2 files changed, 0 insertions, 109 deletions
diff --git a/lib/lufa b/lib/lufa
new file mode 160000
+Subproject ce10f7642b0459e409839b23cc91498945119b4
diff --git a/lib/lufa/Projects/SerialToLCD/SerialToLCD.txt b/lib/lufa/Projects/SerialToLCD/SerialToLCD.txt
deleted file mode 100644
index a2f3396489..0000000000
--- a/lib/lufa/Projects/SerialToLCD/SerialToLCD.txt
+++ /dev/null
@@ -1,109 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Simon Foster's USB Serial to HD44780 LCD Project
- *
- *  \section Sec_Compat Project Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this project.
- *
- *  \li AT90USB162
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this project.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Communications Device Class (CDC)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>Abstract Control Model (ACM)</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF CDC Class Standard</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Firmware for a USB Virtual Serial to HD44780 LCD controller project, by Simon Foster. This
- *  project connects a standard HD7780 compatible LCD controller to a PC via a virtual serial
- *  link, so that data supplied by the host can be written to the display. This project is
- *  designed to use the Minimum USB AVR board, however it can be modified to suit other hardware
- *  if desired.
- *
- *  LCD Datasheet:    http://www.sparkfun.com/datasheets/LCD/HD44780.pdf \n
- *  More Information: http://en.wikipedia.org/wiki/HD44780_Character_LCD \n
- *
- *  Below are the connections between the AVR Minimus board and LCD.
- *
- *  <table>
- *   <tr>
- *    <td><b>AVR Pin:</b></td>
- *    <td><b>HD44780 LCD Pin:</b></td>
- *   </tr>
- *   <tr>
- *    <td>VCC</td>
- *    <td>VCC</td>
- *   </tr>
- *   <tr>
- *    <td>GND</td>
- *    <td>GND</td>
- *   </tr>
- *   <tr>
- *    <td>PD0</td>
- *    <td>DB4</td>
- *   </tr>
- *   <tr>
- *    <td>PD1</td>
- *    <td>DB5</td>
- *   </tr>
- *   <tr>
- *    <td>PD2</td>
- *    <td>DB6</td>
- *   </tr>
- *   <tr>
- *    <td>PD3</td>
- *    <td>DB7</td>
- *   </tr>
- *   <tr>
- *    <td>PD4</td>
- *    <td>/RS</td>
- *   </tr>
- *   <tr>
- *    <td>GND</td>
- *    <td>/RW</td>
- *   </tr>
- *   <tr>
- *    <td>PD7</td>
- *    <td>/E</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this project, which can control the project behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */