summaryrefslogtreecommitdiff
path: root/platforms/chibios/drivers/serial_usart.c
diff options
context:
space:
mode:
Diffstat (limited to 'platforms/chibios/drivers/serial_usart.c')
-rw-r--r--platforms/chibios/drivers/serial_usart.c191
1 files changed, 10 insertions, 181 deletions
diff --git a/platforms/chibios/drivers/serial_usart.c b/platforms/chibios/drivers/serial_usart.c
index 7ea25d005b..f76afb5db4 100644
--- a/platforms/chibios/drivers/serial_usart.c
+++ b/platforms/chibios/drivers/serial_usart.c
@@ -3,6 +3,7 @@
// SPDX-License-Identifier: GPL-2.0-or-later
#include "serial_usart.h"
+#include "serial_protocol.h"
#include "synchronization_util.h"
#if defined(SERIAL_USART_CONFIG)
@@ -26,14 +27,6 @@ static QMKSerialConfig serial_config = {
static QMKSerialDriver* serial_driver = (QMKSerialDriver*)&SERIAL_USART_DRIVER;
-static inline bool react_to_transactions(void);
-static inline bool __attribute__((nonnull)) receive(uint8_t* destination, const size_t size);
-static inline bool __attribute__((nonnull)) receive_blocking(uint8_t* destination, const size_t size);
-static inline bool __attribute__((nonnull)) send(const uint8_t* source, const size_t size);
-static inline bool initiate_transaction(uint8_t sstd_index);
-static inline void usart_clear(void);
-static inline void usart_driver_start(void);
-
#if HAL_USE_SERIAL
/**
@@ -43,10 +36,7 @@ static inline void usart_driver_start(void) {
sdStart(serial_driver, &serial_config);
}
-/**
- * @brief Clear the receive input queue.
- */
-static inline void usart_clear(void) {
+inline void serial_transport_driver_clear(void) {
osalSysLock();
bool volatile queue_not_empty = !iqIsEmptyI(&serial_driver->iqueue);
osalSysUnlock();
@@ -89,10 +79,7 @@ static inline void usart_driver_start(void) {
sioStartOperation(serial_driver, &serial_usart_operation);
}
-/**
- * @brief Clear the receive input queue, as some MCUs have built-in hardware FIFOs.
- */
-static inline void usart_clear(void) {
+inline void serial_transport_driver_clear(void) {
osalSysLock();
while (!sioIsRXEmptyX(serial_driver)) {
(void)sioGetX(serial_driver);
@@ -106,13 +93,7 @@ static inline void usart_clear(void) {
#endif
-/**
- * @brief Blocking send of buffer with timeout.
- *
- * @return true Send success.
- * @return false Send failed.
- */
-static inline bool send(const uint8_t* source, const size_t size) {
+inline bool serial_transport_send(const uint8_t* source, const size_t size) {
bool success = (size_t)chnWriteTimeout(serial_driver, source, size, TIME_MS2I(SERIAL_USART_TIMEOUT)) == size;
#if !defined(SERIAL_USART_FULL_DUPLEX)
@@ -129,13 +110,13 @@ static inline bool send(const uint8_t* source, const size_t size) {
uint8_t dump[64];
while (unlikely(bytes_left >= 64)) {
- if (unlikely(!receive(dump, 64))) {
+ if (unlikely(!serial_transport_receive(dump, 64))) {
return false;
}
bytes_left -= 64;
}
- return receive(dump, bytes_left);
+ return serial_transport_receive(dump, bytes_left);
# else
/* The SIO driver directly accesses the hardware FIFOs of the USART
* peripheral. As these are limited in depth, the RX FIFO might have been
@@ -159,24 +140,12 @@ static inline bool send(const uint8_t* source, const size_t size) {
return success;
}
-/**
- * @brief Blocking receive of size * bytes with timeout.
- *
- * @return true Receive success.
- * @return false Receive failed, e.g. by timeout.
- */
-static inline bool receive(uint8_t* destination, const size_t size) {
+inline bool serial_transport_receive(uint8_t* destination, const size_t size) {
bool success = (size_t)chnReadTimeout(serial_driver, destination, size, TIME_MS2I(SERIAL_USART_TIMEOUT)) == size;
return success;
}
-/**
- * @brief Blocking receive of size * bytes.
- *
- * @return true Receive success.
- * @return false Receive failed.
- */
-static inline bool receive_blocking(uint8_t* destination, const size_t size) {
+inline bool serial_transport_receive_blocking(uint8_t* destination, const size_t size) {
bool success = (size_t)chnRead(serial_driver, destination, size) == size;
return success;
}
@@ -243,86 +212,12 @@ __attribute__((weak, nonnull)) void usart_slave_init(QMKSerialDriver** driver) {
usart_init();
}
-/**
- * @brief This thread runs on the slave and responds to transactions initiated
- * by the master.
- */
-static THD_WORKING_AREA(waSlaveThread, 1024);
-static THD_FUNCTION(SlaveThread, arg) {
- (void)arg;
- chRegSetThreadName("usart_tx_rx");
-
- while (true) {
- if (unlikely(!react_to_transactions())) {
- /* Clear the receive queue, to start with a clean slate.
- * Parts of failed transactions or spurious bytes could still be in it. */
- usart_clear();
- }
- split_shared_memory_unlock();
- }
-}
-
-/**
- * @brief Slave specific initializations.
- */
-void soft_serial_target_init(void) {
+void serial_transport_driver_slave_init(void) {
usart_slave_init(&serial_driver);
-
usart_driver_start();
-
- /* Start transport thread. */
- chThdCreateStatic(waSlaveThread, sizeof(waSlaveThread), HIGHPRIO, SlaveThread, NULL);
-}
-
-/**
- * @brief React to transactions started by the master.
- */
-static inline bool react_to_transactions(void) {
- /* Wait until there is a transaction for us. */
- uint8_t sstd_index = 0;
- receive_blocking(&sstd_index, sizeof(sstd_index));
-
- /* Sanity check that we are actually responding to a valid transaction. */
- if (unlikely(sstd_index >= NUM_TOTAL_TRANSACTIONS)) {
- return false;
- }
-
- split_shared_memory_lock();
- split_transaction_desc_t* trans = &split_transaction_table[sstd_index];
-
- /* Send back the handshake which is XORed as a simple checksum,
- to signal that the slave is ready to receive possible transaction buffers */
- sstd_index ^= HANDSHAKE_MAGIC;
- if (unlikely(!send(&sstd_index, sizeof(sstd_index)))) {
- return false;
- }
-
- /* Receive transaction buffer from the master. If this transaction requires it.*/
- if (trans->initiator2target_buffer_size) {
- if (unlikely(!receive(split_trans_initiator2target_buffer(trans), trans->initiator2target_buffer_size))) {
- return false;
- }
- }
-
- /* Allow any slave processing to occur. */
- if (trans->slave_callback) {
- trans->slave_callback(trans->initiator2target_buffer_size, split_trans_initiator2target_buffer(trans), trans->initiator2target_buffer_size, split_trans_target2initiator_buffer(trans));
- }
-
- /* Send transaction buffer to the master. If this transaction requires it. */
- if (trans->target2initiator_buffer_size) {
- if (unlikely(!send(split_trans_target2initiator_buffer(trans), trans->target2initiator_buffer_size))) {
- return false;
- }
- }
-
- return true;
}
-/**
- * @brief Master specific initializations.
- */
-void soft_serial_initiator_init(void) {
+void serial_transport_driver_master_init(void) {
usart_master_init(&serial_driver);
#if defined(MCU_STM32) && defined(SERIAL_USART_PIN_SWAP)
@@ -331,69 +226,3 @@ void soft_serial_initiator_init(void) {
usart_driver_start();
}
-
-/**
- * @brief Start transaction from the master half to the slave half.
- *
- * @param index Transaction Table index of the transaction to start.
- * @return bool Indicates success of transaction.
- */
-bool soft_serial_transaction(int index) {
- /* Clear the receive queue, to start with a clean slate.
- * Parts of failed transactions or spurious bytes could still be in it. */
- usart_clear();
-
- split_shared_memory_lock();
- bool result = initiate_transaction((uint8_t)index);
- split_shared_memory_unlock();
-
- return result;
-}
-
-/**
- * @brief Initiate transaction to slave half.
- */
-static inline bool initiate_transaction(uint8_t sstd_index) {
- /* Sanity check that we are actually starting a valid transaction. */
- if (unlikely(sstd_index >= NUM_TOTAL_TRANSACTIONS)) {
- dprintln("USART: Illegal transaction Id.");
- return false;
- }
-
- split_transaction_desc_t* trans = &split_transaction_table[sstd_index];
-
- /* Send transaction table index to the slave, which doubles as basic handshake token. */
- if (unlikely(!send(&sstd_index, sizeof(sstd_index)))) {
- dprintln("USART: Send Handshake failed.");
- return false;
- }
-
- uint8_t sstd_index_shake = 0xFF;
-
- /* Which we always read back first so that we can error out correctly.
- * - due to the half duplex limitations on return codes, we always have to read *something*.
- * - without the read, write only transactions *always* succeed, even during the boot process where the slave is not ready.
- */
- if (unlikely(!receive(&sstd_index_shake, sizeof(sstd_index_shake)) || (sstd_index_shake != (sstd_index ^ HANDSHAKE_MAGIC)))) {
- dprintln("USART: Handshake failed.");
- return false;
- }
-
- /* Send transaction buffer to the slave. If this transaction requires it. */
- if (trans->initiator2target_buffer_size) {
- if (unlikely(!send(split_trans_initiator2target_buffer(trans), trans->initiator2target_buffer_size))) {
- dprintln("USART: Send failed.");
- return false;
- }
- }
-
- /* Receive transaction buffer from the slave. If this transaction requires it. */
- if (trans->target2initiator_buffer_size) {
- if (unlikely(!receive(split_trans_target2initiator_buffer(trans), trans->target2initiator_buffer_size))) {
- dprintln("USART: Receive failed.");
- return false;
- }
- }
-
- return true;
-}
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-06 23:37:11 +0000