diff options
Diffstat (limited to 'platforms/chibios/drivers/analog.c')
| -rw-r--r-- | platforms/chibios/drivers/analog.c | 21 |
1 files changed, 15 insertions, 6 deletions
diff --git a/platforms/chibios/drivers/analog.c b/platforms/chibios/drivers/analog.c index 8b03e73849..a8ce21bb6d 100644 --- a/platforms/chibios/drivers/analog.c +++ b/platforms/chibios/drivers/analog.c @@ -22,8 +22,8 @@ # error "You need to set HAL_USE_ADC to TRUE in your halconf.h to use the ADC." #endif -#if !STM32_ADC_USE_ADC1 && !STM32_ADC_USE_ADC2 && !STM32_ADC_USE_ADC3 && !STM32_ADC_USE_ADC4 && !WB32_ADC_USE_ADC1 -# error "You need to set one of the 'STM32_ADC_USE_ADCx' settings to TRUE in your mcuconf.h to use the ADC." +#if !RP_ADC_USE_ADC1 && !STM32_ADC_USE_ADC1 && !STM32_ADC_USE_ADC2 && !STM32_ADC_USE_ADC3 && !STM32_ADC_USE_ADC4 && !WB32_ADC_USE_ADC1 +# error "You need to set one of the 'xxx_ADC_USE_ADCx' settings to TRUE in your mcuconf.h to use the ADC." #endif #if STM32_ADC_DUAL_MODE @@ -42,7 +42,7 @@ #endif // BODGE to make v2 look like v1,3 and 4 -#ifdef USE_ADCV2 +#if defined(USE_ADCV2) || defined(RP2040) # if !defined(ADC_SMPR_SMP_1P5) && defined(ADC_SAMPLE_3) # define ADC_SMPR_SMP_1P5 ADC_SAMPLE_3 # define ADC_SMPR_SMP_7P5 ADC_SAMPLE_15 @@ -74,7 +74,7 @@ /* User configurable ADC options */ #ifndef ADC_COUNT -# if defined(STM32F0XX) || defined(STM32F1XX) || defined(STM32F4XX) || defined(GD32VF103) || defined(WB32F3G71xx) || defined(WB32FQ95xx) +# if defined(RP2040) || defined(STM32F0XX) || defined(STM32F1XX) || defined(STM32F4XX) || defined(GD32VF103) || defined(WB32F3G71xx) || defined(WB32FQ95xx) # define ADC_COUNT 1 # elif defined(STM32F3XX) # define ADC_COUNT 4 @@ -126,6 +126,8 @@ static ADCConversionGroup adcConversionGroup = { # endif .smpr2 = ADC_SMPR2_SMP_AN0(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN1(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN2(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN3(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN4(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN5(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN6(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN7(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN8(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN9(ADC_SAMPLING_RATE), .smpr1 = ADC_SMPR1_SMP_AN10(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN11(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN12(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN13(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN14(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN15(ADC_SAMPLING_RATE), +#elif defined(RP2040) +// RP2040 does not have any extra config here #else .cfgr = ADC_CFGR_CONT | ADC_RESOLUTION, .smpr = {ADC_SMPR1_SMP_AN0(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN1(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN2(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN3(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN4(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN5(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN6(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN7(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN8(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN9(ADC_SAMPLING_RATE), ADC_SMPR2_SMP_AN10(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN11(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN12(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN13(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN14(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN15(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN16(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN17(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN18(ADC_SAMPLING_RATE)}, @@ -238,6 +240,11 @@ __attribute__((weak)) adc_mux pinToMux(pin_t pin) { case C5: return TO_MUX( ADC_CHANNEL_IN15, 0 ); // STM32F103x[C-G] in 144-pin packages also have analog inputs on F6...F10, but they are on ADC3, and the // ChibiOS ADC driver for STM32F1xx currently supports only ADC1, therefore these pins are not usable. +#elif defined(RP2040) + case 26U: return TO_MUX(0, 0); + case 27U: return TO_MUX(1, 0); + case 28U: return TO_MUX(2, 0); + case 29U: return TO_MUX(3, 0); #endif } @@ -248,7 +255,7 @@ __attribute__((weak)) adc_mux pinToMux(pin_t pin) { static inline ADCDriver* intToADCDriver(uint8_t adcInt) { switch (adcInt) { -#if STM32_ADC_USE_ADC1 || WB32_ADC_USE_ADC1 +#if RP_ADC_USE_ADC1 || STM32_ADC_USE_ADC1 || WB32_ADC_USE_ADC1 case 0: return &ADCD1; #endif @@ -296,6 +303,8 @@ int16_t adc_read(adc_mux mux) { adcConversionGroup.chselr = 1 << mux.input; /*no macro to convert N to ADC_CHSELR_CHSEL1*/ #elif defined(USE_ADCV2) adcConversionGroup.sqr3 = ADC_SQR3_SQ1_N(mux.input); +#elif defined(RP2040) + adcConversionGroup.channel_mask = 1 << mux.input; #else adcConversionGroup.sqr[0] = ADC_SQR1_SQ1_N(mux.input); #endif @@ -310,7 +319,7 @@ int16_t adc_read(adc_mux mux) { return 0; } -#ifdef USE_ADCV2 +#if defined(USE_ADCV2) || defined(RP2040) // fake 12-bit -> N-bit scale return (*sampleBuffer) >> (12 - ADC_RESOLUTION); #else |