diff options
Diffstat (limited to 'protocol/lufa/LUFA-120730/LUFA/Build/lufa_build.mk')
| -rw-r--r-- | protocol/lufa/LUFA-120730/LUFA/Build/lufa_build.mk | 296 |
1 files changed, 0 insertions, 296 deletions
diff --git a/protocol/lufa/LUFA-120730/LUFA/Build/lufa_build.mk b/protocol/lufa/LUFA-120730/LUFA/Build/lufa_build.mk deleted file mode 100644 index 8788606270..0000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Build/lufa_build.mk +++ /dev/null @@ -1,296 +0,0 @@ -#
-# LUFA Library
-# Copyright (C) Dean Camera, 2012.
-#
-# dean [at] fourwalledcubicle [dot] com
-# www.lufa-lib.org
-#
-
-LUFA_BUILD_MODULES += BUILD
-LUFA_BUILD_TARGETS += size check-source symbol-sizes all lib elf hex lss clean mostlyclean
-LUFA_BUILD_MANDATORY_VARS += TARGET ARCH MCU SRC F_USB LUFA_PATH
-LUFA_BUILD_OPTIONAL_VARS += BOARD OPTIMIZATION C_STANDARD CPP_STANDARD F_CPU C_FLAGS CPP_FLAGS ASM_FLAGS CC_FLAGS LD_FLAGS OBJDIR OBJECT_FILES DEBUG_TYPE DEBUG_LEVEL
-LUFA_BUILD_PROVIDED_VARS +=
-LUFA_BUILD_PROVIDED_MACROS +=
-
-# -----------------------------------------------------------------------------
-# LUFA GCC Compiler Buildsystem Makefile Module.
-# -----------------------------------------------------------------------------
-# DESCRIPTION:
-# Provides a set of targets to build a C, C++ and/or Assembly application
-# via the AVR-GCC compiler.
-# -----------------------------------------------------------------------------
-# TARGETS:
-#
-# size - List built application size
-# symbol-sizes - Print application symbols from the binary ELF
-# file as a list sorted by size in bytes
-# check-source - Print a list of SRC source files that cannot
-# be found
-# all - Build application and list size
-# lib - Build and archive source files into a library
-# elf - Build application ELF debug object file
-# hex - Build application HEX object files
-# lss - Build application LSS assembly listing file
-# clean - Remove all project intermediatary and binary
-# output files
-# mostlyclean - Remove intermediatary output files, but
-# preserve binaries
-#
-# MANDATORY PARAMETERS:
-#
-# TARGET - Application name
-# ARCH - Device architecture name
-# MCU - Microcontroller device model name
-# SRC - List of input source files (*.c, *.cpp, *.S)
-# F_USB - Speed of the input clock of the USB controller
-# in Hz
-# LUFA_PATH - Path to the LUFA library core
-#
-# OPTIONAL PARAMETERS:
-#
-# BOARD - LUFA board hardware
-# OPTIMIZATION - Optimization level
-# C_STANDARD - C Language Standard to use
-# CPP_STANDARD - C++ Language Standard to use
-# F_CPU - Speed of the CPU, in Hz
-# C_FLAGS - Flags to pass to the C compiler only
-# CPP_FLAGS - Flags to pass to the C++ compiler only
-# ASM_FLAGS - Flags to pass to the assembler only
-# CC_FLAGS - Common flags to pass to the C/C++ compiler and
-# assembler
-# LD_FLAGS - Flags to pass to the linker
-# OBJDIR - Directory for the output object and dependency
-# files; if equal to ".", the output files will
-# be generated in the same folder as the sources
-# OBJECT_FILES - Extra object files to link in to the binaries
-# DEBUG_FORMAT - Format of the debugging information to
-# generate in the compiled object files
-# DEBUG_LEVEL - Level the debugging information to generate in
-# the compiled object files
-#
-# PROVIDED VARIABLES:
-#
-# (None)
-#
-# PROVIDED MACROS:
-#
-# (None)
-#
-# -----------------------------------------------------------------------------
-
-SHELL = /bin/sh
-
-ERROR_IF_UNSET ?= $(if $(filter undefined, $(origin $(strip $(1)))), $(error Makefile $(strip $(1)) value not set))
-ERROR_IF_EMPTY ?= $(if $(strip $($(strip $(1)))), , $(error Makefile $(strip $(1)) option cannot be blank))
-ERROR_IF_NONBOOL ?= $(if $(filter Y N, $($(strip $(1)))), , $(error Makefile $(strip $(1)) option must be Y or N))
-
-# Default values of optionally user-supplied variables
-BOARD ?= NONE
-OPTIMIZATION ?= s
-F_CPU ?=
-C_STANDARD ?= gnu99
-CPP_STANDARD ?= gnu++98
-C_FLAGS ?=
-CPP_FLAGS ?=
-ASM_FLAGS ?=
-CC_FLAGS ?=
-OBJDIR ?= .
-OBJECT_FILES ?=
-DEBUG_FORMAT ?= dwarf-2
-DEBUG_LEVEL ?= 3
-
-# Sanity check user supplied values
-$(foreach MANDATORY_VAR, $(LUFA_BUILD_MANDATORY_VARS), $(call ERROR_IF_UNSET, $(MANDATORY_VAR)))
-$(call ERROR_IF_EMPTY, MCU)
-$(call ERROR_IF_EMPTY, TARGET)
-$(call ERROR_IF_EMPTY, ARCH)
-$(call ERROR_IF_EMPTY, F_USB)
-$(call ERROR_IF_EMPTY, LUFA_PATH)
-$(call ERROR_IF_EMPTY, BOARD)
-$(call ERROR_IF_EMPTY, OPTIMIZATION)
-$(call ERROR_IF_EMPTY, C_STANDARD)
-$(call ERROR_IF_EMPTY, CPP_STANDARD)
-$(call ERROR_IF_EMPTY, OBJDIR)
-$(call ERROR_IF_EMPTY, DEBUG_FORMAT)
-$(call ERROR_IF_EMPTY, DEBUG_LEVEL)
-
-# Determine the utility prefix to use for the selected architecture
-ifeq ($(ARCH), AVR8)
- CROSS := avr
-else ifeq ($(ARCH), XMEGA)
- CROSS := avr
- $(warning The XMEGA device support is currently EXPERIMENTAL (incomplete and/or non-functional), and is included for preview purposes only.)
-else ifeq ($(ARCH), UC3)
- CROSS := avr32
- $(warning The UC3 device support is currently EXPERIMENTAL (incomplete and/or non-functional), and is included for preview purposes only.)
-else
- $(error Unsupported architecture "$(ARCH)")
-endif
-
-# Output Messages
-MSG_COMPILE_CMD := ' [GCC] :'
-MSG_ASSEMBLE_CMD := ' [GAS] :'
-MSG_NM_CMD := ' [NM] :'
-MSG_REMOVE_CMD := ' [RM] :'
-MSG_LINK_CMD := ' [LNK] :'
-MSG_ARCHIVE_CMD := ' [AR] :'
-MSG_SIZE_CMD := ' [SIZE] :'
-MSG_OBJCPY_CMD := ' [OBJCPY] :'
-MSG_OBJDMP_CMD := ' [OBJDMP] :'
-
-# Convert input source file list to differentiate them by type
-C_SOURCE := $(filter %.c, $(SRC))
-CPP_SOURCE := $(filter %.cpp, $(SRC))
-ASM_SOURCE := $(filter %.S, $(SRC))
-
-# Create a list of unknown source file types, if any are found throw an error
-UNKNOWN_SOURCE := $(filter-out $(C_SOURCE) $(CPP_SOURCE) $(ASM_SOURCE), $(SRC))
-ifneq ($(UNKNOWN_SOURCE),)
- $(error Unknown input source file formats: $(UNKNOWN_SOURCE))
-endif
-
-# Convert input source filenames into a list of required output object files
-OBJECT_FILES += $(addsuffix .o, $(basename $(SRC)))
-ifneq ($(OBJDIR),.)
- $(shell mkdir $(OBJDIR) 2> /dev/null)
- VPATH += $(dir $(SRC))
- OBJECT_FILES := $(addprefix $(patsubst %/,%,$(OBJDIR))/, $(notdir $(OBJECT_FILES)))
-
- # Check if any object file (without path) appears more than once in the object file list
- ifneq ($(words $(sort $(OBJECT_FILES))), $(words $(OBJECT_FILES)))
- $(error Cannot build with OBJDIR parameter set - one or more object file name is not unique)
- endif
-endif
-
-# Create a list of dependency files from the list of object files
-DEPENDENCY_FILES := $(OBJECT_FILES:%.o=%.d)
-
-# Create a list of common flags to pass to the compiler/linker/assembler
-BASE_CC_FLAGS := -pipe -g$(DEBUG_FORMAT) -g$(DEBUG_LEVEL)
-ifeq ($(ARCH), AVR8)
- BASE_CC_FLAGS += -mmcu=$(MCU) -fshort-enums -fno-inline-small-functions -fpack-struct
-else ifeq ($(ARCH), XMEGA)
- BASE_CC_FLAGS += -mmcu=$(MCU) -fshort-enums -fno-inline-small-functions -fpack-struct
-else ifeq ($(ARCH), UC3)
- BASE_CC_FLAGS += -mpart=$(MCU:at32%=%) -masm-addr-pseudos
-endif
-BASE_CC_FLAGS += -Wall -fno-strict-aliasing -funsigned-char -funsigned-bitfields -ffunction-sections
-BASE_CC_FLAGS += -I. -I$(patsubst %/,%,$(LUFA_PATH))/..
-BASE_CC_FLAGS += -DARCH=ARCH_$(ARCH) -DBOARD=BOARD_$(BOARD) -DF_USB=$(F_USB)UL
-ifneq ($(F_CPU),)
- BASE_CC_FLAGS += -DF_CPU=$(F_CPU)UL
-endif
-
-# Additional language specific compiler flags
-BASE_C_FLAGS := -x c -O$(OPTIMIZATION) -std=$(C_STANDARD) -Wstrict-prototypes
-BASE_CPP_FLAGS := -x c++ -O$(OPTIMIZATION) -std=$(CPP_STANDARD)
-BASE_ASM_FLAGS := -x assembler-with-cpp
-
-# Create a list of flags to pass to the linker
-BASE_LD_FLAGS := -lm -Wl,-Map=$(TARGET).map,--cref -Wl,--gc-sections -Wl,--relax
-ifeq ($(ARCH), AVR8)
- BASE_LD_FLAGS += -mmcu=$(MCU)
-else ifeq ($(ARCH), XMEGA)
- BASE_LD_FLAGS += -mmcu=$(MCU)
-else ifeq ($(ARCH), UC3)
- BASE_LD_FLAGS += -mpart=$(MCU:at32%=%) --rodata-writable --direct-data
-endif
-
-# Determine flags to pass to the size utility based on its reported features (only invoke if size target required)
-size: SIZE_MCU_FLAG := $(shell $(CROSS)-size --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
-size: SIZE_FORMAT_FLAG := $(shell $(CROSS)-size --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
-
-
-build_begin:
- @echo ""
- @echo Begin compilation of project \"$(TARGET)\"...
- @echo ""
-
-build_end:
- @echo Finished building project \"$(TARGET)\".
- @echo ""
-
-gcc-version:
- @$(CROSS)-gcc --version
-
-check-source:
- @for f in $(SRC); do \
- if [ ! -f $$f ]; then \
- echo "Error: Source file not found: $$f"; \
- exit 1; \
- fi; \
- done
-
-size: $(TARGET).elf
- @echo $(MSG_SIZE_CMD) Determining size of \"$<\"
- @echo ""
- $(CROSS)-size $(SIZE_MCU_FLAG) $(SIZE_FORMAT_FLAG) $< ; 2>/dev/null;
-
-symbol-sizes: $(TARGET).elf
- @echo $(MSG_NM_CMD) Extracting \"$<\" symbols with decimal byte sizes
- $(CROSS)-nm --size-sort --demangle --radix=d $<
-
-mostlyclean:
- @echo $(MSG_REMOVE_CMD) Removing object files of \"$(TARGET)\"
- rm -f $(OBJECT_FILES)
- @echo $(MSG_REMOVE_CMD) Removing dependency files of \"$(TARGET)\"
- rm -f $(DEPENDENCY_FILES)
-
-clean: mostlyclean
- @echo $(MSG_REMOVE_CMD) Removing output files of \"$(TARGET)\"
- rm -f $(TARGET).elf $(TARGET).hex $(TARGET).eep $(TARGET).map $(TARGET).lss $(TARGET).sym $(TARGET).a
-
-all: build_begin check-source gcc-version elf hex lss sym size build_end
-
-lib: lib$(TARGET).a
-elf: $(TARGET).elf
-hex: $(TARGET).hex $(TARGET).eep
-lss: $(TARGET).lss
-sym: $(TARGET).sym
-
-$(OBJDIR)/%.o: %.c $(MAKEFILE_LIST)
- @echo $(MSG_COMPILE_CMD) Compiling C file \"$(notdir $<)\"
- $(CROSS)-gcc -c $(BASE_CC_FLAGS) $(BASE_C_FLAGS) $(CC_FLAGS) $(C_FLAGS) -MMD -MP -MF $(@:%.o=%.d) $< -o $@
-
-$(OBJDIR)/%.o: %.cpp $(MAKEFILE_LIST)
- @echo $(MSG_COMPILE_CMD) Compiling C++ file \"$(notdir $<)\"
- $(CROSS)-gcc -c $(BASE_CC_FLAGS) $(BASE_CPP_FLAGS) $(CC_FLAGS) $(CPP_FLAGS) -MMD -MP -MF $(@:%.o=%.d) $< -o $@
-
-$(OBJDIR)/%.o: %.S $(MAKEFILE_LIST)
- @echo $(MSG_ASSEMBLE_CMD) Assembling \"$(notdir $<)\"
- $(CROSS)-gcc -c $(BASE_CC_FLAGS) $(BASE_ASM_FLAGS) $(CC_FLAGS) $(ASM_FLAGS) -MMD -MP -MF $(@:%.o=%.d) $< -o $@
-
-.PRECIOUS : $(OBJECT_FILES)
-.SECONDARY : %.a
-%.a: $(OBJECT_FILES)
- @echo $(MSG_ARCHIVE_CMD) Archiving object files into \"$@\"
- $(CROSS)-ar rcs $@ $(OBJECT_FILES)
-
-.PRECIOUS : $(OBJECT_FILES)
-.SECONDARY : %.elf
-%.elf: $(OBJECT_FILES)
- @echo $(MSG_LINK_CMD) Linking object files into \"$@\"
- $(CROSS)-gcc $(BASE_LD_FLAGS) $(LD_FLAGS) $^ -o $@
-
-%.hex: %.elf
- @echo $(MSG_OBJCPY_CMD) Extracting HEX file data from \"$<\"
- $(CROSS)-objcopy -O ihex -R .eeprom -R .fuse -R .lock -R .signature $< $@
-
-%.eep: %.elf
- @echo $(MSG_OBJCPY_CMD) Extracting EEP file data from \"$<\"
- $(CROSS)-objcopy -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O ihex $< $@ || exit 0
-
-%.lss: %.elf
- @echo $(MSG_OBJDMP_CMD) Extracting LSS file data from \"$<\"
- $(CROSS)-objdump -h -S -z $< > $@
-
-%.sym: %.elf
- @echo $(MSG_NM_CMD) Extracting SYM file data from \"$<\"
- $(CROSS)-nm -n $< > $@
-
-# Include build dependency files
--include $(DEPENDENCY_FILES)
-
-# Phony build targets for this module
-.PHONY: build_begin build_end gcc-version check-source size symbol-sizes lib elf hex lss clean mostlyclean
|