diff options
Diffstat (limited to 'protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/Device.h')
| -rw-r--r-- | protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/Device.h | 159 |
1 files changed, 0 insertions, 159 deletions
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/Device.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/Device.h deleted file mode 100644 index 995b9208e8..0000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/Device.h +++ /dev/null @@ -1,159 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Common USB Device definitions for all architectures.
- * \copydetails Group_Device
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB driver
- * dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-/** \ingroup Group_USB
- * \defgroup Group_Device Device Management
- * \brief USB Device management definitions for USB device mode.
- *
- * USB Device mode related definitions common to all architectures. This module contains definitions which
- * are used when the USB controller is initialized in device mode.
- *
- * @{
- */
-
-#ifndef __USBDEVICE_H__
-#define __USBDEVICE_H__
-
- /* Includes: */
- #include "../../../Common/Common.h"
- #include "USBMode.h"
- #include "StdDescriptors.h"
- #include "USBInterrupt.h"
- #include "Endpoint.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Enums: */
- /** Enum for the various states of the USB Device state machine. Only some states are
- * implemented in the LUFA library - other states are left to the user to implement.
- *
- * For information on each possible USB device state, refer to the USB 2.0 specification.
- *
- * \see \ref USB_DeviceState, which stores the current device state machine state.
- */
- enum USB_Device_States_t
- {
- DEVICE_STATE_Unattached = 0, /**< Internally implemented by the library. This state indicates
- * that the device is not currently connected to a host.
- */
- DEVICE_STATE_Powered = 1, /**< Internally implemented by the library. This state indicates
- * that the device is connected to a host, but enumeration has not
- * yet begun.
- */
- DEVICE_STATE_Default = 2, /**< Internally implemented by the library. This state indicates
- * that the device's USB bus has been reset by the host and it is
- * now waiting for the host to begin the enumeration process.
- */
- DEVICE_STATE_Addressed = 3, /**< Internally implemented by the library. This state indicates
- * that the device has been addressed by the USB Host, but is not
- * yet configured.
- */
- DEVICE_STATE_Configured = 4, /**< May be implemented by the user project. This state indicates
- * that the device has been enumerated by the host and is ready
- * for USB communications to begin.
- */
- DEVICE_STATE_Suspended = 5, /**< May be implemented by the user project. This state indicates
- * that the USB bus has been suspended by the host, and the device
- * should power down to a minimal power level until the bus is
- * resumed.
- */
- };
-
- /* Function Prototypes: */
- /** Function to retrieve a given descriptor's size and memory location from the given descriptor type value,
- * index and language ID. This function MUST be overridden in the user application (added with full, identical
- * prototype and name so that the library can call it to retrieve descriptor data.
- *
- * \param[in] wValue The type of the descriptor to retrieve in the upper byte, and the index in the
- * lower byte (when more than one descriptor of the given type exists, such as the
- * case of string descriptors). The type may be one of the standard types defined
- * in the DescriptorTypes_t enum, or may be a class-specific descriptor type value.
- * \param[in] wIndex The language ID of the string to return if the \c wValue type indicates
- * \ref DTYPE_String, otherwise zero for standard descriptors, or as defined in a
- * class-specific standards.
- * \param[out] DescriptorAddress Pointer to the descriptor in memory. This should be set by the routine to
- * the address of the descriptor.
- * \param[out] DescriptorMemorySpace A value from the \ref USB_DescriptorMemorySpaces_t enum to indicate the memory
- * space in which the descriptor is stored. This parameter does not exist when one
- * of the \c USE_*_DESCRIPTORS compile time options is used, or on architectures which
- * use a unified address space.
- *
- * \note By default, the library expects all descriptors to be located in flash memory via the \c PROGMEM attribute.
- * If descriptors should be located in RAM or EEPROM instead (to speed up access in the case of RAM, or to
- * allow the descriptors to be changed dynamically at runtime) either the \c USE_RAM_DESCRIPTORS or the
- * \c USE_EEPROM_DESCRIPTORS tokens may be defined in the project makefile and passed to the compiler by the -D
- * switch.
- *
- * \return Size in bytes of the descriptor if it exists, zero or \ref NO_DESCRIPTOR otherwise.
- */
- uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
- const uint8_t wIndex,
- const void** const DescriptorAddress
- #if (defined(ARCH_HAS_MULTI_ADDRESS_SPACE) || defined(__DOXYGEN__)) && \
- !(defined(USE_FLASH_DESCRIPTORS) || defined(USE_EEPROM_DESCRIPTORS) || defined(USE_RAM_DESCRIPTORS))
- , uint8_t* const DescriptorMemorySpace
- #endif
- ) ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
- /* Architecture Includes: */
- #if (ARCH == ARCH_AVR8)
- #include "AVR8/Device_AVR8.h"
- #elif (ARCH == ARCH_UC3)
- #include "UC3/Device_UC3.h"
- #elif (ARCH == ARCH_XMEGA)
- #include "XMEGA/Device_XMEGA.h"
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
|