summaryrefslogtreecommitdiff
path: root/platforms/chibios
diff options
context:
space:
mode:
Diffstat (limited to 'platforms/chibios')
-rw-r--r--platforms/chibios/_pin_defs.h289
-rw-r--r--platforms/chibios/boards/BLACKPILL_STM32_F401/configs/board.h57
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_F303XC/configs/mcuconf.h3
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_F401XC/board/board.mk9
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_F401XC/configs/board.h77
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_F401XC/configs/config.h22
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_F401XC/configs/mcuconf.h244
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_F405XG/configs/mcuconf.h75
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_F407XE/configs/mcuconf.h75
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_F411XE/board/board.mk9
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_F411XE/configs/board.h20
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_F411XE/configs/config.h22
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_F411XE/configs/mcuconf.h252
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_G431XB/configs/mcuconf.h20
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_G474XE/configs/mcuconf.h22
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_L412XB/configs/board.h5
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_L412XB/configs/config.h2
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_L412XB/configs/mcuconf.h60
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_L432XC/configs/config.h3
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_L432XC/configs/mcuconf.h14
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_L433XC/configs/config.h2
-rw-r--r--platforms/chibios/boards/QMK_PROTON_C/configs/chconf.h69
-rw-r--r--platforms/chibios/boards/QMK_PROTON_C/configs/halconf.h31
-rw-r--r--platforms/chibios/boards/QMK_PROTON_C/configs/mcuconf.h3
-rw-r--r--platforms/chibios/boards/common/configs/chconf.h69
-rw-r--r--platforms/chibios/boards/common/configs/halconf.h31
-rw-r--r--platforms/chibios/boards/common/ld/STM32F401xC_tinyuf2.ld (renamed from platforms/chibios/boards/BLACKPILL_STM32_F401/ld/STM32F401xC_tinyuf2.ld)0
-rw-r--r--platforms/chibios/boards/common/ld/STM32F401xE_tinyuf2.ld (renamed from platforms/chibios/boards/BLACKPILL_STM32_F401/ld/STM32F401xE_tinyuf2.ld)0
-rw-r--r--platforms/chibios/boards/common/ld/STM32F411xC_tinyuf2.ld (renamed from platforms/chibios/boards/BLACKPILL_STM32_F411/ld/STM32F411xC_tinyuf2.ld)0
-rw-r--r--platforms/chibios/boards/common/ld/STM32F411xE_tinyuf2.ld (renamed from platforms/chibios/boards/BLACKPILL_STM32_F411/ld/STM32F411xE_tinyuf2.ld)0
-rw-r--r--platforms/chibios/converters/promicro_to_proton_c/_pin_defs.h41
-rw-r--r--platforms/chibios/converters/promicro_to_proton_c/converter.mk (renamed from platforms/chibios/boards/QMK_PROTON_C/convert_to_proton_c.mk)2
-rw-r--r--platforms/chibios/drivers/ws2812_spi.c28
-rw-r--r--platforms/chibios/eeprom_stm32_defs.h4
-rw-r--r--platforms/chibios/flash.mk14
-rw-r--r--platforms/chibios/gpio.h9
-rw-r--r--platforms/chibios/hardware_id.c15
-rw-r--r--platforms/chibios/pin_defs.h323
-rw-r--r--platforms/chibios/platform.mk10
-rw-r--r--platforms/chibios/timer.c2
-rw-r--r--platforms/chibios/wait.c2
41 files changed, 1430 insertions, 505 deletions
diff --git a/platforms/chibios/_pin_defs.h b/platforms/chibios/_pin_defs.h
new file mode 100644
index 0000000000..0d96e2fc3b
--- /dev/null
+++ b/platforms/chibios/_pin_defs.h
@@ -0,0 +1,289 @@
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#if defined(MCU_KINETIS)
+// TODO: including this avoids "error: expected identifier before '(' token" errors
+// here just to please KINETIS builds...
+# include <hal.h>
+#endif
+
+#define A0 PAL_LINE(GPIOA, 0)
+#define A1 PAL_LINE(GPIOA, 1)
+#define A2 PAL_LINE(GPIOA, 2)
+#define A3 PAL_LINE(GPIOA, 3)
+#define A4 PAL_LINE(GPIOA, 4)
+#define A5 PAL_LINE(GPIOA, 5)
+#define A6 PAL_LINE(GPIOA, 6)
+#define A7 PAL_LINE(GPIOA, 7)
+#define A8 PAL_LINE(GPIOA, 8)
+#define A9 PAL_LINE(GPIOA, 9)
+#define A10 PAL_LINE(GPIOA, 10)
+#define A11 PAL_LINE(GPIOA, 11)
+#define A12 PAL_LINE(GPIOA, 12)
+#define A13 PAL_LINE(GPIOA, 13)
+#define A14 PAL_LINE(GPIOA, 14)
+#define A15 PAL_LINE(GPIOA, 15)
+#define A16 PAL_LINE(GPIOA, 16)
+#define A17 PAL_LINE(GPIOA, 17)
+#define A18 PAL_LINE(GPIOA, 18)
+#define A19 PAL_LINE(GPIOA, 19)
+#define A20 PAL_LINE(GPIOA, 20)
+#define A21 PAL_LINE(GPIOA, 21)
+#define A22 PAL_LINE(GPIOA, 22)
+#define A23 PAL_LINE(GPIOA, 23)
+#define A24 PAL_LINE(GPIOA, 24)
+#define A25 PAL_LINE(GPIOA, 25)
+#define A26 PAL_LINE(GPIOA, 26)
+#define A27 PAL_LINE(GPIOA, 27)
+#define A28 PAL_LINE(GPIOA, 28)
+#define A29 PAL_LINE(GPIOA, 29)
+#define A30 PAL_LINE(GPIOA, 30)
+#define A31 PAL_LINE(GPIOA, 31)
+#define A32 PAL_LINE(GPIOA, 32)
+#define B0 PAL_LINE(GPIOB, 0)
+#define B1 PAL_LINE(GPIOB, 1)
+#define B2 PAL_LINE(GPIOB, 2)
+#define B3 PAL_LINE(GPIOB, 3)
+#define B4 PAL_LINE(GPIOB, 4)
+#define B5 PAL_LINE(GPIOB, 5)
+#define B6 PAL_LINE(GPIOB, 6)
+#define B7 PAL_LINE(GPIOB, 7)
+#define B8 PAL_LINE(GPIOB, 8)
+#define B9 PAL_LINE(GPIOB, 9)
+#define B10 PAL_LINE(GPIOB, 10)
+#define B11 PAL_LINE(GPIOB, 11)
+#define B12 PAL_LINE(GPIOB, 12)
+#define B13 PAL_LINE(GPIOB, 13)
+#define B14 PAL_LINE(GPIOB, 14)
+#define B15 PAL_LINE(GPIOB, 15)
+#define B16 PAL_LINE(GPIOB, 16)
+#define B17 PAL_LINE(GPIOB, 17)
+#define B18 PAL_LINE(GPIOB, 18)
+#define B19 PAL_LINE(GPIOB, 19)
+#define B20 PAL_LINE(GPIOB, 20)
+#define B21 PAL_LINE(GPIOB, 21)
+#define B22 PAL_LINE(GPIOB, 22)
+#define B23 PAL_LINE(GPIOB, 23)
+#define B24 PAL_LINE(GPIOB, 24)
+#define B25 PAL_LINE(GPIOB, 25)
+#define B26 PAL_LINE(GPIOB, 26)
+#define B27 PAL_LINE(GPIOB, 27)
+#define B28 PAL_LINE(GPIOB, 28)
+#define B29 PAL_LINE(GPIOB, 29)
+#define B30 PAL_LINE(GPIOB, 30)
+#define B31 PAL_LINE(GPIOB, 31)
+#define B32 PAL_LINE(GPIOB, 32)
+#define C0 PAL_LINE(GPIOC, 0)
+#define C1 PAL_LINE(GPIOC, 1)
+#define C2 PAL_LINE(GPIOC, 2)
+#define C3 PAL_LINE(GPIOC, 3)
+#define C4 PAL_LINE(GPIOC, 4)
+#define C5 PAL_LINE(GPIOC, 5)
+#define C6 PAL_LINE(GPIOC, 6)
+#define C7 PAL_LINE(GPIOC, 7)
+#define C8 PAL_LINE(GPIOC, 8)
+#define C9 PAL_LINE(GPIOC, 9)
+#define C10 PAL_LINE(GPIOC, 10)
+#define C11 PAL_LINE(GPIOC, 11)
+#define C12 PAL_LINE(GPIOC, 12)
+#define C13 PAL_LINE(GPIOC, 13)
+#define C14 PAL_LINE(GPIOC, 14)
+#define C15 PAL_LINE(GPIOC, 15)
+#define C16 PAL_LINE(GPIOC, 16)
+#define C17 PAL_LINE(GPIOC, 17)
+#define C18 PAL_LINE(GPIOC, 18)
+#define C19 PAL_LINE(GPIOC, 19)
+#define C20 PAL_LINE(GPIOC, 20)
+#define C21 PAL_LINE(GPIOC, 21)
+#define C22 PAL_LINE(GPIOC, 22)
+#define C23 PAL_LINE(GPIOC, 23)
+#define C24 PAL_LINE(GPIOC, 24)
+#define C25 PAL_LINE(GPIOC, 25)
+#define C26 PAL_LINE(GPIOC, 26)
+#define C27 PAL_LINE(GPIOC, 27)
+#define C28 PAL_LINE(GPIOC, 28)
+#define C29 PAL_LINE(GPIOC, 29)
+#define C30 PAL_LINE(GPIOC, 30)
+#define C31 PAL_LINE(GPIOC, 31)
+#define C32 PAL_LINE(GPIOC, 32)
+#define D0 PAL_LINE(GPIOD, 0)
+#define D1 PAL_LINE(GPIOD, 1)
+#define D2 PAL_LINE(GPIOD, 2)
+#define D3 PAL_LINE(GPIOD, 3)
+#define D4 PAL_LINE(GPIOD, 4)
+#define D5 PAL_LINE(GPIOD, 5)
+#define D6 PAL_LINE(GPIOD, 6)
+#define D7 PAL_LINE(GPIOD, 7)
+#define D8 PAL_LINE(GPIOD, 8)
+#define D9 PAL_LINE(GPIOD, 9)
+#define D10 PAL_LINE(GPIOD, 10)
+#define D11 PAL_LINE(GPIOD, 11)
+#define D12 PAL_LINE(GPIOD, 12)
+#define D13 PAL_LINE(GPIOD, 13)
+#define D14 PAL_LINE(GPIOD, 14)
+#define D15 PAL_LINE(GPIOD, 15)
+#define D16 PAL_LINE(GPIOD, 16)
+#define D17 PAL_LINE(GPIOD, 17)
+#define D18 PAL_LINE(GPIOD, 18)
+#define D19 PAL_LINE(GPIOD, 19)
+#define D20 PAL_LINE(GPIOD, 20)
+#define D21 PAL_LINE(GPIOD, 21)
+#define D22 PAL_LINE(GPIOD, 22)
+#define D23 PAL_LINE(GPIOD, 23)
+#define D24 PAL_LINE(GPIOD, 24)
+#define D25 PAL_LINE(GPIOD, 25)
+#define D26 PAL_LINE(GPIOD, 26)
+#define D27 PAL_LINE(GPIOD, 27)
+#define D28 PAL_LINE(GPIOD, 28)
+#define D29 PAL_LINE(GPIOD, 29)
+#define D30 PAL_LINE(GPIOD, 30)
+#define D31 PAL_LINE(GPIOD, 31)
+#define D32 PAL_LINE(GPIOD, 32)
+#define E0 PAL_LINE(GPIOE, 0)
+#define E1 PAL_LINE(GPIOE, 1)
+#define E2 PAL_LINE(GPIOE, 2)
+#define E3 PAL_LINE(GPIOE, 3)
+#define E4 PAL_LINE(GPIOE, 4)
+#define E5 PAL_LINE(GPIOE, 5)
+#define E6 PAL_LINE(GPIOE, 6)
+#define E7 PAL_LINE(GPIOE, 7)
+#define E8 PAL_LINE(GPIOE, 8)
+#define E9 PAL_LINE(GPIOE, 9)
+#define E10 PAL_LINE(GPIOE, 10)
+#define E11 PAL_LINE(GPIOE, 11)
+#define E12 PAL_LINE(GPIOE, 12)
+#define E13 PAL_LINE(GPIOE, 13)
+#define E14 PAL_LINE(GPIOE, 14)
+#define E15 PAL_LINE(GPIOE, 15)
+#define E16 PAL_LINE(GPIOE, 16)
+#define E17 PAL_LINE(GPIOE, 17)
+#define E18 PAL_LINE(GPIOE, 18)
+#define E19 PAL_LINE(GPIOE, 19)
+#define E20 PAL_LINE(GPIOE, 20)
+#define E21 PAL_LINE(GPIOE, 21)
+#define E22 PAL_LINE(GPIOE, 22)
+#define E23 PAL_LINE(GPIOE, 23)
+#define E24 PAL_LINE(GPIOE, 24)
+#define E25 PAL_LINE(GPIOE, 25)
+#define E26 PAL_LINE(GPIOE, 26)
+#define E27 PAL_LINE(GPIOE, 27)
+#define E28 PAL_LINE(GPIOE, 28)
+#define E29 PAL_LINE(GPIOE, 29)
+#define E30 PAL_LINE(GPIOE, 30)
+#define E31 PAL_LINE(GPIOE, 31)
+#define E32 PAL_LINE(GPIOE, 32)
+#define F0 PAL_LINE(GPIOF, 0)
+#define F1 PAL_LINE(GPIOF, 1)
+#define F2 PAL_LINE(GPIOF, 2)
+#define F3 PAL_LINE(GPIOF, 3)
+#define F4 PAL_LINE(GPIOF, 4)
+#define F5 PAL_LINE(GPIOF, 5)
+#define F6 PAL_LINE(GPIOF, 6)
+#define F7 PAL_LINE(GPIOF, 7)
+#define F8 PAL_LINE(GPIOF, 8)
+#define F9 PAL_LINE(GPIOF, 9)
+#define F10 PAL_LINE(GPIOF, 10)
+#define F11 PAL_LINE(GPIOF, 11)
+#define F12 PAL_LINE(GPIOF, 12)
+#define F13 PAL_LINE(GPIOF, 13)
+#define F14 PAL_LINE(GPIOF, 14)
+#define F15 PAL_LINE(GPIOF, 15)
+#define G0 PAL_LINE(GPIOG, 0)
+#define G1 PAL_LINE(GPIOG, 1)
+#define G2 PAL_LINE(GPIOG, 2)
+#define G3 PAL_LINE(GPIOG, 3)
+#define G4 PAL_LINE(GPIOG, 4)
+#define G5 PAL_LINE(GPIOG, 5)
+#define G6 PAL_LINE(GPIOG, 6)
+#define G7 PAL_LINE(GPIOG, 7)
+#define G8 PAL_LINE(GPIOG, 8)
+#define G9 PAL_LINE(GPIOG, 9)
+#define G10 PAL_LINE(GPIOG, 10)
+#define G11 PAL_LINE(GPIOG, 11)
+#define G12 PAL_LINE(GPIOG, 12)
+#define G13 PAL_LINE(GPIOG, 13)
+#define G14 PAL_LINE(GPIOG, 14)
+#define G15 PAL_LINE(GPIOG, 15)
+#define H0 PAL_LINE(GPIOH, 0)
+#define H1 PAL_LINE(GPIOH, 1)
+#define H2 PAL_LINE(GPIOH, 2)
+#define H3 PAL_LINE(GPIOH, 3)
+#define H4 PAL_LINE(GPIOH, 4)
+#define H5 PAL_LINE(GPIOH, 5)
+#define H6 PAL_LINE(GPIOH, 6)
+#define H7 PAL_LINE(GPIOH, 7)
+#define H8 PAL_LINE(GPIOH, 8)
+#define H9 PAL_LINE(GPIOH, 9)
+#define H10 PAL_LINE(GPIOH, 10)
+#define H11 PAL_LINE(GPIOH, 11)
+#define H12 PAL_LINE(GPIOH, 12)
+#define H13 PAL_LINE(GPIOH, 13)
+#define H14 PAL_LINE(GPIOH, 14)
+#define H15 PAL_LINE(GPIOH, 15)
+#define I0 PAL_LINE(GPIOI, 0)
+#define I1 PAL_LINE(GPIOI, 1)
+#define I2 PAL_LINE(GPIOI, 2)
+#define I3 PAL_LINE(GPIOI, 3)
+#define I4 PAL_LINE(GPIOI, 4)
+#define I5 PAL_LINE(GPIOI, 5)
+#define I6 PAL_LINE(GPIOI, 6)
+#define I7 PAL_LINE(GPIOI, 7)
+#define I8 PAL_LINE(GPIOI, 8)
+#define I9 PAL_LINE(GPIOI, 9)
+#define I10 PAL_LINE(GPIOI, 10)
+#define I11 PAL_LINE(GPIOI, 11)
+#define I12 PAL_LINE(GPIOI, 12)
+#define I13 PAL_LINE(GPIOI, 13)
+#define I14 PAL_LINE(GPIOI, 14)
+#define I15 PAL_LINE(GPIOI, 15)
+#define J0 PAL_LINE(GPIOJ, 0)
+#define J1 PAL_LINE(GPIOJ, 1)
+#define J2 PAL_LINE(GPIOJ, 2)
+#define J3 PAL_LINE(GPIOJ, 3)
+#define J4 PAL_LINE(GPIOJ, 4)
+#define J5 PAL_LINE(GPIOJ, 5)
+#define J6 PAL_LINE(GPIOJ, 6)
+#define J7 PAL_LINE(GPIOJ, 7)
+#define J8 PAL_LINE(GPIOJ, 8)
+#define J9 PAL_LINE(GPIOJ, 9)
+#define J10 PAL_LINE(GPIOJ, 10)
+#define J11 PAL_LINE(GPIOJ, 11)
+#define J12 PAL_LINE(GPIOJ, 12)
+#define J13 PAL_LINE(GPIOJ, 13)
+#define J14 PAL_LINE(GPIOJ, 14)
+#define J15 PAL_LINE(GPIOJ, 15)
+// Keyboards can `#define KEYBOARD_REQUIRES_GPIOK` if they need to access GPIO-K pins. These conflict with a whole
+// bunch of layout definitions, so it's intentionally left out unless absolutely required -- in that case, the
+// keyboard designer should use a different symbol when defining their layout macros.
+#ifdef KEYBOARD_REQUIRES_GPIOK
+# define K0 PAL_LINE(GPIOK, 0)
+# define K1 PAL_LINE(GPIOK, 1)
+# define K2 PAL_LINE(GPIOK, 2)
+# define K3 PAL_LINE(GPIOK, 3)
+# define K4 PAL_LINE(GPIOK, 4)
+# define K5 PAL_LINE(GPIOK, 5)
+# define K6 PAL_LINE(GPIOK, 6)
+# define K7 PAL_LINE(GPIOK, 7)
+# define K8 PAL_LINE(GPIOK, 8)
+# define K9 PAL_LINE(GPIOK, 9)
+# define K10 PAL_LINE(GPIOK, 10)
+# define K11 PAL_LINE(GPIOK, 11)
+# define K12 PAL_LINE(GPIOK, 12)
+# define K13 PAL_LINE(GPIOK, 13)
+# define K14 PAL_LINE(GPIOK, 14)
+# define K15 PAL_LINE(GPIOK, 15)
+#endif
diff --git a/platforms/chibios/boards/BLACKPILL_STM32_F401/configs/board.h b/platforms/chibios/boards/BLACKPILL_STM32_F401/configs/board.h
index 30af6b0c86..78dcbac05c 100644
--- a/platforms/chibios/boards/BLACKPILL_STM32_F401/configs/board.h
+++ b/platforms/chibios/boards/BLACKPILL_STM32_F401/configs/board.h
@@ -17,4 +17,61 @@
#include_next "board.h"
+// Force B9 as input to align with qmk defaults
+#undef VAL_GPIOB_MODER
+#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \
+ PIN_MODE_INPUT(GPIOB_PIN1) | \
+ PIN_MODE_INPUT(GPIOB_PIN2) | \
+ PIN_MODE_ALTERNATE(GPIOB_SWO) | \
+ PIN_MODE_INPUT(GPIOB_PIN4) | \
+ PIN_MODE_INPUT(GPIOB_PIN5) | \
+ PIN_MODE_INPUT(GPIOB_LSM303DLHC_SCL) | \
+ PIN_MODE_INPUT(GPIOB_PIN7) | \
+ PIN_MODE_INPUT(GPIOB_PIN8) | \
+ PIN_MODE_INPUT(GPIOB_LSM303DLHC_SDA) | \
+ PIN_MODE_ALTERNATE(GPIOB_MP45DT02_CLK_IN) |\
+ PIN_MODE_INPUT(GPIOB_PIN11) | \
+ PIN_MODE_INPUT(GPIOB_PIN12) | \
+ PIN_MODE_INPUT(GPIOB_PIN13) | \
+ PIN_MODE_INPUT(GPIOB_PIN14) | \
+ PIN_MODE_INPUT(GPIOB_PIN15))
+
+#undef VAL_GPIOB_PUPDR
+#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN1) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN2) | \
+ PIN_PUPDR_PULLUP(GPIOB_SWO) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN4) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN5) | \
+ PIN_PUPDR_PULLUP(GPIOB_LSM303DLHC_SCL) |\
+ PIN_PUPDR_PULLUP(GPIOB_PIN7) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN8) | \
+ PIN_PUPDR_PULLUP(GPIOB_LSM303DLHC_SDA) |\
+ PIN_PUPDR_FLOATING(GPIOB_MP45DT02_CLK_IN) |\
+ PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN12) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN13) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN14) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN15))
+
+#undef VAL_GPIOB_AFRL
+#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | \
+ PIN_AFIO_AF(GPIOB_PIN1, 0U) | \
+ PIN_AFIO_AF(GPIOB_PIN2, 0U) | \
+ PIN_AFIO_AF(GPIOB_SWO, 0U) | \
+ PIN_AFIO_AF(GPIOB_PIN4, 0U) | \
+ PIN_AFIO_AF(GPIOB_PIN5, 0U) | \
+ PIN_AFIO_AF(GPIOB_LSM303DLHC_SCL, 0) | \
+ PIN_AFIO_AF(GPIOB_PIN7, 0U))
+
+#undef VAL_GPIOB_AFRH
+#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | \
+ PIN_AFIO_AF(GPIOB_LSM303DLHC_SDA, 0) | \
+ PIN_AFIO_AF(GPIOB_MP45DT02_CLK_IN, 5U) |\
+ PIN_AFIO_AF(GPIOB_PIN11, 0U) | \
+ PIN_AFIO_AF(GPIOB_PIN12, 0U) | \
+ PIN_AFIO_AF(GPIOB_PIN13, 0U) | \
+ PIN_AFIO_AF(GPIOB_PIN14, 0U) | \
+ PIN_AFIO_AF(GPIOB_PIN15, 0U))
+
#undef STM32_HSE_BYPASS
diff --git a/platforms/chibios/boards/GENERIC_STM32_F303XC/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_F303XC/configs/mcuconf.h
index c6f5a8ac52..e0af4a276b 100644
--- a/platforms/chibios/boards/GENERIC_STM32_F303XC/configs/mcuconf.h
+++ b/platforms/chibios/boards/GENERIC_STM32_F303XC/configs/mcuconf.h
@@ -1,5 +1,5 @@
/*
- ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -186,7 +186,6 @@
/*
* PWM driver system settings.
*/
-#define STM32_PWM_USE_ADVANCED FALSE
#define STM32_PWM_USE_TIM1 FALSE
#define STM32_PWM_USE_TIM2 FALSE
#define STM32_PWM_USE_TIM3 FALSE
diff --git a/platforms/chibios/boards/GENERIC_STM32_F401XC/board/board.mk b/platforms/chibios/boards/GENERIC_STM32_F401XC/board/board.mk
new file mode 100644
index 0000000000..fddf7dace4
--- /dev/null
+++ b/platforms/chibios/boards/GENERIC_STM32_F401XC/board/board.mk
@@ -0,0 +1,9 @@
+# List of all the board related files.
+BOARDSRC = $(CHIBIOS)/os/hal/boards/ST_STM32F401C_DISCOVERY/board.c
+
+# Required include directories
+BOARDINC = $(CHIBIOS)/os/hal/boards/ST_STM32F401C_DISCOVERY
+
+# Shared variables
+ALLCSRC += $(BOARDSRC)
+ALLINC += $(BOARDINC)
diff --git a/platforms/chibios/boards/GENERIC_STM32_F401XC/configs/board.h b/platforms/chibios/boards/GENERIC_STM32_F401XC/configs/board.h
new file mode 100644
index 0000000000..78dcbac05c
--- /dev/null
+++ b/platforms/chibios/boards/GENERIC_STM32_F401XC/configs/board.h
@@ -0,0 +1,77 @@
+/* Copyright 2020 Nick Brassel (tzarc)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <https://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include_next "board.h"
+
+// Force B9 as input to align with qmk defaults
+#undef VAL_GPIOB_MODER
+#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \
+ PIN_MODE_INPUT(GPIOB_PIN1) | \
+ PIN_MODE_INPUT(GPIOB_PIN2) | \
+ PIN_MODE_ALTERNATE(GPIOB_SWO) | \
+ PIN_MODE_INPUT(GPIOB_PIN4) | \
+ PIN_MODE_INPUT(GPIOB_PIN5) | \
+ PIN_MODE_INPUT(GPIOB_LSM303DLHC_SCL) | \
+ PIN_MODE_INPUT(GPIOB_PIN7) | \
+ PIN_MODE_INPUT(GPIOB_PIN8) | \
+ PIN_MODE_INPUT(GPIOB_LSM303DLHC_SDA) | \
+ PIN_MODE_ALTERNATE(GPIOB_MP45DT02_CLK_IN) |\
+ PIN_MODE_INPUT(GPIOB_PIN11) | \
+ PIN_MODE_INPUT(GPIOB_PIN12) | \
+ PIN_MODE_INPUT(GPIOB_PIN13) | \
+ PIN_MODE_INPUT(GPIOB_PIN14) | \
+ PIN_MODE_INPUT(GPIOB_PIN15))
+
+#undef VAL_GPIOB_PUPDR
+#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN1) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN2) | \
+ PIN_PUPDR_PULLUP(GPIOB_SWO) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN4) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN5) | \
+ PIN_PUPDR_PULLUP(GPIOB_LSM303DLHC_SCL) |\
+ PIN_PUPDR_PULLUP(GPIOB_PIN7) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN8) | \
+ PIN_PUPDR_PULLUP(GPIOB_LSM303DLHC_SDA) |\
+ PIN_PUPDR_FLOATING(GPIOB_MP45DT02_CLK_IN) |\
+ PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN12) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN13) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN14) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN15))
+
+#undef VAL_GPIOB_AFRL
+#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | \
+ PIN_AFIO_AF(GPIOB_PIN1, 0U) | \
+ PIN_AFIO_AF(GPIOB_PIN2, 0U) | \
+ PIN_AFIO_AF(GPIOB_SWO, 0U) | \
+ PIN_AFIO_AF(GPIOB_PIN4, 0U) | \
+ PIN_AFIO_AF(GPIOB_PIN5, 0U) | \
+ PIN_AFIO_AF(GPIOB_LSM303DLHC_SCL, 0) | \
+ PIN_AFIO_AF(GPIOB_PIN7, 0U))
+
+#undef VAL_GPIOB_AFRH
+#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | \
+ PIN_AFIO_AF(GPIOB_LSM303DLHC_SDA, 0) | \
+ PIN_AFIO_AF(GPIOB_MP45DT02_CLK_IN, 5U) |\
+ PIN_AFIO_AF(GPIOB_PIN11, 0U) | \
+ PIN_AFIO_AF(GPIOB_PIN12, 0U) | \
+ PIN_AFIO_AF(GPIOB_PIN13, 0U) | \
+ PIN_AFIO_AF(GPIOB_PIN14, 0U) | \
+ PIN_AFIO_AF(GPIOB_PIN15, 0U))
+
+#undef STM32_HSE_BYPASS
diff --git a/platforms/chibios/boards/GENERIC_STM32_F401XC/configs/config.h b/platforms/chibios/boards/GENERIC_STM32_F401XC/configs/config.h
new file mode 100644
index 0000000000..e06ca0b725
--- /dev/null
+++ b/platforms/chibios/boards/GENERIC_STM32_F401XC/configs/config.h
@@ -0,0 +1,22 @@
+/* Copyright 2020 Nick Brassel (tzarc)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <https://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#define BOARD_OTG_NOVBUSSENS 1
+
+#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP
+# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
+#endif
diff --git a/platforms/chibios/boards/GENERIC_STM32_F401XC/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_F401XC/configs/mcuconf.h
new file mode 100644
index 0000000000..24cec7137d
--- /dev/null
+++ b/platforms/chibios/boards/GENERIC_STM32_F401XC/configs/mcuconf.h
@@ -0,0 +1,244 @@
+/*
+ ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef MCUCONF_H
+#define MCUCONF_H
+
+/*
+ * STM32F4xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0 Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3 Lowest...Highest.
+ */
+
+#define STM32F4xx_MCUCONF
+#define STM32F401_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT FALSE
+#define STM32_PVD_ENABLE FALSE
+#define STM32_PLS STM32_PLS_LEV0
+#define STM32_BKPRAM_ENABLE FALSE
+#define STM32_HSI_ENABLED TRUE
+#define STM32_LSI_ENABLED TRUE
+#define STM32_HSE_ENABLED TRUE
+#define STM32_LSE_ENABLED FALSE
+#define STM32_CLOCK48_REQUIRED TRUE
+#define STM32_SW STM32_SW_PLL
+#define STM32_PLLSRC STM32_PLLSRC_HSE
+#define STM32_PLLM_VALUE 4
+#define STM32_PLLN_VALUE 168
+#define STM32_PLLP_VALUE 4
+#define STM32_PLLQ_VALUE 7
+#define STM32_HPRE STM32_HPRE_DIV1
+#define STM32_PPRE1 STM32_PPRE1_DIV2
+#define STM32_PPRE2 STM32_PPRE2_DIV1
+#define STM32_RTCSEL STM32_RTCSEL_LSI
+#define STM32_RTCPRE_VALUE 8
+#define STM32_MCO1SEL STM32_MCO1SEL_HSI
+#define STM32_MCO1PRE STM32_MCO1PRE_DIV1
+#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK
+#define STM32_MCO2PRE STM32_MCO2PRE_DIV5
+#define STM32_I2SSRC STM32_I2SSRC_CKIN
+#define STM32_PLLI2SN_VALUE 192
+#define STM32_PLLI2SR_VALUE 5
+
+/*
+ * IRQ system settings.
+ */
+#define STM32_IRQ_EXTI0_PRIORITY 6
+#define STM32_IRQ_EXTI1_PRIORITY 6
+#define STM32_IRQ_EXTI2_PRIORITY 6
+#define STM32_IRQ_EXTI3_PRIORITY 6
+#define STM32_IRQ_EXTI4_PRIORITY 6
+#define STM32_IRQ_EXTI5_9_PRIORITY 6
+#define STM32_IRQ_EXTI10_15_PRIORITY 6
+#define STM32_IRQ_EXTI16_PRIORITY 6
+#define STM32_IRQ_EXTI17_PRIORITY 15
+#define STM32_IRQ_EXTI18_PRIORITY 6
+#define STM32_IRQ_EXTI19_PRIORITY 6
+#define STM32_IRQ_EXTI20_PRIORITY 6
+#define STM32_IRQ_EXTI21_PRIORITY 15
+#define STM32_IRQ_EXTI22_PRIORITY 15
+
+#define STM32_IRQ_TIM1_BRK_TIM9_PRIORITY 7
+#define STM32_IRQ_TIM1_UP_TIM10_PRIORITY 7
+#define STM32_IRQ_TIM1_TRGCO_TIM11_PRIORITY 7
+#define STM32_IRQ_TIM1_CC_PRIORITY 7
+#define STM32_IRQ_TIM2_PRIORITY 7
+#define STM32_IRQ_TIM3_PRIORITY 7
+#define STM32_IRQ_TIM4_PRIORITY 7
+#define STM32_IRQ_TIM5_PRIORITY 7
+
+#define STM32_IRQ_USART1_PRIORITY 12
+#define STM32_IRQ_USART2_PRIORITY 12
+#define STM32_IRQ_USART6_PRIORITY 12
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4
+#define STM32_ADC_USE_ADC1 FALSE
+#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4)
+#define STM32_ADC_ADC1_DMA_PRIORITY 2
+#define STM32_ADC_IRQ_PRIORITY 6
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1 FALSE
+#define STM32_GPT_USE_TIM2 FALSE
+#define STM32_GPT_USE_TIM3 FALSE
+#define STM32_GPT_USE_TIM4 FALSE
+#define STM32_GPT_USE_TIM5 FALSE
+#define STM32_GPT_USE_TIM9 FALSE
+#define STM32_GPT_USE_TIM10 FALSE
+#define STM32_GPT_USE_TIM11 FALSE
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1 FALSE
+#define STM32_I2C_USE_I2C2 FALSE
+#define STM32_I2C_USE_I2C3 FALSE
+#define STM32_I2C_BUSY_TIMEOUT 50
+#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2C_I2C1_IRQ_PRIORITY 5
+#define STM32_I2C_I2C2_IRQ_PRIORITY 5
+#define STM32_I2C_I2C3_IRQ_PRIORITY 5
+#define STM32_I2C_I2C1_DMA_PRIORITY 3
+#define STM32_I2C_I2C2_DMA_PRIORITY 3
+#define STM32_I2C_I2C3_DMA_PRIORITY 3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
+
+/*
+ * I2S driver system settings.
+ */
+#define STM32_I2S_USE_SPI2 FALSE
+#define STM32_I2S_USE_SPI3 FALSE
+#define STM32_I2S_SPI2_IRQ_PRIORITY 10
+#define STM32_I2S_SPI3_IRQ_PRIORITY 10
+#define STM32_I2S_SPI2_DMA_PRIORITY 1
+#define STM32_I2S_SPI3_DMA_PRIORITY 1
+#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1 FALSE
+#define STM32_ICU_USE_TIM2 FALSE
+#define STM32_ICU_USE_TIM3 FALSE
+#define STM32_ICU_USE_TIM4 FALSE
+#define STM32_ICU_USE_TIM5 FALSE
+#define STM32_ICU_USE_TIM9 FALSE
+#define STM32_ICU_USE_TIM10 FALSE
+#define STM32_ICU_USE_TIM11 FALSE
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_TIM1 FALSE
+#define STM32_PWM_USE_TIM2 FALSE
+#define STM32_PWM_USE_TIM3 FALSE
+#define STM32_PWM_USE_TIM4 FALSE
+#define STM32_PWM_USE_TIM5 FALSE
+#define STM32_PWM_USE_TIM9 FALSE
+#define STM32_PWM_USE_TIM10 FALSE
+#define STM32_PWM_USE_TIM11 FALSE
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1 FALSE
+#define STM32_SERIAL_USE_USART2 FALSE
+#define STM32_SERIAL_USE_USART6 FALSE
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1 FALSE
+#define STM32_SPI_USE_SPI2 FALSE
+#define STM32_SPI_USE_SPI3 FALSE
+#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0)
+#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3)
+#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#define STM32_SPI_SPI1_DMA_PRIORITY 1
+#define STM32_SPI_SPI2_DMA_PRIORITY 1
+#define STM32_SPI_SPI3_DMA_PRIORITY 1
+#define STM32_SPI_SPI1_IRQ_PRIORITY 10
+#define STM32_SPI_SPI2_IRQ_PRIORITY 10
+#define STM32_SPI_SPI3_IRQ_PRIORITY 10
+#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY 8
+#define STM32_ST_USE_TIMER 2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1 FALSE
+#define STM32_UART_USE_USART2 FALSE
+#define STM32_UART_USE_USART6 FALSE
+#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
+#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
+#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
+#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART1_DMA_PRIORITY 0
+#define STM32_UART_USART2_DMA_PRIORITY 0
+#define STM32_UART_USART6_DMA_PRIORITY 0
+#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_OTG1 TRUE
+#define STM32_USB_OTG1_IRQ_PRIORITY 14
+#define STM32_USB_OTG1_RX_FIFO_SIZE 512
+#define STM32_USB_HOST_WAKEUP_DURATION 2
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG FALSE
+
+#endif /* MCUCONF_H */
diff --git a/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/mcuconf.h
index 908a580a91..394e750256 100644
--- a/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/mcuconf.h
+++ b/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/mcuconf.h
@@ -1,5 +1,5 @@
/*
- ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -86,6 +86,28 @@
#define STM32_IRQ_EXTI21_PRIORITY 15
#define STM32_IRQ_EXTI22_PRIORITY 15
+#define STM32_IRQ_TIM1_BRK_TIM9_PRIORITY 7
+#define STM32_IRQ_TIM1_UP_TIM10_PRIORITY 7
+#define STM32_IRQ_TIM1_TRGCO_TIM11_PRIORITY 7
+#define STM32_IRQ_TIM1_CC_PRIORITY 7
+#define STM32_IRQ_TIM2_PRIORITY 7
+#define STM32_IRQ_TIM3_PRIORITY 7
+#define STM32_IRQ_TIM4_PRIORITY 7
+#define STM32_IRQ_TIM5_PRIORITY 7
+#define STM32_IRQ_TIM6_PRIORITY 7
+#define STM32_IRQ_TIM7_PRIORITY 7
+#define STM32_IRQ_TIM8_BRK_TIM12_PRIORITY 7
+#define STM32_IRQ_TIM8_UP_TIM13_PRIORITY 7
+#define STM32_IRQ_TIM8_TRGCO_TIM14_PRIORITY 7
+#define STM32_IRQ_TIM8_CC_PRIORITY 7
+
+#define STM32_IRQ_USART1_PRIORITY 12
+#define STM32_IRQ_USART2_PRIORITY 12
+#define STM32_IRQ_USART3_PRIORITY 12
+#define STM32_IRQ_UART4_PRIORITY 12
+#define STM32_IRQ_UART5_PRIORITY 12
+#define STM32_IRQ_USART6_PRIORITY 12
+
/*
* ADC driver system settings.
*/
@@ -137,21 +159,11 @@
#define STM32_GPT_USE_TIM7 FALSE
#define STM32_GPT_USE_TIM8 FALSE
#define STM32_GPT_USE_TIM9 FALSE
+#define STM32_GPT_USE_TIM10 FALSE
#define STM32_GPT_USE_TIM11 FALSE
#define STM32_GPT_USE_TIM12 FALSE
+#define STM32_GPT_USE_TIM13 FALSE
#define STM32_GPT_USE_TIM14 FALSE
-#define STM32_GPT_TIM1_IRQ_PRIORITY 7
-#define STM32_GPT_TIM2_IRQ_PRIORITY 7
-#define STM32_GPT_TIM3_IRQ_PRIORITY 7
-#define STM32_GPT_TIM4_IRQ_PRIORITY 7
-#define STM32_GPT_TIM5_IRQ_PRIORITY 7
-#define STM32_GPT_TIM6_IRQ_PRIORITY 7
-#define STM32_GPT_TIM7_IRQ_PRIORITY 7
-#define STM32_GPT_TIM8_IRQ_PRIORITY 7
-#define STM32_GPT_TIM9_IRQ_PRIORITY 7
-#define STM32_GPT_TIM11_IRQ_PRIORITY 7
-#define STM32_GPT_TIM12_IRQ_PRIORITY 7
-#define STM32_GPT_TIM14_IRQ_PRIORITY 7
/*
* I2C driver system settings.
@@ -199,13 +211,11 @@
#define STM32_ICU_USE_TIM5 FALSE
#define STM32_ICU_USE_TIM8 FALSE
#define STM32_ICU_USE_TIM9 FALSE
-#define STM32_ICU_TIM1_IRQ_PRIORITY 7
-#define STM32_ICU_TIM2_IRQ_PRIORITY 7
-#define STM32_ICU_TIM3_IRQ_PRIORITY 7
-#define STM32_ICU_TIM4_IRQ_PRIORITY 7
-#define STM32_ICU_TIM5_IRQ_PRIORITY 7
-#define STM32_ICU_TIM8_IRQ_PRIORITY 7
-#define STM32_ICU_TIM9_IRQ_PRIORITY 7
+#define STM32_ICU_USE_TIM10 FALSE
+#define STM32_ICU_USE_TIM11 FALSE
+#define STM32_ICU_USE_TIM12 FALSE
+#define STM32_ICU_USE_TIM13 FALSE
+#define STM32_ICU_USE_TIM14 FALSE
/*
* MAC driver system settings.
@@ -221,7 +231,6 @@
/*
* PWM driver system settings.
*/
-#define STM32_PWM_USE_ADVANCED FALSE
#define STM32_PWM_USE_TIM1 FALSE
#define STM32_PWM_USE_TIM2 FALSE
#define STM32_PWM_USE_TIM3 FALSE
@@ -229,13 +238,11 @@
#define STM32_PWM_USE_TIM5 FALSE
#define STM32_PWM_USE_TIM8 FALSE
#define STM32_PWM_USE_TIM9 FALSE
-#define STM32_PWM_TIM1_IRQ_PRIORITY 7
-#define STM32_PWM_TIM2_IRQ_PRIORITY 7
-#define STM32_PWM_TIM3_IRQ_PRIORITY 7
-#define STM32_PWM_TIM4_IRQ_PRIORITY 7
-#define STM32_PWM_TIM5_IRQ_PRIORITY 7
-#define STM32_PWM_TIM8_IRQ_PRIORITY 7
-#define STM32_PWM_TIM9_IRQ_PRIORITY 7
+#define STM32_PWM_USE_TIM10 FALSE
+#define STM32_PWM_USE_TIM11 FALSE
+#define STM32_PWM_USE_TIM12 FALSE
+#define STM32_PWM_USE_TIM13 FALSE
+#define STM32_PWM_USE_TIM14 FALSE
/*
* RTC driver system settings.
@@ -265,12 +272,6 @@
#define STM32_SERIAL_USE_UART4 FALSE
#define STM32_SERIAL_USE_UART5 FALSE
#define STM32_SERIAL_USE_USART6 FALSE
-#define STM32_SERIAL_USART1_PRIORITY 12
-#define STM32_SERIAL_USART2_PRIORITY 12
-#define STM32_SERIAL_USART3_PRIORITY 12
-#define STM32_SERIAL_UART4_PRIORITY 12
-#define STM32_SERIAL_UART5_PRIORITY 12
-#define STM32_SERIAL_USART6_PRIORITY 12
/*
* SPI driver system settings.
@@ -319,12 +320,6 @@
#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
-#define STM32_UART_USART1_IRQ_PRIORITY 12
-#define STM32_UART_USART2_IRQ_PRIORITY 12
-#define STM32_UART_USART3_IRQ_PRIORITY 12
-#define STM32_UART_UART4_IRQ_PRIORITY 12
-#define STM32_UART_UART5_IRQ_PRIORITY 12
-#define STM32_UART_USART6_IRQ_PRIORITY 12
#define STM32_UART_USART1_DMA_PRIORITY 0
#define STM32_UART_USART2_DMA_PRIORITY 0
#define STM32_UART_USART3_DMA_PRIORITY 0
diff --git a/platforms/chibios/boards/GENERIC_STM32_F407XE/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_F407XE/configs/mcuconf.h
index 928ee56c71..07399ad2f7 100644
--- a/platforms/chibios/boards/GENERIC_STM32_F407XE/configs/mcuconf.h
+++ b/platforms/chibios/boards/GENERIC_STM32_F407XE/configs/mcuconf.h
@@ -1,5 +1,5 @@
/*
- ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -86,6 +86,28 @@
#define STM32_IRQ_EXTI21_PRIORITY 15
#define STM32_IRQ_EXTI22_PRIORITY 15
+#define STM32_IRQ_TIM1_BRK_TIM9_PRIORITY 7
+#define STM32_IRQ_TIM1_UP_TIM10_PRIORITY 7
+#define STM32_IRQ_TIM1_TRGCO_TIM11_PRIORITY 7
+#define STM32_IRQ_TIM1_CC_PRIORITY 7
+#define STM32_IRQ_TIM2_PRIORITY 7
+#define STM32_IRQ_TIM3_PRIORITY 7
+#define STM32_IRQ_TIM4_PRIORITY 7
+#define STM32_IRQ_TIM5_PRIORITY 7
+#define STM32_IRQ_TIM6_PRIORITY 7
+#define STM32_IRQ_TIM7_PRIORITY 7
+#define STM32_IRQ_TIM8_BRK_TIM12_PRIORITY 7
+#define STM32_IRQ_TIM8_UP_TIM13_PRIORITY 7
+#define STM32_IRQ_TIM8_TRGCO_TIM14_PRIORITY 7
+#define STM32_IRQ_TIM8_CC_PRIORITY 7
+
+#define STM32_IRQ_USART1_PRIORITY 12
+#define STM32_IRQ_USART2_PRIORITY 12
+#define STM32_IRQ_USART3_PRIORITY 12
+#define STM32_IRQ_UART4_PRIORITY 12
+#define STM32_IRQ_UART5_PRIORITY 12
+#define STM32_IRQ_USART6_PRIORITY 12
+
/*
* ADC driver system settings.
*/
@@ -137,21 +159,11 @@
#define STM32_GPT_USE_TIM7 FALSE
#define STM32_GPT_USE_TIM8 FALSE
#define STM32_GPT_USE_TIM9 FALSE
+#define STM32_GPT_USE_TIM10 FALSE
#define STM32_GPT_USE_TIM11 FALSE
#define STM32_GPT_USE_TIM12 FALSE
+#define STM32_GPT_USE_TIM13 FALSE
#define STM32_GPT_USE_TIM14 FALSE
-#define STM32_GPT_TIM1_IRQ_PRIORITY 7
-#define STM32_GPT_TIM2_IRQ_PRIORITY 7
-#define STM32_GPT_TIM3_IRQ_PRIORITY 7
-#define STM32_GPT_TIM4_IRQ_PRIORITY 7
-#define STM32_GPT_TIM5_IRQ_PRIORITY 7
-#define STM32_GPT_TIM6_IRQ_PRIORITY 7
-#define STM32_GPT_TIM7_IRQ_PRIORITY 7
-#define STM32_GPT_TIM8_IRQ_PRIORITY 7
-#define STM32_GPT_TIM9_IRQ_PRIORITY 7
-#define STM32_GPT_TIM11_IRQ_PRIORITY 7
-#define STM32_GPT_TIM12_IRQ_PRIORITY 7
-#define STM32_GPT_TIM14_IRQ_PRIORITY 7
/*
* I2C driver system settings.
@@ -199,13 +211,11 @@
#define STM32_ICU_USE_TIM5 FALSE
#define STM32_ICU_USE_TIM8 FALSE
#define STM32_ICU_USE_TIM9 FALSE
-#define STM32_ICU_TIM1_IRQ_PRIORITY 7
-#define STM32_ICU_TIM2_IRQ_PRIORITY 7
-#define STM32_ICU_TIM3_IRQ_PRIORITY 7
-#define STM32_ICU_TIM4_IRQ_PRIORITY 7
-#define STM32_ICU_TIM5_IRQ_PRIORITY 7
-#define STM32_ICU_TIM8_IRQ_PRIORITY 7
-#define STM32_ICU_TIM9_IRQ_PRIORITY 7
+#define STM32_ICU_USE_TIM10 FALSE
+#define STM32_ICU_USE_TIM11 FALSE
+#define STM32_ICU_USE_TIM12 FALSE
+#define STM32_ICU_USE_TIM13 FALSE
+#define STM32_ICU_USE_TIM14 FALSE
/*
* MAC driver system settings.
@@ -221,7 +231,6 @@
/*
* PWM driver system settings.
*/
-#define STM32_PWM_USE_ADVANCED FALSE
#define STM32_PWM_USE_TIM1 FALSE
#define STM32_PWM_USE_TIM2 FALSE
#define STM32_PWM_USE_TIM3 FALSE
@@ -229,13 +238,11 @@
#define STM32_PWM_USE_TIM5 FALSE
#define STM32_PWM_USE_TIM8 FALSE
#define STM32_PWM_USE_TIM9 FALSE
-#define STM32_PWM_TIM1_IRQ_PRIORITY 7
-#define STM32_PWM_TIM2_IRQ_PRIORITY 7
-#define STM32_PWM_TIM3_IRQ_PRIORITY 7
-#define STM32_PWM_TIM4_IRQ_PRIORITY 7
-#define STM32_PWM_TIM5_IRQ_PRIORITY 7
-#define STM32_PWM_TIM8_IRQ_PRIORITY 7
-#define STM32_PWM_TIM9_IRQ_PRIORITY 7
+#define STM32_PWM_USE_TIM10 FALSE
+#define STM32_PWM_USE_TIM11 FALSE
+#define STM32_PWM_USE_TIM12 FALSE
+#define STM32_PWM_USE_TIM13 FALSE
+#define STM32_PWM_USE_TIM14 FALSE
/*
* RTC driver system settings.
@@ -265,12 +272,6 @@
#define STM32_SERIAL_USE_UART4 FALSE
#define STM32_SERIAL_USE_UART5 FALSE
#define STM32_SERIAL_USE_USART6 FALSE
-#define STM32_SERIAL_USART1_PRIORITY 12
-#define STM32_SERIAL_USART2_PRIORITY 12
-#define STM32_SERIAL_USART3_PRIORITY 12
-#define STM32_SERIAL_UART4_PRIORITY 12
-#define STM32_SERIAL_UART5_PRIORITY 12
-#define STM32_SERIAL_USART6_PRIORITY 12
/*
* SPI driver system settings.
@@ -319,12 +320,6 @@
#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
-#define STM32_UART_USART1_IRQ_PRIORITY 12
-#define STM32_UART_USART2_IRQ_PRIORITY 12
-#define STM32_UART_USART3_IRQ_PRIORITY 12
-#define STM32_UART_UART4_IRQ_PRIORITY 12
-#define STM32_UART_UART5_IRQ_PRIORITY 12
-#define STM32_UART_USART6_IRQ_PRIORITY 12
#define STM32_UART_USART1_DMA_PRIORITY 0
#define STM32_UART_USART2_DMA_PRIORITY 0
#define STM32_UART_USART3_DMA_PRIORITY 0
diff --git a/platforms/chibios/boards/GENERIC_STM32_F411XE/board/board.mk b/platforms/chibios/boards/GENERIC_STM32_F411XE/board/board.mk
new file mode 100644
index 0000000000..bb00b1a2b0
--- /dev/null
+++ b/platforms/chibios/boards/GENERIC_STM32_F411XE/board/board.mk
@@ -0,0 +1,9 @@
+# List of all the board related files.
+BOARDSRC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO64_F411RE/board.c
+
+# Required include directories
+BOARDINC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO64_F411RE
+
+# Shared variables
+ALLCSRC += $(BOARDSRC)
+ALLINC += $(BOARDINC)
diff --git a/platforms/chibios/boards/GENERIC_STM32_F411XE/configs/board.h b/platforms/chibios/boards/GENERIC_STM32_F411XE/configs/board.h
new file mode 100644
index 0000000000..30af6b0c86
--- /dev/null
+++ b/platforms/chibios/boards/GENERIC_STM32_F411XE/configs/board.h
@@ -0,0 +1,20 @@
+/* Copyright 2020 Nick Brassel (tzarc)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <https://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include_next "board.h"
+
+#undef STM32_HSE_BYPASS
diff --git a/platforms/chibios/boards/GENERIC_STM32_F411XE/configs/config.h b/platforms/chibios/boards/GENERIC_STM32_F411XE/configs/config.h
new file mode 100644
index 0000000000..e06ca0b725
--- /dev/null
+++ b/platforms/chibios/boards/GENERIC_STM32_F411XE/configs/config.h
@@ -0,0 +1,22 @@
+/* Copyright 2020 Nick Brassel (tzarc)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <https://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#define BOARD_OTG_NOVBUSSENS 1
+
+#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP
+# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
+#endif
diff --git a/platforms/chibios/boards/GENERIC_STM32_F411XE/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_F411XE/configs/mcuconf.h
new file mode 100644
index 0000000000..e1d45ca487
--- /dev/null
+++ b/platforms/chibios/boards/GENERIC_STM32_F411XE/configs/mcuconf.h
@@ -0,0 +1,252 @@
+/*
+ ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef MCUCONF_H
+#define MCUCONF_H
+
+/*
+ * STM32F4xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0 Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3 Lowest...Highest.
+ */
+
+#define STM32F4xx_MCUCONF
+#define STM32F411_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT FALSE
+#define STM32_PVD_ENABLE FALSE
+#define STM32_PLS STM32_PLS_LEV0
+#define STM32_BKPRAM_ENABLE FALSE
+#define STM32_HSI_ENABLED TRUE
+#define STM32_LSI_ENABLED TRUE
+#define STM32_HSE_ENABLED TRUE
+#define STM32_LSE_ENABLED FALSE
+#define STM32_CLOCK48_REQUIRED TRUE
+#define STM32_SW STM32_SW_PLL
+#define STM32_PLLSRC STM32_PLLSRC_HSE
+#define STM32_PLLM_VALUE 4
+#define STM32_PLLN_VALUE 96
+#define STM32_PLLP_VALUE 2
+#define STM32_PLLQ_VALUE 4
+#define STM32_HPRE STM32_HPRE_DIV1
+#define STM32_PPRE1 STM32_PPRE1_DIV2
+#define STM32_PPRE2 STM32_PPRE2_DIV1
+#define STM32_RTCSEL STM32_RTCSEL_LSI
+#define STM32_RTCPRE_VALUE 8
+#define STM32_MCO1SEL STM32_MCO1SEL_HSI
+#define STM32_MCO1PRE STM32_MCO1PRE_DIV1
+#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK
+#define STM32_MCO2PRE STM32_MCO2PRE_DIV5
+#define STM32_I2SSRC STM32_I2SSRC_CKIN
+#define STM32_PLLI2SN_VALUE 192
+#define STM32_PLLI2SR_VALUE 5
+
+/*
+ * IRQ system settings.
+ */
+#define STM32_IRQ_EXTI0_PRIORITY 6
+#define STM32_IRQ_EXTI1_PRIORITY 6
+#define STM32_IRQ_EXTI2_PRIORITY 6
+#define STM32_IRQ_EXTI3_PRIORITY 6
+#define STM32_IRQ_EXTI4_PRIORITY 6
+#define STM32_IRQ_EXTI5_9_PRIORITY 6
+#define STM32_IRQ_EXTI10_15_PRIORITY 6
+#define STM32_IRQ_EXTI16_PRIORITY 6
+#define STM32_IRQ_EXTI17_PRIORITY 15
+#define STM32_IRQ_EXTI18_PRIORITY 6
+#define STM32_IRQ_EXTI19_PRIORITY 6
+#define STM32_IRQ_EXTI20_PRIORITY 6
+#define STM32_IRQ_EXTI21_PRIORITY 15
+#define STM32_IRQ_EXTI22_PRIORITY 15
+
+#define STM32_IRQ_TIM1_BRK_TIM9_PRIORITY 7
+#define STM32_IRQ_TIM1_UP_TIM10_PRIORITY 7
+#define STM32_IRQ_TIM1_TRGCO_TIM11_PRIORITY 7
+#define STM32_IRQ_TIM1_CC_PRIORITY 7
+#define STM32_IRQ_TIM2_PRIORITY 7
+#define STM32_IRQ_TIM3_PRIORITY 7
+#define STM32_IRQ_TIM4_PRIORITY 7
+#define STM32_IRQ_TIM5_PRIORITY 7
+
+#define STM32_IRQ_USART1_PRIORITY 12
+#define STM32_IRQ_USART2_PRIORITY 12
+#define STM32_IRQ_USART6_PRIORITY 12
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4
+#define STM32_ADC_USE_ADC1 FALSE
+#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4)
+#define STM32_ADC_ADC1_DMA_PRIORITY 2
+#define STM32_ADC_IRQ_PRIORITY 6
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1 FALSE
+#define STM32_GPT_USE_TIM2 FALSE
+#define STM32_GPT_USE_TIM3 FALSE
+#define STM32_GPT_USE_TIM4 FALSE
+#define STM32_GPT_USE_TIM5 FALSE
+#define STM32_GPT_USE_TIM9 FALSE
+#define STM32_GPT_USE_TIM10 FALSE
+#define STM32_GPT_USE_TIM11 FALSE
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1 FALSE
+#define STM32_I2C_USE_I2C2 FALSE
+#define STM32_I2C_USE_I2C3 FALSE
+#define STM32_I2C_BUSY_TIMEOUT 50
+#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2C_I2C1_IRQ_PRIORITY 5
+#define STM32_I2C_I2C2_IRQ_PRIORITY 5
+#define STM32_I2C_I2C3_IRQ_PRIORITY 5
+#define STM32_I2C_I2C1_DMA_PRIORITY 3
+#define STM32_I2C_I2C2_DMA_PRIORITY 3
+#define STM32_I2C_I2C3_DMA_PRIORITY 3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
+
+/*
+ * I2S driver system settings.
+ */
+#define STM32_I2S_USE_SPI2 FALSE
+#define STM32_I2S_USE_SPI3 FALSE
+#define STM32_I2S_SPI2_IRQ_PRIORITY 10
+#define STM32_I2S_SPI3_IRQ_PRIORITY 10
+#define STM32_I2S_SPI2_DMA_PRIORITY 1
+#define STM32_I2S_SPI3_DMA_PRIORITY 1
+#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1 FALSE
+#define STM32_ICU_USE_TIM2 FALSE
+#define STM32_ICU_USE_TIM3 FALSE
+#define STM32_ICU_USE_TIM4 FALSE
+#define STM32_ICU_USE_TIM5 FALSE
+#define STM32_ICU_USE_TIM9 FALSE
+#define STM32_ICU_USE_TIM10 FALSE
+#define STM32_ICU_USE_TIM11 FALSE
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_TIM1 FALSE
+#define STM32_PWM_USE_TIM2 FALSE
+#define STM32_PWM_USE_TIM3 FALSE
+#define STM32_PWM_USE_TIM4 FALSE
+#define STM32_PWM_USE_TIM5 FALSE
+#define STM32_PWM_USE_TIM9 FALSE
+#define STM32_PWM_USE_TIM10 FALSE
+#define STM32_PWM_USE_TIM11 FALSE
+
+/*
+ * RTC driver system settings.
+ */
+#define STM32_RTC_PRESA_VALUE 32
+#define STM32_RTC_PRESS_VALUE 1024
+#define STM32_RTC_CR_INIT 0
+#define STM32_RTC_TAMPCR_INIT 0
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1 FALSE
+#define STM32_SERIAL_USE_USART2 FALSE
+#define STM32_SERIAL_USE_USART6 FALSE
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1 FALSE
+#define STM32_SPI_USE_SPI2 FALSE
+#define STM32_SPI_USE_SPI3 FALSE
+#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0)
+#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3)
+#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#define STM32_SPI_SPI1_DMA_PRIORITY 1
+#define STM32_SPI_SPI2_DMA_PRIORITY 1
+#define STM32_SPI_SPI3_DMA_PRIORITY 1
+#define STM32_SPI_SPI1_IRQ_PRIORITY 10
+#define STM32_SPI_SPI2_IRQ_PRIORITY 10
+#define STM32_SPI_SPI3_IRQ_PRIORITY 10
+#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY 8
+#define STM32_ST_USE_TIMER 2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1 FALSE
+#define STM32_UART_USE_USART2 FALSE
+#define STM32_UART_USE_USART6 FALSE
+#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
+#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
+#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
+#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART1_DMA_PRIORITY 0
+#define STM32_UART_USART2_DMA_PRIORITY 0
+#define STM32_UART_USART6_DMA_PRIORITY 0
+#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_OTG1 TRUE
+#define STM32_USB_OTG1_IRQ_PRIORITY 14
+#define STM32_USB_OTG1_RX_FIFO_SIZE 512
+#define STM32_USB_HOST_WAKEUP_DURATION 2
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG FALSE
+
+#endif /* MCUCONF_H */
diff --git a/platforms/chibios/boards/GENERIC_STM32_G431XB/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_G431XB/configs/mcuconf.h
index d115028300..fd00280115 100644
--- a/platforms/chibios/boards/GENERIC_STM32_G431XB/configs/mcuconf.h
+++ b/platforms/chibios/boards/GENERIC_STM32_G431XB/configs/mcuconf.h
@@ -1,5 +1,5 @@
/*
- ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -39,6 +39,7 @@
* HAL driver system settings.
*/
#define STM32_NO_INIT FALSE
+#define STM32_CLOCK_DYNAMIC FALSE
#define STM32_VOS STM32_VOS_RANGE1
#define STM32_PWR_BOOST TRUE
#define STM32_PWR_CR2 (PWR_CR2_PLS_LEV0)
@@ -227,7 +228,6 @@
/*
* PWM driver system settings.
*/
-#define STM32_PWM_USE_ADVANCED FALSE
#define STM32_PWM_USE_TIM1 FALSE
#define STM32_PWM_USE_TIM2 FALSE
#define STM32_PWM_USE_TIM3 FALSE
@@ -240,6 +240,13 @@
/*
* RTC driver system settings.
*/
+#define STM32_RTC_PRESA_VALUE 32
+#define STM32_RTC_PRESS_VALUE 1024
+#define STM32_RTC_CR_INIT 0
+#define STM32_TAMP_CR1_INIT 0
+#define STM32_TAMP_CR2_INIT 0
+#define STM32_TAMP_FLTCR_INIT 0
+#define STM32_TAMP_IER_INIT 0
/*
* SDC driver system settings.
@@ -255,6 +262,15 @@
#define STM32_SERIAL_USE_LPUART1 FALSE
/*
+ * SIO driver system settings.
+ */
+#define STM32_SIO_USE_USART1 FALSE
+#define STM32_SIO_USE_USART2 FALSE
+#define STM32_SIO_USE_USART3 FALSE
+#define STM32_SIO_USE_UART4 FALSE
+#define STM32_SIO_USE_LPUART1 FALSE
+
+/*
* SPI driver system settings.
*/
#define STM32_SPI_USE_SPI1 FALSE
diff --git a/platforms/chibios/boards/GENERIC_STM32_G474XE/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_G474XE/configs/mcuconf.h
index 5710e2cb45..d6385da624 100644
--- a/platforms/chibios/boards/GENERIC_STM32_G474XE/configs/mcuconf.h
+++ b/platforms/chibios/boards/GENERIC_STM32_G474XE/configs/mcuconf.h
@@ -1,5 +1,5 @@
/*
- ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -41,6 +41,7 @@
* HAL driver system settings.
*/
#define STM32_NO_INIT FALSE
+#define STM32_CLOCK_DYNAMIC FALSE
#define STM32_VOS STM32_VOS_RANGE1
#define STM32_PWR_BOOST TRUE
#define STM32_PWR_CR2 (PWR_CR2_PLS_LEV0)
@@ -274,7 +275,6 @@
/*
* PWM driver system settings.
*/
-#define STM32_PWM_USE_ADVANCED FALSE
#define STM32_PWM_USE_TIM1 FALSE
#define STM32_PWM_USE_TIM2 FALSE
#define STM32_PWM_USE_TIM3 FALSE
@@ -289,6 +289,13 @@
/*
* RTC driver system settings.
*/
+#define STM32_RTC_PRESA_VALUE 32
+#define STM32_RTC_PRESS_VALUE 1024
+#define STM32_RTC_CR_INIT 0
+#define STM32_TAMP_CR1_INIT 0
+#define STM32_TAMP_CR2_INIT 0
+#define STM32_TAMP_FLTCR_INIT 0
+#define STM32_TAMP_IER_INIT 0
/*
* SDC driver system settings.
@@ -305,6 +312,16 @@
#define STM32_SERIAL_USE_LPUART1 FALSE
/*
+ * SIO driver system settings.
+ */
+#define STM32_SIO_USE_USART1 FALSE
+#define STM32_SIO_USE_USART2 FALSE
+#define STM32_SIO_USE_USART3 FALSE
+#define STM32_SIO_USE_UART4 FALSE
+#define STM32_SIO_USE_UART5 FALSE
+#define STM32_SIO_USE_LPUART1 FALSE
+
+/*
* SPI driver system settings.
*/
#define STM32_SPI_USE_SPI1 FALSE
@@ -383,5 +400,6 @@
*/
#define STM32_WSPI_USE_QUADSPI1 FALSE
#define STM32_WSPI_QUADSPI1_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
+#define STM32_WSPI_QUADSPI1_PRESCALER_VALUE 1
#endif /* MCUCONF_H */
diff --git a/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/board.h b/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/board.h
index 2e37d95fe3..de5f85acdd 100644
--- a/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/board.h
+++ b/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/board.h
@@ -18,7 +18,4 @@
#include_next "board.h"
#undef STM32L432xx
-
-// Pretend that we're an L443xx as the ChibiOS definitions for L4x2/L4x3 mistakenly don't enable GPIOH, I2C2, or SPI2.
-// Until ChibiOS upstream is fixed, this should be kept at L443, as nothing in QMK currently utilises the crypto peripheral on the L443.
-#define STM32L443xx
+#define STM32L422xx
diff --git a/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/config.h b/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/config.h
index fc9055ccfb..d67de4cfe2 100644
--- a/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/config.h
+++ b/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/config.h
@@ -18,8 +18,6 @@
/* It is chip dependent, the correct number can be looked up by checking against ST's application note AN2606.
*/
-#define PAL_STM32_OSPEED_HIGHEST PAL_STM32_OSPEED_HIGH
-
#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP
# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
#endif
diff --git a/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/mcuconf.h
index 8ad5a8da21..47f1598b74 100644
--- a/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/mcuconf.h
+++ b/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/mcuconf.h
@@ -1,5 +1,5 @@
/*
- ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -32,12 +32,7 @@
#define MCUCONF_H
#define STM32L4xx_MCUCONF
-#define STM32L412_MCUCONF
#define STM32L422_MCUCONF
-#define STM32L432_MCUCONF
-#define STM32L433_MCUCONF
-#define STM32L442_MCUCONF
-#define STM32L443_MCUCONF
/*
* HAL driver system settings.
@@ -52,16 +47,13 @@
#define STM32_HSE_ENABLED FALSE
#define STM32_LSE_ENABLED FALSE
#define STM32_MSIPLL_ENABLED FALSE
-#define STM32_ADC_CLOCK_ENABLED TRUE
-#define STM32_USB_CLOCK_ENABLED TRUE
-#define STM32_SAI1_CLOCK_ENABLED TRUE
-#define STM32_SAI2_CLOCK_ENABLED TRUE
#define STM32_MSIRANGE STM32_MSIRANGE_4M
#define STM32_MSISRANGE STM32_MSISRANGE_4M
#define STM32_SW STM32_SW_PLL
#define STM32_PLLSRC STM32_PLLSRC_HSI16
#define STM32_PLLM_VALUE 4
#define STM32_PLLN_VALUE 80
+#define STM32_PLLPDIV_VALUE 0
#define STM32_PLLP_VALUE 7
#define STM32_PLLQ_VALUE 4
#define STM32_PLLR_VALUE 4
@@ -73,29 +65,22 @@
#define STM32_MCOPRE STM32_MCOPRE_DIV1
#define STM32_LSCOSEL STM32_LSCOSEL_NOCLOCK
#define STM32_PLLSAI1N_VALUE 72
+#define STM32_PLLSAI1PDIV_VALUE 6
#define STM32_PLLSAI1P_VALUE 7
#define STM32_PLLSAI1Q_VALUE 6
#define STM32_PLLSAI1R_VALUE 6
-#define STM32_PLLSAI2N_VALUE 72
-#define STM32_PLLSAI2P_VALUE 7
-#define STM32_PLLSAI2R_VALUE 6
/*
* Peripherals clock sources.
*/
#define STM32_USART1SEL STM32_USART1SEL_SYSCLK
#define STM32_USART2SEL STM32_USART2SEL_SYSCLK
-#define STM32_USART3SEL STM32_USART3SEL_SYSCLK
-#define STM32_UART4SEL STM32_UART4SEL_SYSCLK
-#define STM32_UART5SEL STM32_UART5SEL_SYSCLK
#define STM32_LPUART1SEL STM32_LPUART1SEL_SYSCLK
#define STM32_I2C1SEL STM32_I2C1SEL_SYSCLK
-#define STM32_I2C2SEL STM32_I2C2SEL_SYSCLK
#define STM32_I2C3SEL STM32_I2C3SEL_SYSCLK
#define STM32_LPTIM1SEL STM32_LPTIM1SEL_PCLK1
#define STM32_LPTIM2SEL STM32_LPTIM2SEL_PCLK1
#define STM32_SAI1SEL STM32_SAI1SEL_OFF
-#define STM32_SAI2SEL STM32_SAI2SEL_OFF
#define STM32_CLK48SEL STM32_CLK48SEL_HSI48
#define STM32_ADCSEL STM32_ADCSEL_SYSCLK
#define STM32_SWPMI1SEL STM32_SWPMI1SEL_PCLK1
@@ -127,7 +112,6 @@
#define STM32_IRQ_USART1_PRIORITY 12
#define STM32_IRQ_USART2_PRIORITY 12
-#define STM32_IRQ_USART3_PRIORITY 12
#define STM32_IRQ_LPUART1_PRIORITY 12
/*
@@ -137,29 +121,15 @@
#define STM32_ADC_USE_ADC1 FALSE
#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
#define STM32_ADC_ADC1_DMA_PRIORITY 2
+#define STM32_ADC_USE_ADC2 FALSE
+#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_ADC_ADC2_DMA_PRIORITY 2
#define STM32_ADC_ADC12_IRQ_PRIORITY 5
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5
+#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5
#define STM32_ADC_ADC123_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1
#define STM32_ADC_ADC123_PRESC ADC_CCR_PRESC_DIV2
-/*
- * CAN driver system settings.
- */
-#define STM32_CAN_USE_CAN1 FALSE
-#define STM32_CAN_CAN1_IRQ_PRIORITY 11
-
-/*
- * DAC driver system settings.
- */
-#define STM32_DAC_DUAL_MODE FALSE
-#define STM32_DAC_USE_DAC1_CH1 FALSE
-#define STM32_DAC_USE_DAC1_CH2 FALSE
-#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10
-#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10
-#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2
-#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2
-#define STM32_DAC_DAC1_CH1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4)
-#define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
/*
* GPT driver system settings.
@@ -198,7 +168,6 @@
/*
* PWM driver system settings.
*/
-#define STM32_PWM_USE_ADVANCED FALSE
#define STM32_PWM_USE_TIM1 FALSE
#define STM32_PWM_USE_TIM2 FALSE
#define STM32_PWM_USE_TIM15 FALSE
@@ -218,23 +187,22 @@
#define STM32_SERIAL_USE_USART1 FALSE
#define STM32_SERIAL_USE_USART2 FALSE
#define STM32_SERIAL_USE_LPUART1 FALSE
-#define STM32_SERIAL_USART1_PRIORITY 12
-#define STM32_SERIAL_USART2_PRIORITY 12
-#define STM32_SERIAL_LPUART1_PRIORITY 12
+
+/*
+ * SIO driver system settings.
+ */
+#define STM32_SIO_USE_USART1 FALSE
+#define STM32_SIO_USE_USART2 FALSE
+#define STM32_SIO_USE_LPUART1 FALSE
/*
* SPI driver system settings.
*/
#define STM32_SPI_USE_SPI1 FALSE
-#define STM32_SPI_USE_SPI3 FALSE
#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3)
#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 4)
-#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 1)
-#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
#define STM32_SPI_SPI1_DMA_PRIORITY 1
-#define STM32_SPI_SPI3_DMA_PRIORITY 1
#define STM32_SPI_SPI1_IRQ_PRIORITY 10
-#define STM32_SPI_SPI3_IRQ_PRIORITY 10
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
/*
diff --git a/platforms/chibios/boards/GENERIC_STM32_L432XC/configs/config.h b/platforms/chibios/boards/GENERIC_STM32_L432XC/configs/config.h
index b1838b30a8..839d031ca4 100644
--- a/platforms/chibios/boards/GENERIC_STM32_L432XC/configs/config.h
+++ b/platforms/chibios/boards/GENERIC_STM32_L432XC/configs/config.h
@@ -2,9 +2,6 @@
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
-// Fixup equivalent usages within QMK as the base board definitions only go up to high
-#define PAL_STM32_OSPEED_HIGHEST PAL_STM32_OSPEED_HIGH
-
#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP
# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
#endif
diff --git a/platforms/chibios/boards/GENERIC_STM32_L432XC/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_L432XC/configs/mcuconf.h
index 707134d49e..be64b04812 100644
--- a/platforms/chibios/boards/GENERIC_STM32_L432XC/configs/mcuconf.h
+++ b/platforms/chibios/boards/GENERIC_STM32_L432XC/configs/mcuconf.h
@@ -1,5 +1,5 @@
/*
- ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -33,7 +33,6 @@
#define STM32L4xx_MCUCONF
#define STM32L432_MCUCONF
-#define STM32L433_MCUCONF
/*
* HAL driver system settings.
@@ -183,7 +182,6 @@
/*
* PWM driver system settings.
*/
-#define STM32_PWM_USE_ADVANCED FALSE
#define STM32_PWM_USE_TIM1 FALSE
#define STM32_PWM_USE_TIM2 FALSE
#define STM32_PWM_USE_TIM15 FALSE
@@ -203,9 +201,13 @@
#define STM32_SERIAL_USE_USART1 FALSE
#define STM32_SERIAL_USE_USART2 FALSE
#define STM32_SERIAL_USE_LPUART1 FALSE
-#define STM32_SERIAL_USART1_PRIORITY 12
-#define STM32_SERIAL_USART2_PRIORITY 12
-#define STM32_SERIAL_LPUART1_PRIORITY 12
+
+/*
+ * SIO driver system settings.
+ */
+#define STM32_SIO_USE_USART1 FALSE
+#define STM32_SIO_USE_USART2 FALSE
+#define STM32_SIO_USE_LPUART1 FALSE
/*
* SPI driver system settings.
diff --git a/platforms/chibios/boards/GENERIC_STM32_L433XC/configs/config.h b/platforms/chibios/boards/GENERIC_STM32_L433XC/configs/config.h
index fc9055ccfb..d67de4cfe2 100644
--- a/platforms/chibios/boards/GENERIC_STM32_L433XC/configs/config.h
+++ b/platforms/chibios/boards/GENERIC_STM32_L433XC/configs/config.h
@@ -18,8 +18,6 @@
/* It is chip dependent, the correct number can be looked up by checking against ST's application note AN2606.
*/
-#define PAL_STM32_OSPEED_HIGHEST PAL_STM32_OSPEED_HIGH
-
#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP
# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
#endif
diff --git a/platforms/chibios/boards/QMK_PROTON_C/configs/chconf.h b/platforms/chibios/boards/QMK_PROTON_C/configs/chconf.h
index f812332960..cc10304a3f 100644
--- a/platforms/chibios/boards/QMK_PROTON_C/configs/chconf.h
+++ b/platforms/chibios/boards/QMK_PROTON_C/configs/chconf.h
@@ -1,5 +1,5 @@
/*
- ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -29,7 +29,27 @@
#define CHCONF_H
#define _CHIBIOS_RT_CONF_
-#define _CHIBIOS_RT_CONF_VER_6_1_
+#define _CHIBIOS_RT_CONF_VER_7_0_
+
+/*===========================================================================*/
+/**
+ * @name System settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Handling of instances.
+ * @note If enabled then threads assigned to various instances can
+ * interact each other using the same synchronization objects.
+ * If disabled then each OS instance is a separate world, no
+ * direct interactions are handled by the OS.
+ */
+#if !defined(CH_CFG_SMP_MODE)
+#define CH_CFG_SMP_MODE FALSE
+#endif
+
+/** @} */
/*===========================================================================*/
/**
@@ -161,6 +181,16 @@
#endif
/**
+ * @brief Time Stamps APIs.
+ * @details If enabled then the time stamps APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_TIMESTAMP)
+#define CH_CFG_USE_TIMESTAMP TRUE
+#endif
+
+/**
* @brief Threads registry APIs.
* @details If enabled then the registry APIs are included in the kernel.
*
@@ -631,7 +661,7 @@
* @details User fields added to the end of the @p ch_system_t structure.
*/
#define CH_CFG_SYSTEM_EXTRA_FIELDS \
- /* Add threads custom fields here.*/
+ /* Add system custom fields here.*/
/**
* @brief System initialization hook.
@@ -639,7 +669,23 @@
* just before interrupts are enabled globally.
*/
#define CH_CFG_SYSTEM_INIT_HOOK() { \
- /* Add threads initialization code here.*/ \
+ /* Add system initialization code here.*/ \
+}
+
+/**
+ * @brief OS instance structure extension.
+ * @details User fields added to the end of the @p os_instance_t structure.
+ */
+#define CH_CFG_OS_INSTANCE_EXTRA_FIELDS \
+ /* Add OS instance custom fields here.*/
+
+/**
+ * @brief OS instance initialization hook.
+ *
+ * @param[in] oip pointer to the @p os_instance_t structure
+ */
+#define CH_CFG_OS_INSTANCE_INIT_HOOK(oip) { \
+ /* Add OS instance initialization code here.*/ \
}
/**
@@ -655,6 +701,8 @@
*
* @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
+ *
+ * @param[in] tp pointer to the @p thread_t structure
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
/* Add threads initialization code here.*/ \
@@ -663,6 +711,8 @@
/**
* @brief Threads finalization hook.
* @details User finalization code added to the @p chThdExit() API.
+ *
+ * @param[in] tp pointer to the @p thread_t structure
*/
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
/* Add threads finalization code here.*/ \
@@ -671,6 +721,9 @@
/**
* @brief Context switch hook.
* @details This hook is invoked just before switching between threads.
+ *
+ * @param[in] ntp thread being switched in
+ * @param[in] otp thread being switched out
*/
#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
/* Context switch code here.*/ \
@@ -745,6 +798,14 @@
/* Trace code here.*/ \
}
+/**
+ * @brief Runtime Faults Collection Unit hook.
+ * @details This hook is invoked each time new faults are collected and stored.
+ */
+#define CH_CFG_RUNTIME_FAULTS_HOOK(mask) { \
+ /* Faults handling code here.*/ \
+}
+
/** @} */
/*===========================================================================*/
diff --git a/platforms/chibios/boards/QMK_PROTON_C/configs/halconf.h b/platforms/chibios/boards/QMK_PROTON_C/configs/halconf.h
index d7a639a6d0..8367328a04 100644
--- a/platforms/chibios/boards/QMK_PROTON_C/configs/halconf.h
+++ b/platforms/chibios/boards/QMK_PROTON_C/configs/halconf.h
@@ -1,5 +1,5 @@
/*
- ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -29,7 +29,7 @@
#define HALCONF_H
#define _CHIBIOS_HAL_CONF_
-#define _CHIBIOS_HAL_CONF_VER_7_1_
+#define _CHIBIOS_HAL_CONF_VER_8_0_
#include <mcuconf.h>
@@ -416,6 +416,26 @@
#endif
/*===========================================================================*/
+/* SIO driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ * default configuration.
+ */
+#if !defined(SIO_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SIO_DEFAULT_BITRATE 38400
+#endif
+
+/**
+ * @brief Support for thread synchronization API.
+ */
+#if !defined(SIO_USE_SYNCHRONIZATION) || defined(__DOXYGEN__)
+#define SIO_USE_SYNCHRONIZATION TRUE
+#endif
+
+/*===========================================================================*/
/* SERIAL_USB driver related setting. */
/*===========================================================================*/
@@ -451,11 +471,10 @@
#endif
/**
- * @brief Enables circular transfers APIs.
- * @note Disabling this option saves both code and data space.
+ * @brief Inserts an assertion on function errors before returning.
*/
-#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__)
-#define SPI_USE_CIRCULAR FALSE
+#if !defined(SPI_USE_ASSERT_ON_ERROR) || defined(__DOXYGEN__)
+#define SPI_USE_ASSERT_ON_ERROR TRUE
#endif
/**
diff --git a/platforms/chibios/boards/QMK_PROTON_C/configs/mcuconf.h b/platforms/chibios/boards/QMK_PROTON_C/configs/mcuconf.h
index 4d7b586c08..cab4c29cf6 100644
--- a/platforms/chibios/boards/QMK_PROTON_C/configs/mcuconf.h
+++ b/platforms/chibios/boards/QMK_PROTON_C/configs/mcuconf.h
@@ -1,5 +1,5 @@
/*
- ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -186,7 +186,6 @@
/*
* PWM driver system settings.
*/
-#define STM32_PWM_USE_ADVANCED FALSE
#define STM32_PWM_USE_TIM1 FALSE
#define STM32_PWM_USE_TIM2 FALSE
#define STM32_PWM_USE_TIM3 TRUE
diff --git a/platforms/chibios/boards/common/configs/chconf.h b/platforms/chibios/boards/common/configs/chconf.h
index 18ad609ca1..5db836e37c 100644
--- a/platforms/chibios/boards/common/configs/chconf.h
+++ b/platforms/chibios/boards/common/configs/chconf.h
@@ -1,5 +1,5 @@
/*
- ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -29,7 +29,27 @@
#define CHCONF_H
#define _CHIBIOS_RT_CONF_
-#define _CHIBIOS_RT_CONF_VER_6_1_
+#define _CHIBIOS_RT_CONF_VER_7_0_
+
+/*===========================================================================*/
+/**
+ * @name System settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Handling of instances.
+ * @note If enabled then threads assigned to various instances can
+ * interact each other using the same synchronization objects.
+ * If disabled then each OS instance is a separate world, no
+ * direct interactions are handled by the OS.
+ */
+#if !defined(CH_CFG_SMP_MODE)
+#define CH_CFG_SMP_MODE FALSE
+#endif
+
+/** @} */
/*===========================================================================*/
/**
@@ -161,6 +181,16 @@
#endif
/**
+ * @brief Time Stamps APIs.
+ * @details If enabled then the time stamps APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_TIMESTAMP)
+#define CH_CFG_USE_TIMESTAMP TRUE
+#endif
+
+/**
* @brief Threads registry APIs.
* @details If enabled then the registry APIs are included in the kernel.
*
@@ -631,7 +661,7 @@
* @details User fields added to the end of the @p ch_system_t structure.
*/
#define CH_CFG_SYSTEM_EXTRA_FIELDS \
- /* Add threads custom fields here.*/
+ /* Add system custom fields here.*/
/**
* @brief System initialization hook.
@@ -639,7 +669,23 @@
* just before interrupts are enabled globally.
*/
#define CH_CFG_SYSTEM_INIT_HOOK() { \
- /* Add threads initialization code here.*/ \
+ /* Add system initialization code here.*/ \
+}
+
+/**
+ * @brief OS instance structure extension.
+ * @details User fields added to the end of the @p os_instance_t structure.
+ */
+#define CH_CFG_OS_INSTANCE_EXTRA_FIELDS \
+ /* Add OS instance custom fields here.*/
+
+/**
+ * @brief OS instance initialization hook.
+ *
+ * @param[in] oip pointer to the @p os_instance_t structure
+ */
+#define CH_CFG_OS_INSTANCE_INIT_HOOK(oip) { \
+ /* Add OS instance initialization code here.*/ \
}
/**
@@ -655,6 +701,8 @@
*
* @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
+ *
+ * @param[in] tp pointer to the @p thread_t structure
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
/* Add threads initialization code here.*/ \
@@ -663,6 +711,8 @@
/**
* @brief Threads finalization hook.
* @details User finalization code added to the @p chThdExit() API.
+ *
+ * @param[in] tp pointer to the @p thread_t structure
*/
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
/* Add threads finalization code here.*/ \
@@ -671,6 +721,9 @@
/**
* @brief Context switch hook.
* @details This hook is invoked just before switching between threads.
+ *
+ * @param[in] ntp thread being switched in
+ * @param[in] otp thread being switched out
*/
#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
/* Context switch code here.*/ \
@@ -745,6 +798,14 @@
/* Trace code here.*/ \
}
+/**
+ * @brief Runtime Faults Collection Unit hook.
+ * @details This hook is invoked each time new faults are collected and stored.
+ */
+#define CH_CFG_RUNTIME_FAULTS_HOOK(mask) { \
+ /* Faults handling code here.*/ \
+}
+
/** @} */
/*===========================================================================*/
diff --git a/platforms/chibios/boards/common/configs/halconf.h b/platforms/chibios/boards/common/configs/halconf.h
index c80f67ee27..1805a77438 100644
--- a/platforms/chibios/boards/common/configs/halconf.h
+++ b/platforms/chibios/boards/common/configs/halconf.h
@@ -1,5 +1,5 @@
/*
- ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -29,7 +29,7 @@
#define HALCONF_H
#define _CHIBIOS_HAL_CONF_
-#define _CHIBIOS_HAL_CONF_VER_7_1_
+#define _CHIBIOS_HAL_CONF_VER_8_0_
#include <mcuconf.h>
@@ -416,6 +416,26 @@
#endif
/*===========================================================================*/
+/* SIO driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ * default configuration.
+ */
+#if !defined(SIO_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SIO_DEFAULT_BITRATE 38400
+#endif
+
+/**
+ * @brief Support for thread synchronization API.
+ */
+#if !defined(SIO_USE_SYNCHRONIZATION) || defined(__DOXYGEN__)
+#define SIO_USE_SYNCHRONIZATION TRUE
+#endif
+
+/*===========================================================================*/
/* SERIAL_USB driver related setting. */
/*===========================================================================*/
@@ -451,11 +471,10 @@
#endif
/**
- * @brief Enables circular transfers APIs.
- * @note Disabling this option saves both code and data space.
+ * @brief Inserts an assertion on function errors before returning.
*/
-#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__)
-#define SPI_USE_CIRCULAR FALSE
+#if !defined(SPI_USE_ASSERT_ON_ERROR) || defined(__DOXYGEN__)
+#define SPI_USE_ASSERT_ON_ERROR TRUE
#endif
/**
diff --git a/platforms/chibios/boards/BLACKPILL_STM32_F401/ld/STM32F401xC_tinyuf2.ld b/platforms/chibios/boards/common/ld/STM32F401xC_tinyuf2.ld
index f4e487dc8f..f4e487dc8f 100644
--- a/platforms/chibios/boards/BLACKPILL_STM32_F401/ld/STM32F401xC_tinyuf2.ld
+++ b/platforms/chibios/boards/common/ld/STM32F401xC_tinyuf2.ld
diff --git a/platforms/chibios/boards/BLACKPILL_STM32_F401/ld/STM32F401xE_tinyuf2.ld b/platforms/chibios/boards/common/ld/STM32F401xE_tinyuf2.ld
index 895d13fa32..895d13fa32 100644
--- a/platforms/chibios/boards/BLACKPILL_STM32_F401/ld/STM32F401xE_tinyuf2.ld
+++ b/platforms/chibios/boards/common/ld/STM32F401xE_tinyuf2.ld
diff --git a/platforms/chibios/boards/BLACKPILL_STM32_F411/ld/STM32F411xC_tinyuf2.ld b/platforms/chibios/boards/common/ld/STM32F411xC_tinyuf2.ld
index 82253d3de5..82253d3de5 100644
--- a/platforms/chibios/boards/BLACKPILL_STM32_F411/ld/STM32F411xC_tinyuf2.ld
+++ b/platforms/chibios/boards/common/ld/STM32F411xC_tinyuf2.ld
diff --git a/platforms/chibios/boards/BLACKPILL_STM32_F411/ld/STM32F411xE_tinyuf2.ld b/platforms/chibios/boards/common/ld/STM32F411xE_tinyuf2.ld
index 1656c67bf7..1656c67bf7 100644
--- a/platforms/chibios/boards/BLACKPILL_STM32_F411/ld/STM32F411xE_tinyuf2.ld
+++ b/platforms/chibios/boards/common/ld/STM32F411xE_tinyuf2.ld
diff --git a/platforms/chibios/converters/promicro_to_proton_c/_pin_defs.h b/platforms/chibios/converters/promicro_to_proton_c/_pin_defs.h
new file mode 100644
index 0000000000..ad1a81692e
--- /dev/null
+++ b/platforms/chibios/converters/promicro_to_proton_c/_pin_defs.h
@@ -0,0 +1,41 @@
+// Copyright 2022 QMK
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+// Left side (front)
+#define D3 PAL_LINE(GPIOA, 9)
+#define D2 PAL_LINE(GPIOA, 10)
+// GND
+// GND
+#define D1 PAL_LINE(GPIOB, 7)
+#define D0 PAL_LINE(GPIOB, 6)
+#define D4 PAL_LINE(GPIOB, 5)
+#define C6 PAL_LINE(GPIOB, 4)
+#define D7 PAL_LINE(GPIOB, 3)
+#define E6 PAL_LINE(GPIOB, 2)
+#define B4 PAL_LINE(GPIOB, 1)
+#define B5 PAL_LINE(GPIOB, 0)
+
+// Right side (front)
+// RAW
+// GND
+// RESET
+// VCC
+#define F4 PAL_LINE(GPIOA, 2)
+#define F5 PAL_LINE(GPIOA, 1)
+#define F6 PAL_LINE(GPIOA, 0)
+#define F7 PAL_LINE(GPIOB, 8)
+#define B1 PAL_LINE(GPIOB, 13)
+#define B3 PAL_LINE(GPIOB, 14)
+#define B2 PAL_LINE(GPIOB, 15)
+#define B6 PAL_LINE(GPIOB, 9)
+
+// LEDs (only D5/C13 uses an actual LED)
+#ifdef CONVERT_TO_PROTON_C_RXLED
+# define D5 PAL_LINE(GPIOC, 14)
+# define B0 PAL_LINE(GPIOC, 13)
+#else
+# define D5 PAL_LINE(GPIOC, 13)
+# define B0 PAL_LINE(GPIOC, 14)
+#endif
diff --git a/platforms/chibios/boards/QMK_PROTON_C/convert_to_proton_c.mk b/platforms/chibios/converters/promicro_to_proton_c/converter.mk
index 0618154678..406adae32c 100644
--- a/platforms/chibios/boards/QMK_PROTON_C/convert_to_proton_c.mk
+++ b/platforms/chibios/converters/promicro_to_proton_c/converter.mk
@@ -1,9 +1,7 @@
# Proton C MCU settings for converting AVR projects
-TARGET := $(TARGET)_proton_c
MCU := STM32F303
BOARD := QMK_PROTON_C
BOOTLOADER := stm32-dfu
-OPT_DEFS += -DCONVERT_TO_PROTON_C
# These are defaults based on what has been implemented for ARM boards
AUDIO_ENABLE ?= yes
diff --git a/platforms/chibios/drivers/ws2812_spi.c b/platforms/chibios/drivers/ws2812_spi.c
index 76191db165..01d8148875 100644
--- a/platforms/chibios/drivers/ws2812_spi.c
+++ b/platforms/chibios/drivers/ws2812_spi.c
@@ -139,7 +139,33 @@ void ws2812_init(void) {
#endif // WS2812_SPI_SCK_PIN
// TODO: more dynamic baudrate
- static const SPIConfig spicfg = {WS2812_SPI_BUFFER_MODE, NULL, PAL_PORT(RGB_DI_PIN), PAL_PAD(RGB_DI_PIN), WS2812_SPI_DIVISOR_CR1_BR_X};
+ static const SPIConfig spicfg = {
+#ifndef HAL_LLD_SELECT_SPI_V2
+// HAL_SPI_V1
+# if SPI_SUPPORTS_CIRCULAR == TRUE
+ WS2812_SPI_BUFFER_MODE,
+# endif
+ NULL, // end_cb
+ PAL_PORT(RGB_DI_PIN),
+ PAL_PAD(RGB_DI_PIN),
+ WS2812_SPI_DIVISOR_CR1_BR_X,
+ 0
+#else
+ // HAL_SPI_V2
+# if SPI_SUPPORTS_CIRCULAR == TRUE
+ WS2812_SPI_BUFFER_MODE,
+# endif
+# if SPI_SUPPORTS_SLAVE_MODE == TRUE
+ false,
+# endif
+ NULL, // data_cb
+ NULL, // error_cb
+ PAL_PORT(RGB_DI_PIN),
+ PAL_PAD(RGB_DI_PIN),
+ WS2812_SPI_DIVISOR_CR1_BR_X,
+ 0
+#endif
+ };
spiAcquireBus(&WS2812_SPI); /* Acquire ownership of the bus. */
spiStart(&WS2812_SPI, &spicfg); /* Setup transfer parameters. */
diff --git a/platforms/chibios/eeprom_stm32_defs.h b/platforms/chibios/eeprom_stm32_defs.h
index a6ceb41355..57d0440330 100644
--- a/platforms/chibios/eeprom_stm32_defs.h
+++ b/platforms/chibios/eeprom_stm32_defs.h
@@ -25,7 +25,7 @@
# ifndef FEE_PAGE_COUNT
# define FEE_PAGE_COUNT 2 // How many pages are used
# endif
-# elif defined(STM32F103xE) || defined(STM32F303xC) || defined(STM32F072xB) || defined(STM32F070xB)
+# elif defined(STM32F103xE) || defined(STM32F303xC) || defined(STM32F303xE) || defined(STM32F072xB) || defined(STM32F070xB)
# ifndef FEE_PAGE_SIZE
# define FEE_PAGE_SIZE 0x800 // Page size = 2KByte
# endif
@@ -51,7 +51,7 @@
# define FEE_MCU_FLASH_SIZE 128 // Size in Kb
# elif defined(STM32F303xC) || defined(STM32F401xC)
# define FEE_MCU_FLASH_SIZE 256 // Size in Kb
-# elif defined(STM32F103xE) || defined(STM32F401xE) || defined(STM32F411xE)
+# elif defined(STM32F103xE) || defined(STM32F303xE) || defined(STM32F401xE) || defined(STM32F411xE)
# define FEE_MCU_FLASH_SIZE 512 // Size in Kb
# elif defined(STM32F405xG)
# define FEE_MCU_FLASH_SIZE 1024 // Size in Kb
diff --git a/platforms/chibios/flash.mk b/platforms/chibios/flash.mk
index 6ee53172d2..a91ef2cf35 100644
--- a/platforms/chibios/flash.mk
+++ b/platforms/chibios/flash.mk
@@ -40,6 +40,18 @@ endef
dfu-util: $(BUILD_DIR)/$(TARGET).bin cpfirmware sizeafter
$(call EXEC_DFU_UTIL)
+define EXEC_UF2_UTIL_DEPLOY
+ if ! $(UF2CONV) --deploy $(BUILD_DIR)/$(TARGET).uf2 2>/dev/null; then \
+ printf "$(MSG_BOOTLOADER_NOT_FOUND_QUICK_RETRY)" ;\
+ sleep $(BOOTLOADER_RETRY_TIME) ;\
+ while ! $(UF2CONV) --deploy $(BUILD_DIR)/$(TARGET).uf2 2>/dev/null; do \
+ printf "." ;\
+ sleep $(BOOTLOADER_RETRY_TIME) ;\
+ done ;\
+ printf "\n" ;\
+ fi
+endef
+
# TODO: Remove once ARM has a way to configure EECONFIG_HANDEDNESS
# within the emulated eeprom via dfu-util or another tool
ifneq (,$(filter $(MAKECMDGOALS),dfu-util-split-left))
@@ -90,6 +102,8 @@ ifneq ($(strip $(PROGRAM_CMD)),)
$(UNSYNC_OUTPUT_CMD) && $(PROGRAM_CMD)
else ifeq ($(strip $(BOOTLOADER)),kiibohd)
$(UNSYNC_OUTPUT_CMD) && $(call EXEC_DFU_UTIL)
+else ifeq ($(strip $(BOOTLOADER)),tinyuf2)
+ $(UNSYNC_OUTPUT_CMD) && $(call EXEC_UF2_UTIL_DEPLOY)
else ifeq ($(strip $(MCU_FAMILY)),KINETIS)
$(UNSYNC_OUTPUT_CMD) && $(call EXEC_TEENSY)
else ifeq ($(strip $(MCU_FAMILY)),MIMXRT1062)
diff --git a/platforms/chibios/gpio.h b/platforms/chibios/gpio.h
index eb44a18f9c..80551abac5 100644
--- a/platforms/chibios/gpio.h
+++ b/platforms/chibios/gpio.h
@@ -31,7 +31,14 @@ typedef ioline_t pin_t;
#define writePinHigh(pin) palSetLine(pin)
#define writePinLow(pin) palClearLine(pin)
-#define writePin(pin, level) ((level) ? (writePinHigh(pin)) : (writePinLow(pin)))
+#define writePin(pin, level) \
+ do { \
+ if (level) { \
+ writePinHigh(pin); \
+ } else { \
+ writePinLow(pin); \
+ } \
+ } while (0)
#define readPin(pin) palReadLine(pin)
diff --git a/platforms/chibios/hardware_id.c b/platforms/chibios/hardware_id.c
new file mode 100644
index 0000000000..888a275465
--- /dev/null
+++ b/platforms/chibios/hardware_id.c
@@ -0,0 +1,15 @@
+// Copyright 2022 QMK
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include <ch.h>
+#include "hardware_id.h"
+
+hardware_id_t get_hardware_id(void) {
+ hardware_id_t id = {0};
+#ifdef UID_BASE
+ id.data[0] = (uint32_t)(*((uint32_t *)UID_BASE));
+ id.data[1] = (uint32_t)(*((uint32_t *)(UID_BASE + 4)));
+ id.data[1] = (uint32_t)(*((uint32_t *)(UID_BASE + 8)));
+#endif
+ return id;
+}
diff --git a/platforms/chibios/pin_defs.h b/platforms/chibios/pin_defs.h
deleted file mode 100644
index c03f8de0c2..0000000000
--- a/platforms/chibios/pin_defs.h
+++ /dev/null
@@ -1,323 +0,0 @@
-/* Copyright 2021 QMK
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#pragma once
-
-// Defines mapping for Proton C replacement
-#ifdef CONVERT_TO_PROTON_C
-// Left side (front)
-# define D3 PAL_LINE(GPIOA, 9)
-# define D2 PAL_LINE(GPIOA, 10)
-// GND
-// GND
-# define D1 PAL_LINE(GPIOB, 7)
-# define D0 PAL_LINE(GPIOB, 6)
-# define D4 PAL_LINE(GPIOB, 5)
-# define C6 PAL_LINE(GPIOB, 4)
-# define D7 PAL_LINE(GPIOB, 3)
-# define E6 PAL_LINE(GPIOB, 2)
-# define B4 PAL_LINE(GPIOB, 1)
-# define B5 PAL_LINE(GPIOB, 0)
-
-// Right side (front)
-// RAW
-// GND
-// RESET
-// VCC
-# define F4 PAL_LINE(GPIOA, 2)
-# define F5 PAL_LINE(GPIOA, 1)
-# define F6 PAL_LINE(GPIOA, 0)
-# define F7 PAL_LINE(GPIOB, 8)
-# define B1 PAL_LINE(GPIOB, 13)
-# define B3 PAL_LINE(GPIOB, 14)
-# define B2 PAL_LINE(GPIOB, 15)
-# define B6 PAL_LINE(GPIOB, 9)
-
-// LEDs (only D5/C13 uses an actual LED)
-# ifdef CONVERT_TO_PROTON_C_RXLED
-# define D5 PAL_LINE(GPIOC, 14)
-# define B0 PAL_LINE(GPIOC, 13)
-# else
-# define D5 PAL_LINE(GPIOC, 13)
-# define B0 PAL_LINE(GPIOC, 14)
-# endif
-#else
-# define A0 PAL_LINE(GPIOA, 0)
-# define A1 PAL_LINE(GPIOA, 1)
-# define A2 PAL_LINE(GPIOA, 2)
-# define A3 PAL_LINE(GPIOA, 3)
-# define A4 PAL_LINE(GPIOA, 4)
-# define A5 PAL_LINE(GPIOA, 5)
-# define A6 PAL_LINE(GPIOA, 6)
-# define A7 PAL_LINE(GPIOA, 7)
-# define A8 PAL_LINE(GPIOA, 8)
-# define A9 PAL_LINE(GPIOA, 9)
-# define A10 PAL_LINE(GPIOA, 10)
-# define A11 PAL_LINE(GPIOA, 11)
-# define A12 PAL_LINE(GPIOA, 12)
-# define A13 PAL_LINE(GPIOA, 13)
-# define A14 PAL_LINE(GPIOA, 14)
-# define A15 PAL_LINE(GPIOA, 15)
-# define A16 PAL_LINE(GPIOA, 16)
-# define A17 PAL_LINE(GPIOA, 17)
-# define A18 PAL_LINE(GPIOA, 18)
-# define A19 PAL_LINE(GPIOA, 19)
-# define A20 PAL_LINE(GPIOA, 20)
-# define A21 PAL_LINE(GPIOA, 21)
-# define A22 PAL_LINE(GPIOA, 22)
-# define A23 PAL_LINE(GPIOA, 23)
-# define A24 PAL_LINE(GPIOA, 24)
-# define A25 PAL_LINE(GPIOA, 25)
-# define A26 PAL_LINE(GPIOA, 26)
-# define A27 PAL_LINE(GPIOA, 27)
-# define A28 PAL_LINE(GPIOA, 28)
-# define A29 PAL_LINE(GPIOA, 29)
-# define A30 PAL_LINE(GPIOA, 30)
-# define A31 PAL_LINE(GPIOA, 31)
-# define A32 PAL_LINE(GPIOA, 32)
-# define B0 PAL_LINE(GPIOB, 0)
-# define B1 PAL_LINE(GPIOB, 1)
-# define B2 PAL_LINE(GPIOB, 2)
-# define B3 PAL_LINE(GPIOB, 3)
-# define B4 PAL_LINE(GPIOB, 4)
-# define B5 PAL_LINE(GPIOB, 5)
-# define B6 PAL_LINE(GPIOB, 6)
-# define B7 PAL_LINE(GPIOB, 7)
-# define B8 PAL_LINE(GPIOB, 8)
-# define B9 PAL_LINE(GPIOB, 9)
-# define B10 PAL_LINE(GPIOB, 10)
-# define B11 PAL_LINE(GPIOB, 11)
-# define B12 PAL_LINE(GPIOB, 12)
-# define B13 PAL_LINE(GPIOB, 13)
-# define B14 PAL_LINE(GPIOB, 14)
-# define B15 PAL_LINE(GPIOB, 15)
-# define B16 PAL_LINE(GPIOB, 16)
-# define B17 PAL_LINE(GPIOB, 17)
-# define B18 PAL_LINE(GPIOB, 18)
-# define B19 PAL_LINE(GPIOB, 19)
-# define B20 PAL_LINE(GPIOB, 20)
-# define B21 PAL_LINE(GPIOB, 21)
-# define B22 PAL_LINE(GPIOB, 22)
-# define B23 PAL_LINE(GPIOB, 23)
-# define B24 PAL_LINE(GPIOB, 24)
-# define B25 PAL_LINE(GPIOB, 25)
-# define B26 PAL_LINE(GPIOB, 26)
-# define B27 PAL_LINE(GPIOB, 27)
-# define B28 PAL_LINE(GPIOB, 28)
-# define B29 PAL_LINE(GPIOB, 29)
-# define B30 PAL_LINE(GPIOB, 30)
-# define B31 PAL_LINE(GPIOB, 31)
-# define B32 PAL_LINE(GPIOB, 32)
-# define C0 PAL_LINE(GPIOC, 0)
-# define C1 PAL_LINE(GPIOC, 1)
-# define C2 PAL_LINE(GPIOC, 2)
-# define C3 PAL_LINE(GPIOC, 3)
-# define C4 PAL_LINE(GPIOC, 4)
-# define C5 PAL_LINE(GPIOC, 5)
-# define C6 PAL_LINE(GPIOC, 6)
-# define C7 PAL_LINE(GPIOC, 7)
-# define C8 PAL_LINE(GPIOC, 8)
-# define C9 PAL_LINE(GPIOC, 9)
-# define C10 PAL_LINE(GPIOC, 10)
-# define C11 PAL_LINE(GPIOC, 11)
-# define C12 PAL_LINE(GPIOC, 12)
-# define C13 PAL_LINE(GPIOC, 13)
-# define C14 PAL_LINE(GPIOC, 14)
-# define C15 PAL_LINE(GPIOC, 15)
-# define C16 PAL_LINE(GPIOC, 16)
-# define C17 PAL_LINE(GPIOC, 17)
-# define C18 PAL_LINE(GPIOC, 18)
-# define C19 PAL_LINE(GPIOC, 19)
-# define C20 PAL_LINE(GPIOC, 20)
-# define C21 PAL_LINE(GPIOC, 21)
-# define C22 PAL_LINE(GPIOC, 22)
-# define C23 PAL_LINE(GPIOC, 23)
-# define C24 PAL_LINE(GPIOC, 24)
-# define C25 PAL_LINE(GPIOC, 25)
-# define C26 PAL_LINE(GPIOC, 26)
-# define C27 PAL_LINE(GPIOC, 27)
-# define C28 PAL_LINE(GPIOC, 28)
-# define C29 PAL_LINE(GPIOC, 29)
-# define C30 PAL_LINE(GPIOC, 30)
-# define C31 PAL_LINE(GPIOC, 31)
-# define C32 PAL_LINE(GPIOC, 32)
-# define D0 PAL_LINE(GPIOD, 0)
-# define D1 PAL_LINE(GPIOD, 1)
-# define D2 PAL_LINE(GPIOD, 2)
-# define D3 PAL_LINE(GPIOD, 3)
-# define D4 PAL_LINE(GPIOD, 4)
-# define D5 PAL_LINE(GPIOD, 5)
-# define D6 PAL_LINE(GPIOD, 6)
-# define D7 PAL_LINE(GPIOD, 7)
-# define D8 PAL_LINE(GPIOD, 8)
-# define D9 PAL_LINE(GPIOD, 9)
-# define D10 PAL_LINE(GPIOD, 10)
-# define D11 PAL_LINE(GPIOD, 11)
-# define D12 PAL_LINE(GPIOD, 12)
-# define D13 PAL_LINE(GPIOD, 13)
-# define D14 PAL_LINE(GPIOD, 14)
-# define D15 PAL_LINE(GPIOD, 15)
-# define D16 PAL_LINE(GPIOD, 16)
-# define D17 PAL_LINE(GPIOD, 17)
-# define D18 PAL_LINE(GPIOD, 18)
-# define D19 PAL_LINE(GPIOD, 19)
-# define D20 PAL_LINE(GPIOD, 20)
-# define D21 PAL_LINE(GPIOD, 21)
-# define D22 PAL_LINE(GPIOD, 22)
-# define D23 PAL_LINE(GPIOD, 23)
-# define D24 PAL_LINE(GPIOD, 24)
-# define D25 PAL_LINE(GPIOD, 25)
-# define D26 PAL_LINE(GPIOD, 26)
-# define D27 PAL_LINE(GPIOD, 27)
-# define D28 PAL_LINE(GPIOD, 28)
-# define D29 PAL_LINE(GPIOD, 29)
-# define D30 PAL_LINE(GPIOD, 30)
-# define D31 PAL_LINE(GPIOD, 31)
-# define D32 PAL_LINE(GPIOD, 32)
-# define E0 PAL_LINE(GPIOE, 0)
-# define E1 PAL_LINE(GPIOE, 1)
-# define E2 PAL_LINE(GPIOE, 2)
-# define E3 PAL_LINE(GPIOE, 3)
-# define E4 PAL_LINE(GPIOE, 4)
-# define E5 PAL_LINE(GPIOE, 5)
-# define E6 PAL_LINE(GPIOE, 6)
-# define E7 PAL_LINE(GPIOE, 7)
-# define E8 PAL_LINE(GPIOE, 8)
-# define E9 PAL_LINE(GPIOE, 9)
-# define E10 PAL_LINE(GPIOE, 10)
-# define E11 PAL_LINE(GPIOE, 11)
-# define E12 PAL_LINE(GPIOE, 12)
-# define E13 PAL_LINE(GPIOE, 13)
-# define E14 PAL_LINE(GPIOE, 14)
-# define E15 PAL_LINE(GPIOE, 15)
-# define E16 PAL_LINE(GPIOE, 16)
-# define E17 PAL_LINE(GPIOE, 17)
-# define E18 PAL_LINE(GPIOE, 18)
-# define E19 PAL_LINE(GPIOE, 19)
-# define E20 PAL_LINE(GPIOE, 20)
-# define E21 PAL_LINE(GPIOE, 21)
-# define E22 PAL_LINE(GPIOE, 22)
-# define E23 PAL_LINE(GPIOE, 23)
-# define E24 PAL_LINE(GPIOE, 24)
-# define E25 PAL_LINE(GPIOE, 25)
-# define E26 PAL_LINE(GPIOE, 26)
-# define E27 PAL_LINE(GPIOE, 27)
-# define E28 PAL_LINE(GPIOE, 28)
-# define E29 PAL_LINE(GPIOE, 29)
-# define E30 PAL_LINE(GPIOE, 30)
-# define E31 PAL_LINE(GPIOE, 31)
-# define E32 PAL_LINE(GPIOE, 32)
-# define F0 PAL_LINE(GPIOF, 0)
-# define F1 PAL_LINE(GPIOF, 1)
-# define F2 PAL_LINE(GPIOF, 2)
-# define F3 PAL_LINE(GPIOF, 3)
-# define F4 PAL_LINE(GPIOF, 4)
-# define F5 PAL_LINE(GPIOF, 5)
-# define F6 PAL_LINE(GPIOF, 6)
-# define F7 PAL_LINE(GPIOF, 7)
-# define F8 PAL_LINE(GPIOF, 8)
-# define F9 PAL_LINE(GPIOF, 9)
-# define F10 PAL_LINE(GPIOF, 10)
-# define F11 PAL_LINE(GPIOF, 11)
-# define F12 PAL_LINE(GPIOF, 12)
-# define F13 PAL_LINE(GPIOF, 13)
-# define F14 PAL_LINE(GPIOF, 14)
-# define F15 PAL_LINE(GPIOF, 15)
-# define G0 PAL_LINE(GPIOG, 0)
-# define G1 PAL_LINE(GPIOG, 1)
-# define G2 PAL_LINE(GPIOG, 2)
-# define G3 PAL_LINE(GPIOG, 3)
-# define G4 PAL_LINE(GPIOG, 4)
-# define G5 PAL_LINE(GPIOG, 5)
-# define G6 PAL_LINE(GPIOG, 6)
-# define G7 PAL_LINE(GPIOG, 7)
-# define G8 PAL_LINE(GPIOG, 8)
-# define G9 PAL_LINE(GPIOG, 9)
-# define G10 PAL_LINE(GPIOG, 10)
-# define G11 PAL_LINE(GPIOG, 11)
-# define G12 PAL_LINE(GPIOG, 12)
-# define G13 PAL_LINE(GPIOG, 13)
-# define G14 PAL_LINE(GPIOG, 14)
-# define G15 PAL_LINE(GPIOG, 15)
-# define H0 PAL_LINE(GPIOH, 0)
-# define H1 PAL_LINE(GPIOH, 1)
-# define H2 PAL_LINE(GPIOH, 2)
-# define H3 PAL_LINE(GPIOH, 3)
-# define H4 PAL_LINE(GPIOH, 4)
-# define H5 PAL_LINE(GPIOH, 5)
-# define H6 PAL_LINE(GPIOH, 6)
-# define H7 PAL_LINE(GPIOH, 7)
-# define H8 PAL_LINE(GPIOH, 8)
-# define H9 PAL_LINE(GPIOH, 9)
-# define H10 PAL_LINE(GPIOH, 10)
-# define H11 PAL_LINE(GPIOH, 11)
-# define H12 PAL_LINE(GPIOH, 12)
-# define H13 PAL_LINE(GPIOH, 13)
-# define H14 PAL_LINE(GPIOH, 14)
-# define H15 PAL_LINE(GPIOH, 15)
-# define I0 PAL_LINE(GPIOI, 0)
-# define I1 PAL_LINE(GPIOI, 1)
-# define I2 PAL_LINE(GPIOI, 2)
-# define I3 PAL_LINE(GPIOI, 3)
-# define I4 PAL_LINE(GPIOI, 4)
-# define I5 PAL_LINE(GPIOI, 5)
-# define I6 PAL_LINE(GPIOI, 6)
-# define I7 PAL_LINE(GPIOI, 7)
-# define I8 PAL_LINE(GPIOI, 8)
-# define I9 PAL_LINE(GPIOI, 9)
-# define I10 PAL_LINE(GPIOI, 10)
-# define I11 PAL_LINE(GPIOI, 11)
-# define I12 PAL_LINE(GPIOI, 12)
-# define I13 PAL_LINE(GPIOI, 13)
-# define I14 PAL_LINE(GPIOI, 14)
-# define I15 PAL_LINE(GPIOI, 15)
-# define J0 PAL_LINE(GPIOJ, 0)
-# define J1 PAL_LINE(GPIOJ, 1)
-# define J2 PAL_LINE(GPIOJ, 2)
-# define J3 PAL_LINE(GPIOJ, 3)
-# define J4 PAL_LINE(GPIOJ, 4)
-# define J5 PAL_LINE(GPIOJ, 5)
-# define J6 PAL_LINE(GPIOJ, 6)
-# define J7 PAL_LINE(GPIOJ, 7)
-# define J8 PAL_LINE(GPIOJ, 8)
-# define J9 PAL_LINE(GPIOJ, 9)
-# define J10 PAL_LINE(GPIOJ, 10)
-# define J11 PAL_LINE(GPIOJ, 11)
-# define J12 PAL_LINE(GPIOJ, 12)
-# define J13 PAL_LINE(GPIOJ, 13)
-# define J14 PAL_LINE(GPIOJ, 14)
-# define J15 PAL_LINE(GPIOJ, 15)
-// Keyboards can `#define KEYBOARD_REQUIRES_GPIOK` if they need to access GPIO-K pins. These conflict with a whole
-// bunch of layout definitions, so it's intentionally left out unless absolutely required -- in that case, the
-// keyboard designer should use a different symbol when defining their layout macros.
-# ifdef KEYBOARD_REQUIRES_GPIOK
-# define K0 PAL_LINE(GPIOK, 0)
-# define K1 PAL_LINE(GPIOK, 1)
-# define K2 PAL_LINE(GPIOK, 2)
-# define K3 PAL_LINE(GPIOK, 3)
-# define K4 PAL_LINE(GPIOK, 4)
-# define K5 PAL_LINE(GPIOK, 5)
-# define K6 PAL_LINE(GPIOK, 6)
-# define K7 PAL_LINE(GPIOK, 7)
-# define K8 PAL_LINE(GPIOK, 8)
-# define K9 PAL_LINE(GPIOK, 9)
-# define K10 PAL_LINE(GPIOK, 10)
-# define K11 PAL_LINE(GPIOK, 11)
-# define K12 PAL_LINE(GPIOK, 12)
-# define K13 PAL_LINE(GPIOK, 13)
-# define K14 PAL_LINE(GPIOK, 14)
-# define K15 PAL_LINE(GPIOK, 15)
-# endif
-#endif
diff --git a/platforms/chibios/platform.mk b/platforms/chibios/platform.mk
index 6fd1fd83f5..91dd0479bc 100644
--- a/platforms/chibios/platform.mk
+++ b/platforms/chibios/platform.mk
@@ -39,7 +39,6 @@ ifeq ($(strip $(MCU)), risc-v)
STARTUP_MK = $(CHIBIOS_CONTRIB)/os/common/startup/RISCV-ECLIC/compilers/GCC/mk/startup_$(MCU_STARTUP).mk
PORT_V = $(CHIBIOS_CONTRIB)/os/common/ports/RISCV-ECLIC/compilers/GCC/mk/port.mk
RULESPATH = $(CHIBIOS_CONTRIB)/os/common/startup/RISCV-ECLIC/compilers/GCC
- PLATFORM_MK = $(CHIBIOS_CONTRIB)/os/hal/ports/GD/GD32VF103/platform.mk
else
# ARM Support
CHIBIOS_PORT ?=
@@ -82,10 +81,15 @@ ifeq ("$(PLATFORM_NAME)","")
PLATFORM_NAME = platform
endif
+# If no MCU port name was specified, use the family instead
+ifeq ("$(MCU_PORT_NAME)","")
+ MCU_PORT_NAME = $(MCU_FAMILY)
+endif
+
ifeq ("$(wildcard $(PLATFORM_MK))","")
- PLATFORM_MK = $(CHIBIOS)/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)/$(PLATFORM_NAME).mk
+ PLATFORM_MK = $(CHIBIOS)/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)/$(PLATFORM_NAME).mk
ifeq ("$(wildcard $(PLATFORM_MK))","")
- PLATFORM_MK = $(CHIBIOS_CONTRIB)/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)/$(PLATFORM_NAME).mk
+ PLATFORM_MK = $(CHIBIOS_CONTRIB)/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)/$(PLATFORM_NAME).mk
endif
endif
diff --git a/platforms/chibios/timer.c b/platforms/chibios/timer.c
index e3bdfdcc37..5e01ea6372 100644
--- a/platforms/chibios/timer.c
+++ b/platforms/chibios/timer.c
@@ -40,7 +40,7 @@ static virtual_timer_t update_timer;
# define UPDATE_INTERVAL (((sysinterval_t)1) << (CH_CFG_ST_RESOLUTION - 1))
// VT callback function to keep the overflow bits of the system tick counter updated.
-static void update_fn(void *arg) {
+static void update_fn(struct ch_virtual_timer *timer, void *arg) {
(void)arg;
chSysLockFromISR();
get_system_time_ticks();
diff --git a/platforms/chibios/wait.c b/platforms/chibios/wait.c
index 56fd6ffcec..88cb5e6d54 100644
--- a/platforms/chibios/wait.c
+++ b/platforms/chibios/wait.c
@@ -31,7 +31,7 @@ void wait_us(uint16_t duration) {
* Only use this timer on the main thread;
* other threads need to use their own timer.
*/
- if (chThdGetSelfX() == &ch.mainthread && duration < (1ULL << (sizeof(gptcnt_t) * 8))) {
+ if (chThdGetSelfX() == &(currcore->mainthread) && duration < (1ULL << (sizeof(gptcnt_t) * 8))) {
gptStart(&WAIT_US_TIMER, &gpt_cfg);
gptPolledDelay(&WAIT_US_TIMER, duration);
} else {