime- use \ref SwapEndian_32() instead. The result of this macro can be used + * inside struct or other variable initializers outside of a function, something that is not possible with the + * inline function variant. + * + * \hideinitializer + * + * \ingroup Group_ByteSwapping + * + * \param[in] x 32-bit value whose byte ordering is to be swapped. + * + * \return Input value with the byte ordering reversed. + */ + #define SWAPENDIAN_32(x) (uint32_t)((((x) & 0xFF000000UL) >> 24UL) | (((x) & 0x00FF0000UL) >> 8UL) | \ + (((x) & 0x0000FF00UL) << 8UL) | (((x) & 0x000000FFUL) << 24UL)) + + #if defined(ARCH_BIG_ENDIAN) && !defined(le16_to_cpu) + #define le16_to_cpu(x) SwapEndian_16(x) + #define le32_to_cpu(x) SwapEndian_32(x) + #define be16_to_cpu(x) (x) + #define be32_to_cpu(x) (x) + #define cpu_to_le16(x) SwapEndian_16(x) + #define cpu_to_le32(x) SwapEndian_32(x) + #define cpu_to_be16(x) (x) + #define cpu_to_be32(x) (x) + #define LE16_TO_CPU(x) SWAPENDIAN_16(x) + #define LE32_TO_CPU(x) SWAPENDIAN_32(x) + #define BE16_TO_CPU(x) (x) + #define BE32_TO_CPU(x) (x) + #define CPU_TO_LE16(x) SWAPENDIAN_16(x) + #define CPU_TO_LE32(x) SWAPENDIAN_32(x) + #define CPU_TO_BE16(x) (x) + #define CPU_TO_BE32(x) (x) + #elif !defined(le16_to_cpu) + /** \name Run-time endianness conversion */ + //@{ + + /** Performs a conversion between a Little Endian encoded 16-bit piece of data and the + * Endianness of the currently selected CPU architecture. + * + * On little endian architectures, this macro does nothing. + * + * \note This macro is designed for run-time conversion of data - for compile-time endianness + * conversion, use \ref LE16_TO_CPU instead. + * + * \ingroup Group_EndianConversion + * + * \param[in] x Data to perform the endianness conversion on. + * + * \return Endian corrected version of the input value. + */ + #define le16_to_cpu(x) (x) + + /** Performs a conversion between a Little Endian encoded 32-bit piece of data and the + * Endianness of the currently selected CPU architecture. + * + * On little endian architectures, this macro does nothing. + * + * \note This macro is designed for run-time conversion of data - for compile-time endianness + * conversion, use \ref LE32_TO_CPU instead. + * + * \ingroup Group_EndianConversion + * + * \param[in] x Data to perform the endianness conversion on. + * + * \return Endian corrected version of the input value. + */ + #define le32_to_cpu(x) (x) + + /** Performs a conversion between a Big Endian encoded 16-bit piece of data and the + * Endianness of the currently selected CPU architecture. + * + * On big endian architectures, this macro does nothing. + * + * \note This macro is designed for run-time conversion of data - for compile-time endianness + * conversion, use \ref BE16_TO_CPU instead. + * + * \ingroup Group_EndianConversion + * + * \param[in] x Data to perform the endianness conversion on. + * + * \return Endian corrected version of the input value. + */ + #define be16_to_cpu(x) SwapEndian_16(x) + + /** Performs a conversion between a Big Endian encoded 32-bit piece of data and the + * Endianness of the currently selected CPU architecture. + * + * On big endian architectures, this macro does nothing. + * + * \note This macro is designed for run-time conversion of data - for compile-time endianness + * conversion, use \ref BE32_TO_CPU instead. + * + * \ingroup Group_EndianConversion + * + * \param[in] x Data to perform the endianness conversion on. + * + * \return Endian corrected version of the input value. + */ + #define be32_to_cpu(x) SwapEndian_32(x) + + /** Performs a conversion on a natively encoded 16-bit piece of data to ensure that it + * is in Little Endian format regardless of the currently selected CPU architecture. + * + * On little endian architectures, this macro does nothing. + * + * \note This macro is designed for run-time conversion of data - for compile-time endianness + * conversion, use \ref CPU_TO_LE16 instead. + * + * \ingroup Group_EndianConversion + * + * \param[in] x Data to perform the endianness conversion on. + * + * \return Endian corrected version of the input value. + */ + #define cpu_to_le16(x) (x) + + /** Performs a conversion on a natively encoded 32-bit piece of data to ensure that it + * is in Little Endian format regardless of the currently selected CPU architecture. + * + * On little endian architectures, this macro does nothing. + * + * \note This macro is designed for run-time conversion of data - for compile-time endianness + * conversion, use \ref CPU_TO_LE32 instead. + * + * \ingroup Group_EndianConversion + * + * \param[in] x Data to perform the endianness conversion on. + * + * \return Endian corrected version of the input value. + */ + #define cpu_to_le32(x) (x) + + /** Performs a conversion on a natively encoded 16-bit piece of data to ensure that it + * is in Big Endian format regardless of the currently selected CPU architecture. + * + * On big endian architectures, this macro does nothing. + * + * \note This macro is designed for run-time conversion of data - for compile-time endianness + * conversion, use \ref CPU_TO_BE16 instead. + * + * \ingroup Group_EndianConversion + * + * \param[in] x Data to perform the endianness conversion on. + * + * \return Endian corrected version of the input value. + */ + #define cpu_to_be16(x) SwapEndian_16(x) + + /** Performs a conversion on a natively encoded 32-bit piece of data to ensure that it + * is in Big Endian format regardless of the currently selected CPU architecture. + * + * On big endian architectures, this macro does nothing. + * + * \note This macro is designed for run-time conversion of data - for compile-time endianness + * conversion, use \ref CPU_TO_BE32 instead. + * + * \ingroup Group_EndianConversion + * + * \param[in] x Data to perform the endianness conversion on. + * + * \return Endian corrected version of the input value. + */ + #define cpu_to_be32(x) SwapEndian_32(x) + + //@} + + /** \name Compile-time endianness conversion */ + //@{ + + /** Performs a conversion between a Little Endian encoded 16-bit piece of data and the + * Endianness of the currently selected CPU architecture. + * + * On little endian architectures, this macro does nothing. + * + * \note This macro is designed for compile-time conversion of data - for run time endianness + * conversion, use \ref le16_to_cpu instead. + * + * \ingroup Group_EndianConversion + * + * \param[in] x Data to perform the endianness conversion on. + * + * \return Endian corrected version of the input value. + */ + #define LE16_TO_CPU(x) (x) + + /** Performs a conversion between a Little Endian encoded 32-bit piece of data and the + * Endianness of the currently selected CPU architecture. + * + * On little endian architectures, this macro does nothing. + * + * \note This macro is designed for compile-time conversion of data - for run time endianness + * conversion, use \ref le32_to_cpu instead. + * + * \ingroup Group_EndianConversion + * + * \param[in] x Data to perform the endianness conversion on. + * + * \return Endian corrected version of the input value. + */ + #define LE32_TO_CPU(x) (x) + + /** Performs a conversion between a Big Endian encoded 16-bit piece of data and the + * Endianness of the currently selected CPU architecture. + * + * On big endian architectures, this macro does nothing. + * + * \note This macro is designed for compile-time conversion of data - for run-time endianness + * conversion, use \ref be16_to_cpu instead. + * + * \ingroup Group_EndianConversion + * + * \param[in] x Data to perform the endianness conversion on. + * + * \return Endian corrected version of the input value. + */ + #define BE16_TO_CPU(x) SWAPENDIAN_16(x) + + /** Performs a conversion between a Big Endian encoded 32-bit piece of data and the + * Endianness of the currently selected CPU architecture. + * + * On big endian architectures, this macro does nothing. + * + * \note This macro is designed for compile-time conversion of data - for run-time endianness + * conversion, use \ref be32_to_cpu instead. + * + * \ingroup Group_EndianConversion + * + * \param[in] x Data to perform the endianness conversion on. + * + * \return Endian corrected version of the input value. + */ + #define BE32_TO_CPU(x) SWAPENDIAN_32(x) + + /** Performs a conversion on a natively encoded 16-bit piece of data to ensure that it + * is in Little Endian format regardless of the currently selected CPU architecture. + * + * On little endian architectures, this macro does nothing. + * + * \note This macro is designed for compile-time conversion of data - for run-time endianness + * conversion, use \ref cpu_to_le16 instead. + * + * \ingroup Group_EndianConversion + * + * \param[in] x Data to perform the endianness conversion on. + * + * \return Endian corrected version of the input value. + */ + #define CPU_TO_LE16(x) (x) + + /** Performs a conversion on a natively encoded 32-bit piece of data to ensure that it + * is in Little Endian format regardless of the currently selected CPU architecture. + * + * On little endian architectures, this macro does nothing. + * + * \note This macro is designed for compile-time conversion of data - for run-time endianness + * conversion, use \ref cpu_to_le32 instead. + * + * \ingroup Group_EndianConversion + * + * \param[in] x Data to perform the endianness conversion on. + * + * \return Endian corrected version of the input value. + */ + #define CPU_TO_LE32(x) (x) + + /** Performs a conversion on a natively encoded 16-bit piece of data to ensure that it + * is in Big Endian format regardless of the currently selected CPU architecture. + * + * On big endian architectures, this macro does nothing. + * + * \note This macro is designed for compile-time conversion of data - for run-time endianness + * conversion, use \ref cpu_to_be16 instead. + * + * \ingroup Group_EndianConversion + * + * \param[in] x Data to perform the endianness conversion on. + * + * \return Endian corrected version of the input value. + */ + #define CPU_TO_BE16(x) SWAPENDIAN_16(x) + + /** Performs a conversion on a natively encoded 32-bit piece of data to ensure that it + * is in Big Endian format regardless of the currently selected CPU architecture. + * + * On big endian architectures, this macro does nothing. + * + * \note This macro is designed for compile-time conversion of data - for run-time endianness + * conversion, use \ref cpu_to_be32 instead. + * + * \ingroup Group_EndianConversion + * + * \param[in] x Data to perform the endianness conversion on. + * + * \return Endian corrected version of the input value. + */ + #define CPU_TO_BE32(x) SWAPENDIAN_32(x) + + //! @} + #endif + + /* Inline Functions: */ + /** Function to reverse the byte ordering of the individual bytes in a 16 bit value. + * + * \ingroup Group_ByteSwapping + * + * \param[in] Word Word of data whose bytes are to be swapped. + * + * \return Input data with the individual bytes reversed. + */ + static inline uint16_t SwapEndian_16(const uint16_t Word) ATTR_WARN_UNUSED_RESULT ATTR_CONST; + static inline uint16_t SwapEndian_16(const uint16_t Word) + { + if (GCC_IS_COMPILE_CONST(Word)) + return SWAPENDIAN_16(Word); + + uint8_t Temp; + + union + { + uint16_t Word; + uint8_t Bytes[2]; + } Data; + + Data.Word = Word; + + Temp = Data.Bytes[0]; + Data.Bytes[0] = Data.Bytes[1]; + Data.Bytes[1] = Temp; + + return Data.Word; + } + + /** Function to reverse the byte ordering of the individual bytes in a 32 bit value. + * + * \ingroup Group_ByteSwapping + * + * \param[in] DWord Double word of data whose bytes are to be swapped. + * + * \return Input data with the individual bytes reversed. + */ + static inline uint32_t SwapEndian_32(const uint32_t DWord) ATTR_WARN_UNUSED_RESULT ATTR_CONST; + static inline uint32_t SwapEndian_32(const uint32_t DWord) + { + if (GCC_IS_COMPILE_CONST(DWord)) + return SWAPENDIAN_32(DWord); + + uint8_t Temp; + + union + { + uint32_t DWord; + uint8_t Bytes[4]; + } Data; + + Data.DWord = DWord; + + Temp = Data.Bytes[0]; + Data.Bytes[0] = Data.Bytes[3]; + Data.Bytes[3] = Temp; + + Temp = Data.Bytes[1]; + Data.Bytes[1] = Data.Bytes[2]; + Data.Bytes[2] = Temp; + + return Data.DWord; + } + + /** Function to reverse the byte ordering of the individual bytes in a n byte value. + * + * \ingroup Group_ByteSwapping + * + * \param[in,out] Data Pointer to a number containing an even number of bytes to be reversed. + * \param[in] Length Length of the data in bytes. + * + * \return Input data with the individual bytes reversed. + */ + static inline void SwapEndian_n(void* const Data, + uint8_t Length) ATTR_NON_NULL_PTR_ARG(1); + static inline void SwapEndian_n(void* const Data, + uint8_t Length) + { + uint8_t* CurrDataPos = (uint8_t*)Data; + + while (Length > 1) + { + uint8_t Temp = *CurrDataPos; + *CurrDataPos = *(CurrDataPos + Length - 1); + *(CurrDataPos + Length - 1) = Temp; + + CurrDataPos++; + Length -= 2; + } + } + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + |