diff options
Diffstat (limited to 'lib/usbhost/USB_Host_Shield_2.0/PS3Enums.h')
| -rw-r--r-- | lib/usbhost/USB_Host_Shield_2.0/PS3Enums.h | 141 |
1 files changed, 141 insertions, 0 deletions
diff --git a/lib/usbhost/USB_Host_Shield_2.0/PS3Enums.h b/lib/usbhost/USB_Host_Shield_2.0/PS3Enums.h new file mode 100644 index 0000000000..77801945f2 --- /dev/null +++ b/lib/usbhost/USB_Host_Shield_2.0/PS3Enums.h @@ -0,0 +1,141 @@ +/* Copyright (C) 2012 Kristian Lauszus, TKJ Electronics. All rights reserved. + + This software may be distributed and modified under the terms of the GNU + General Public License version 2 (GPL2) as published by the Free Software + Foundation and appearing in the file GPL2.TXT included in the packaging of + this file. Please note that GPL2 Section 2[b] requires that all works based + on this software must also be made publicly available under the terms of + the GPL2 ("Copyleft"). + + Contact information + ------------------- + + Kristian Lauszus, TKJ Electronics + Web : http://www.tkjelectronics.com + e-mail : kristianl@tkjelectronics.com + */ + +#ifndef _ps3enums_h +#define _ps3enums_h + +#include "controllerEnums.h" + +/** Size of the output report buffer for the Dualshock and Navigation controllers */ +#define PS3_REPORT_BUFFER_SIZE 48 + +/** Report buffer for all PS3 commands */ +const uint8_t PS3_REPORT_BUFFER[PS3_REPORT_BUFFER_SIZE] PROGMEM = { + 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, + 0xff, 0x27, 0x10, 0x00, 0x32, + 0xff, 0x27, 0x10, 0x00, 0x32, + 0xff, 0x27, 0x10, 0x00, 0x32, + 0xff, 0x27, 0x10, 0x00, 0x32, + 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 +}; + +/** Size of the output report buffer for the Move Controller */ +#define MOVE_REPORT_BUFFER_SIZE 7 + +/** Used to set the LEDs on the controllers */ +const uint8_t PS3_LEDS[] PROGMEM = { + 0x00, // OFF + 0x01, // LED1 + 0x02, // LED2 + 0x04, // LED3 + 0x08, // LED4 + + 0x09, // LED5 + 0x0A, // LED6 + 0x0C, // LED7 + 0x0D, // LED8 + 0x0E, // LED9 + 0x0F, // LED10 +}; + +/** + * Buttons on the controllers. + * <B>Note:</B> that the location is shifted 9 when it's connected via USB. + */ +const uint32_t PS3_BUTTONS[] PROGMEM = { + 0x10, // UP + 0x20, // RIGHT + 0x40, // DOWN + 0x80, // LEFT + + 0x01, // SELECT + 0x08, // START + 0x02, // L3 + 0x04, // R3 + + 0x0100, // L2 + 0x0200, // R2 + 0x0400, // L1 + 0x0800, // R1 + + 0x1000, // TRIANGLE + 0x2000, // CIRCLE + 0x4000, // CROSS + 0x8000, // SQUARE + + 0x010000, // PS + 0x080000, // MOVE - covers 12 bits - we only need to read the top 8 + 0x100000, // T - covers 12 bits - we only need to read the top 8 +}; + +/** + * Analog buttons on the controllers. + * <B>Note:</B> that the location is shifted 9 when it's connected via USB. + */ +const uint8_t PS3_ANALOG_BUTTONS[] PROGMEM = { + 23, // UP_ANALOG + 24, // RIGHT_ANALOG + 25, // DOWN_ANALOG + 26, // LEFT_ANALOG + 0, 0, 0, 0, // Skip SELECT, L3, R3 and START + + 27, // L2_ANALOG + 28, // R2_ANALOG + 29, // L1_ANALOG + 30, // R1_ANALOG + 31, // TRIANGLE_ANALOG + 32, // CIRCLE_ANALOG + 33, // CROSS_ANALOG + 34, // SQUARE_ANALOG + 0, 0, // Skip PS and MOVE + + // Playstation Move Controller + 15, // T_ANALOG - Both at byte 14 (last reading) and byte 15 (current reading) +}; + +enum StatusEnum { + // Note that the location is shifted 9 when it's connected via USB + // Byte location | bit location + Plugged = (38 << 8) | 0x02, + Unplugged = (38 << 8) | 0x03, + + Charging = (39 << 8) | 0xEE, + NotCharging = (39 << 8) | 0xF1, + Shutdown = (39 << 8) | 0x01, + Dying = (39 << 8) | 0x02, + Low = (39 << 8) | 0x03, + High = (39 << 8) | 0x04, + Full = (39 << 8) | 0x05, + + MoveCharging = (21 << 8) | 0xEE, + MoveNotCharging = (21 << 8) | 0xF1, + MoveShutdown = (21 << 8) | 0x01, + MoveDying = (21 << 8) | 0x02, + MoveLow = (21 << 8) | 0x03, + MoveHigh = (21 << 8) | 0x04, + MoveFull = (21 << 8) | 0x05, + + CableRumble = (40 << 8) | 0x10, // Operating by USB and rumble is turned on + Cable = (40 << 8) | 0x12, // Operating by USB and rumble is turned off + BluetoothRumble = (40 << 8) | 0x14, // Operating by Bluetooth and rumble is turned on + Bluetooth = (40 << 8) | 0x16, // Operating by Bluetooth and rumble is turned off +}; + +#endif |