summaryrefslogtreecommitdiff
path: root/m0110_usb
diff options
context:
space:
mode:
Diffstat (limited to 'm0110_usb')
-rw-r--r--m0110_usb/Makefile52
-rw-r--r--m0110_usb/README55
-rw-r--r--m0110_usb/config.h62
-rwxr-xr-xm0110_usb/doc/m0110.jpgbin0 -> 49360 bytes
-rwxr-xr-xm0110_usb/doc/teensy.jpgbin0 -> 50081 bytes
-rw-r--r--m0110_usb/keymap.c118
-rw-r--r--m0110_usb/led.c24
-rw-r--r--m0110_usb/matrix.c193
8 files changed, 504 insertions, 0 deletions
diff --git a/m0110_usb/Makefile b/m0110_usb/Makefile
new file mode 100644
index 0000000000..8c8460c806
--- /dev/null
+++ b/m0110_usb/Makefile
@@ -0,0 +1,52 @@
+# Target file name (without extension).
+TARGET = m0110
+
+# Directory common source filess exist
+COMMON_DIR = ..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC = main.c \
+ keymap.c \
+ matrix.c \
+ led.c \
+ m0110.c
+
+CONFIG_H = config.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162 # Teensy 1.0
+MCU = atmega32u4 # Teensy 2.0
+#MCU = at90usb646 # Teensy++ 1.0
+#MCU = at90usb1286 # Teensy++ 2.0
+
+
+# Processor frequency.
+# Normally the first thing your program should do is set the clock prescaler,
+# so your program will run at the correct speed. You should also set this
+# variable to same clock speed. The _delay_ms() macro uses this, and many
+# examples use this variable to calculate timings. Do not add a "UL" here.
+F_CPU = 16000000
+
+
+# Build Options
+# *Comment out* to disable the options.
+#
+#MOUSEKEY_ENABLE = yes # Mouse keys
+#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
+#EXTRAKEY_ENABLE = yes # Audio control and System control
+#NKRO_ENABLE = yes # USB Nkey Rollover
+
+
+
+#---------------- Programming Options --------------------------
+PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+
+
+
+include $(COMMON_DIR)/pjrc.mk
+include $(COMMON_DIR)/common.mk
diff --git a/m0110_usb/README b/m0110_usb/README
new file mode 100644
index 0000000000..4122edb287
--- /dev/null
+++ b/m0110_usb/README
@@ -0,0 +1,55 @@
+M0110 to USB keyboard converter
+===============================
+This firmware converts protocol for Apple Machintosh Keybard M0110.
+
+
+Connection
+----------
+You need 4P4C plug and cable to connect Teensy into M0110.
+Teensy port F0 is assigned for CLOCK line and F1 for DATA by default, you can change pin configuration with editing config.h..
+
+Plug:
+ http://en.wikipedia.org/wiki/Modular_connector#4P4C
+
+Pinout:
+ http://www.kbdbabel.org/conn/kbd_connector_macplus.png
+ 1(Black): GND
+ 2(Red): CLOCK
+ 3(Green): DATA
+ 4(Yellow): +5V
+
+
+
+Build Frimware
+--------------
+Optionally edit Makefile and config.h for build options, pin configuration or MCU.
+
+$ cd m0110_usb
+$ make
+and program your Teensy with loader.
+
+
+
+Keymap
+------
+You can change a keymap by editing code of keymap.c like following.
+How to define the keymap is probably obvious. You can find key symbols in usb_keycodes.h.
+
+This is a default keymap for M0110.
+,---------------------------------------------------------.
+| `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Bacpa|
+|---------------------------------------------------------|
+|Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \|
+|---------------------------------------------------------|
+|CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return|
+|---------------------------------------------------------|
+|Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift |
+`---------------------------------------------------------'
+ |Opt|Alt | Space |Alt |Opt|
+ `-----------------------------------------------'
+
+
+Notes
+-----
+
+EOF
diff --git a/m0110_usb/config.h b/m0110_usb/config.h
new file mode 100644
index 0000000000..c12e0738da
--- /dev/null
+++ b/m0110_usb/config.h
@@ -0,0 +1,62 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+/* controller configuration */
+#include "controller_teensy.h"
+
+
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0110
+#define MANUFACTURER t.m.k.
+#define PRODUCT M0110 keyboard converter
+#define DESCRIPTION convert M0110 keyboard to USB
+
+
+/* matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 8
+
+/* Locking Caps Lock support */
+//#define MATRIX_HAS_LOCKING_CAPS
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_LCTRL) | MOD_BIT(KB_LALT) | MOD_BIT(KB_LGUI)) || \
+ keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)) \
+)
+
+
+/* mouse keys */
+#ifdef MOUSEKEY_ENABLE
+# define MOUSEKEY_DELAY_TIME 192
+#endif
+
+
+/* ports */
+#define M0110_CLOCK_PORT PORTF
+#define M0110_CLOCK_PIN PINF
+#define M0110_CLOCK_DDR DDRF
+#define M0110_CLOCK_BIT 0
+#define M0110_DATA_PORT PORTF
+#define M0110_DATA_PIN PINF
+#define M0110_DATA_DDR DDRF
+#define M0110_DATA_BIT 1
+
+#endif
diff --git a/m0110_usb/doc/m0110.jpg b/m0110_usb/doc/m0110.jpg
new file mode 100755
index 0000000000..ef9a123abc
--- /dev/null
+++ b/m0110_usb/doc/m0110.jpg
Binary files differ
diff --git a/m0110_usb/doc/teensy.jpg b/m0110_usb/doc/teensy.jpg
new file mode 100755
index 0000000000..96e93e7e24
--- /dev/null
+++ b/m0110_usb/doc/teensy.jpg
Binary files differ
diff --git a/m0110_usb/keymap.c b/m0110_usb/keymap.c
new file mode 100644
index 0000000000..24fe6cd472
--- /dev/null
+++ b/m0110_usb/keymap.c
@@ -0,0 +1,118 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * Keymap for ADB keyboard
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/pgmspace.h>
+#include "usb_keyboard.h"
+#include "usb_keycodes.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "keymap.h"
+
+
+#define KEYCODE(layer, row, col) (pgm_read_byte(&keymaps[(layer)][(row)][(col)]))
+
+// Convert physical keyboard layout to matrix array.
+// This is a macro to define keymap easily in keyboard layout form.
+// TODO: layout for M0110A
+/* M0110 */
+#define KEYMAP( \
+ K32,K12,K13,K14,K15,K17,K16,K1A,K1C,K19,K1D,K1B,K18,K33, \
+ K30,K0C,K0D,K0E,K0F,K11,K10,K20,K22,K1F,K23,K21,K1E,K2A, \
+ K39,K00,K01,K02,K03,K05,K04,K26,K28,K25,K29,K27, K24, \
+ K38,K06,K07,K08,K09,K0B,K2D,K2E,K2B,K2F,K2C, \
+ K3A,K37, K31, K34 \
+) { \
+ { KB_##K00, KB_##K01, KB_##K02, KB_##K03, KB_##K04, KB_##K05, KB_##K06, KB_##K07 }, \
+ { KB_##K08, KB_##K09, KB_NO, KB_##K0B, KB_##K0C, KB_##K0D, KB_##K0E, KB_##K0F }, \
+ { KB_##K10, KB_##K11, KB_##K12, KB_##K13, KB_##K14, KB_##K15, KB_##K16, KB_##K17 }, \
+ { KB_##K18, KB_##K19, KB_##K1A, KB_##K1B, KB_##K1C, KB_##K1D, KB_##K1E, KB_##K1F }, \
+ { KB_##K20, KB_##K21, KB_##K22, KB_##K23, KB_##K24, KB_##K25, KB_##K26, KB_##K27 }, \
+ { KB_##K28, KB_##K29, KB_##K2A, KB_##K2B, KB_##K2C, KB_##K2D, KB_##K2E, KB_##K2F }, \
+ { KB_##K30, KB_##K31, KB_##K32, KB_##K33, KB_##K34, KB_NO, KB_NO, KB_##K37 }, \
+ { KB_##K38, KB_##K39, KB_##K3A, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO } \
+}
+
+
+// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
+static const uint8_t PROGMEM fn_layer[] = {
+ 0, // Fn0
+ 0, // Fn1
+ 0, // Fn2
+ 0, // Fn3
+ 0, // Fn4
+ 0, // Fn5
+ 0, // Fn6
+ 0 // Fn7
+};
+
+// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
+// See layer.c for details.
+static const uint8_t PROGMEM fn_keycode[] = {
+ KB_NO, // Fn0
+ KB_NO, // Fn1
+ KB_NO, // Fn2
+ KB_NO, // Fn3
+ KB_NO, // Fn4
+ KB_NO, // Fn5
+ KB_NO, // Fn6
+ KB_NO // Fn7
+};
+
+static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Default Layer: plain keymap
+ * ,---------------------------------------------------------.
+ * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Bacpa|
+ * |---------------------------------------------------------|
+ * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \|
+ * |---------------------------------------------------------|
+ * |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return|
+ * |---------------------------------------------------------|
+ * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift |
+ * `---------------------------------------------------------'
+ * |Opt|Alt | Space |Alt |Opt|
+ * `-----------------------------------------------'
+ */
+ KEYMAP(
+ GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC,
+ TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS,
+ CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT,
+ LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH,
+ LGUI,LALT, SPC, RALT
+ ),
+};
+
+
+uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
+{
+ return KEYCODE(layer, row, col);
+}
+
+uint8_t keymap_fn_layer(uint8_t fn_bits)
+{
+ return pgm_read_byte(&fn_layer[biton(fn_bits)]);
+}
+
+uint8_t keymap_fn_keycode(uint8_t fn_bits)
+{
+ return pgm_read_byte(&fn_keycode[(biton(fn_bits))]);
+}
diff --git a/m0110_usb/led.c b/m0110_usb/led.c
new file mode 100644
index 0000000000..f76545f0ba
--- /dev/null
+++ b/m0110_usb/led.c
@@ -0,0 +1,24 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "stdint.h"
+#include "led.h"
+
+
+void led_set(uint8_t usb_led)
+{
+}
diff --git a/m0110_usb/matrix.c b/m0110_usb/matrix.c
new file mode 100644
index 0000000000..f045920ccd
--- /dev/null
+++ b/m0110_usb/matrix.c
@@ -0,0 +1,193 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "util.h"
+#include "debug.h"
+#include "host.h"
+#include "led.h"
+#include "m0110.h"
+#include "matrix.h"
+
+
+#define CAPS 0x39
+#define CAPS_UP (CAPS | 0x80)
+#define ROW(key) ((key)>>3&0x0F)
+#define COL(key) ((key)&0x07)
+
+
+static bool is_modified = false;
+
+// matrix state buffer(1:on, 0:off)
+static uint8_t *matrix;
+static uint8_t _matrix0[MATRIX_ROWS];
+
+#ifdef MATRIX_HAS_GHOST
+static bool matrix_has_ghost_in_row(uint8_t row);
+#endif
+static void register_key(uint8_t key);
+
+
+inline
+uint8_t matrix_rows(void)
+{
+ return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+ return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+ print_enable = true;
+ debug_enable = true;
+ debug_matrix = false;
+ debug_keyboard = false;
+ debug_mouse = false;
+ print("debug enabled.\n");
+
+ m0110_init();
+ // initialize matrix state: all keys off
+ for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix0[i] = 0x00;
+ matrix = _matrix0;
+ return;
+}
+
+uint8_t matrix_scan(void)
+{
+ uint8_t key;
+
+ is_modified = false;
+ key = m0110_recv_key();
+
+#ifdef MATRIX_HAS_LOCKING_CAPS
+ // Send Caps key up event
+ if (matrix_is_on(ROW(CAPS), COL(CAPS))) {
+ is_modified = true;
+ register_key(CAPS_UP);
+ }
+#endif
+ if (key == M0110_NULL) {
+ return 0;
+ } else {
+#ifdef MATRIX_HAS_LOCKING_CAPS
+ if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) {
+ // CAPS LOCK on:
+ // Ignore LockingCaps key down event
+ if (key == CAPS) return 0;
+ // Convert LockingCaps key up event into down event
+ if (key == CAPS_UP) key = CAPS;
+ } else {
+ // CAPS LOCK off:
+ // Ignore LockingCaps key up event
+ if (key == CAPS_UP) return 0;
+ }
+#endif
+ is_modified = true;
+ register_key(key);
+ }
+
+ if (debug_enable) {
+ print("key: "); phex(key); print("\n");
+ }
+ return 1;
+}
+
+bool matrix_is_modified(void)
+{
+ return is_modified;
+}
+
+inline
+bool matrix_has_ghost(void)
+{
+#ifdef MATRIX_HAS_GHOST
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ if (matrix_has_ghost_in_row(i))
+ return true;
+ }
+#endif
+ return false;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+ return (matrix[row] & (1<<col));
+}
+
+inline
+uint8_t matrix_get_row(uint8_t row)
+{
+ return matrix[row];
+}
+
+void matrix_print(void)
+{
+ print("\nr/c 01234567\n");
+ for (uint8_t row = 0; row < matrix_rows(); row++) {
+ phex(row); print(": ");
+ pbin_reverse(matrix_get_row(row));
+ print("\n");
+ }
+}
+
+uint8_t matrix_key_count(void)
+{
+ uint8_t count = 0;
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ count += bitpop(matrix[i]);
+ }
+ return count;
+}
+
+#ifdef MATRIX_HAS_GHOST
+inline
+static bool matrix_has_ghost_in_row(uint8_t row)
+{
+ // no ghost exists in case less than 2 keys on
+ if (((matrix[row] - 1) & matrix[row]) == 0)
+ return false;
+
+ // ghost exists in case same state as other row
+ for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+ if (i != row && (matrix[i] & matrix[row]) == matrix[row])
+ return true;
+ }
+ return false;
+}
+#endif
+
+inline
+static void register_key(uint8_t key)
+{
+ if (key&0x80) {
+ matrix[ROW(key)] &= ~(1<<COL(key));
+ } else {
+ matrix[ROW(key)] |= (1<<COL(key));
+ }
+}