summaryrefslogtreecommitdiff
path: root/m0110_usb/README.md
diff options
context:
space:
mode:
Diffstat (limited to 'm0110_usb/README.md')
-rw-r--r--m0110_usb/README.md124
1 files changed, 0 insertions, 124 deletions
diff --git a/m0110_usb/README.md b/m0110_usb/README.md
deleted file mode 100644
index 0ad3631f7c..0000000000
--- a/m0110_usb/README.md
+++ /dev/null
@@ -1,124 +0,0 @@
-M0110/M0110A to USB keyboard converter
-======================================
-This firmware converts the protocol of Apple Macintosh keyboard M0110/M0110A into USB.
-Target board of this project is [PJRC Teensy](http://www.pjrc.com/teensy/), though,
-you can use other board with USB AVR like `ATmega32U4` and `AT90USB`.
-
-![M0110](https://github.com/tmk/tmk_keyboard/raw/master/m0110_usb/doc/m0110.jpg)
-
-M0110A support was contributed by [skagon@github](https://github.com/skagon).
-
-
-
-Connection
-----------
-You need 4P4C plug and cable to connect Teensy or other AVR dev board into the keyboard.
-Teensy port `PF0` is assigned for `CLOCK` line and `PF1` for `DATA` by default,
-you can change pin configuration with editing *config.h*.
-
-You can find 4P4C plugs on telephone handset cable. Note that it is *crossover* connection
-while Macintosh keyboard cable is *straight*.
-
-[![Conection](http://i.imgur.com/vJoVOm.jpg)](http://i.imgur.com/vJoVO.jpg)
-
-In this pic:
-
-1. `GND`(Black)
-2. `CLOCK`(Red)
-3. `DATA`(Green)
-4. `+5V`(Yellow)
-
-Not that wire colors may vary in your cable.
-
-
-### Pinout
-- <http://pinouts.ru/Inputs/MacKeyboard_pinout.shtml>
-- <http://en.wikipedia.org/wiki/Modular_connector#4P4C>
-
-![Jack fig](http://www.kbdbabel.org/conn/kbd_connector_macplus.png)
-
-
-### Pull-up Registor
-You may need pull-up registors on signal lines(`CLOCK`, `DATA`) in particular
-when you have long or coiled cable. 1k-10k Ohm will be OK for this purpose.
-In some cases MCU can't read signal from keyboard correctly without pull-up resistors.
-
-
-
-Building Frimware
------------------
-To compile firmware you need AVR GCC. You can use [WinAVR](http://winavr.sourceforge.net/) on Windows.
-You can edit *Makefile* and *config.h* to change compile options and pin configuration.
-
- $ git clone git://github.com/tmk/tmk_keyboard.git (or download source)
- $ cd m0110_usb
- $ make
-
-and program your Teensy with [PJRC Teensy loader](http://www.pjrc.com/teensy/loader.html).
-
-
-
-Keymap
-------
-You can change keymaps by editing *keymap.c*.
-
-### M0110
-#### *Default*
- ,---------------------------------------------------------.
- | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs|
- |---------------------------------------------------------|
- |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \|
- |---------------------------------------------------------|
- |Fn0 | A| S| D| F| G| H| J| K| L| ;| '|Return|
- |---------------------------------------------------------|
- |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift |
- `---------------------------------------------------------'
- |Ctr|Alt | Space |Gui |Ctr|
- `-----------------------------------------------'
-#### *HHKB/WASD Layer*
- ,---------------------------------------------------------.
- |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet|
- |---------------------------------------------------------|
- |Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up | |Ins|
- |---------------------------------------------------------|
- |Fn0 |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Return|
- |---------------------------------------------------------|
- |Shift |End| |PgD| |VoD|VoU|Mut|End|PgD|Dow|Shift |
- `---------------------------------------------------------'
- |Ctr|Alt | Space |Gui |Ctr|
- `-----------------------------------------------'
-
-### M0110A
-#### *Default*
- ,---------------------------------------------------------. ,---------------.
- | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Gui| =| /| *|
- |---------------------------------------------------------| |---------------|
- |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -|
- |-----------------------------------------------------' | |---------------|
- |Fn0 | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +|
- |---------------------------------------------------------| |---------------|
- |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| |
- |---------------------------------------------------------| |-----------|Ent|
- |Ctrl |Alt | Space | \|Lft|Rgt|Dn | | 0| .| |
- `---------------------------------------------------------' `---------------'
-#### *HHKB/WASD/mousekey Layer*
- ,---------------------------------------------------------. ,---------------.
- |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk|Mb1|Mb3|Mb2|
- |---------------------------------------------------------| |---------------|
- |Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up | | | |MwD|McU|MwU|MwU|
- |-----------------------------------------------------' | |---------------|
- |Fn0 |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Return| |McL|McD|McR|MwD|
- |---------------------------------------------------------| |---------------|
- |Shift |End| |PgD| |VoD|VoU|Mut|End|PgD|Dow|Shif|Up | |MwL|McD|MwR| |
- |---------------------------------------------------------| |-----------|Mb2|
- |Ctrl |Alt | Space |Ins|Lft|Rgt|Dn | | Mb1|Mb3| |
- `---------------------------------------------------------' `---------------'
-
-
-
-Debug
------
-You can use [PJRC HID listen](http://www.pjrc.com/teensy/hid_listen.html) to see debug output.
-
-The converter has some functions for debug, press `Alt+Gui+H` simultaneously to get help.
-These function is totally undocumented, tentative, inconsistent and buggy.