summaryrefslogtreecommitdiff
path: root/layouts/community
diff options
context:
space:
mode:
Diffstat (limited to 'layouts/community')
-rw-r--r--layouts/community/ergodox/drashna/keymap.c13
-rw-r--r--layouts/community/ergodox/drashna/visualizer.c_old (renamed from layouts/community/ergodox/drashna/visualizer.c)0
-rw-r--r--layouts/community/split_3x6_3/drashna/config.h39
-rw-r--r--layouts/community/split_3x6_3/drashna/keymap.c2
4 files changed, 27 insertions, 27 deletions
diff --git a/layouts/community/ergodox/drashna/keymap.c b/layouts/community/ergodox/drashna/keymap.c
index 3e14606060..600e29020d 100644
--- a/layouts/community/ergodox/drashna/keymap.c
+++ b/layouts/community/ergodox/drashna/keymap.c
@@ -19,7 +19,7 @@
#ifdef UNICODEMAP_ENABLE
# include "drashna_unicode.h"
#endif // UNICODEMAP_ENABLE
-
+#include "drivers/sensors/pimoroni_trackball.h"
enum more_custom_keycodes {
KC_SWAP_NUM = NEW_SAFE_RANGE,
PM_SCROLL,
@@ -317,13 +317,14 @@ void shutdown_keymap(void) {
static bool mouse_button_one, trackball_button_one;
-void trackball_check_click(bool pressed, report_mouse_t* mouse) {
- if (mouse_button_one | pressed) {
- mouse->buttons |= MOUSE_BTN1;
+void trackball_register_button(bool pressed, enum mouse_buttons button) {
+ report_mouse_t currentReport = pointing_device_get_report();
+ if (pressed) {
+ currentReport.buttons |= button;
} else {
- mouse->buttons &= ~MOUSE_BTN1;
+ currentReport.buttons &= ~button;
}
- trackball_button_one = pressed;
+ pointing_device_set_report(currentReport);
}
#endif
diff --git a/layouts/community/ergodox/drashna/visualizer.c b/layouts/community/ergodox/drashna/visualizer.c_old
index 6b1c3ff498..6b1c3ff498 100644
--- a/layouts/community/ergodox/drashna/visualizer.c
+++ b/layouts/community/ergodox/drashna/visualizer.c_old
diff --git a/layouts/community/split_3x6_3/drashna/config.h b/layouts/community/split_3x6_3/drashna/config.h
index cc53d4c367..4a094e1954 100644
--- a/layouts/community/split_3x6_3/drashna/config.h
+++ b/layouts/community/split_3x6_3/drashna/config.h
@@ -31,11 +31,11 @@
#ifdef RGBLIGHT_ENABLE
# undef RGBLED_NUM
-# define RGBLED_NUM 27
+# define RGBLED_NUM 27
-# define RGBLIGHT_HUE_STEP 8
-# define RGBLIGHT_SAT_STEP 8
-# define RGBLIGHT_VAL_STEP 5
+# define RGBLIGHT_HUE_STEP 8
+# define RGBLIGHT_SAT_STEP 8
+# define RGBLIGHT_VAL_STEP 5
# define RGBLIGHT_LIMIT_VAL 120
#endif
@@ -44,37 +44,36 @@
# undef RGB_DI_PIN
# define RGB_DI_PIN A3
# endif
-# define RGB_MATRIX_KEYPRESSES // reacts to keypresses
+# define RGB_MATRIX_KEYPRESSES // reacts to keypresses
// # define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
// # define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
# define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
// # define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
// # define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
-# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
-# define RGB_MATRIX_HUE_STEP 8
-# define RGB_MATRIX_SAT_STEP 8
-# define RGB_MATRIX_VAL_STEP 5
-# define RGB_MATRIX_SPD_STEP 10
+# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
+# define RGB_MATRIX_HUE_STEP 8
+# define RGB_MATRIX_SAT_STEP 8
+# define RGB_MATRIX_VAL_STEP 5
+# define RGB_MATRIX_SPD_STEP 10
#endif
#ifdef CONVERT_TO_PROTON_C
-# define WS2812_PWM_DRIVER PWMD2 // default: PWMD2
-# define WS2812_PWM_CHANNEL 4 // default: 2
-# define WS2812_PWM_PAL_MODE 1 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
-# define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
-# define WS2812_DMA_CHANNEL 2 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
-# define WS2812_DMAMUX_ID STM32_DMAMUX1_TIM2_UP // DMAMUX configuration for TIMx_UP -- only required if your MCU has a DMAMUX peripheral, see the respective reference manual for the appropriate values for your MCU.
+# define WS2812_PWM_DRIVER PWMD2 // default: PWMD2
+# define WS2812_PWM_CHANNEL 4 // default: 2
+# define WS2812_PWM_PAL_MODE 1 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
+# define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
+# define WS2812_DMA_CHANNEL 2 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
+# define WS2812_DMAMUX_ID STM32_DMAMUX1_TIM2_UP // DMAMUX configuration for TIMx_UP -- only required if your MCU has a DMAMUX peripheral, see the respective reference manual for the appropriate values for your MCU.
# undef SOFT_SERIAL_PIN
-# define SOFT_SERIAL_PIN D3
-# define SERIAL_USART_DRIVER SD1 // USART driver of TX pin. default: SD1
-# define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
+# define SOFT_SERIAL_PIN D3
+# define SERIAL_USART_DRIVER SD1 // USART driver of TX pin. default: SD1
+# define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
// #define INIT_EE_HANDS_LEFT
// #define INIT_EE_HANDS_RIGHT
#endif
-
#if defined(AUDIO_ENABLE) && !defined(CONVERT_TO_PROTON_C)
# define AUDIO_PIN B6
# define NO_MUSIC_MODE
diff --git a/layouts/community/split_3x6_3/drashna/keymap.c b/layouts/community/split_3x6_3/drashna/keymap.c
index 5a2d2f2e27..e46b626ef9 100644
--- a/layouts/community/split_3x6_3/drashna/keymap.c
+++ b/layouts/community/split_3x6_3/drashna/keymap.c
@@ -114,7 +114,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// clang-format on
#ifdef OLED_DRIVER_ENABLE
-oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+oled_rotation_t oled_init_keymap(oled_rotation_t rotation) {
return OLED_ROTATION_270;
}
#endif