diff options
Diffstat (limited to 'platforms/chibios/boards/BONSAI_C4/configs/config.h')
| -rw-r--r-- | platforms/chibios/boards/BONSAI_C4/configs/config.h | 92 |
1 files changed, 92 insertions, 0 deletions
diff --git a/platforms/chibios/boards/BONSAI_C4/configs/config.h b/platforms/chibios/boards/BONSAI_C4/configs/config.h new file mode 100644 index 0000000000..e412f73d3d --- /dev/null +++ b/platforms/chibios/boards/BONSAI_C4/configs/config.h @@ -0,0 +1,92 @@ +/* Copyright 2022 David Hoelscher, customMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + */ +#pragma once + +// Bonsai C4 includes Vbus sensing; derived designs that use PA9 for other purposes +// may disable Vbus sensing with #define BOARD_OTG_NOVBUSSENS 1 + +#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP +# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE +#endif + +// FRAM configuration +#ifndef EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN +# define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN PAL_LINE(GPIOA, 0) +# define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 8 // 96MHz / 8 = 12MHz; max supported by MB85R64 is 20MHz +# define EXTERNAL_EEPROM_BYTE_COUNT 8192 +# define EXTERNAL_EEPROM_PAGE_SIZE 64 // does not matter for FRAM, just sets the RAM buffer size in STM32F chip +# define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 8191 +#endif + +// External flash configuration +#ifndef EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN +# define EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN PAL_LINE(GPIOB, 12) +# define EXTERNAL_FLASH_SPI_CLOCK_DIVISOR 2 // 48MHz; max supported by W25Q128JV is 133MHz +# define EXTERNAL_FLASH_BYTE_COUNT (16 * 1024 * 1024) //128Mbit or 16MByte +# define EXTERNAL_FLASH_PAGE_SIZE 256 +# define EXTERNAL_FLASH_SPI_TIMEOUT 200000 //datasheet max is 200 seconds for flash chip erase +#endif + +// SPI Configuration (needed for FRAM and FLASH) +#ifndef SPI_DRIVER +# define SPI_DRIVER SPID1 +#endif +#ifndef SPI_SCK_PIN +# define SPI_SCK_PIN PAL_LINE(GPIOB, 3) +#endif +#ifndef SPI_MOSI_PIN +# define SPI_MOSI_PIN PAL_LINE(GPIOB, 5) +#endif +#ifndef SPI_MISO_PIN +# define SPI_MISO_PIN PAL_LINE(GPIOB, 4) +#endif + + +// I2C Configuration +#ifdef CONVERT_TO_BONSAI_C4 +# ifndef I2C1_SCL_PIN +# define I2C1_SCL_PIN PAL_LINE(GPIOB, 6) +# endif +# ifndef I2C1_SDA_PIN +# define I2C1_SDA_PIN PAL_LINE(GPIOB, 9) +# endif +#endif + +// WS2812-style LED control on pin A10 +#ifdef WS2812_DRIVER_PWM +# ifndef RGB_DI_PIN +# define RGB_DI_PIN PAL_LINE(GPIOA, 10) +# endif +# ifndef WS2812_PWM_DRIVER +# define WS2812_PWM_DRIVER PWMD1 +# endif +# ifndef WS2812_PWM_CHANNEL +# define WS2812_PWM_CHANNEL 3 +# endif +# ifndef WS2812_PWM_PAL_MODE +# define WS2812_PWM_PAL_MODE 1 +# endif +# ifndef WS2812_DMA_STREAM +# define WS2812_DMA_STREAM STM32_DMA2_STREAM5 +# endif +# ifndef WS2812_DMA_CHANNEL +# define WS2812_DMA_CHANNEL 6 +# endif +#endif + +#ifndef USB_VBUS_PIN +# define USB_VBUS_PIN PAL_LINE(GPIOA, 9) +#endif
\ No newline at end of file |