diff options
Diffstat (limited to 'keyboards')
33 files changed, 2635 insertions, 83 deletions
diff --git a/keyboards/ergotravel/config.h b/keyboards/ergotravel/config.h new file mode 100644 index 0000000000..beda546a04 --- /dev/null +++ b/keyboards/ergotravel/config.h @@ -0,0 +1,90 @@ +/* +Copyright 2018 Pierre Constantineau <jpconstantineau@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef REV1_CONFIG_H +#define REV1_CONFIG_H + +#include QMK_KEYBOARD_CONFIG_H + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xCEEB +#define PRODUCT_ID 0x1256 +#define DEVICE_VER 0x0100 +#define MANUFACTURER JPConstantineau.com +#define PRODUCT ErgoTravel Keyboard +#define DESCRIPTION Split 45 percent ergonomic keyboard + +/* key matrix size */ +// Rows are doubled-up +#define MATRIX_ROWS 8 +#define MATRIX_COLS 7 + +// wiring of each half +#define MATRIX_ROW_PINS { C6, D7, E6, B4 } +#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2, B6 } + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +// #define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +#define BACKLIGHT_PIN B5 +#define BACKLIGHT_LEVELS 5 + +/* ws2812 RGB LED */ +#define RGB_DI_PIN D3 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 12 // Number of LEDs +#define ws2812_PORTREG PORTD +#define ws2812_DDRREG DDRD + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +// #define NO_DEBUG + +/* disable print */ +// #define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/ergotravel/ergotravel.c b/keyboards/ergotravel/ergotravel.c new file mode 100644 index 0000000000..2ada434c19 --- /dev/null +++ b/keyboards/ergotravel/ergotravel.c @@ -0,0 +1 @@ +#include "ergotravel.h" diff --git a/keyboards/ergotravel/ergotravel.h b/keyboards/ergotravel/ergotravel.h new file mode 100644 index 0000000000..353000061a --- /dev/null +++ b/keyboards/ergotravel/ergotravel.h @@ -0,0 +1,24 @@ +#ifndef ERGOTRAVEL_H +#define ERGOTRAVEL_H + +#ifdef KEYBOARD_ergotravel_rev1 + #include "rev1.h" +#endif + +#include "quantum.h" + +// Used to create a keymap using only KC_ prefixed keys +#define LAYOUT_kc( \ + L00, L01, L02, L03, L04, L05,L06, R00, R01, R02, R03, R04, R05, R06, \ + L10, L11, L12, L13, L14, L15,L16, R10, R11, R12, R13, R14, R15, R16,\ + L20, L21, L22, L23, L24, L25,L26, R20, R21, R22, R23, R24, R25, R26,\ + L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \ + ) \ + LAYOUT( \ + KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##L06, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, KC_##R06, \ + KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##L16, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, KC_##R16, \ + KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##L26, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, KC_##R26, \ + KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35 \ + ) + +#endif
\ No newline at end of file diff --git a/keyboards/ergotravel/i2c.c b/keyboards/ergotravel/i2c.c new file mode 100644 index 0000000000..084c890c40 --- /dev/null +++ b/keyboards/ergotravel/i2c.c @@ -0,0 +1,162 @@ +#include <util/twi.h> +#include <avr/io.h> +#include <stdlib.h> +#include <avr/interrupt.h> +#include <util/twi.h> +#include <stdbool.h> +#include "i2c.h" + +#ifdef USE_I2C + +// Limits the amount of we wait for any one i2c transaction. +// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is +// 9 bits, a single transaction will take around 90μs to complete. +// +// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit +// poll loop takes at least 8 clock cycles to execute +#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8 + +#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE) + +volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; + +static volatile uint8_t slave_buffer_pos; +static volatile bool slave_has_register_set = false; + +// Wait for an i2c operation to finish +inline static +void i2c_delay(void) { + uint16_t lim = 0; + while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT) + lim++; + + // easier way, but will wait slightly longer + // _delay_us(100); +} + +// Setup twi to run at 100kHz +void i2c_master_init(void) { + // no prescaler + TWSR = 0; + // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10. + // Check datasheets for more info. + TWBR = ((F_CPU/SCL_CLOCK)-16)/2; +} + +// Start a transaction with the given i2c slave address. The direction of the +// transfer is set with I2C_READ and I2C_WRITE. +// returns: 0 => success +// 1 => error +uint8_t i2c_master_start(uint8_t address) { + TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA); + + i2c_delay(); + + // check that we started successfully + if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START)) + return 1; + + TWDR = address; + TWCR = (1<<TWINT) | (1<<TWEN); + + i2c_delay(); + + if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) ) + return 1; // slave did not acknowledge + else + return 0; // success +} + + +// Finish the i2c transaction. +void i2c_master_stop(void) { + TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO); + + uint16_t lim = 0; + while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT) + lim++; +} + +// Write one byte to the i2c slave. +// returns 0 => slave ACK +// 1 => slave NACK +uint8_t i2c_master_write(uint8_t data) { + TWDR = data; + TWCR = (1<<TWINT) | (1<<TWEN); + + i2c_delay(); + + // check if the slave acknowledged us + return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1; +} + +// Read one byte from the i2c slave. If ack=1 the slave is acknowledged, +// if ack=0 the acknowledge bit is not set. +// returns: byte read from i2c device +uint8_t i2c_master_read(int ack) { + TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA); + + i2c_delay(); + return TWDR; +} + +void i2c_reset_state(void) { + TWCR = 0; +} + +void i2c_slave_init(uint8_t address) { + TWAR = address << 0; // slave i2c address + // TWEN - twi enable + // TWEA - enable address acknowledgement + // TWINT - twi interrupt flag + // TWIE - enable the twi interrupt + TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN); +} + +ISR(TWI_vect); + +ISR(TWI_vect) { + uint8_t ack = 1; + switch(TW_STATUS) { + case TW_SR_SLA_ACK: + // this device has been addressed as a slave receiver + slave_has_register_set = false; + break; + + case TW_SR_DATA_ACK: + // this device has received data as a slave receiver + // The first byte that we receive in this transaction sets the location + // of the read/write location of the slaves memory that it exposes over + // i2c. After that, bytes will be written at slave_buffer_pos, incrementing + // slave_buffer_pos after each write. + if(!slave_has_register_set) { + slave_buffer_pos = TWDR; + // don't acknowledge the master if this memory loctaion is out of bounds + if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) { + ack = 0; + slave_buffer_pos = 0; + } + slave_has_register_set = true; + } else { + i2c_slave_buffer[slave_buffer_pos] = TWDR; + BUFFER_POS_INC(); + } + break; + + case TW_ST_SLA_ACK: + case TW_ST_DATA_ACK: + // master has addressed this device as a slave transmitter and is + // requesting data. + TWDR = i2c_slave_buffer[slave_buffer_pos]; + BUFFER_POS_INC(); + break; + + case TW_BUS_ERROR: // something went wrong, reset twi state + TWCR = 0; + default: + break; + } + // Reset everything, so we are ready for the next TWI interrupt + TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN); +} +#endif diff --git a/keyboards/ergotravel/i2c.h b/keyboards/ergotravel/i2c.h new file mode 100644 index 0000000000..43e5969884 --- /dev/null +++ b/keyboards/ergotravel/i2c.h @@ -0,0 +1,49 @@ +#ifndef I2C_H +#define I2C_H + +#include <stdint.h> + +#ifndef F_CPU +#define F_CPU 16000000UL +#endif + +#define I2C_READ 1 +#define I2C_WRITE 0 + +#define I2C_ACK 1 +#define I2C_NACK 0 + +#define SLAVE_BUFFER_SIZE 0x10 + +// i2c SCL clock frequency +#define SCL_CLOCK 100000L + +extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; + +void i2c_master_init(void); +uint8_t i2c_master_start(uint8_t address); +void i2c_master_stop(void); +uint8_t i2c_master_write(uint8_t data); +uint8_t i2c_master_read(int); +void i2c_reset_state(void); +void i2c_slave_init(uint8_t address); + + +static inline unsigned char i2c_start_read(unsigned char addr) { + return i2c_master_start((addr << 1) | I2C_READ); +} + +static inline unsigned char i2c_start_write(unsigned char addr) { + return i2c_master_start((addr << 1) | I2C_WRITE); +} + +// from SSD1306 scrips +extern unsigned char i2c_rep_start(unsigned char addr); +extern void i2c_start_wait(unsigned char addr); +extern unsigned char i2c_readAck(void); +extern unsigned char i2c_readNak(void); +extern unsigned char i2c_read(unsigned char ack); + +#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); + +#endif diff --git a/keyboards/ergotravel/info.json b/keyboards/ergotravel/info.json new file mode 100644 index 0000000000..c92ea720cb --- /dev/null +++ b/keyboards/ergotravel/info.json @@ -0,0 +1,15 @@ +{ + "keyboard_name": "ErgoTravel", + "manufacturer": "jpconstantineau", + "identifier": "0x1256", + "url": "https://github.com/jpconstantineau/ErgoTravel", + "maintainer": "qmk", + "processor": "atmega32u4", + "width": 14.5, + "height": 5, + "layouts": { + "LAYOUT": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":10.5, "y":0}, {"x":11.5, "y":0}, {"x":12.5, "y":0}, {"x":13.5, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":8.5, "y":2}, {"x":9.5, "y":2}, {"x":10.5, "y":2}, {"x":11.5, "y":2}, {"x":12.5, "y":2}, {"x":13.5, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7.5, "y":3}, {"x":8.5, "y":3}, {"x":9.5, "y":3}, {"x":10.5, "y":3}, {"x":11.5, "y":3}, {"x":12.5, "y":3}, {"x":13.5, "y":3}, {"x":4, "y":4}, {"x":5, "y":4}, {"x":6, "y":4}, {"x":7.5, "y":4}, {"x":8.5, "y":4}, {"x":9.5, "y":4}] + } + } +} diff --git a/keyboards/ergotravel/keymaps/ckofy/config.h b/keyboards/ergotravel/keymaps/ckofy/config.h new file mode 100644 index 0000000000..caae080d70 --- /dev/null +++ b/keyboards/ergotravel/keymaps/ckofy/config.h @@ -0,0 +1,46 @@ +/* +Copyright 2017 Pierre Constantineau <jpconstantineau@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "config_common.h" + +/* Use I2C or Serial, not both */ + +//#define USE_SERIAL +#define USE_I2C + +/* Select hand configuration */ + +//#define MASTER_LEFT +#define MASTER_RIGHT +//#define EE_HANDS + +#define TAPPING_TOGGLE 2 + +// required if modifiers are defined in layers besided the default one. +#define PREVENT_STUCK_MODIFIERS + +#undef RGBLED_NUM +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 12 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 + +#endif diff --git a/keyboards/ergotravel/keymaps/ckofy/keymap.c b/keyboards/ergotravel/keymaps/ckofy/keymap.c new file mode 100644 index 0000000000..cc2c33cca3 --- /dev/null +++ b/keyboards/ergotravel/keymaps/ckofy/keymap.c @@ -0,0 +1,202 @@ +#include QMK_KEYBOARD_H + +extern keymap_config_t keymap_config; + +#define _COLEMAK 0 +#define _QWERTY 1 +#define _NUMPAD 2 +#define _LOWER 3 +#define _RAISE 4 +#define _ADJUST 16 + +enum custom_keycodes { + COLEMAK = SAFE_RANGE, + QWERTY, + NUMPAD, + LOWER, + RAISE, + ADJUST, +}; + +/* Fn keys */ + +enum { + + F_SFT = 0, + F_ALT, + F_CTRL, + F_NUMPAD +// F_LOWER, +// F_RAISE, +}; + +#define KC_ KC_TRNS +#define _______ KC_TRNS +#define KC_XXXX KC_NO + +#define KC_CMK COLEMAK +#define KC_QWE QWERTY +#define KC_LOWR LOWER +#define KC_RASE RAISE +#define KC_QRAS QRAISE +#define KC_ADJT ADJUST +#define KC_RST RESET +#define KC_BL_S BL_STEP +#define KC_DBUG DEBUG +#define KC_RTOG RGB_TOG +#define KC_RMOD RGB_MOD +#define KC_RHUI RGB_HUI +#define KC_RHUD RGB_HUD +#define KC_RSAI RGB_SAI +#define KC_RSAD RGB_SAD +#define KC_RVAI RGB_VAI +#define KC_RVAD RGB_VAD +//#define KC_CATDEL LCTL(LALT(KC_DEL)) // Ctrl alt del +#define KC_CPY LCTL(KC_C) +#define KC_PST LCTL(KC_V) +#define KC_SELA LCTL(KC_A) +#define KC_UDO LCTL(KC_Z) +#define KC_CUT LCTL(KC_X) +#define KC_SVE LCTL(KC_S) +#define KC_OSH F(F_SFT) +#define KC_OCTL F(F_CTRL) +#define KC_NUMP F(F_NUMPAD) +#define KC_SHESC MT(MOD_LSFT,KC_ESC) +#define KC_SHENT MT(MOD_RSFT,KC_ENT) +//#define KC_NUMP TG(_NUMPAD) // Toggle layer NUMPAD for use in KC_keymaps +//#define KC_RST RESET + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +// Colemak Mod-DH is used. https://colemakmods.github.io/mod-dh/ + [_COLEMAK] = LAYOUT_kc( + //,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. + TAB , Q , W , F , P , B ,LPRN, RPRN, J , L , U , Y ,SCLN,BSPC, + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + BSPC, A , R , S , T , G ,EQL , MINS, K , N , E , I , O ,QUOT, + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + SHESC, Z , X , C , D , V ,NUMP, ENT, M , H ,COMM,DOT ,SLSH,SHENT, + //|----+----+----+----+----+----+----. .----+----+----+----+----+----+----| + OCTL,LALT,LGUI,DEL ,LOWR, SPC, OSH, RASE,LEFT,RIGHT,RALT,RCTL + //`----+----+----+--+-+----/----/ \----\----+----+----+----+----' + ), + + [_QWERTY] = LAYOUT_kc( + //,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. + ESC , Q , W , E , R , T ,LBRC, RBRC, Y , U , I , O , P ,BSPC, + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + TAB , A , S , D , F , G ,LPRN, RPRN, H , J , K , L ,SCLN,QUOT, + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + LSFT, Z , X , C , V , B , , , N , M ,COMM,DOT ,SLSH,ENT , + //|----+----+----+----+----+----+----. .----+----+----+----+----+----+----| + LCTL,LGUI,LALT,DEL , , SPC, SPC , ,LEFT,DOWN, UP ,RIGHT + //`----+----+----+--+-+----/----/ \----\----+----+----+----+----' + ), + + [_NUMPAD] = LAYOUT_kc( + //,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. + , , , , , , , ,ASTR, P7 , P8 , P9 ,SLSH, , + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + , , , , , , , ,PIPE, P4 , P5 , P6 ,MINS, , + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + , , , , , , , ,COMM, P1 , P2 , P3 ,PLUS, , + //|----+----+----+----+----+----+----. .----+----+----+----+----+----+----| + , , , , , , , P0 ,NLCK, , , + //`----+----+----+--+-+----/----/ \----\----+----+----+----+----' + ), + + [_LOWER] = LAYOUT_kc( + //,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. + ,XXXX,XXXX,XXXX,XXXX,CAPS, , ,PGUP,HOME, UP ,END ,DEL , , + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + ,SELA,LALT,LSFT,LCTL,SVE , , ,PGDN,LEFT,DOWN,RGHT,BSPC,INS , + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + ,UDO ,CUT ,CPY ,PST ,XXXX, , ,XXXX,XXXX,COMM,DOT ,SLSH, , + //|----+----+----+----+----+----+----. .----+----+----+----+----+----+----| + , , , , , , , , , , , + //`----+----+----+--+-+----/----/ \----\----+----+----+----+----' + ), + + [_RAISE] = LAYOUT_kc( + //,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. + ,AMPR,PERC,HASH,EXLM,LPRN, , ,ASTR,RPRN, AT ,DLR ,CIRC,BSPC, + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + , 7 , 5 , 3 , 1 , 9 ,LBRC, RBRC, 8 , 0 , 2 , 4 , 6 ,BSLS, + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + , GRV,TILD,XXXX,EQL ,PLUS, , ,UNDS,MINS,COMM,DOT ,SLSH,ENT , + //|----+----+----+----+----+----+----. .----+----+----+----+----+----+----| + , , , , , , , , , , , + //`----+----+----+--+-+----/----/ \----\----+----+----+----+----' + ), + + + [_ADJUST] = LAYOUT_kc( + //,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. + , F1 , F2 , F3 , F4 , F5 , F6, F7, F8, F9 ,F10 , F11, F12,BSPC, + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + , , , , , , , , , CMK,QWE , , , , + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + , , , , , , , , , , , , , , + //|----+----+----+----+----+----+----. .----+----+----+----+----+----+----| + , , , , , , , , ,VOLD,VOLU,MUTE + //`----+----+----+--+-+----/----/ \----\----+----+----+----+----' + ) + +}; + +const uint16_t PROGMEM fn_actions[] = { + [F_SFT] = ACTION_MODS_ONESHOT (MOD_LSFT) + ,[F_ALT] = ACTION_MODS_ONESHOT (MOD_LALT) + ,[F_CTRL] = ACTION_MODS_ONESHOT (MOD_LCTL) + ,[F_NUMPAD] = ACTION_LAYER_TAP_TOGGLE(_NUMPAD) +// ,[F_LOWER] = ACTION_LAYER_TAP_TOGGLE(LOWER) // FN1 - Momentary Layer 1 (Lower) +// ,[F_RAISE] = ACTION_LAYER_TAP_TOGGLE(RAISE) // FN2 - Momentary Layer 2 (Raise) +}; + + + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case COLEMAK: + if (record->event.pressed) { + set_single_persistent_default_layer(_COLEMAK); + + } + return false; + break; + case QWERTY: + if (record->event.pressed) { + set_single_persistent_default_layer(_QWERTY); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case ADJUST: + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + break; + } + return true; +} diff --git a/keyboards/ergotravel/keymaps/ckofy/rules.mk b/keyboards/ergotravel/keymaps/ckofy/rules.mk new file mode 100644 index 0000000000..457a3d01d4 --- /dev/null +++ b/keyboards/ergotravel/keymaps/ckofy/rules.mk @@ -0,0 +1,3 @@ +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/ergotravel/keymaps/default/config.h b/keyboards/ergotravel/keymaps/default/config.h new file mode 100644 index 0000000000..abb8cfa8e6 --- /dev/null +++ b/keyboards/ergotravel/keymaps/default/config.h @@ -0,0 +1,41 @@ +/* +Copyright 2017 Pierre Constantineau <jpconstantineau@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "config_common.h" + +/* Use I2C or Serial, not both */ + +#define USE_SERIAL +// #define USE_I2C + +/* Select hand configuration */ + +#define MASTER_LEFT +// #define MASTER_RIGHT +// #define EE_HANDS + +#undef RGBLED_NUM +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 12 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 + +#endif diff --git a/keyboards/ergotravel/keymaps/default/keymap.c b/keyboards/ergotravel/keymaps/default/keymap.c new file mode 100644 index 0000000000..ef168a5362 --- /dev/null +++ b/keyboards/ergotravel/keymaps/default/keymap.c @@ -0,0 +1,134 @@ +#include QMK_KEYBOARD_H + +extern keymap_config_t keymap_config; + +#define _QWERTY 0 +#define _LOWER 1 +#define _RAISE 2 +#define _ADJUST 16 + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + LOWER, + RAISE, + ADJUST, +}; + +#define KC_ KC_TRNS +#define _______ KC_TRNS + +#define KC_LOWR LOWER +#define KC_RASE RAISE +#define KC_ADJT ADJUST +#define KC_RST RESET +#define KC_BL_S BL_STEP +#define KC_DBUG DEBUG +#define KC_RTOG RGB_TOG +#define KC_RMOD RGB_MOD +#define KC_RHUI RGB_HUI +#define KC_RHUD RGB_HUD +#define KC_RSAI RGB_SAI +#define KC_RSAD RGB_SAD +#define KC_RVAI RGB_VAI +#define KC_RVAD RGB_VAD + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_QWERTY] = LAYOUT_kc( + //,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. + ESC , Q , W , E , R , T ,LBRC, RBRC, Y , U , I , O , P ,BSPC, + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + TAB , A , S , D , F , G , A, A, H , J , K , L ,SCLN,QUOT, + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + LSFT, Z , X , C , V , B , A, SPC, N , M ,COMM,DOT ,SLSH,ENT , + //|----+----+----+----+----+----+----. .----+----+----+----+----+----+----| + LCTL,LGUI,LALT,ADJT,LOWR,SPC, SPC, RASE,LEFT, UP ,DOWN,RIGHT + //`----+----+----+--+-+----/----/ \----\----+----+----+----+----' + ), + + [_LOWER] = LAYOUT_kc( + //,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. + GRAVE, 1 , 2 , 3 , 4 , 5 , A, B, 6 , 7 , 8 , 9 , 0 ,DEL, + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + TAB , F1 , F2 , F3 , F4 , F5 , F6 , D, Y ,MINS, EQL,LBRC,RBRC,BSLS, + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + LSFT, F7 , F8 , F9 , F10, F11, F12, SPC, N , M ,COMM,DOT ,SLSH,ENT , + //|----+----+----+----+----+----+----. .----+----+----+----+----+----+----| + LCTL,LGUI,LALT,ADJT,LOWR,SPC, SPC, RASE,LEFT, UP ,DOWN,RIGHT + //`----+----+----+--+-+----/----/ \----\----+----+----+----+----' + ), + + [_RAISE] = LAYOUT_kc( + //,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. + ESC , 1 , 2 , 3 , 4 , 5 , A, B, 6 , 7 , 8 , 9 , 0 ,BSPC, + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + TAB , Q , W , E , R , T , C , D, Y , U , I , O , P ,DEL , + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + LSFT, Z , X , C , V , B , A, SPC, N , M ,COMM,DOT ,SLSH,ENT , + //|----+----+----+----+----+----+----. .----+----+----+----+----+----+----| + LCTL,LGUI,LALT,ADJT,LOWR,SPC, SPC, RASE,LEFT, UP ,DOWN,RIGHT + //`----+----+----+--+-+----/----/ \----\----+----+----+----+----' + ), + + [_ADJUST] = LAYOUT_kc( + //,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. + ESC , F1 , F2 , F3 , F4 , F5 , F6, F7, F8, F9 ,F10 , F11, F12,BSPC, + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + TAB , Q , W , E , R , T , C , D, Y , U , I , O , P ,DEL , + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + LSFT, Z , X , C , V , B , A, SPC, N , M ,COMM,DOT ,SLSH,ENT , + //|----+----+----+----+----+----+----. .----+----+----+----+----+----+----| + LCTL,LGUI,LALT,ADJT,LOWR,SPC, SPC, RASE,LEFT, UP ,DOWN,RIGHT + //`----+----+----+--+-+----/----/ \----\----+----+----+----+----' + ) + +}; + + + + + + + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_SONG(tone_qwerty); + #endif + set_single_persistent_default_layer(_QWERTY); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case ADJUST: + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + break; + } + return true; +} diff --git a/keyboards/ergotravel/keymaps/default/rules.mk b/keyboards/ergotravel/keymaps/default/rules.mk new file mode 100644 index 0000000000..457a3d01d4 --- /dev/null +++ b/keyboards/ergotravel/keymaps/default/rules.mk @@ -0,0 +1,3 @@ +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/ergotravel/keymaps/ian/config.h b/keyboards/ergotravel/keymaps/ian/config.h new file mode 100644 index 0000000000..b2e8ca9b5d --- /dev/null +++ b/keyboards/ergotravel/keymaps/ian/config.h @@ -0,0 +1,41 @@ +/* +Copyright 2017 Pierre Constantineau <jpconstantineau@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "config_common.h" + +/* Use I2C or Serial, not both */ + +#define USE_SERIAL +// #define USE_I2C + +/* Select hand configuration */ + +// #define MASTER_LEFT +#define MASTER_RIGHT +// #define EE_HANDS + +#undef RGBLED_NUM +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 12 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 + +#endif diff --git a/keyboards/ergotravel/keymaps/ian/keymap.c b/keyboards/ergotravel/keymaps/ian/keymap.c new file mode 100644 index 0000000000..fd4006d51d --- /dev/null +++ b/keyboards/ergotravel/keymaps/ian/keymap.c @@ -0,0 +1,95 @@ +#include QMK_KEYBOARD_H + +extern keymap_config_t keymap_config; + +enum custom_layers { + _COLEMAK, + _ADJUST, + _RAISE, + _LOWER, + _QWERTY +}; + + + +#define _______ KC_TRNS +#define XXXXXXX KC_NO +#define BASELYR TO(_COLEMAK) // base layer +#define LOWER MO(_LOWER) // momentary lower layer +#define RAISE MO(_RAISE) // momentary raise layer +#define ADJUST MO(_ADJUST) // momentary adjust layer +#define QWERTY TG(_QWERTY) +#define LLOWER TG(_LOWER) // lock for lower layer +#define LRAISE TG(_RAISE) // lock for raise layer +#define LHALF LALT(LGUI(KC_LEFT)) // spec left half screen +#define TLHALF LCTL(LGUI(KC_LEFT)) // spec top left half +#define BLHALF LCTL(LSFT(LGUI(KC_LEFT))) // spec bottom left half +#define RHALF LALT(LGUI(KC_RIGHT)) // spec right half screen +#define TRHALF LCTL(LGUI(KC_RIGHT)) // spec top right half +#define BRHALF LCTL(LSFT(LGUI(KC_RIGHT))) // spec bottom right half +#define SAFBCK LGUI(KC_LBRC) // safari back +#define SAFFWD LGUI(KC_RBRC) // safari forward +#define CENTER LALT(LGUI(KC_C)) // spec center +#define FULL LALT(LGUI(KC_F)) // spec full screen + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_COLEMAK] = LAYOUT( + //,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------. + KC_ESC , KC_Q , KC_W , KC_F , KC_P , KC_G ,KC_LCBR, KC_RCBR, KC_J , KC_L , KC_U , KC_Y ,KC_SCLN,KC_BSPC, + //,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------. + KC_TAB , KC_A , KC_R , KC_S , KC_T , KC_D ,KC_LPRN, KC_RPRN, KC_H , KC_N , KC_E , KC_I , KC_O ,KC_QUOT, + //,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------. + KC_BSLS, KC_Z , KC_X , KC_C , KC_V , KC_B ,KC_LBRC , KC_RBRC , KC_K , KC_M ,KC_COMM, KC_DOT,KC_SLSH,KC_ENT , + //,------+-------+-------+-------+-------+-------+-------. .-------+-------+-------+-------+-------+-------+-------. + ADJUST ,KC_LCTL,KC_LALT,KC_LGUI, LOWER, KC_SPC, KC_LSFT, RAISE, KC_LEFT, KC_DOWN, KC_UP,KC_RGHT + //,------+-------+-------+-------+-------/-------/ \-------\-------+-------+-------+-------+-------' + ), + + [_ADJUST] = LAYOUT( + //,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------. + BASELYR,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, RESET , + //,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------. + XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, + //,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------. + XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, + //|------+-------+-------+-------+-------+-------+-------. .-------+-------+-------+-------+-------+-------+-------. + _______,KC_F10 ,KC_F11 ,KC_F12 ,LLOWER ,XXXXXXX, XXXXXXX,LRAISE ,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX + //`------+-------+-------+-------+-------/-------/ \------\-------+-------+-------+-------+-------' + ), + + [_RAISE] = LAYOUT( + //,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------. + BASELYR,KC_EXLM, KC_AT, KC_HASH, KC_DLR,KC_LCBR,XXXXXXX, XXXXXXX, KC_RCBR, TLHALF, CENTER, TRHALF, XXXXXXX, KC_BSPC, + //,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------. + KC_TILD,KC_PERC,KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,XXXXXXX, XXXXXXX, KC_RPRN, LHALF, FULL, RHALF, XXXXXXX, KC_VOLU, + //,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------. + KC_GRV, KC_MINS,KC_PLUS,KC_UNDS,KC_EQL, KC_LBRC,XXXXXXX, XXXXXXX, KC_RBRC, BLHALF, XXXXXXX, BRHALF, XXXXXXX, KC_VOLD, + //|-------+-------+-------+-------+-------+-------+-------. .-------+-------+-------+-------+-------+-------+-------| + XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,KC_TRNS,KC_SPC, KC_LSFT, KC_TRNS, XXXXXXX, KC_F14, KC_F15, KC_MUTE + //`-------+-------+-------+-------+-------/-------/ \------\-------+-------+-------+-------+-------' + ), + + [_LOWER] = LAYOUT( + //,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------. + BASELYR, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LCBR,XXXXXXX, XXXXXXX, KC_RCBR, KC_7, KC_8, KC_9, KC_MINS, KC_BSPC, + //,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------. + XXXXXXX, XXXXXXX, SAFBCK, XXXXXXX, SAFFWD, KC_LPRN,XXXXXXX, XXXXXXX, KC_RPRN, KC_4, KC_5, KC_6, KC_PLUS, XXXXXXX, + //,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------. + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LBRC,XXXXXXX, XXXXXXX, KC_RBRC, KC_1, KC_2, KC_3, KC_ASTR, KC_ENT, + //|-------+-------+-------+-------+-------+-------+-------. .-------+-------+-------+-------+-------+-------+-------| + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_TRNS, KC_SPC, KC_LSFT, KC_0, KC_0, KC_DOT, KC_SLASH, XXXXXXX + //`-------+-------+-------+-------+-------/-------/ \------\-------+-------+-------+-------+-------' + ) + +}; + + + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + + } + return true; +} + diff --git a/keyboards/ergotravel/keymaps/ian/rules.mk b/keyboards/ergotravel/keymaps/ian/rules.mk new file mode 100644 index 0000000000..457a3d01d4 --- /dev/null +++ b/keyboards/ergotravel/keymaps/ian/rules.mk @@ -0,0 +1,3 @@ +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/ergotravel/keymaps/jpconstantineau/config.h b/keyboards/ergotravel/keymaps/jpconstantineau/config.h new file mode 100644 index 0000000000..abb8cfa8e6 --- /dev/null +++ b/keyboards/ergotravel/keymaps/jpconstantineau/config.h @@ -0,0 +1,41 @@ +/* +Copyright 2017 Pierre Constantineau <jpconstantineau@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "config_common.h" + +/* Use I2C or Serial, not both */ + +#define USE_SERIAL +// #define USE_I2C + +/* Select hand configuration */ + +#define MASTER_LEFT +// #define MASTER_RIGHT +// #define EE_HANDS + +#undef RGBLED_NUM +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 12 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 + +#endif diff --git a/keyboards/ergotravel/keymaps/jpconstantineau/keymap.c b/keyboards/ergotravel/keymaps/jpconstantineau/keymap.c new file mode 100644 index 0000000000..b2374b7115 --- /dev/null +++ b/keyboards/ergotravel/keymaps/jpconstantineau/keymap.c @@ -0,0 +1,129 @@ +#include QMK_KEYBOARD_H + +extern keymap_config_t keymap_config; + +#define _QWERTY 0 +#define _LOWER 1 +#define _RAISE 2 +#define _ADJUST 16 + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + LOWER, + RAISE, + ADJUST, +}; + +#define KC_ KC_TRNS +#define _______ KC_TRNS + +#define KC_LOWR LOWER +#define KC_RASE RAISE +#define KC_ADJT ADJUST +#define KC_RST RESET +#define KC_BL_S BL_STEP +#define KC_DBUG DEBUG +#define KC_RTOG RGB_TOG +#define KC_RMOD RGB_MOD +#define KC_RHUI RGB_HUI +#define KC_RHUD RGB_HUD +#define KC_RSAI RGB_SAI +#define KC_RSAD RGB_SAD +#define KC_RVAI RGB_VAI +#define KC_RVAD RGB_VAD + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_QWERTY] = LAYOUT_kc( + //,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. + ESC , Q , W , E , R , T ,LBRC, RBRC, Y , U , I , O , P ,BSPC, + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + TAB , A , S , D , F , G , A, A, H , J , K , L ,SCLN,QUOT, + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + LSFT, Z , X , C , V , B , A, SPC, N , M ,COMM,DOT ,SLSH,ENT , + //|----+----+----+----+----+----+----. .----+----+----+----+----+----+----| + LCTL,LGUI,LALT,ADJT,LOWR,SPC, SPC, RASE,LEFT, UP ,DOWN,RIGHT + //`----+----+----+--+-+----/----/ \----\----+----+----+----+----' + ), + + [_LOWER] = LAYOUT_kc( + //,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. + GRAVE, 1 , 2 , 3 , 4 , 5 , A, B, 6 , 7 , 8 , 9 , 0 ,DEL, + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + TAB , F1 , F2 , F3 , F4 , F5 , F6 , D, Y ,MINS, EQL,LBRC,RBRC,BSLS, + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + LSFT, F7 , F8 , F9 , F10, F11, F12, SPC, N , M ,COMM,DOT ,SLSH,ENT , + //|----+----+----+----+----+----+----. .----+----+----+----+----+----+----| + LCTL,LGUI,LALT,ADJT,LOWR,SPC, SPC, RASE,LEFT, UP ,DOWN,RIGHT + //`----+----+----+--+-+----/----/ \----\----+----+----+----+----' + ), + + [_RAISE] = LAYOUT_kc( + //,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. + ESC , 1 , 2 , 3 , 4 , 5 , A, B, 6 , 7 , 8 , 9 , 0 ,BSPC, + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + TAB , Q , W , E , R , T , C , D, Y , U , I , O , P ,DEL , + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + LSFT, Z , X , C , V , B , A, SPC, N , M ,COMM,DOT ,SLSH,ENT , + //|----+----+----+----+----+----+----. .----+----+----+----+----+----+----| + LCTL,LGUI,LALT,ADJT,LOWR,SPC, SPC, RASE,LEFT, UP ,DOWN,RIGHT + //`----+----+----+--+-+----/----/ \----\----+----+----+----+----' + ), + + [_ADJUST] = LAYOUT_kc( + //,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. + ESC , F1 , F2 , F3 , F4 , F5 , F6, F7, F8, F9 ,F10 , F11, F12,BSPC, + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + TAB , Q , W , E , R , T , C , D, Y , U , I , O , P ,DEL , + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + LSFT, Z , X , C , V , B , A, SPC, N , M ,COMM,DOT ,SLSH,ENT , + //|----+----+----+----+----+----+----. .----+----+----+----+----+----+----| + LCTL,LGUI,LALT,ADJT,LOWR,SPC, SPC, RASE,LEFT, UP ,DOWN,RIGHT + //`----+----+----+--+-+----/----/ \----\----+----+----+----+----' + ) + +}; + + + + + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + set_single_persistent_default_layer(_QWERTY); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case ADJUST: + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + break; + } + return true; +} diff --git a/keyboards/ergotravel/keymaps/jpconstantineau/rules.mk b/keyboards/ergotravel/keymaps/jpconstantineau/rules.mk new file mode 100644 index 0000000000..457a3d01d4 --- /dev/null +++ b/keyboards/ergotravel/keymaps/jpconstantineau/rules.mk @@ -0,0 +1,3 @@ +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/ergotravel/keymaps/viet/config.h b/keyboards/ergotravel/keymaps/viet/config.h new file mode 100644 index 0000000000..24e95b2b96 --- /dev/null +++ b/keyboards/ergotravel/keymaps/viet/config.h @@ -0,0 +1,42 @@ +/* +Copyright 2017 Pierre Constantineau <jpconstantineau@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "config_common.h" + +/* Use I2C or Serial, not both */ + +#define USE_SERIAL +// #define USE_I2C + +/* Select hand configuration */ + +//#define MASTER_LEFT +#define MASTER_RIGHT +// #define EE_HANDS + +#undef RGBLED_NUM +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 26 +#define RGBLIGHT_HUE_STEP 20 +#define RGBLIGHT_SAT_STEP 20 +#define RGBLIGHT_VAL_STEP 20 +#define RGBLIGHT_LIMIT_VAL 220 + +#endif diff --git a/keyboards/ergotravel/keymaps/viet/keymap.c b/keyboards/ergotravel/keymaps/viet/keymap.c new file mode 100644 index 0000000000..0e3ec074c7 --- /dev/null +++ b/keyboards/ergotravel/keymaps/viet/keymap.c @@ -0,0 +1,327 @@ +#include "ergotravel.h" +#include "action_layer.h" +#include "eeconfig.h" +#include "mousekey.h" +#include "process_unicode.h" +extern keymap_config_t keymap_config; + +#define _QWERTY 0 +#define _NUMBERS 1 +#define _SYMBOLS 2 +#define _CODING 3 +#define _NAVIGATION 4 +#define _ADJUST 16 + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + ADJUST, + CODING_SPACE, + NUMBERS_SPACE, + SYMBOLS_SPACE, + NAVIGATE_SPACE, + TABLE_FLIP, + RESET_TABLE, + SHRUG, + LOOK_OF_DISAPPROVAL +}; + +#define KC_ KC_TRNS +#define _______ KC_TRNS + +#define KC_ADJT MO(_ADJUST) +#define KC_RST RESET +#define KC_BL_S BL_STEP +#define KC_DBUG DEBUG +#define KC_RTOG RGB_TOG +#define KC_RMOD RGB_MOD +#define KC_RHUI RGB_HUI +#define KC_RHUD RGB_HUD +#define KC_RSAI RGB_SAI +#define KC_RSAD RGB_SAD +#define KC_RVAI RGB_VAI +#define KC_RVAD RGB_VAD + +#define KC_RSEN MT(MOD_RSFT, KC_ENT) // Tap for enter, hold for right shift + +#define KC_LCCA MT(MOD_LCTL, KC_CAPS) // Tap for caps lock, hold for left control +#define KC_SHDE MT(MOD_LSFT, KC_DEL) // Tap for delete, hold for left shift + +#define KC_NAVI MO(_NAVIGATION) + +#define KC_COSP CODING_SPACE +#define KC_NUSP NUMBERS_SPACE +#define KC_SYSP SYMBOLS_SPACE +#define KC_NASP NAVIGATE_SPACE + +#define KC_FLIP TABLE_FLIP +#define KC_TSET RESET_TABLE +#define KC_SRUG SHRUG +#define KC_DISA LOOK_OF_DISAPPROVAL +#define KC_RST RESET + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_QWERTY] = LAYOUT_kc( + //,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. + TAB , Q , W , E , R , T ,HOME, PGUP, Y , U , I , O , P ,BSPC, + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + LCCA, A , S , D , F , G ,END , PGDN, H , J , K , L ,SCLN,QUOT, + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + SHDE, Z , X , C , V , B ,LGUI, RALT, N , M ,COMM,DOT ,SLSH,RSEN, + //|----+----+----+----+----+----+----. .----+----+----+----+----+----+----| + ESC ,ADJT,LALT,ENT ,NUSP,NASP, SYSP,COSP,RCTL,NAVI,ADJT,DEL + //`----+----+----+--+-+----/----/ \----\----+----+----+----+----' + ), + + [_NUMBERS] = LAYOUT_kc( + //,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. + GRAVE, 1 , 2 , 3 , 4 , 5 ,MPLY, VOLU, 6 , 7 , 8 , 9 , 0 , , + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + , , , , , ,MNXT, VOLD,FLIP,TSET,SRUG,DISA, , , + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + , , , , , , , , , , , , , , + //|----+----+----+----+----+----+----. .----+----+----+----+----+----+----| + , , , , , , , , , , , + //`----+----+----+--+-+----/----/ \----\----+----+----+----+----' + ), + + [_SYMBOLS] = LAYOUT_kc( + //,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. + GRAVE,EXLM, AT ,HASH,DLR ,PERC,MPLY, VOLU,CIRC,AMPR,ASTR,LPRN,RPRN,BSLS, + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + , , , , , ,MNXT, VOLD, , , , , , , + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + , , , , , , , , , , , , , , + //|----+----+----+----+----+----+----. .----+----+----+----+----+----+----| + , , , , , , , , , , , + //`----+----+----+--+-+----/----/ \----\----+----+----+----+----' + ), + + [_CODING] = LAYOUT_kc( + //,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. + , , ,LCBR,RCBR, ,MPLY, VOLU, ,AMPR,PIPE,DLR , , , + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + , , ,LPRN,RPRN, ,MNXT, VOLD, ,UNDS,MINS,ASTR, , , + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + , , ,LBRC,RBRC, , , , ,PLUS,EQL , , , , + //|----+----+----+----+----+----+----. .----+----+----+----+----+----+----| + , , , , , , , , , , , + //`----+----+----+--+-+----/----/ \----\----+----+----+----+----' + ), + + [_NAVIGATION] = LAYOUT_kc( + //,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. + , , , UP , , ,MPLY, VOLU,WH_U,BTN1,MS_U,BTN1, , , + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + , ,LEFT,DOWN,RGHT, ,MNXT, VOLD,WH_D,MS_L,MS_D,MS_R, , , + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + , , , , , , , , , , , , , , + //|----+----+----+----+----+----+----. .----+----+----+----+----+----+----| + , , , , , , , , , , , + //`----+----+----+--+-+----/----/ \----\----+----+----+----+----' + ), + + [_ADJUST] = LAYOUT_kc( + //,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. + F1 ,F2 ,F3 ,F4 ,F5 ,F6 , , ,F7 ,F8 ,F9 ,F10 ,F11 ,F12 , + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + ,RTOG,RVAI,RHUI,RSAI, , , , , , , , , , + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + ,RMOD,RVAD,RHUD,RSAD, , , ,RST , , , , , , + //|----+----+----+----+----+----+----. .----+----+----+----+----+----+----| + , , , , , , , , , , , + //`----+----+----+--+-+----/----/ \----\----+----+----+----+----' + ) + +}; + + +#ifdef AUDIO_ENABLE +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +#endif + +void persistent_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +uint16_t custom_lt_timer; +keypos_t prv_key_pressed; +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { +// set_unicode_input_mode(UC_LNX); // Linux + set_unicode_input_mode(UC_OSX); // Mac OSX +// set_unicode_input_mode(UC_WIN); // Windows (with registry key, see wiki) + //set_unicode_input_mode(UC_WINC); // Windows (with WinCompose, see wiki) +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + + if(record->event.pressed) prv_key_pressed = record->event.key; + #define IS_KEYPOS_SAME(keyone,keytwo) ((keyone.col==keytwo.col)&&(keyone.row==keytwo.row)) + #define ANOTHER_KEY_PRESSED (!IS_KEYPOS_SAME(prv_key_pressed, record->event.key)) + + inline void tap(uint16_t keycode) { + register_code(keycode); + unregister_code(keycode); + }; + + inline void swapInput(void) { + register_code(KC_LGUI); + tap(KC_SPC); + unregister_code(KC_LGUI); + }; + + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_SONG(tone_qwerty); + #endif + persistent_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case CODING_SPACE: + if (record->event.pressed) { + custom_lt_timer = timer_read(); + layer_on(_CODING); + } else { + layer_off(_CODING); + if (timer_elapsed(custom_lt_timer)<150 && (!ANOTHER_KEY_PRESSED)) { + register_code(KC_SPC); + unregister_code(KC_SPC); + } + } + return false; + break; + case NUMBERS_SPACE: + if (record->event.pressed) { + custom_lt_timer = timer_read(); + layer_on(_NUMBERS); + } else { + layer_off(_NUMBERS); + if (timer_elapsed(custom_lt_timer)<150 && (!ANOTHER_KEY_PRESSED)) { + register_code(KC_SPC); + unregister_code(KC_SPC); + } + } + return false; + break; + case SYMBOLS_SPACE: + if (record->event.pressed) { + custom_lt_timer = timer_read(); + layer_on(_SYMBOLS); + } else { + layer_off(_SYMBOLS); + if (timer_elapsed(custom_lt_timer)<150 && (!ANOTHER_KEY_PRESSED)) { + register_code(KC_SPC); + unregister_code(KC_SPC); + } + } + return false; + break; + case NAVIGATE_SPACE: + if (record->event.pressed) { + custom_lt_timer = timer_read(); + layer_on(_NAVIGATION); + } else { + layer_off(_NAVIGATION); + if (timer_elapsed(custom_lt_timer)<150 && (!ANOTHER_KEY_PRESSED)) { + register_code(KC_SPC); + unregister_code(KC_SPC); + } + } + return false; + break; + case TABLE_FLIP: + if (record->event.pressed) { + swapInput(); + + register_code(KC_RSFT); + tap(KC_9); + unregister_code(KC_RSFT); + process_unicode((0x256F|QK_UNICODE), record); // Arm + process_unicode((0x00B0|QK_UNICODE), record); // Eye + process_unicode((0x25A1|QK_UNICODE), record); // Mouth + process_unicode((0x00B0|QK_UNICODE), record); // Eye + register_code(KC_RSFT); + tap(KC_0); + unregister_code(KC_RSFT); + process_unicode((0x256F|QK_UNICODE), record); // Arm + tap(KC_SPC); + process_unicode((0x0361|QK_UNICODE), record); // Flippy + tap(KC_SPC); + process_unicode((0x253B|QK_UNICODE), record); // Table + process_unicode((0x2501|QK_UNICODE), record); // Table + process_unicode((0x253B|QK_UNICODE), record); // Table + + swapInput(); + } + return false; + break; + case RESET_TABLE: // ┬──┬ ノ( ゜-゜ノ) + if (record->event.pressed) { + swapInput(); + + process_unicode((0x252C|QK_UNICODE), record); // Table + process_unicode((0x2500|QK_UNICODE), record); // Table + process_unicode((0x2500|QK_UNICODE), record); // Table + process_unicode((0x252C|QK_UNICODE), record); // Table + tap(KC_SPC); + process_unicode((0x30CE|QK_UNICODE), record); // Arm + register_code(KC_RSFT); + tap(KC_9); + unregister_code(KC_RSFT); + tap(KC_SPC); + process_unicode((0x309C|QK_UNICODE), record); // Eye + tap(KC_MINS); + process_unicode((0x309C|QK_UNICODE), record); // Eye + process_unicode((0x30CE|QK_UNICODE), record); // Arm + register_code(KC_RSFT); + tap(KC_0); + unregister_code(KC_RSFT); + + swapInput(); + } + return false; + break; + case SHRUG: // ¯\_(ツ)_/¯ + if (record->event.pressed) { + swapInput(); + + process_unicode((0x00AF|QK_UNICODE), record); // Hand + tap(KC_BSLS); // Arm + register_code(KC_RSFT); + tap(KC_UNDS); // Arm + tap(KC_LPRN); // Head + unregister_code(KC_RSFT); + process_unicode((0x30C4|QK_UNICODE), record); // Face + register_code(KC_RSFT); + tap(KC_RPRN); // Head + tap(KC_UNDS); // Arm + unregister_code(KC_RSFT); + tap(KC_SLSH); // Arm + process_unicode((0x00AF|QK_UNICODE), record); // Hand + + swapInput(); + } + return false; + break; + case LOOK_OF_DISAPPROVAL: // ಠ_ಠ + if(record->event.pressed){ + swapInput(); + + process_unicode((0x0CA0|QK_UNICODE), record); // Eye + register_code(KC_RSFT); + tap(KC_MINS); + unregister_code(KC_RSFT); + process_unicode((0x0CA0|QK_UNICODE), record); // Eye + + swapInput(); + } + return false; + break; + } + return true; +} diff --git a/keyboards/ergotravel/keymaps/viet/rules.mk b/keyboards/ergotravel/keymaps/viet/rules.mk new file mode 100644 index 0000000000..da4752731b --- /dev/null +++ b/keyboards/ergotravel/keymaps/viet/rules.mk @@ -0,0 +1,7 @@ +RGBLIGHT_ENABLE = yes +BACKLIGHT_ENABLE = no +UNICODE_ENABLE = yes + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/ergotravel/matrix.c b/keyboards/ergotravel/matrix.c new file mode 100644 index 0000000000..4061924dc2 --- /dev/null +++ b/keyboards/ergotravel/matrix.c @@ -0,0 +1,482 @@ +/* +Copyright 2018 Pierre Constantineau + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +/* + * scan matrix + */ +#include <stdint.h> +#include <stdbool.h> +#include <avr/io.h> +#include "wait.h" +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" +#include "split_util.h" +#include "pro_micro.h" +#include "config.h" +#include "timer.h" +#include "backlight.h" + +#ifdef USE_I2C +# include "i2c.h" +#else // USE_SERIAL +# include "serial.h" +#endif + +#ifndef DEBOUNCING_DELAY +# define DEBOUNCING_DELAY 5 +#endif + +#if (DEBOUNCING_DELAY > 0) + static uint16_t debouncing_time; + static bool debouncing = false; +#endif + +#if (MATRIX_COLS <= 8) +# define print_matrix_header() print("\nr/c 01234567\n") +# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) +# define matrix_bitpop(i) bitpop(matrix[i]) +# define ROW_SHIFTER ((uint8_t)1) +#else +# error "Currently only supports 8 COLS" +#endif +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +#define ERROR_DISCONNECT_COUNT 5 + +#define SERIAL_LED_ADDR 0x00 + +#define ROWS_PER_HAND (MATRIX_ROWS/2) + +static uint8_t error_count = 0; + +static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; +static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +#if (DIODE_DIRECTION == COL2ROW) + static void init_cols(void); + static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row); + static void unselect_rows(void); + static void select_row(uint8_t row); + static void unselect_row(uint8_t row); +#elif (DIODE_DIRECTION == ROW2COL) + static void init_rows(void); + static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col); + static void unselect_cols(void); + static void unselect_col(uint8_t col); + static void select_col(uint8_t col); +#endif + + +__attribute__ ((weak)) +void matrix_init_kb(void) { + matrix_init_user(); +} + +__attribute__ ((weak)) +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +__attribute__ ((weak)) +void matrix_init_user(void) { +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { +} + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + debug_enable = true; + debug_matrix = true; + debug_mouse = true; + // initialize row and col + unselect_rows(); + init_cols(); + + TX_RX_LED_INIT; + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + matrix_debouncing[i] = 0; + } + + matrix_init_quantum(); + +} + +uint8_t _matrix_scan(void) +{ + int offset = isLeftHand ? 0 : (ROWS_PER_HAND); +#if (DIODE_DIRECTION == COL2ROW) + // Set row, read cols + for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) { +# if (DEBOUNCING_DELAY > 0) + bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row); + + if (matrix_changed) { + debouncing = true; + debouncing_time = timer_read(); + PORTD ^= (1 << 2); + } + +# else + read_cols_on_row(matrix+offset, current_row); +# endif + + } + +#elif (DIODE_DIRECTION == ROW2COL) + // Set col, read rows + for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { +# if (DEBOUNCING_DELAY > 0) + bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col); + if (matrix_changed) { + debouncing = true; + debouncing_time = timer_read(); + } +# else + read_rows_on_col(matrix+offset, current_col); +# endif + + } +#endif + +# if (DEBOUNCING_DELAY > 0) + if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { + for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { + matrix[i+offset] = matrix_debouncing[i+offset]; + } + debouncing = false; + } +# endif + + return 1; +} + +#ifdef USE_I2C + +// Get rows from other half over i2c +int i2c_transaction(void) { + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + + int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); + if (err) goto i2c_error; + + // start of matrix stored at 0x00 + err = i2c_master_write(0x00); + if (err) goto i2c_error; + +#ifdef BACKLIGHT_ENABLE + // Write backlight level for slave to read + err = i2c_master_write(get_backlight_level()); +#else + // Write zero, so our byte index is the same + err = i2c_master_write(0x00); +#endif + if (err) goto i2c_error; + + // Start read + err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); + if (err) goto i2c_error; + + if (!err) { + int i; + for (i = 0; i < ROWS_PER_HAND-1; ++i) { + matrix[slaveOffset+i] = i2c_master_read(I2C_ACK); + } + matrix[slaveOffset+i] = i2c_master_read(I2C_NACK); + i2c_master_stop(); + } else { +i2c_error: // the cable is disconnceted, or something else went wrong + i2c_reset_state(); + return err; + } + + return 0; +} + +#else // USE_SERIAL + +int serial_transaction(void) { + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + + if (serial_update_buffers()) { + return 1; + } + + for (int i = 0; i < ROWS_PER_HAND; ++i) { + matrix[slaveOffset+i] = serial_slave_buffer[i]; + } + +#ifdef BACKLIGHT_ENABLE + // Write backlight level for slave to read + serial_master_buffer[SERIAL_LED_ADDR] = get_backlight_level(); +#endif + return 0; +} +#endif + +uint8_t matrix_scan(void) +{ + uint8_t ret = _matrix_scan(); + +#ifdef USE_I2C + if( i2c_transaction() ) { +#else // USE_SERIAL + if( serial_transaction() ) { +#endif + // turn on the indicator led when halves are disconnected + TXLED1; + + error_count++; + + if (error_count > ERROR_DISCONNECT_COUNT) { + // reset other half if disconnected + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + for (int i = 0; i < ROWS_PER_HAND; ++i) { + matrix[slaveOffset+i] = 0; + } + } + } else { + // turn off the indicator led on no error + TXLED0; + error_count = 0; + } + matrix_scan_quantum(); + return ret; +} + +void matrix_slave_scan(void) { + _matrix_scan(); + + int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; + +#ifdef USE_I2C +#ifdef BACKLIGHT_ENABLE + // Read backlight level sent from master and update level on slave + backlight_set(i2c_slave_buffer[0]); +#endif + for (int i = 0; i < ROWS_PER_HAND; ++i) { + i2c_slave_buffer[i+1] = matrix[offset+i]; + } +#else // USE_SERIAL + for (int i = 0; i < ROWS_PER_HAND; ++i) { + serial_slave_buffer[i] = matrix[offset+i]; + } + +#ifdef BACKLIGHT_ENABLE + // Read backlight level sent from master and update level on slave + backlight_set(serial_master_buffer[SERIAL_LED_ADDR]); +#endif +#endif +} + +bool matrix_is_modified(void) +{ + if (debouncing) return false; + return true; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & ((matrix_row_t)1<<col)); +} + +inline +matrix_row_t matrix_get_row(uint8_t row) +{ + return matrix[row]; +} + +void matrix_print(void) +{ + print("\nr/c 0123456789ABCDEF\n"); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + phex(row); print(": "); + pbin_reverse16(matrix_get_row(row)); + print("\n"); + } +} + +uint8_t matrix_key_count(void) +{ + uint8_t count = 0; + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + count += bitpop16(matrix[i]); + } + return count; +} + +#if (DIODE_DIRECTION == COL2ROW) + +static void init_cols(void) +{ + for(uint8_t x = 0; x < MATRIX_COLS; x++) { + uint8_t pin = col_pins[x]; + _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN + _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI + } +} + +static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) +{ + // Store last value of row prior to reading + matrix_row_t last_row_value = current_matrix[current_row]; + + // Clear data in matrix row + current_matrix[current_row] = 0; + + // Select row and wait for row selecton to stabilize + select_row(current_row); + wait_us(30); + + // For each col... + for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) { + + // Select the col pin to read (active low) + uint8_t pin = col_pins[col_index]; + uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF)); + + // Populate the matrix row with the state of the col pin + current_matrix[current_row] |= pin_state ? 0 : (ROW_SHIFTER << col_index); + } + + // Unselect row + unselect_row(current_row); + + return (last_row_value != current_matrix[current_row]); +} + +static void select_row(uint8_t row) +{ + uint8_t pin = row_pins[row]; + _SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT + _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW +} + +static void unselect_row(uint8_t row) +{ + uint8_t pin = row_pins[row]; + _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN + _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI +} + +static void unselect_rows(void) +{ + for(uint8_t x = 0; x < ROWS_PER_HAND; x++) { + uint8_t pin = row_pins[x]; + _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN + _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI + } +} + +#elif (DIODE_DIRECTION == ROW2COL) + +static void init_rows(void) +{ + for(uint8_t x = 0; x < ROWS_PER_HAND; x++) { + uint8_t pin = row_pins[x]; + _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN + _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI + } +} + +static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) +{ + bool matrix_changed = false; + + // Select col and wait for col selecton to stabilize + select_col(current_col); + wait_us(30); + + // For each row... + for(uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++) + { + + // Store last value of row prior to reading + matrix_row_t last_row_value = current_matrix[row_index]; + + // Check row pin state + if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0) + { + // Pin LO, set col bit + current_matrix[row_index] |= (ROW_SHIFTER << current_col); + } + else + { + // Pin HI, clear col bit + current_matrix[row_index] &= ~(ROW_SHIFTER << current_col); + } + + // Determine if the matrix changed state + if ((last_row_value != current_matrix[row_index]) && !(matrix_changed)) + { + matrix_changed = true; + } + } + + // Unselect col + unselect_col(current_col); + + return matrix_changed; +} + +static void select_col(uint8_t col) +{ + uint8_t pin = col_pins[col]; + _SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT + _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW +} + +static void unselect_col(uint8_t col) +{ + uint8_t pin = col_pins[col]; + _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN + _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI +} + +static void unselect_cols(void) +{ + for(uint8_t x = 0; x < MATRIX_COLS; x++) { + uint8_t pin = col_pins[x]; + _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN + _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI + } +} + +#endif diff --git a/keyboards/ergotravel/readme.md b/keyboards/ergotravel/readme.md new file mode 100644 index 0000000000..ad37bc1acc --- /dev/null +++ b/keyboards/ergotravel/readme.md @@ -0,0 +1,28 @@ +ErgoTravel +==== + + + + +A split ergo 4x6 keyboard with 2 or 3 thumb keys and extra inner macro keys designed by Pierre Constantineau. [More info on the GitHub Repo](https://github.com/jpconstantineau/ErgoTravel). + +**Status** The ErgoTravel is currently being beta-tested. + +Keyboard Maintainer: [/u/jpconstantineau](https://github.com/jpconstantineau) + +Hardware Supported: Pro Micro (ATmega32U4) + +Hardware Availability: [Group Buys](https://keyboards.jpconstantineau.com/) or order your own [yourself](https://github.com/jpconstantineau/ErgoTravel/blob/master/OrderingInstructions.md) + + +Make example for this keyboard (after setting up your build environment): + + make ergotravel/rev1:default + +Example of flashing this keyboard: + + make ergotravel/rev1:default:avrdude + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. + +A build guide for this keyboard can be found here: [Build Guide](https://github.com/jpconstantineau) diff --git a/keyboards/ergotravel/rev1/config.h b/keyboards/ergotravel/rev1/config.h new file mode 100644 index 0000000000..beda546a04 --- /dev/null +++ b/keyboards/ergotravel/rev1/config.h @@ -0,0 +1,90 @@ +/* +Copyright 2018 Pierre Constantineau <jpconstantineau@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef REV1_CONFIG_H +#define REV1_CONFIG_H + +#include QMK_KEYBOARD_CONFIG_H + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xCEEB +#define PRODUCT_ID 0x1256 +#define DEVICE_VER 0x0100 +#define MANUFACTURER JPConstantineau.com +#define PRODUCT ErgoTravel Keyboard +#define DESCRIPTION Split 45 percent ergonomic keyboard + +/* key matrix size */ +// Rows are doubled-up +#define MATRIX_ROWS 8 +#define MATRIX_COLS 7 + +// wiring of each half +#define MATRIX_ROW_PINS { C6, D7, E6, B4 } +#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2, B6 } + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +// #define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +#define BACKLIGHT_PIN B5 +#define BACKLIGHT_LEVELS 5 + +/* ws2812 RGB LED */ +#define RGB_DI_PIN D3 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 12 // Number of LEDs +#define ws2812_PORTREG PORTD +#define ws2812_DDRREG DDRD + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +// #define NO_DEBUG + +/* disable print */ +// #define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/ergotravel/rev1/rev1.c b/keyboards/ergotravel/rev1/rev1.c new file mode 100644 index 0000000000..609c479eb3 --- /dev/null +++ b/keyboards/ergotravel/rev1/rev1.c @@ -0,0 +1,22 @@ +#include "rev1.h" + + +#ifdef SSD1306OLED +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + led_set_user(usb_led); +} +#endif + +void matrix_init_kb(void) { + + // // green led on + // DDRD |= (1<<5); + // PORTD &= ~(1<<5); + + // // orange led on + // DDRB |= (1<<0); + // PORTB &= ~(1<<0); + + matrix_init_user(); +}; diff --git a/keyboards/ergotravel/rev1/rev1.h b/keyboards/ergotravel/rev1/rev1.h new file mode 100644 index 0000000000..b20d9f9beb --- /dev/null +++ b/keyboards/ergotravel/rev1/rev1.h @@ -0,0 +1,37 @@ +#ifndef REV1_H +#define REV1_H + +#include "ergotravel.h" + +//void promicro_bootloader_jmp(bool program); +#include "quantum.h" + + +#ifdef USE_I2C +#include <stddef.h> +#ifdef __AVR__ + #include <avr/io.h> + #include <avr/interrupt.h> +#endif +#endif + +//void promicro_bootloader_jmp(bool program); + +#define LAYOUT( \ + L00, L01, L02, L03, L04, L05,L06, R00, R01, R02, R03, R04, R05,R06, \ + L10, L11, L12, L13, L14, L15,L16, R10, R11, R12, R13, R14, R15,R16, \ + L20, L21, L22, L23, L24, L25,L26, R20, R21, R22, R23, R24, R25,R26, \ + L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \ + ) \ + { \ + { L00, L01, L02, L03, L04, L05, L06 }, \ + { L10, L11, L12, L13, L14, L15, L16 }, \ + { L20, L21, L22, L23, L24, L25, L26 }, \ + { L30, L31, L32, L33, L34, L35, KC_NO }, \ + { R06, R05, R04, R03, R02, R01, R00 }, \ + { R16, R15, R14, R13, R12, R11, R10 }, \ + { R26, R25, R24, R23, R22, R21, R20 }, \ + { R35, R34, R33, R32, R31, R30, KC_NO } \ + } + +#endif diff --git a/keyboards/ergotravel/rev1/rules.mk b/keyboards/ergotravel/rev1/rules.mk new file mode 100644 index 0000000000..7b30c0beff --- /dev/null +++ b/keyboards/ergotravel/rev1/rules.mk @@ -0,0 +1 @@ +BACKLIGHT_ENABLE = no diff --git a/keyboards/ergotravel/rules.mk b/keyboards/ergotravel/rules.mk new file mode 100644 index 0000000000..fceb56edf8 --- /dev/null +++ b/keyboards/ergotravel/rules.mk @@ -0,0 +1,74 @@ +SRC += matrix.c \ + i2c.c \ + split_util.c \ + serial.c + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SUBPROJECT_rev1 = yes +USE_I2C = yes # I2C is used between the sides +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +CUSTOM_MATRIX = yes + +DEFAULT_FOLDER = ergotravel/rev1 diff --git a/keyboards/ergotravel/serial.c b/keyboards/ergotravel/serial.c new file mode 100644 index 0000000000..74bcbb6bf6 --- /dev/null +++ b/keyboards/ergotravel/serial.c @@ -0,0 +1,228 @@ +/* + * WARNING: be careful changing this code, it is very timing dependent + */ + +#ifndef F_CPU +#define F_CPU 16000000 +#endif + +#include <avr/io.h> +#include <avr/interrupt.h> +#include <util/delay.h> +#include <stdbool.h> +#include "serial.h" + +#ifndef USE_I2C + +// Serial pulse period in microseconds. Its probably a bad idea to lower this +// value. +#define SERIAL_DELAY 24 + +uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; +uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; + +#define SLAVE_DATA_CORRUPT (1<<0) +volatile uint8_t status = 0; + +inline static +void serial_delay(void) { + _delay_us(SERIAL_DELAY); +} + +inline static +void serial_output(void) { + SERIAL_PIN_DDR |= SERIAL_PIN_MASK; +} + +// make the serial pin an input with pull-up resistor +inline static +void serial_input(void) { + SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; + SERIAL_PIN_PORT |= SERIAL_PIN_MASK; +} + +inline static +uint8_t serial_read_pin(void) { + return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); +} + +inline static +void serial_low(void) { + SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; +} + +inline static +void serial_high(void) { + SERIAL_PIN_PORT |= SERIAL_PIN_MASK; +} + +void serial_master_init(void) { + serial_output(); + serial_high(); +} + +void serial_slave_init(void) { + serial_input(); + + // Enable INT0 + EIMSK |= _BV(INT0); + // Trigger on falling edge of INT0 + EICRA &= ~(_BV(ISC00) | _BV(ISC01)); +} + +// Used by the master to synchronize timing with the slave. +static +void sync_recv(void) { + serial_input(); + // This shouldn't hang if the slave disconnects because the + // serial line will float to high if the slave does disconnect. + while (!serial_read_pin()); + serial_delay(); +} + +// Used by the slave to send a synchronization signal to the master. +static +void sync_send(void) { + serial_output(); + + serial_low(); + serial_delay(); + + serial_high(); +} + +// Reads a byte from the serial line +static +uint8_t serial_read_byte(void) { + uint8_t byte = 0; + serial_input(); + for ( uint8_t i = 0; i < 8; ++i) { + byte = (byte << 1) | serial_read_pin(); + serial_delay(); + _delay_us(1); + } + + return byte; +} + +// Sends a byte with MSB ordering +static +void serial_write_byte(uint8_t data) { + uint8_t b = 8; + serial_output(); + while( b-- ) { + if(data & (1 << b)) { + serial_high(); + } else { + serial_low(); + } + serial_delay(); + } +} + +// interrupt handle to be used by the slave device +ISR(SERIAL_PIN_INTERRUPT) { + sync_send(); + + uint8_t checksum = 0; + for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { + serial_write_byte(serial_slave_buffer[i]); + sync_send(); + checksum += serial_slave_buffer[i]; + } + serial_write_byte(checksum); + sync_send(); + + // wait for the sync to finish sending + serial_delay(); + + // read the middle of pulses + _delay_us(SERIAL_DELAY/2); + + uint8_t checksum_computed = 0; + for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { + serial_master_buffer[i] = serial_read_byte(); + sync_send(); + checksum_computed += serial_master_buffer[i]; + } + uint8_t checksum_received = serial_read_byte(); + sync_send(); + + serial_input(); // end transaction + + if ( checksum_computed != checksum_received ) { + status |= SLAVE_DATA_CORRUPT; + } else { + status &= ~SLAVE_DATA_CORRUPT; + } +} + +inline +bool serial_slave_DATA_CORRUPT(void) { + return status & SLAVE_DATA_CORRUPT; +} + +// Copies the serial_slave_buffer to the master and sends the +// serial_master_buffer to the slave. +// +// Returns: +// 0 => no error +// 1 => slave did not respond +int serial_update_buffers(void) { + // this code is very time dependent, so we need to disable interrupts + cli(); + + // signal to the slave that we want to start a transaction + serial_output(); + serial_low(); + _delay_us(1); + + // wait for the slaves response + serial_input(); + serial_high(); + _delay_us(SERIAL_DELAY); + + // check if the slave is present + if (serial_read_pin()) { + // slave failed to pull the line low, assume not present + sei(); + return 1; + } + + // if the slave is present syncronize with it + sync_recv(); + + uint8_t checksum_computed = 0; + // receive data from the slave + for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { + serial_slave_buffer[i] = serial_read_byte(); + sync_recv(); + checksum_computed += serial_slave_buffer[i]; + } + uint8_t checksum_received = serial_read_byte(); + sync_recv(); + + if (checksum_computed != checksum_received) { + sei(); + return 1; + } + + uint8_t checksum = 0; + // send data to the slave + for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { + serial_write_byte(serial_master_buffer[i]); + sync_recv(); + checksum += serial_master_buffer[i]; + } + serial_write_byte(checksum); + sync_recv(); + + // always, release the line when not in use + serial_output(); + serial_high(); + + sei(); + return 0; +} + +#endif diff --git a/keyboards/ergotravel/serial.h b/keyboards/ergotravel/serial.h new file mode 100644 index 0000000000..15fe4db7b4 --- /dev/null +++ b/keyboards/ergotravel/serial.h @@ -0,0 +1,26 @@ +#ifndef MY_SERIAL_H +#define MY_SERIAL_H + +#include "config.h" +#include <stdbool.h> + +/* TODO: some defines for interrupt setup */ +#define SERIAL_PIN_DDR DDRD +#define SERIAL_PIN_PORT PORTD +#define SERIAL_PIN_INPUT PIND +#define SERIAL_PIN_MASK _BV(PD0) +#define SERIAL_PIN_INTERRUPT INT0_vect + +#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 +#define SERIAL_MASTER_BUFFER_LENGTH 1 + +// Buffers for master - slave communication +extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; +extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; + +void serial_master_init(void); +void serial_slave_init(void); +int serial_update_buffers(void); +bool serial_slave_data_corrupt(void); + +#endif diff --git a/keyboards/ergotravel/split_util.c b/keyboards/ergotravel/split_util.c new file mode 100644 index 0000000000..346cbc9089 --- /dev/null +++ b/keyboards/ergotravel/split_util.c @@ -0,0 +1,86 @@ +#include <avr/io.h> +#include <avr/wdt.h> +#include <avr/power.h> +#include <avr/interrupt.h> +#include <util/delay.h> +#include <avr/eeprom.h> +#include "split_util.h" +#include "matrix.h" +#include "keyboard.h" +#include "config.h" +#include "timer.h" + +#ifdef USE_I2C +# include "i2c.h" +#else +# include "serial.h" +#endif + +volatile bool isLeftHand = true; + +static void setup_handedness(void) { + #ifdef EE_HANDS + isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); + #else + // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c + #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT) + isLeftHand = !has_usb(); + #else + isLeftHand = has_usb(); + #endif + #endif +} + +static void keyboard_master_setup(void) { +#ifdef USE_I2C + i2c_master_init(); +#ifdef SSD1306OLED + matrix_master_OLED_init (); +#endif +#else + serial_master_init(); +#endif +} + +static void keyboard_slave_setup(void) { + timer_init(); +#ifdef USE_I2C + i2c_slave_init(SLAVE_I2C_ADDRESS); +#else + serial_slave_init(); +#endif +} + +bool has_usb(void) { + USBCON |= (1 << OTGPADE); //enables VBUS pad + _delay_us(5); + return (USBSTA & (1<<VBUS)); //checks state of VBUS +} + +void split_keyboard_setup(void) { + setup_handedness(); + + if (has_usb()) { + keyboard_master_setup(); + } else { + keyboard_slave_setup(); + } + sei(); +} + +void keyboard_slave_loop(void) { + matrix_init(); + + while (1) { + matrix_slave_scan(); + } +} + +// this code runs before the usb and keyboard is initialized +void matrix_setup(void) { + split_keyboard_setup(); + + if (!has_usb()) { + keyboard_slave_loop(); + } +} diff --git a/keyboards/ergotravel/split_util.h b/keyboards/ergotravel/split_util.h new file mode 100644 index 0000000000..595a0659e1 --- /dev/null +++ b/keyboards/ergotravel/split_util.h @@ -0,0 +1,20 @@ +#ifndef SPLIT_KEYBOARD_UTIL_H +#define SPLIT_KEYBOARD_UTIL_H + +#include <stdbool.h> +#include "eeconfig.h" + +#define SLAVE_I2C_ADDRESS 0x32 + +extern volatile bool isLeftHand; + +// slave version of matix scan, defined in matrix.c +void matrix_slave_scan(void); + +void split_keyboard_setup(void); +bool has_usb(void); +void keyboard_slave_loop(void); + +void matrix_master_OLED_init (void); + +#endif diff --git a/keyboards/melody96/keymaps/crilith/keymap.c b/keyboards/melody96/keymaps/crilith/keymap.c index 3335de0502..3f26992808 100644 --- a/keyboards/melody96/keymaps/crilith/keymap.c +++ b/keyboards/melody96/keymaps/crilith/keymap.c @@ -1,83 +1,83 @@ -#include QMK_KEYBOARD_H
-
-enum custom_keycodes {
- QWERTY = SAFE_RANGE,
- DYNAMIC_MACRO_RANGE,
-};
-
-#include "dynamic_macro.h"
-
-#define _______ KC_TRNS
-#define KC_REC DYN_REC_START1
-#define KC_DONE DYN_REC_STOP
-#define KC_PLAY DYN_MACRO_PLAY1
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
- LAYOUT(
- KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_HOME, KC_END, KC_PGUP, KC_PGDN, KC_DEL,
- KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PMNS,
- KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS,
- KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT,
- KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT),
-
- LAYOUT(
- RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______,
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
- _______, RGB_TOG, _______, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______,
- BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
- _______, _______, _______, _______, BL_DEC, BL_TOGG, BL_INC, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
- _______, _______, _______, KC_PLAY, _______, KC_REC, KC_DONE, _______, _______, _______, _______, _______, _______),
-};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
- return MACRO_NONE;
-}
-
-void matrix_init_user(void) {
-}
-
-void matrix_scan_user(void) {
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
- if (!process_record_dynamic_macro(keycode, record)) {
- return false;
- }
- return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
- if (usb_led & (1 << USB_LED_NUM_LOCK)) {
- DDRC |= (1 << 6); PORTC &= ~(1 << 6);
- } else {
- DDRC &= ~(1 << 6); PORTC &= ~(1 << 6);
- }
-
- if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
- DDRC |= (1 << 7); PORTC &= ~(1 << 7);
- } else {
- DDRC &= ~(1 << 7); PORTC &= ~(1 << 7);
- }
-
- if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
- DDRB |= (1 << 5); PORTB &= ~(1 << 5);
- } else {
- DDRB &= ~(1 << 5); PORTB &= ~(1 << 5);
- }
-
- if (usb_led & (1 << USB_LED_COMPOSE)) {
-
- } else {
-
- }
-
- if (usb_led & (1 << USB_LED_KANA)) {
-
- } else {
-
- }
-
-}
+#include QMK_KEYBOARD_H + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + DYNAMIC_MACRO_RANGE, +}; + +#include "dynamic_macro.h" + +#define _______ KC_TRNS +#define KC_REC DYN_REC_START1 +#define KC_DONE DYN_REC_STOP +#define KC_PLAY DYN_MACRO_PLAY1 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_HOME, KC_END, KC_PGUP, KC_PGDN, KC_DEL, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PMNS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT), + + LAYOUT( + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, RGB_TOG, _______, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, + BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, BL_DEC, BL_TOGG, BL_INC, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, KC_PLAY, _______, KC_REC, KC_DONE, _______, _______, _______, _______, _______, _______), +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + return MACRO_NONE; +} + +void matrix_init_user(void) { +} + +void matrix_scan_user(void) { +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + if (!process_record_dynamic_macro(keycode, record)) { + return false; + } + return true; +} + +void led_set_user(uint8_t usb_led) { + + if (usb_led & (1 << USB_LED_NUM_LOCK)) { + DDRC |= (1 << 6); PORTC &= ~(1 << 6); + } else { + DDRC &= ~(1 << 6); PORTC &= ~(1 << 6); + } + + if (usb_led & (1 << USB_LED_CAPS_LOCK)) { + DDRC |= (1 << 7); PORTC &= ~(1 << 7); + } else { + DDRC &= ~(1 << 7); PORTC &= ~(1 << 7); + } + + if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { + DDRB |= (1 << 5); PORTB &= ~(1 << 5); + } else { + DDRB &= ~(1 << 5); PORTB &= ~(1 << 5); + } + + if (usb_led & (1 << USB_LED_COMPOSE)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_KANA)) { + + } else { + + } + +} |