summaryrefslogtreecommitdiff
path: root/keyboards
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards')
-rw-r--r--keyboards/atreus/readme.md2
-rw-r--r--keyboards/ergodox/ez/config.h2
-rw-r--r--keyboards/ergodox/ez/ez.c8
-rw-r--r--keyboards/ergodox/keymaps/dvorak_programmer/README.md7
-rw-r--r--keyboards/ergodox/keymaps/dvorak_programmer/keymap.c54
-rw-r--r--keyboards/ergodox/keymaps/swissgerman/keyboard-layout.json419
-rw-r--r--keyboards/ergodox/keymaps/swissgerman/keyboard-layout.pngbin0 -> 75633 bytes
-rw-r--r--keyboards/ergodox/keymaps/swissgerman/keyboard-layout_1_2.json436
-rw-r--r--keyboards/ergodox/keymaps/swissgerman/keyboard-layout_1_2.pngbin0 -> 58099 bytes
-rw-r--r--keyboards/ergodox/keymaps/swissgerman/keymap.c287
-rw-r--r--keyboards/ergodox/keymaps/swissgerman/readme.md15
-rw-r--r--keyboards/lets_split/config.h43
-rw-r--r--keyboards/lets_split/keymaps/default/keymap.c188
-rw-r--r--keyboards/lets_split/keymaps/i2c/config.h85
-rw-r--r--keyboards/lets_split/keymaps/serial/config.h87
-rw-r--r--keyboards/lets_split/rev1/config.h14
-rw-r--r--keyboards/lets_split/rev2/config.h13
-rw-r--r--keyboards/lets_split/rev2/rev2.h8
-rw-r--r--keyboards/planck/keymaps/callum/keymap.c51
-rw-r--r--keyboards/planck/keymaps/callum/readme.md12
-rw-r--r--keyboards/planck/keymaps/cbbrowne/Makefile4
-rw-r--r--keyboards/planck/keymaps/cbbrowne/keymap.c8
-rw-r--r--keyboards/ps2avrGB/Makefile3
-rw-r--r--keyboards/ps2avrGB/README.md61
-rw-r--r--keyboards/ps2avrGB/config.h38
-rw-r--r--keyboards/ps2avrGB/keymaps/default/keymap.c32
-rw-r--r--keyboards/ps2avrGB/matrix.c104
-rwxr-xr-xkeyboards/ps2avrGB/program74
-rw-r--r--keyboards/ps2avrGB/ps2avrGB.c0
-rw-r--r--keyboards/ps2avrGB/ps2avrGB.h43
-rw-r--r--keyboards/ps2avrGB/rules.mk43
-rw-r--r--keyboards/ps2avrGB/usbconfig.h396
32 files changed, 2049 insertions, 488 deletions
diff --git a/keyboards/atreus/readme.md b/keyboards/atreus/readme.md
index a4077668e3..8baa581f02 100644
--- a/keyboards/atreus/readme.md
+++ b/keyboards/atreus/readme.md
@@ -169,7 +169,7 @@ This requires [some hardware changes](https://www.reddit.com/r/MechanicalKeyboar
## Building
-Download or clone the whole firmware and navigate to the keyboards/planck folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use `make dfu` to program your PCB once you hit the reset button.
+Download or clone the whole firmware and navigate to the keyboards/atreus folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use `make dfu` to program your PCB once you hit the reset button.
Depending on which keymap you would like to use, you will have to compile slightly differently.
diff --git a/keyboards/ergodox/ez/config.h b/keyboards/ergodox/ez/config.h
index 6a8c66d7d4..e4f95c302c 100644
--- a/keyboards/ergodox/ez/config.h
+++ b/keyboards/ergodox/ez/config.h
@@ -49,7 +49,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_SAT_STEP 255
#define RGBLIGHT_VAL_STEP 12
-#define RGB_MIDI
+// #define RGB_MIDI
#define RGBW_BB_TWI
#define RGBW 1
diff --git a/keyboards/ergodox/ez/ez.c b/keyboards/ergodox/ez/ez.c
index 039e4c6bb1..3e19f23028 100644
--- a/keyboards/ergodox/ez/ez.c
+++ b/keyboards/ergodox/ez/ez.c
@@ -52,9 +52,9 @@ uint8_t init_mcp23018(void) {
// I2C subsystem
- uint8_t sreg_prev;
- sreg_prev=SREG;
- cli();
+ // uint8_t sreg_prev;
+ // sreg_prev=SREG;
+ // cli();
if (i2c_initialized == 0) {
i2c_init(); // on pins D(1,0)
i2c_initialized++;
@@ -83,7 +83,7 @@ uint8_t init_mcp23018(void) {
out:
i2c_stop();
- SREG=sreg_prev;
+ // SREG=sreg_prev;
return mcp23018_status;
}
diff --git a/keyboards/ergodox/keymaps/dvorak_programmer/README.md b/keyboards/ergodox/keymaps/dvorak_programmer/README.md
index 3e4a2545b8..54da74f7f2 100644
--- a/keyboards/ergodox/keymaps/dvorak_programmer/README.md
+++ b/keyboards/ergodox/keymaps/dvorak_programmer/README.md
@@ -7,18 +7,23 @@ Layers
------
* BASE: this is where you type.
+* SHELL_LAYER: this is a permanent layer which I use when I don't need the F keys and gives me bash shortcuts on the top row.
* SHELL_NAV: hold down the Tab key to access shell/terminal navigation shorcuts such as forward/backward word, history, Ctrl+C, screen tab movement.
* KEY_NAV: arrow key movement with backward/forward word support, and copy/paste.
* KEY_SEL: same as above, but every movement shift-selects.
* NUMBER: keypad layer.
* SYMBOL: all the symbols.
-* BRACKET: special brackets-only layer for programming
+* BRACKET: special brackets-only layer for programming. Activated by pressing left capslock (OSL)
* SHORTCUTS: sends Hyper keys for Autohotkey to interpret. I use this to switch between specific apps.
* MOUSE: use mouse keys
Updates
-------
+2017/01/22:
+* Made brackets toggle an OSL on the left capslock
+* Added SHELL_LAYER
+
2016/12/10:
* toggle for brackets layer is now on left thumb cluster.
diff --git a/keyboards/ergodox/keymaps/dvorak_programmer/keymap.c b/keyboards/ergodox/keymaps/dvorak_programmer/keymap.c
index f3d02f688d..7ed0c7f125 100644
--- a/keyboards/ergodox/keymaps/dvorak_programmer/keymap.c
+++ b/keyboards/ergodox/keymaps/dvorak_programmer/keymap.c
@@ -6,7 +6,8 @@
#include "action_code.h"
#define BASE 0 // default layer
-#define SHELL_NAV 1
+#define SHELL_LAYER 1
+#define SHELL_NAV 2
#define KEY_NAV 3 // key navigation layer
#define KEY_SEL 4 // key selection layer
#define NUMBER 5 // number layer
@@ -58,12 +59,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[BASE] = KEYMAP( // layer 0 : default
// left hand
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6,
- LT(MOUSE,KC_TAB), KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, MO(KEY_SEL),
- MO(SHELL_NAV), KC_A, KC_O, KC_E, KC_U, KC_I,
- KC_FN3, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, MO(KEY_NAV),
+ LT(SHELL_NAV,KC_TAB), KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, MO(KEY_SEL),
+ OSL(BRACKETS), KC_A, KC_O, KC_E, KC_U, KC_I,
+ OSM(MOD_LSFT), KC_SCLN, KC_Q, KC_J, KC_K, KC_X, MO(KEY_NAV),
OSL(SHORTCUTS),KC_FN4, KC_FN5,OSL(SYMBOL),MO(NUMBER),
// thumb cluster
- MO(BRACKETS), RCTL(KC_S),
+ MO(MOUSE), RCTL(KC_S),
RCTL(KC_DEL),
KC_BSPC,RCTL(KC_BSPC),KC_DEL,
// right hand
@@ -80,6 +81,33 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
),
+
+// permanent shell layer - meant to be used while in a terminal. only the top keys are overriden
+[SHELL_LAYER] = KEYMAP(
+ // left hand
+ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,LALT(KC_DOT),RCTL(KC_R),RCTL(KC_C),
+ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+ // bottom row
+ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+ // thumb cluster
+ KC_TRNS,KC_TRNS,
+ KC_TRNS,
+ KC_TRNS,KC_TRNS,KC_TRNS,
+ // right hand
+ RCTL(KC_W), LALT(KC_B),LALT(KC_F), KC_LEFT, KC_RIGHT, LALT(KC_D), KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ // bottom row
+ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+ // thumb cluster
+ KC_TRNS, KC_TRNS,
+ KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS
+),
+
// shell navigation layer
[SHELL_NAV] = KEYMAP(
// left hand
@@ -209,12 +237,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[BRACKETS] = KEYMAP(
// left hand
- KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
- KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
- KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
- KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
- KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
- KC_TRNS,KC_TRNS,
+ KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,
+ KC_TRNS,KC_TRNS,M(OPEN_CLOSE_CURLY), M(OPEN_CLOSE_PAREN),M(OPEN_CLOSE_BRACKET), KC_TRNS,KC_TRNS,
+ KC_TRNS,KC_LPRN, KC_RPRN, KC_LBRC, KC_RBRC, KC_TRNS,
+ KC_TRNS,KC_TRNS,KC_TRNS, KC_LCBR, KC_RCBR, KC_TRNS,KC_TRNS,
+ KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS,KC_TRNS,
KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,
// right hand
@@ -246,7 +274,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
MEH(KC_S), MEH(KC_T), MEH(KC_U), MEH(KC_V), MEH(KC_X),
MEH(KC_6), MEH(KC_7),
MEH(KC_8),
- MEH(KC_9), MEH(KC_Y), MEH(KC_Z)
+ MEH(KC_9), TO(BASE), TO(SHELL_LAYER)
),
@@ -406,6 +434,8 @@ void matrix_scan_user(void) {
switch (layer) {
case NUMBER:
case SYMBOL:
+ case BRACKETS:
+ //case SHELL_LAYER:
ergodox_right_led_2_on();
break;
case KEY_NAV:
diff --git a/keyboards/ergodox/keymaps/swissgerman/keyboard-layout.json b/keyboards/ergodox/keymaps/swissgerman/keyboard-layout.json
new file mode 100644
index 0000000000..6958952b48
--- /dev/null
+++ b/keyboards/ergodox/keymaps/swissgerman/keyboard-layout.json
@@ -0,0 +1,419 @@
+[
+ {
+ "backcolor": "#ffffff",
+ "name": "Ergodox Swiss German Layout - Base Layer",
+ "author": "Andreas Schmidt (https://github.com/remigius42)"
+ },
+ [
+ {
+ "x": 3.5
+ },
+ "#\n3",
+ {
+ "x": 10.5
+ },
+ "*\n8"
+ ],
+ [
+ {
+ "y": -0.875,
+ "x": 2.5
+ },
+ "@\n2",
+ {
+ "x": 1
+ },
+ "$\n4",
+ {
+ "x": 8.5
+ },
+ "&\n7",
+ {
+ "x": 1
+ },
+ "(\n9"
+ ],
+ [
+ {
+ "y": -0.875,
+ "x": 5.5
+ },
+ "%\n5",
+ {
+ "a": 7
+ },
+ "<i class='fa fa-arrow-left'></i>",
+ {
+ "x": 4.5
+ },
+ "<i class='fa fa-arrow-right'></i>",
+ {
+ "a": 4
+ },
+ "^\n6"
+ ],
+ [
+ {
+ "y": -0.875,
+ "w": 1.5
+ },
+ "°\n§",
+ "!\n1",
+ {
+ "x": 14.5
+ },
+ ")\n0",
+ {
+ "w": 1.5
+ },
+ "?\n'\n\n'"
+ ],
+ [
+ {
+ "y": -0.375,
+ "x": 3.5
+ },
+ "E",
+ {
+ "x": 10.5
+ },
+ "I"
+ ],
+ [
+ {
+ "y": -0.875,
+ "x": 2.5
+ },
+ "W",
+ {
+ "x": 1
+ },
+ "R",
+ {
+ "x": 8.5
+ },
+ "U",
+ {
+ "x": 1
+ },
+ "O"
+ ],
+ [
+ {
+ "y": -0.875,
+ "x": 5.5
+ },
+ "T",
+ {
+ "c": "#b56b6b",
+ "a": 6,
+ "h": 1.5
+ },
+ "Toggle Code Layer",
+ {
+ "x": 4.5,
+ "h": 1.5
+ },
+ "Toggle Code Layer",
+ {
+ "c": "#cccccc",
+ "a": 4
+ },
+ "Y"
+ ],
+ [
+ {
+ "y": -0.875,
+ "a": 6,
+ "w": 1.5
+ },
+ "Delete",
+ {
+ "a": 4
+ },
+ "Q",
+ {
+ "x": 14.5
+ },
+ "P",
+ {
+ "w": 1.5
+ },
+ "è\nü\n\n["
+ ],
+ [
+ {
+ "y": -0.375,
+ "x": 3.5
+ },
+ "D",
+ {
+ "x": 10.5
+ },
+ "K"
+ ],
+ [
+ {
+ "y": -0.875,
+ "x": 2.5
+ },
+ "S",
+ {
+ "x": 1
+ },
+ "F",
+ {
+ "x": 8.5
+ },
+ "J",
+ {
+ "x": 1
+ },
+ "L"
+ ],
+ [
+ {
+ "y": -0.875,
+ "x": 5.5
+ },
+ "G",
+ {
+ "x": 6.5
+ },
+ "H"
+ ],
+ [
+ {
+ "y": -0.875,
+ "a": 6,
+ "w": 1.5
+ },
+ "Backspace",
+ {
+ "c": "#79c777",
+ "a": 4
+ },
+ "A\n\nLyr3",
+ {
+ "x": 14.5
+ },
+ "é\nö\nLyr3",
+ {
+ "c": "#748adb",
+ "w": 1.5
+ },
+ "à\nä\nCmd\n{"
+ ],
+ [
+ {
+ "y": -0.625,
+ "x": 6.5,
+ "c": "#cccccc",
+ "a": 6,
+ "h": 1.5
+ },
+ "Hyper",
+ {
+ "x": 4.5,
+ "h": 1.5
+ },
+ "Meh"
+ ],
+ [
+ {
+ "y": -0.75,
+ "x": 3.5,
+ "a": 4
+ },
+ "C",
+ {
+ "x": 10.5
+ },
+ ";\n,"
+ ],
+ [
+ {
+ "y": -0.875,
+ "x": 2.5,
+ "c": "#748adb"
+ },
+ "X\n\nAlt",
+ {
+ "x": 1,
+ "c": "#cccccc"
+ },
+ "V",
+ {
+ "x": 8.5
+ },
+ "M",
+ {
+ "x": 1,
+ "c": "#748adb"
+ },
+ ":\n.\nAlt"
+ ],
+ [
+ {
+ "y": -0.875,
+ "x": 5.5,
+ "c": "#cccccc"
+ },
+ "B",
+ {
+ "x": 6.5
+ },
+ "N"
+ ],
+ [
+ {
+ "y": -0.875,
+ "a": 6,
+ "w": 1.5
+ },
+ "Shift",
+ {
+ "c": "#748adb",
+ "a": 4
+ },
+ "Z\n\nCtrl",
+ {
+ "x": 14.5
+ },
+ "_\n-\nCtrl",
+ {
+ "c": "#cccccc",
+ "a": 6,
+ "w": 1.5
+ },
+ "Shift"
+ ],
+ [
+ {
+ "y": -0.375,
+ "x": 3.5,
+ "a": 7
+ },
+ "<i class='fa fa-arrow-left'></i>",
+ {
+ "x": 10.5
+ },
+ "<i class='fa fa-arrow-down'></i>"
+ ],
+ [
+ {
+ "y": -0.875,
+ "x": 2.5,
+ "a": 4
+ },
+ "£\n$\n\n}",
+ {
+ "x": 1,
+ "a": 7
+ },
+ "<i class='fa fa-arrow-right'></i>",
+ {
+ "x": 10.5,
+ "a": 6
+ },
+ "AltGr"
+ ],
+ [
+ {
+ "y": -0.9950000000000001,
+ "x": 14,
+ "a": 7
+ },
+ "<i class='fa fa-arrow-up'></i>"
+ ],
+ [
+ {
+ "y": -0.7549999999999999,
+ "x": 0.5,
+ "c": "#b56b6b",
+ "a": 4
+ },
+ ">\n<\nCode Layer\n\\",
+ {
+ "c": "#cccccc"
+ },
+ "`\n^\n\n~",
+ {
+ "x": 14.5
+ },
+ "!\n¨\n\n]",
+ {
+ "c": "#b56b6b"
+ },
+ "\n\nCode Layer"
+ ],
+ [
+ {
+ "r": 30,
+ "rx": 6.5,
+ "ry": 4.25,
+ "y": -1,
+ "x": 1,
+ "c": "#748adb"
+ },
+ "Apps\nAlt",
+ {
+ "c": "#cccccc",
+ "a": 6
+ },
+ "Win / Cmd"
+ ],
+ [
+ {
+ "h": 2
+ },
+ "Space",
+ {
+ "h": 2
+ },
+ "Back Space",
+ "Home"
+ ],
+ [
+ {
+ "x": 2
+ },
+ "End"
+ ],
+ [
+ {
+ "r": -30,
+ "rx": 13,
+ "y": -1,
+ "x": -3
+ },
+ "Alt",
+ {
+ "c": "#748adb",
+ "a": 4
+ },
+ "Esc\nCtrl"
+ ],
+ [
+ {
+ "x": -3,
+ "c": "#cccccc",
+ "a": 6
+ },
+ "Pg Up",
+ {
+ "h": 2
+ },
+ "Tab",
+ {
+ "h": 2
+ },
+ "Enter"
+ ],
+ [
+ {
+ "x": -3
+ },
+ "Pg Dn"
+ ]
+]
diff --git a/keyboards/ergodox/keymaps/swissgerman/keyboard-layout.png b/keyboards/ergodox/keymaps/swissgerman/keyboard-layout.png
new file mode 100644
index 0000000000..aff6af8513
--- /dev/null
+++ b/keyboards/ergodox/keymaps/swissgerman/keyboard-layout.png
Binary files differ
diff --git a/keyboards/ergodox/keymaps/swissgerman/keyboard-layout_1_2.json b/keyboards/ergodox/keymaps/swissgerman/keyboard-layout_1_2.json
new file mode 100644
index 0000000000..38a728514f
--- /dev/null
+++ b/keyboards/ergodox/keymaps/swissgerman/keyboard-layout_1_2.json
@@ -0,0 +1,436 @@
+[
+ {
+ "backcolor": "#ffffff",
+ "name": "Ergodox Swiss German Layout - Symbol & Media Layer",
+ "author": "Andreas Schmidt (https://github.com/remigius42)"
+ },
+ [
+ {
+ "x": 3.5,
+ "t": "#b81c1c"
+ },
+ "F3",
+ {
+ "x": 10.5
+ },
+ "F8"
+ ],
+ [
+ {
+ "y": -0.875,
+ "x": 2.5
+ },
+ "F2",
+ {
+ "x": 1
+ },
+ "F4",
+ {
+ "x": 8.5
+ },
+ "F7",
+ {
+ "x": 1
+ },
+ "F9"
+ ],
+ [
+ {
+ "y": -0.875,
+ "x": 5.5
+ },
+ "F5",
+ {
+ "t": "#000000",
+ "a": 7
+ },
+ "",
+ {
+ "x": 4.5
+ },
+ "",
+ {
+ "t": "#b81c1c",
+ "a": 4
+ },
+ "F6"
+ ],
+ [
+ {
+ "y": -0.875,
+ "t": "#000000\n\n\n#529151",
+ "w": 1.5
+ },
+ "\n\n\nFlash",
+ {
+ "t": "#b81c1c"
+ },
+ "F1",
+ {
+ "x": 14.5
+ },
+ "F10",
+ {
+ "t": "#b81c1c\n\n\n#529151",
+ "w": 1.5
+ },
+ "F11\n\n\nFlash"
+ ],
+ [
+ {
+ "y": -0.375,
+ "x": 3.5
+ },
+ "{\n\n\n<i class='fa fa-arrow-circle-up'></i>",
+ {
+ "x": 10.5,
+ "t": "#b81c1c"
+ },
+ "8"
+ ],
+ [
+ {
+ "y": -0.875,
+ "x": 2.5
+ },
+ "@",
+ {
+ "x": 1
+ },
+ "}",
+ {
+ "x": 8.5,
+ "t": "#b81c1c\n\n\n#529151"
+ },
+ "7\n\n\nHTML ul",
+ {
+ "x": 1
+ },
+ "9\n\n\nHTML ol"
+ ],
+ [
+ {
+ "y": -0.875,
+ "x": 5.5,
+ "t": "#b81c1c"
+ },
+ "|",
+ {
+ "t": "#000000",
+ "a": 7,
+ "h": 1.5
+ },
+ "",
+ {
+ "x": 4.5,
+ "h": 1.5
+ },
+ "",
+ {
+ "t": "#b81c1c",
+ "a": 4
+ },
+ "<i class='fa fa-arrow-up'></i>"
+ ],
+ [
+ {
+ "y": -0.875,
+ "t": "#000000",
+ "a": 7,
+ "w": 1.5
+ },
+ "",
+ {
+ "t": "#b81c1c",
+ "a": 4
+ },
+ "!",
+ {
+ "x": 14.5
+ },
+ "*",
+ {
+ "w": 1.5
+ },
+ "F12"
+ ],
+ [
+ {
+ "y": -0.375,
+ "x": 3.5,
+ "t": "#b81c1c\n\n\n#529151"
+ },
+ "(\n\n\n<i class='fa fa-arrow-circle-down'></i>",
+ {
+ "x": 10.5
+ },
+ "5\n\n\nHTML li"
+ ],
+ [
+ {
+ "y": -0.875,
+ "x": 2.5
+ },
+ "$\n\n\n<i class='fa fa-arrow-circle-left'></i>",
+ {
+ "x": 1
+ },
+ ")\n\n\n<i class='fa fa-arrow-circle-right'></i>",
+ {
+ "x": 8.5,
+ "t": "#b81c1c"
+ },
+ "4",
+ {
+ "x": 1
+ },
+ "6"
+ ],
+ [
+ {
+ "y": -0.875,
+ "x": 5.5
+ },
+ "`",
+ {
+ "x": 6.5
+ },
+ "<i class='fa fa-arrow-down'></i>"
+ ],
+ [
+ {
+ "y": -0.875,
+ "t": "#000000",
+ "a": 7,
+ "w": 1.5
+ },
+ "",
+ {
+ "t": "#b81c1c",
+ "a": 4
+ },
+ "#",
+ {
+ "x": 14.5
+ },
+ "+",
+ {
+ "t": "#000000\n\n\n#529151",
+ "w": 1.5
+ },
+ "\n\n\n<i class='fa fa-play'></i><i class='fa fa-pause'></i>"
+ ],
+ [
+ {
+ "y": -0.625,
+ "x": 6.5,
+ "t": "#000000",
+ "a": 7,
+ "h": 1.5
+ },
+ "",
+ {
+ "x": 4.5,
+ "h": 1.5
+ },
+ ""
+ ],
+ [
+ {
+ "y": -0.75,
+ "x": 3.5,
+ "t": "#b81c1c\n\n\n#529151",
+ "a": 4
+ },
+ "[\n\n\nHTML code",
+ {
+ "x": 10.5
+ },
+ "2\n\n\n<i class='fa fa-fast-backward'></i>"
+ ],
+ [
+ {
+ "y": -0.875,
+ "x": 2.5,
+ "t": "#b81c1c"
+ },
+ "^",
+ {
+ "x": 1,
+ "t": "#b81c1c\n\n\n#529151"
+ },
+ "]\n\n\nHTML br",
+ {
+ "x": 8.5,
+ "t": "#b81c1c"
+ },
+ "1",
+ {
+ "x": 1,
+ "t": "#b81c1c\n\n\n#529151"
+ },
+ "3\n\n\n<i class='fa fa-fast-forward'></i>"
+ ],
+ [
+ {
+ "y": -0.875,
+ "x": 5.5,
+ "t": "#b81c1c"
+ },
+ "~",
+ {
+ "x": 6.5
+ },
+ "&"
+ ],
+ [
+ {
+ "y": -0.875,
+ "t": "#000000",
+ "a": 7,
+ "w": 1.5
+ },
+ "",
+ {
+ "t": "#b81c1c",
+ "a": 4
+ },
+ "%",
+ {
+ "x": 14.5
+ },
+ "\\",
+ {
+ "t": "#000000",
+ "a": 7,
+ "w": 1.5
+ },
+ ""
+ ],
+ [
+ {
+ "y": -0.375,
+ "x": 3.5,
+ "t": "#000000\n\n\n#529151",
+ "a": 4
+ },
+ "\n\n\nleft click",
+ {
+ "x": 10.5,
+ "t": "#b81c1c\n\n\n#529151"
+ },
+ ".\n\n\n<i class='fa fa-volume-down'></i>"
+ ],
+ [
+ {
+ "y": -0.875,
+ "x": 2.5,
+ "t": "#000000",
+ "a": 7
+ },
+ "",
+ {
+ "x": 1,
+ "t": "#000000\n\n\n#529151",
+ "a": 4
+ },
+ "\n\n\nright click",
+ {
+ "x": 8.5,
+ "t": "#b81c1c\n\n\n#529151"
+ },
+ "?\n\n\n<i class='fa fa-volume-up'></i>",
+ {
+ "x": 1,
+ "t": "#b81c1c"
+ },
+ "0"
+ ],
+ [
+ {
+ "y": -0.75,
+ "x": 0.5,
+ "t": "#000000",
+ "a": 7
+ },
+ "",
+ {
+ "t": "#b81c1c",
+ "a": 4
+ },
+ "EPRM RST",
+ {
+ "x": 14.5,
+ "t": "#000000",
+ "a": 7
+ },
+ "",
+ ""
+ ],
+ [
+ {
+ "r": 30,
+ "rx": 6.5,
+ "ry": 4.25,
+ "y": -1,
+ "x": 1
+ },
+ "",
+ ""
+ ],
+ [
+ {
+ "t": "#000000\n\n\n#529151",
+ "a": 4,
+ "h": 2
+ },
+ "\n\n\nEnter",
+ {
+ "t": "#000000",
+ "a": 7,
+ "h": 2
+ },
+ "",
+ ""
+ ],
+ [
+ {
+ "x": 2
+ },
+ ""
+ ],
+ [
+ {
+ "r": -30,
+ "rx": 13,
+ "y": -1,
+ "x": -3
+ },
+ "",
+ ""
+ ],
+ [
+ {
+ "x": -3
+ },
+ "",
+ {
+ "h": 2
+ },
+ "",
+ {
+ "t": "#000000\n\n\n#529151",
+ "a": 4,
+ "h": 2
+ },
+ "\n\n\nWeb back"
+ ],
+ [
+ {
+ "x": -3,
+ "t": "#000000",
+ "a": 7
+ },
+ ""
+ ]
+]
diff --git a/keyboards/ergodox/keymaps/swissgerman/keyboard-layout_1_2.png b/keyboards/ergodox/keymaps/swissgerman/keyboard-layout_1_2.png
new file mode 100644
index 0000000000..54c4a7587c
--- /dev/null
+++ b/keyboards/ergodox/keymaps/swissgerman/keyboard-layout_1_2.png
Binary files differ
diff --git a/keyboards/ergodox/keymaps/swissgerman/keymap.c b/keyboards/ergodox/keymaps/swissgerman/keymap.c
new file mode 100644
index 0000000000..2291fb651a
--- /dev/null
+++ b/keyboards/ergodox/keymaps/swissgerman/keymap.c
@@ -0,0 +1,287 @@
+#include "ergodox.h"
+#include "debug.h"
+#include "action_layer.h"
+#include "version.h"
+#include "string.h"
+
+#ifdef SUBPROJECT_infinity
+#include "visualizer/lcd_backlight.h"
+#endif
+
+
+#define BASE 0 // default layer
+#define SYMB 1 // symbols
+#define MDIA 2 // media keys
+
+#define EPRM M(1) // Macro 1: Reset EEPROM
+#define HTML_LI M(10)
+#define HTML_UL M(11)
+#define HTML_OL M(12)
+#define HTML_CODE M(13)
+#define HTML_BR M(14)
+
+#define SEND_TAG(TAG) do {\
+ send_key(KC_NONUS_BSLASH); \
+ SEND_STRING(TAG); \
+ send_larger_than(); \
+ send_key(KC_NONUS_BSLASH); \
+ SEND_STRING("&"); \
+ SEND_STRING(TAG); \
+ send_larger_than(); \
+ go_back_based_on_tag(TAG); \
+ } while (0)
+
+#define SEND_SHORT_TAG(TAG) do {\
+ send_key(KC_NONUS_BSLASH); \
+ SEND_STRING(TAG); \
+ SEND_STRING("&"); \
+ send_larger_than(); \
+ } while (0)
+
+void send_key(uint16_t keycode);
+void go_back_based_on_tag(char* tag);
+void send_larger_than(void);
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Keymap 0: Basic layer
+ *
+ * ,--------------------------------------------------. ,--------------------------------------------------.
+ * | § | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | ' |
+ * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
+ * | Del | Q | W | E | R | T | L1 | | L1 | Z | U | I | O | P | ü |
+ * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
+ * | BkSp | A /L2| S | D | F | G |------| |------| H | J | K | L |ö / L2|ä / Cmd |
+ * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------|
+ * | LShift |Y/Ctrl|X/Alt | C | V | B | | | | N | M | , |./Alt |-/Ctrl| RShift |
+ * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
+ * |< / L1| ^ | $ | Left | Right| | Up | Down |AltGr | ¨ | ~L1 |
+ * `----------------------------------' `----------------------------------'
+ * ,-------------. ,-------------.
+ * | App | LGui | | Alt |Ctrl/Esc|
+ * ,------|------|------| |------+--------+------.
+ * | | | Home | | PgUp | | |
+ * | Space|Backsp|------| |------| Tab |Enter |
+ * | |ace | End | | PgDn | | |
+ * `--------------------' `----------------------'
+ */
+// If it accepts an argument (i.e, is a function), it doesn't need KC_.
+// Otherwise, it needs KC_*
+[BASE] = KEYMAP( // layer 0 : default
+ // left hand
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT,
+ KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB),
+ KC_BSPC, LT(MDIA, KC_A),KC_S, KC_D, KC_F, KC_G,
+ KC_LSFT, CTL_T(KC_Z), ALT_T(KC_X), KC_C, KC_V, KC_B, ALL_T(KC_NO),
+ LT(SYMB,KC_NONUS_BSLASH), KC_EQL, KC_BSLS, KC_LEFT,KC_RGHT,
+ ALT_T(KC_APP), KC_LGUI,
+ KC_HOME,
+ KC_SPC,KC_BSPC,KC_END,
+ // right hand
+ KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,
+ TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,
+ KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT),
+ MEH_T(KC_NO),KC_N, KC_M, KC_COMM,ALT_T(KC_DOT), CTL_T(KC_SLSH), KC_RSFT,
+ KC_UP, KC_DOWN,KC_RALT,KC_RBRC, KC_FN1,
+ KC_LALT,CTL_T(KC_ESC),
+ KC_PGUP,
+ KC_PGDN,KC_TAB, KC_ENT
+ ),
+/* Keymap 1: Symbol Layer
+ *
+ * ,--------------------------------------------------. ,--------------------------------------------------.
+ * |Version | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 |
+ * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
+ * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 |
+ * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
+ * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | |
+ * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
+ * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | |
+ * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
+ * | | EPRM | | | | | ? | . | 0 | = | |
+ * `----------------------------------' `----------------------------------'
+ * ,-------------. ,-------------.
+ * | | | | | |
+ * ,------|------|------| |------+------+------.
+ * | | | | | | | |
+ * | | |------| |------| | |
+ * | | | | | | | |
+ * `--------------------' `--------------------'
+ */
+// SYMBOLS
+[SYMB] = KEYMAP(
+ // left hand
+ M(0), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS,
+ KC_TRNS,ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), ACTION_MODS_KEY(MOD_RALT, KC_2), ACTION_MODS_KEY(MOD_RALT, KC_QUOT), ACTION_MODS_KEY(MOD_RALT, KC_BSLS),ACTION_MODS_KEY(MOD_RALT,KC_7),KC_TRNS,
+ KC_TRNS,ACTION_MODS_KEY(MOD_RALT,KC_3),KC_BSLS, ACTION_MODS_KEY(MOD_LSFT, KC_8), ACTION_MODS_KEY(MOD_RSFT, KC_9),ACTION_MODS_KEY(MOD_LSFT,KC_EQL),
+ KC_TRNS,ACTION_MODS_KEY(MOD_LSFT,KC_5),KC_EQL, ACTION_MODS_KEY(MOD_RALT, KC_LBRC), ACTION_MODS_KEY(MOD_RALT, KC_RBRC),ACTION_MODS_KEY(MOD_RALT,KC_EQL),KC_TRNS,
+ KC_TRNS,EPRM,KC_TRNS,KC_NONUS_BSLASH, ACTION_MODS_KEY(MOD_LSFT, KC_NONUS_BSLASH)/*KC_TRNS,KC_TRNS*/,
+ KC_TRNS,KC_TRNS,
+ KC_TRNS,
+ KC_TRNS,KC_TRNS,KC_TRNS,
+ // right hand
+ KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11,
+ KC_TRNS, KC_UP, KC_7, KC_8, KC_9, ACTION_MODS_KEY(MOD_RSFT,KC_3), KC_F12,
+ KC_DOWN, KC_4, KC_5, KC_6, ACTION_MODS_KEY(MOD_RSFT,KC_1), KC_TRNS,
+ KC_TRNS, ACTION_MODS_KEY(MOD_RSFT,KC_6), KC_1, KC_2, KC_3, ACTION_MODS_KEY(MOD_RALT,KC_NONUS_BSLASH), KC_TRNS,
+ ACTION_MODS_KEY(MOD_RSFT,KC_MINS),KC_DOT, KC_0, KC_EQL, KC_TRNS,
+ KC_TRNS, KC_TRNS,
+ KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS
+),
+/* Keymap 2: Media and mouse keys
+ *
+ * ,--------------------------------------------------. ,--------------------------------------------------.
+ * | RESET | | | | | | | | | | | | | | RESET |
+ * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
+ * | | | | MsUp | | | | | | |H_UL | |H_OL | | |
+ * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
+ * | | |MsLeft|MsDown|MsRght| |------| |------| | | |H_LI | | Play |
+ * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
+ * | | |H_CODE| |H_BR | | | | | | | Prev | Next | | |
+ * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
+ * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | |
+ * `----------------------------------' `----------------------------------'
+ * ,-------------. ,-------------.
+ * | | | | | |
+ * ,------|------|------| |------+------+------.
+ * |Enter | | | | | |Brwser|
+ * | | |------| |------| |Back |
+ * | | | | | | | |
+ * `--------------------' `--------------------'
+ */
+// MEDIA AND MOUSE
+[MDIA] = KEYMAP(
+ RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, HTML_CODE, KC_TRNS, HTML_BR, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2,
+ KC_TRNS, KC_TRNS,
+ KC_TRNS,
+ KC_ENT, KC_TRNS, KC_TRNS,
+ // right hand
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,
+ KC_TRNS, KC_TRNS, HTML_UL, KC_TRNS, HTML_OL, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, HTML_LI, KC_TRNS, KC_MPLY,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS,
+ KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS,
+ KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_WBAK
+),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+ [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols)
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ // MACRODOWN only works in this function
+ switch(id) {
+ case 0:
+ if (record->event.pressed) {
+ SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
+ }
+ break;
+ case 1:
+ if (record->event.pressed) { // For resetting EEPROM
+ eeconfig_init();
+ }
+ break;
+ case 10:
+ if (record->event.pressed) {
+ SEND_TAG("li");
+ }
+ break;
+ case 11:
+ if (record->event.pressed) {
+ SEND_TAG("ul");
+ }
+ break;
+ case 12:
+ if (record->event.pressed) {
+ SEND_TAG("ol");
+ }
+ break;
+ case 13:
+ if (record->event.pressed) {
+ SEND_TAG("code");
+ }
+ break;
+ case 14:
+ if (record->event.pressed) {
+ SEND_SHORT_TAG("br");
+ }
+ }
+ return MACRO_NONE;
+};
+
+// Runs just one time when the keyboard initializes.
+void matrix_init_user(void) {
+
+};
+
+// Runs constantly in the background, in a loop.
+void matrix_scan_user(void) {
+
+ uint8_t layer = biton32(layer_state);
+
+ switch (layer) {
+ // TODO: Make this relevant to the ErgoDox EZ.
+ case 0:
+ ergodox_board_led_off();
+ ergodox_right_led_1_off();
+ ergodox_right_led_2_off();
+ ergodox_right_led_3_off();
+
+ #ifdef SUBPROJECT_infinity
+ lcd_backlight_hal_color(0, 0, 0);
+ #endif
+ break;
+ case 1:
+ ergodox_right_led_1_on();
+
+ ergodox_board_led_off();
+ ergodox_right_led_2_off();
+ ergodox_right_led_3_off();
+ #ifdef SUBPROJECT_infinity
+ lcd_backlight_hal_color(5000, 0, 0);
+ #endif
+ break;
+ case 2:
+ ergodox_right_led_2_on();
+
+ ergodox_board_led_off();
+ ergodox_right_led_1_off();
+ ergodox_right_led_3_off();
+ #ifdef SUBPROJECT_infinity
+ lcd_backlight_hal_color(0, 5000, 0);
+ #endif
+ break;
+ default:
+ // none
+ break;
+ }
+
+};
+
+void send_key(uint16_t keycode) {
+ register_code(keycode);
+ unregister_code(keycode);
+}
+
+void go_back_based_on_tag(char* tag) {
+ const int BRACKETS_AND_SLASH_LENGTH = 3;
+
+ for (int i=0; i < strlen(tag) + BRACKETS_AND_SLASH_LENGTH; i++) {
+ send_key(KC_LEFT);
+ }
+}
+
+void send_larger_than() {
+ register_code(KC_LSFT);
+ send_key(KC_NONUS_BSLASH);
+ unregister_code(KC_LSFT);
+}
diff --git a/keyboards/ergodox/keymaps/swissgerman/readme.md b/keyboards/ergodox/keymaps/swissgerman/readme.md
new file mode 100644
index 0000000000..b1061c1dd1
--- /dev/null
+++ b/keyboards/ergodox/keymaps/swissgerman/readme.md
@@ -0,0 +1,15 @@
+# ErgoDox Swiss German Configuration
+
+Swiss German keyboard layout based on the Ergodox EZ default layout.
+
+Keyboard diagrams created with the [keyboard layout editor](http://www.keyboard-layout-editor.com).
+
+Diagram sources: [default layer](keyboard-layout.json), [layer 1 & 2](keyboard-layout_1_2.json)
+
+![Layout Layer 0](keyboard-layout.png)
+![Layout Layer 1&2](keyboard-layout_1_2.png)
+
+## Changelog
+* Jan 21, 2017:
+ * Initial version based on default layout.
+
diff --git a/keyboards/lets_split/config.h b/keyboards/lets_split/config.h
index 4db45ab0b3..7df0c57527 100644
--- a/keyboards/lets_split/config.h
+++ b/keyboards/lets_split/config.h
@@ -20,49 +20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "config_common.h"
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x3060
-#define DEVICE_VER 0x0001
-#define MANUFACTURER Wootpatoot
-#define PRODUCT Lets Split
-#define DESCRIPTION A split keyboard for the cheap makers
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-// #define BACKLIGHT_LEVELS 3
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCING_DELAY 5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* key combination for command */
-#define IS_COMMAND() ( \
- keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
#ifdef SUBPROJECT_rev1
#include "rev1/config.h"
#endif
diff --git a/keyboards/lets_split/keymaps/default/keymap.c b/keyboards/lets_split/keymaps/default/keymap.c
deleted file mode 100644
index 6f1f71f5f8..0000000000
--- a/keyboards/lets_split/keymaps/default/keymap.c
+++ /dev/null
@@ -1,188 +0,0 @@
-#include "lets_split.h"
-#include "action_layer.h"
-#include "eeconfig.h"
-
-extern keymap_config_t keymap_config;
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _QWERTY 0
-#define _COLEMAK 1
-#define _DVORAK 2
-#define _LOWER 3
-#define _RAISE 4
-#define _ADJUST 16
-
-enum custom_keycodes {
- QWERTY = SAFE_RANGE,
- COLEMAK,
- DVORAK,
- LOWER,
- RAISE,
- ADJUST,
-};
-
-// Fillers to make layering more clear
-#define _______ KC_TRNS
-#define XXXXXXX KC_NO
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-/* Qwerty
- * ,-----------------------------------------------------------------------------------.
- * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Esc | A | S | D | F | G | H | J | K | L | ; | " |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right |
- * `-----------------------------------------------------------------------------------'
- */
-[_QWERTY] = KEYMAP( \
- KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \
- KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \
- KC_LCTL, ADJUST, KC_LALT, KC_LGUI, LOWER, KC_SPC, MT(MOD_LSFT, KC_SPC), RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
-),
-
-/* Colemak
- * ,-----------------------------------------------------------------------------------.
- * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Esc | A | R | S | T | D | H | N | E | I | O | " |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right |
- * `-----------------------------------------------------------------------------------'
- */
-[_COLEMAK] = KEYMAP( \
- KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, \
- KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, \
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \
- ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
-),
-
-/* Dvorak
- * ,-----------------------------------------------------------------------------------.
- * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Esc | A | O | E | U | I | D | H | T | N | S | / |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right |
- * `-----------------------------------------------------------------------------------'
- */
-[_DVORAK] = KEYMAP( \
- KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, \
- KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, \
- KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT , \
- ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
-),
-[3] = KEYMAP( \
- KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \
- KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
- _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \
- _______, _______, _______, _______, _______, KC_BSPC, MT(MOD_LSFT, KC_BSPC), _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
-),
-[4] = KEYMAP( \
- KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, \
- KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \
- _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \
- _______, _______, _______, _______, _______, KC_ENT, MT(MOD_LSFT, KC_ENT), _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
-),
-
-/* Adjust (Lower + Raise)
- * ,-----------------------------------------------------------------------------------.
- * | | Reset| | | | | | | | | | Del |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * | | | | | | | | | | | | |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * | | | | | | | | | | | |
- * `-----------------------------------------------------------------------------------'
- */
-[_ADJUST] = KEYMAP( \
- _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \
- _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \
- _______, RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD, _______, _______, _______, \
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
-)
-};
-
-#ifdef AUDIO_ENABLE
-float tone_qwerty[][2] = SONG(QWERTY_SOUND);
-float tone_dvorak[][2] = SONG(DVORAK_SOUND);
-float tone_colemak[][2] = SONG(COLEMAK_SOUND);
-#endif
-
-void persistant_default_layer_set(uint16_t default_layer) {
- eeconfig_update_default_layer(default_layer);
- default_layer_set(default_layer);
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
- switch (keycode) {
- case QWERTY:
- if (record->event.pressed) {
- #ifdef AUDIO_ENABLE
- PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
- #endif
- persistant_default_layer_set(1UL<<_QWERTY);
- }
- return false;
- break;
- case COLEMAK:
- if (record->event.pressed) {
- #ifdef AUDIO_ENABLE
- PLAY_NOTE_ARRAY(tone_colemak, false, 0);
- #endif
- persistant_default_layer_set(1UL<<_COLEMAK);
- }
- return false;
- break;
- case DVORAK:
- if (record->event.pressed) {
- #ifdef AUDIO_ENABLE
- PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
- #endif
- persistant_default_layer_set(1UL<<_DVORAK);
- }
- return false;
- break;
- case LOWER:
- if (record->event.pressed) {
- layer_on(_LOWER);
- update_tri_layer(_LOWER, _RAISE, _ADJUST);
- } else {
- layer_off(_LOWER);
- update_tri_layer(_LOWER, _RAISE, _ADJUST);
- }
- return false;
- break;
- case RAISE:
- if (record->event.pressed) {
- layer_on(_RAISE);
- update_tri_layer(_LOWER, _RAISE, _ADJUST);
- } else {
- layer_off(_RAISE);
- update_tri_layer(_LOWER, _RAISE, _ADJUST);
- }
- return false;
- break;
- case ADJUST:
- if (record->event.pressed) {
- layer_on(_ADJUST);
- } else {
- layer_off(_ADJUST);
- }
- return false;
- break;
- }
- return true;
-} \ No newline at end of file
diff --git a/keyboards/lets_split/keymaps/i2c/config.h b/keyboards/lets_split/keymaps/i2c/config.h
index 72e5ae66ba..efe8bb0f2b 100644
--- a/keyboards/lets_split/keymaps/i2c/config.h
+++ b/keyboards/lets_split/keymaps/i2c/config.h
@@ -14,89 +14,14 @@ GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x3060
-#define DEVICE_VER 0x0001
-#define MANUFACTURER Wootpatoot
-#define PRODUCT Lets Split
-#define DESCRIPTION A split keyboard for the cheap makers
-
-/* key matrix size */
-// Rows are doubled-up
-#define MATRIX_ROWS 8
-#define MATRIX_COLS 6
-
-// wiring of each half
-#define MATRIX_ROW_PINS { B5, B4, E6, D7 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3 }
-
-#define CATERINA_BOOTLOADER
-
#define USE_I2C
-// Use serial if not using I2C
-#ifndef USE_I2C
-# define USE_SERIAL
-#endif
-
-// #define EE_HANDS
-
#define I2C_MASTER_LEFT
// #define I2C_MASTER_RIGHT
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-// #define BACKLIGHT_LEVELS 3
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCING_DELAY 5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* key combination for command */
-#define IS_COMMAND() ( \
- keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-/* ws2812 RGB LED */
-#define RGB_DI_PIN D4
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 8 // Number of LEDs
-#define RGBLIGHT_HUE_STEP 10
-#define RGBLIGHT_SAT_STEP 17
-#define RGBLIGHT_VAL_STEP 17
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-// #define NO_DEBUG
-
-/* disable print */
-// #define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
+#ifdef SUBPROJECT_rev1
+ #include "../../rev1/config.h"
#endif
+#ifdef SUBPROJECT_rev2
+ #include "../../rev2/config.h"
+#endif \ No newline at end of file
diff --git a/keyboards/lets_split/keymaps/serial/config.h b/keyboards/lets_split/keymaps/serial/config.h
index b0ad522fcb..cd766cc4f1 100644
--- a/keyboards/lets_split/keymaps/serial/config.h
+++ b/keyboards/lets_split/keymaps/serial/config.h
@@ -15,88 +15,15 @@ You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#ifndef CONFIG_H
-#define CONFIG_H
-#include "config_common.h"
+#define USE_SERIAL
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x3060
-#define DEVICE_VER 0x0001
-#define MANUFACTURER Wootpatoot
-#define PRODUCT Lets Split
-#define DESCRIPTION A split keyboard for the cheap makers
+#define EE_HANDS
-/* key matrix size */
-// Rows are doubled-up
-#define MATRIX_ROWS 8
-#define MATRIX_COLS 6
-
-// wiring of each half
-#define MATRIX_ROW_PINS { B5, B4, E6, D7 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3 }
-
-#define CATERINA_BOOTLOADER
-
-// #define USE_I2C
-
-// Use serial if not using I2C
-#ifndef USE_I2C
-# define USE_SERIAL
-#endif
-
-// #define EE_HANDS
-
-#define I2C_MASTER_LEFT
-// #define I2C_MASTER_RIGHT
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-// #define BACKLIGHT_LEVELS 3
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCING_DELAY 5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* key combination for command */
-#define IS_COMMAND() ( \
- keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-/* ws2812 RGB LED */
-#define RGB_DI_PIN D4
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 8 // Number of LEDs
-#define RGBLIGHT_HUE_STEP 10
-#define RGBLIGHT_SAT_STEP 17
-#define RGBLIGHT_VAL_STEP 17
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-// #define NO_DEBUG
-
-/* disable print */
-// #define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
+#ifdef SUBPROJECT_rev1
+ #include "../../rev1/config.h"
#endif
+#ifdef SUBPROJECT_rev2
+ #include "../../rev2/config.h"
+#endif \ No newline at end of file
diff --git a/keyboards/lets_split/rev1/config.h b/keyboards/lets_split/rev1/config.h
index 825e5ec245..2f5bde9531 100644
--- a/keyboards/lets_split/rev1/config.h
+++ b/keyboards/lets_split/rev1/config.h
@@ -25,7 +25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define PRODUCT_ID 0x3060
#define DEVICE_VER 0x0001
#define MANUFACTURER Wootpatoot
-#define PRODUCT Lets Split
#define PRODUCT Lets Split v1
#define DESCRIPTION A split keyboard for the cheap makers
@@ -37,19 +36,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// wiring of each half
#define MATRIX_ROW_PINS { B5, B4, E6, D7 }
#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3 }
+// #define MATRIX_COL_PINS { B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order
-#define CATERINA_BOOTLOADER
-
-// #define USE_I2C
-// Use serial if not using I2C
-#ifndef USE_I2C
-# define USE_SERIAL
-#endif
-// #define EE_HANDS
-
-#define I2C_MASTER_LEFT
-// #define I2C_MASTER_RIGHT
+#define CATERINA_BOOTLOADER
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/lets_split/rev2/config.h b/keyboards/lets_split/rev2/config.h
index e9689d773d..b34d7c0047 100644
--- a/keyboards/lets_split/rev2/config.h
+++ b/keyboards/lets_split/rev2/config.h
@@ -36,21 +36,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// wiring of each half
#define MATRIX_ROW_PINS { D7, E6, B4, B5 }
#define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 }
+// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6 } //uncomment this line and comment line above if you need to reverse left-to-right key order
#define CATERINA_BOOTLOADER
-// #define USE_I2C
-
-// Use serial if not using I2C
-#ifndef USE_I2C
-# define USE_SERIAL
-#endif
-
-// #define EE_HANDS
-
-#define I2C_MASTER_LEFT
-// #define I2C_MASTER_RIGHT
-
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/lets_split/rev2/rev2.h b/keyboards/lets_split/rev2/rev2.h
index 990976de2b..7c397912f5 100644
--- a/keyboards/lets_split/rev2/rev2.h
+++ b/keyboards/lets_split/rev2/rev2.h
@@ -9,10 +9,10 @@
//void promicro_bootloader_jmp(bool program);
#define KEYMAP( \
- k00, k01, k02, k03, k04, k05, k45, k44, k43, k42, k41, k40, \
- k10, k11, k12, k13, k14, k15, k55, k54, k53, k52, k51, k50, \
- k20, k21, k22, k23, k24, k25, k65, k64, k63, k62, k61, k60, \
- k30, k31, k32, k33, k34, k35, k75, k74, k73, k72, k71, k70 \
+ k00, k01, k02, k03, k04, k05, k40, k41, k42, k43, k44, k45, \
+ k10, k11, k12, k13, k14, k15, k50, k51, k52, k53, k54, k55, \
+ k20, k21, k22, k23, k24, k25, k60, k61, k62, k63, k64, k65, \
+ k30, k31, k32, k33, k34, k35, k70, k71, k72, k73, k74, k75 \
) \
{ \
{ k00, k01, k02, k03, k04, k05 }, \
diff --git a/keyboards/planck/keymaps/callum/keymap.c b/keyboards/planck/keymaps/callum/keymap.c
index 4d0151710e..a1254d9755 100644
--- a/keyboards/planck/keymaps/callum/keymap.c
+++ b/keyboards/planck/keymaps/callum/keymap.c
@@ -7,22 +7,21 @@
extern keymap_config_t keymap_config;
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
#define _BASE 0
#define _MOVE 1
#define _SYMB 2
#define _MOUSE 3
#define _FUNC 4
+#define CMDLEFT LGUI(KC_LEFT)
+#define CMDRGHT LGUI(KC_RGHT)
+#define ENDASH LALT(KC_MINS)
+#define POUND LALT(KC_3)
+
enum planck_keycodes {
MOVE = SAFE_RANGE,
SYMB,
- FUNC,
- BELOW,
- ABOVE
+ FUNC
};
// Fillers to make layering more clear
@@ -55,16 +54,16 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | Del | Caps | Left | Down | Right| | | Left | Down | Right| Caps | Del |
* |------+------+------+------+------+------+------+------+------+------+------+------|
- * | | | | Pg Up| Pg Dn| Above| | Pg Dn| Pg Up| | | |
+ * | | | | Pg Up| Pg Dn| | | Pg Dn| Pg Up| | | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
- * | | | | | | Below| | | | | | |
+ * | | | | | | | | | | | | |
* `-----------------------------------------------------------------------------------'
*/
[_MOVE] = {
- {KC_ESC, XXXXXXX, LGUI(KC_LEFT), KC_UP, LGUI(KC_RGHT), XXXXXXX, XXXXXXX, LGUI(KC_LEFT), KC_UP, LGUI(KC_RGHT), XXXXXXX, KC_ESC },
+ {KC_ESC, XXXXXXX, CMDLEFT, KC_UP, CMDRGHT, XXXXXXX, XXXXXXX, CMDLEFT, KC_UP, CMDRGHT, XXXXXXX, KC_ESC },
{KC_DEL, KC_CAPS, KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, KC_CAPS, KC_DEL },
- {_______, XXXXXXX, XXXXXXX, KC_PGUP, KC_PGDN, ABOVE, XXXXXXX, KC_PGDN, KC_PGUP, XXXXXXX, XXXXXXX, _______},
- {_______, _______, _______, _______, _______, BELOW, _______, _______, _______, _______, _______, _______}
+ {_______, XXXXXXX, XXXXXXX, KC_PGUP, KC_PGDN, XXXXXXX, XXXXXXX, KC_PGDN, KC_PGUP, XXXXXXX, XXXXXXX, _______},
+ {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
},
/* SYMB
@@ -79,8 +78,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* `-----------------------------------------------------------------------------------'
*/
[_SYMB] = {
- {KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, LALT(KC_MINS)},
- {KC_DEL, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, LALT(KC_3)},
+ {KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, ENDASH },
+ {KC_DEL, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, POUND },
{_______, KC_TILD, KC_GRV, KC_PLUS, KC_EQL, KC_PIPE, KC_BSLS, KC_LBRC, KC_RBRC, KC_LCBR, KC_RCBR, _______},
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
},
@@ -153,30 +152,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
}
return false;
break;
- case BELOW:
- if (record->event.pressed) {
- register_code(KC_LGUI);
- register_code(KC_RGHT);
- unregister_code(KC_RGHT);
- unregister_code(KC_LGUI);
- register_code(KC_ENT);
- unregister_code(KC_ENT);
- }
- return false;
- break;
- case ABOVE:
- if (record->event.pressed) {
- register_code(KC_LGUI);
- register_code(KC_LEFT);
- unregister_code(KC_LEFT);
- unregister_code(KC_LGUI);
- register_code(KC_ENT);
- unregister_code(KC_ENT);
- register_code(KC_UP);
- unregister_code(KC_UP);
- }
- return false;
- break;
}
return true;
}
diff --git a/keyboards/planck/keymaps/callum/readme.md b/keyboards/planck/keymaps/callum/readme.md
index 0baeba46d9..f970cd974d 100644
--- a/keyboards/planck/keymaps/callum/readme.md
+++ b/keyboards/planck/keymaps/callum/readme.md
@@ -2,11 +2,11 @@
This is a layout for the grid planck, built with a few ideals in mind:
-- Minimal response times should be maintained. Keys that react differently depending on whether they are tapped or held, keys that react differently if they are double tapped, etc. should be avoided – they inevitably send their keycode later than a normal key – interrupting the immediate feedback from the screen. Therefore we restrict ourselves to chording as our only means of getting more than one symbol out of a single physical key.
+- Consistent and minimal response times should be maintained. Keys that react differently depending on whether they are tapped or held, keys that react differently if they are double tapped, etc. should be avoided – they inevitably send their keycode later than a normal key – interrupting the immediate feedback from the screen. Therefore we restrict ourselves to chording as our only means of getting more than one symbol out of a single physical key.
- The hands should never need to leave the home position. The usual culprit for this is the arrow cluster, so the arrow cluster should be as close to home as possible.
- There should be two of every modifier (one on each side), otherwise certain long key combinations become hard to make.
-We have five layers. A `BASE` layer, in colemak; a `MOVE` layer, with an arrow cluster and other movement keys; a `SYMB` layer, with numbers and symbols; a `FUNC` layer, with function keys and media keys; and a `MOUSE` layer, with mouse emulation.
+We have five layers. A `BASE` layer, in colemak; a `MOVE` layer, with an arrow cluster and other movement keys; a `SYMB` layer, with numbers and symbols; a `FUNC` layer, with function keys and media keys; and a `MOUSE` layer, with mouse emulation. The `MOUSE` layer is activated by holding the Move and Symb keys simultaniously.
```
/* BASE
@@ -27,9 +27,9 @@ We have five layers. A `BASE` layer, in colemak; a `MOVE` layer, with an arrow c
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | Del | Caps | Left | Down | Right| | | Left | Down | Right| Caps | Del |
* |------+------+------+------+------+------+------+------+------+------+------+------|
- * | | | | Pg Up| Pg Dn| Above| | Pg Dn| Pg Up| | | |
+ * | | | | Pg Up| Pg Dn| | | Pg Dn| Pg Up| | | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
- * | | | | | | Below| | | | | | |
+ * | | | | | | | | | | | | |
* `-----------------------------------------------------------------------------------'
*/
@@ -63,9 +63,9 @@ We have five layers. A `BASE` layer, in colemak; a `MOVE` layer, with an arrow c
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | F11 | F12 | F13 | F14 | F15 | F16 | F17 | F18 | F19 | F20 | Vol- |
* |------+------+------+------+------+------+------+------+------+------+------+------|
- * | | F21 | F22 | F23 | F24 | | | Lock | | | | |
+ * | | F21 | F22 | F23 | F24 | | | Power| | | | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | Prev | Mute | Play | Next | | | | |
* `-----------------------------------------------------------------------------------'
*/
-```
+ ```
diff --git a/keyboards/planck/keymaps/cbbrowne/Makefile b/keyboards/planck/keymaps/cbbrowne/Makefile
index b1c70ace70..19e5c2a844 100644
--- a/keyboards/planck/keymaps/cbbrowne/Makefile
+++ b/keyboards/planck/keymaps/cbbrowne/Makefile
@@ -12,11 +12,11 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
-AUDIO_ENABLE = yes # Audio output on port C6
+AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
-API_SYSEX_ENABLE = yes # Enable SYSEX API (+5390)
+API_SYSEX_ENABLE = no # Enable SYSEX API (+5390)
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
diff --git a/keyboards/planck/keymaps/cbbrowne/keymap.c b/keyboards/planck/keymaps/cbbrowne/keymap.c
index 2be4dab4b1..0448a8d11c 100644
--- a/keyboards/planck/keymaps/cbbrowne/keymap.c
+++ b/keyboards/planck/keymaps/cbbrowne/keymap.c
@@ -110,15 +110,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
},
[_RAISE] = { /* RAISE */
{KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC},
- {_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS},
- {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, QWERTY, KEYPAD, KEYPAD, ALTSLASH,_______},
- {_______, _______, _______, _______, _______, _______, _______, _______, KC_PGDN, KC_VOLD, KC_VOLU, KC_PGUP}
+ {_______, KC_4, KC_5, KC_6, _______, _______, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS},
+ {_______, KC_7, KC_8, KC_9, _______, _______, _______, QWERTY, KEYPAD, KEYPAD, ALTSLASH,_______},
+ {_______, KC_0, _______, _______, _______, _______, _______, _______, KC_PGDN, KC_HOME, KC_END, KC_PGUP}
},
[_LOWER] = { /* LOWER */
{KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC},
{_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE},
{_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, QWERTY, KEYPAD, KEYPAD, ALTSLASH, _______},
- {_______, KEYPAD, _______, _______, _______, _______, _______, _______, KC_PGDN, KC_VOLD, KC_VOLU, KC_PGUP}
+ {_______, KEYPAD, _______, _______, _______, _______, _______, _______, KC_PGDN, KC_HOME, KC_END, KC_PGUP}
},
[_KEYPAD] = { /* Key Pad */
{KC_ESC, USERNAME, MVERSION, KC_F10, KC_F11, KC_F12, KC_PGUP, KC_KP_ENTER, KC_7, KC_8, KC_9, KC_BSPC},
diff --git a/keyboards/ps2avrGB/Makefile b/keyboards/ps2avrGB/Makefile
new file mode 100644
index 0000000000..57b2ef62e5
--- /dev/null
+++ b/keyboards/ps2avrGB/Makefile
@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+ include ../../Makefile
+endif
diff --git a/keyboards/ps2avrGB/README.md b/keyboards/ps2avrGB/README.md
new file mode 100644
index 0000000000..f8360aec0c
--- /dev/null
+++ b/keyboards/ps2avrGB/README.md
@@ -0,0 +1,61 @@
+ps2avrGB keyboard firmware
+==========================
+
+This is a port of the QMK firmware for boards that are based on the
+ps2avrGB firmware, like the [ps2avrGB
+keyboard](https://www.keyclack.com/product/gb-ps2avrgb/) or the ones sold
+by [Winkeyless](http://winkeyless.kr/product/ps2avrgb-parts/).
+
+Note that this is a complete replacement for the firmware, so you won't be
+using Bootmapper Client to change any keyboard settings, since not all the
+USB report options are supported.
+
+## Supported Boards
+
+Only the [B.mini X2](http://winkeyless.kr/product/b-mini-x2-pcb/) has been
+tested so far (since it's the only one I own). But other boards that use
+the ps2avrGB firmware should work as well.
+
+## Installing
+
+First, install the requirements. These commands are for OSX, but all you
+need is the AVR toolchain and `bootloadHID` for flashing:
+
+```
+$ brew cask install crosspack-avr
+$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
+```
+
+In order to use the `./program` script, which can reboot the board into
+the bootloader, you'll need Python 2 with PyUSB installed:
+
+```
+$ pip install pyusb
+```
+
+Then, with the keyboard plugged in, simply run this command from the
+`qmk_firmware` directory:
+
+```
+$ make ps2avrGB-program
+```
+
+If you prefer, you can just build it and flash the firmware directly with
+`bootloadHID` if you boot the board while holding down `L_Ctrl` to keep it
+in the bootloader:
+
+```
+$ make ps2avrGB
+$ bootloadHID -r ps2avrGB_default.hex
+```
+
+## Troubleshooting
+
+From my experience, it's really hard to brick these boards. But these
+tricks have been useful when it got stuck in a weird scenario.
+
+1. Try plugging the board in while pressing `L_Ctrl`. This will force it
+ to boot only the bootloader without loading the firmware. Once this is
+ done, just reflash the board with the original firmware.
+2. Sometimes USB hubs can act weird, so try connecting the board directly
+ to your computer or plugging/unplugging the USB hub.
diff --git a/keyboards/ps2avrGB/config.h b/keyboards/ps2avrGB/config.h
new file mode 100644
index 0000000000..b5c696f3f8
--- /dev/null
+++ b/keyboards/ps2avrGB/config.h
@@ -0,0 +1,38 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#define VENDOR_ID 0x20A0
+#define PRODUCT_ID 0x422D
+// TODO: share these strings with usbconfig.h
+// Edit usbconfig.h to change these.
+#define MANUFACTURER winkeyless.kr
+#define PRODUCT ps2avrGB
+
+/* matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 15
+
+#define NO_UART 1
+#define BOOTLOADHID_BOOTLOADER 1
+
+/* key combination for command */
+#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+#endif
diff --git a/keyboards/ps2avrGB/keymaps/default/keymap.c b/keyboards/ps2avrGB/keymaps/default/keymap.c
new file mode 100644
index 0000000000..5c66cde596
--- /dev/null
+++ b/keyboards/ps2avrGB/keymaps/default/keymap.c
@@ -0,0 +1,32 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "ps2avrGB.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ KEYMAP( \
+ ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,HOME,END, \
+ GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, DEL, \
+ TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, INS, \
+ CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT,ENT, PGUP,\
+ LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH,RSFT, UP, PGDN,\
+ LCTL,LALT,LGUI, SPC, RGUI,RALT,RCTL,LEFT,DOWN,RGHT \
+ ),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+};
diff --git a/keyboards/ps2avrGB/matrix.c b/keyboards/ps2avrGB/matrix.c
new file mode 100644
index 0000000000..beaa54c400
--- /dev/null
+++ b/keyboards/ps2avrGB/matrix.c
@@ -0,0 +1,104 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <avr/io.h>
+#include <util/delay.h>
+
+#include "matrix.h"
+
+#ifndef DEBOUNCE
+# define DEBOUNCE 5
+#endif
+
+static uint8_t debouncing = DEBOUNCE;
+
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+void matrix_init(void) {
+ // all outputs for rows high
+ DDRB = 0xFF;
+ PORTB = 0xFF;
+ // all inputs for columns
+ DDRA = 0x00;
+ DDRC &= ~(0x111111<<2);
+ DDRD &= ~(1<<PIND7);
+ // all columns are pulled-up
+ PORTA = 0xFF;
+ PORTC |= (0b111111<<2);
+ PORTD |= (1<<PIND7);
+
+ // initialize matrix state: all keys off
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ matrix[row] = 0x00;
+ matrix_debouncing[row] = 0x00;
+ }
+}
+
+void matrix_set_row_status(uint8_t row) {
+ DDRB = (1 << row);
+ PORTB = ~(1 << row);
+}
+
+uint8_t bit_reverse(uint8_t x) {
+ x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa);
+ x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc);
+ x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0);
+ return x;
+}
+
+uint8_t matrix_scan(void) {
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ matrix_set_row_status(row);
+ _delay_us(5);
+
+ matrix_row_t cols = (
+ // cols 0..7, PORTA 0 -> 7
+ (~PINA) & 0xFF
+ ) | (
+ // cols 8..13, PORTC 7 -> 0
+ bit_reverse((~PINC) & 0xFF) << 8
+ ) | (
+ // col 14, PORTD 7
+ ((~PIND) & (1 << PIND7)) << 7
+ );
+
+ if (matrix_debouncing[row] != cols) {
+ matrix_debouncing[row] = cols;
+ debouncing = DEBOUNCE;
+ }
+ }
+
+ if (debouncing) {
+ if (--debouncing) {
+ _delay_ms(1);
+ } else {
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ matrix[i] = matrix_debouncing[i];
+ }
+ }
+ }
+
+ return 1;
+}
+
+inline matrix_row_t matrix_get_row(uint8_t row) {
+ return matrix[row];
+}
+
+void matrix_print(void) {
+}
diff --git a/keyboards/ps2avrGB/program b/keyboards/ps2avrGB/program
new file mode 100755
index 0000000000..a88d9cd9b0
--- /dev/null
+++ b/keyboards/ps2avrGB/program
@@ -0,0 +1,74 @@
+#!/usr/bin/env python
+# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+from __future__ import print_function
+
+import os
+import sys
+import time
+import usb
+
+if len(sys.argv) < 2:
+ print('Usage: %s <firmware.hex>' % sys.argv[0])
+ sys.exit(1)
+
+print('Searching for ps2avrGB... ', end='')
+
+dev = usb.core.find(idVendor=0x20A0, idProduct=0x422D)
+if dev is None:
+ raise ValueError('Device not found')
+
+print('Found', end='\n\n')
+
+print('Device Information:')
+print(' idVendor: %d (0x%04x)' % (dev.idVendor, dev.idVendor))
+print(' idProduct: %d (0x%04x)' % (dev.idProduct, dev.idProduct))
+print('Manufacturer: %s' % (dev.iManufacturer))
+print('Serial: %s' % (dev.iSerialNumber))
+print('Product: %s' % (dev.iProduct), end='\n\n')
+
+print('Transferring control to bootloader... ', end='')
+
+dev.set_configuration()
+
+request_type = usb.util.build_request_type(
+ usb.util.CTRL_OUT,
+ usb.util.CTRL_TYPE_CLASS,
+ usb.util.CTRL_RECIPIENT_DEVICE)
+
+USBRQ_HID_SET_REPORT = 0x09
+HID_REPORT_OPTION = 0x0301
+
+
+try:
+ dev.ctrl_transfer(
+ request_type,
+ USBRQ_HID_SET_REPORT,
+ HID_REPORT_OPTION,
+ 0,
+ [0, 0, 0xFF] + [0] * 5
+ )
+except usb.core.USBError:
+ # for some reason I keep getting USBError, but it works!
+ pass
+
+# wait a bit until bootloader starts up
+time.sleep(2)
+
+print('OK')
+print('Programming...')
+if os.system('bootloadHID -r "%s"' % sys.argv[1]) == 0:
+ print('\nDone!')
diff --git a/keyboards/ps2avrGB/ps2avrGB.c b/keyboards/ps2avrGB/ps2avrGB.c
new file mode 100644
index 0000000000..e69de29bb2
--- /dev/null
+++ b/keyboards/ps2avrGB/ps2avrGB.c
diff --git a/keyboards/ps2avrGB/ps2avrGB.h b/keyboards/ps2avrGB/ps2avrGB.h
new file mode 100644
index 0000000000..6432e3be9c
--- /dev/null
+++ b/keyboards/ps2avrGB/ps2avrGB.h
@@ -0,0 +1,43 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef KEYMAP_COMMON_H
+#define KEYMAP_COMMON_H
+
+#include "keycode.h"
+#include "action.h"
+
+#define KEYMAP( \
+ K05, K25, K35, K45, K55, K06, KA6, KA7, K07, KB5, KC5, KD5, KE5, KD1, KE1, KE2, \
+ K04, K14, K24, K34, K44, K54, K16, KB6, KB7, K17, KA4, KB4, KC4, KE4, KD0, \
+ K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC3, KD3, K67, \
+ K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, KB2, KD2, KE0, \
+ K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KB1, K86, K77, \
+ K00, K10, K20, K56, K57, KB0, KC0, K66, K76, K96 \
+) \
+{ \
+ { KC_##K00, KC_##K10, KC_##K20, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_##KB0, KC_##KC0, KC_##KD0, KC_##KE0 }, \
+ { KC_##K01, KC_##K11, KC_##K21, KC_##K31, KC_##K41, KC_##K51, KC_NO, KC_NO, KC_NO, KC_NO, KC_##KA1, KC_##KB1, KC_NO, KC_##KD1, KC_##KE1 }, \
+ { KC_##K02, KC_##K12, KC_##K22, KC_##K32, KC_##K42, KC_##K52, KC_NO, KC_NO, KC_NO, KC_NO, KC_##KA2, KC_##KB2, KC_NO, KC_##KD2, KC_##KE2 }, \
+ { KC_##K03, KC_##K13, KC_##K23, KC_##K33, KC_##K43, KC_##K53, KC_NO, KC_NO, KC_NO, KC_NO, KC_##KA3, KC_##KB3, KC_##KC3, KC_##KD3, KC_NO }, \
+ { KC_##K04, KC_##K14, KC_##K24, KC_##K34, KC_##K44, KC_##K54, KC_NO, KC_NO, KC_NO, KC_NO, KC_##KA4, KC_##KB4, KC_##KC4, KC_NO, KC_##KE4 }, \
+ { KC_##K05, KC_NO, KC_##K25, KC_##K35, KC_##K45, KC_##K55, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_##KB5, KC_##KC5, KC_##KD5, KC_##KE5 }, \
+ { KC_##K06, KC_##K16, KC_##K26, KC_##K36, KC_##K46, KC_##K56, KC_##K66, KC_##K76, KC_##K86, KC_##K96, KC_##KA6, KC_##KB6, KC_##KC6, KC_##KD6, KC_##KE6 }, \
+ { KC_##K07, KC_##K17, KC_##K27, KC_##K37, KC_##K47, KC_##K57, KC_##K67, KC_##K77, KC_NO, KC_NO, KC_##KA7, KC_##KB7, KC_##KC7, KC_##KD7, KC_##KE7 } \
+}
+
+#endif
diff --git a/keyboards/ps2avrGB/rules.mk b/keyboards/ps2avrGB/rules.mk
new file mode 100644
index 0000000000..e2b5922ea2
--- /dev/null
+++ b/keyboards/ps2avrGB/rules.mk
@@ -0,0 +1,43 @@
+# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# MCU name
+MCU = atmega32a
+PROTOCOL = VUSB
+
+# unsupported features for now
+NO_UART = yes
+NO_SUSPEND_POWER_DOWN = yes
+BACKLIGHT_ENABLE = no
+
+# processor frequency
+F_CPU = 12000000
+
+# build options
+BOOTMAGIC_ENABLE = yes
+MOUSEKEY_ENABLE = yes
+EXTRAKEY_ENABLE = yes
+CONSOLE_ENABLE = yes
+COMMAND_ENABLE = yes
+
+OPT_DEFS = -DDEBUG_LEVEL=0
+OPT_DEFS += -DBOOTLOADER_SIZE=2048
+
+# custom matrix setup
+CUSTOM_MATRIX = yes
+SRC = matrix.c
+
+# programming options
+PROGRAM_CMD = ./keyboards/ps2avrGB/program $(TARGET).hex
diff --git a/keyboards/ps2avrGB/usbconfig.h b/keyboards/ps2avrGB/usbconfig.h
new file mode 100644
index 0000000000..d2d848fcdc
--- /dev/null
+++ b/keyboards/ps2avrGB/usbconfig.h
@@ -0,0 +1,396 @@
+/* Name: usbconfig.h
+ * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
+ * Author: Christian Starkjohann
+ * Creation Date: 2005-04-01
+ * Tabsize: 4
+ * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
+ * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
+ * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
+ */
+
+#ifndef __usbconfig_h_included__
+#define __usbconfig_h_included__
+
+#include "config.h"
+
+/*
+General Description:
+This file is an example configuration (with inline documentation) for the USB
+driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is
+also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may
+wire the lines to any other port, as long as D+ is also wired to INT0 (or any
+other hardware interrupt, as long as it is the highest level interrupt, see
+section at the end of this file).
+*/
+
+/* ---------------------------- Hardware Config ---------------------------- */
+
+#define USB_CFG_IOPORTNAME D
+/* This is the port where the USB bus is connected. When you configure it to
+ * "B", the registers PORTB, PINB and DDRB will be used.
+ */
+#define USB_CFG_DMINUS_BIT 3
+/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
+ * This may be any bit in the port.
+ */
+#define USB_CFG_DPLUS_BIT 2
+/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
+ * This may be any bit in the port. Please note that D+ must also be connected
+ * to interrupt pin INT0! [You can also use other interrupts, see section
+ * "Optional MCU Description" below, or you can connect D- to the interrupt, as
+ * it is required if you use the USB_COUNT_SOF feature. If you use D- for the
+ * interrupt, the USB interrupt will also be triggered at Start-Of-Frame
+ * markers every millisecond.]
+ */
+#define USB_CFG_CLOCK_KHZ (F_CPU/1000)
+/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
+ * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
+ * require no crystal, they tolerate +/- 1% deviation from the nominal
+ * frequency. All other rates require a precision of 2000 ppm and thus a
+ * crystal!
+ * Since F_CPU should be defined to your actual clock rate anyway, you should
+ * not need to modify this setting.
+ */
+#define USB_CFG_CHECK_CRC 0
+/* Define this to 1 if you want that the driver checks integrity of incoming
+ * data packets (CRC checks). CRC checks cost quite a bit of code size and are
+ * currently only available for 18 MHz crystal clock. You must choose
+ * USB_CFG_CLOCK_KHZ = 18000 if you enable this option.
+ */
+
+/* ----------------------- Optional Hardware Config ------------------------ */
+
+/* #define USB_CFG_PULLUP_IOPORTNAME D */
+/* If you connect the 1.5k pullup resistor from D- to a port pin instead of
+ * V+, you can connect and disconnect the device from firmware by calling
+ * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h).
+ * This constant defines the port on which the pullup resistor is connected.
+ */
+/* #define USB_CFG_PULLUP_BIT 4 */
+/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
+ * above) where the 1.5k pullup resistor is connected. See description
+ * above for details.
+ */
+
+/* --------------------------- Functional Range ---------------------------- */
+
+#define USB_CFG_HAVE_INTRIN_ENDPOINT 1
+/* Define this to 1 if you want to compile a version with two endpoints: The
+ * default control endpoint 0 and an interrupt-in endpoint (any other endpoint
+ * number).
+ */
+#define USB_CFG_HAVE_INTRIN_ENDPOINT3 1
+/* Define this to 1 if you want to compile a version with three endpoints: The
+ * default control endpoint 0, an interrupt-in endpoint 3 (or the number
+ * configured below) and a catch-all default interrupt-in endpoint as above.
+ * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature.
+ */
+#define USB_CFG_EP3_NUMBER 3
+/* If the so-called endpoint 3 is used, it can now be configured to any other
+ * endpoint number (except 0) with this macro. Default if undefined is 3.
+ */
+/* #define USB_INITIAL_DATATOKEN USBPID_DATA1 */
+/* The above macro defines the startup condition for data toggling on the
+ * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1.
+ * Since the token is toggled BEFORE sending any data, the first packet is
+ * sent with the oposite value of this configuration!
+ */
+#define USB_CFG_IMPLEMENT_HALT 0
+/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
+ * for endpoint 1 (interrupt endpoint). Although you may not need this feature,
+ * it is required by the standard. We have made it a config option because it
+ * bloats the code considerably.
+ */
+#define USB_CFG_SUPPRESS_INTR_CODE 0
+/* Define this to 1 if you want to declare interrupt-in endpoints, but don't
+ * want to send any data over them. If this macro is defined to 1, functions
+ * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if
+ * you need the interrupt-in endpoints in order to comply to an interface
+ * (e.g. HID), but never want to send any data. This option saves a couple
+ * of bytes in flash memory and the transmit buffers in RAM.
+ */
+#define USB_CFG_INTR_POLL_INTERVAL 1
+/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
+ * interval. The value is in milliseconds and must not be less than 10 ms for
+ * low speed devices.
+ */
+#define USB_CFG_IS_SELF_POWERED 0
+/* Define this to 1 if the device has its own power supply. Set it to 0 if the
+ * device is powered from the USB bus.
+ */
+#define USB_CFG_MAX_BUS_POWER 500
+/* Set this variable to the maximum USB bus power consumption of your device.
+ * The value is in milliamperes. [It will be divided by two since USB
+ * communicates power requirements in units of 2 mA.]
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITE 1
+/* Set this to 1 if you want usbFunctionWrite() to be called for control-out
+ * transfers. Set it to 0 if you don't need it and want to save a couple of
+ * bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_READ 0
+/* Set this to 1 if you need to send control replies which are generated
+ * "on the fly" when usbFunctionRead() is called. If you only want to send
+ * data from a static buffer, set it to 0 and return the data from
+ * usbFunctionSetup(). This saves a couple of bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0
+/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
+ * You must implement the function usbFunctionWriteOut() which receives all
+ * interrupt/bulk data sent to any endpoint other than 0. The endpoint number
+ * can be found in 'usbRxToken'.
+ */
+#define USB_CFG_HAVE_FLOWCONTROL 0
+/* Define this to 1 if you want flowcontrol over USB data. See the definition
+ * of the macros usbDisableAllRequests() and usbEnableAllRequests() in
+ * usbdrv.h.
+ */
+#define USB_CFG_DRIVER_FLASH_PAGE 0
+/* If the device has more than 64 kBytes of flash, define this to the 64 k page
+ * where the driver's constants (descriptors) are located. Or in other words:
+ * Define this to 1 for boot loaders on the ATMega128.
+ */
+#define USB_CFG_LONG_TRANSFERS 0
+/* Define this to 1 if you want to send/receive blocks of more than 254 bytes
+ * in a single control-in or control-out transfer. Note that the capability
+ * for long transfers increases the driver size.
+ */
+/* #define USB_RX_USER_HOOK(data, len) if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */
+/* This macro is a hook if you want to do unconventional things. If it is
+ * defined, it's inserted at the beginning of received message processing.
+ * If you eat the received message and don't want default processing to
+ * proceed, do a return after doing your things. One possible application
+ * (besides debugging) is to flash a status LED on each packet.
+ */
+/* #define USB_RESET_HOOK(resetStarts) if(!resetStarts){hadUsbReset();} */
+/* This macro is a hook if you need to know when an USB RESET occurs. It has
+ * one parameter which distinguishes between the start of RESET state and its
+ * end.
+ */
+/* #define USB_SET_ADDRESS_HOOK() hadAddressAssigned(); */
+/* This macro (if defined) is executed when a USB SET_ADDRESS request was
+ * received.
+ */
+#define USB_COUNT_SOF 1
+/* define this macro to 1 if you need the global variable "usbSofCount" which
+ * counts SOF packets. This feature requires that the hardware interrupt is
+ * connected to D- instead of D+.
+ */
+/* #ifdef __ASSEMBLER__
+ * macro myAssemblerMacro
+ * in YL, TCNT0
+ * sts timer0Snapshot, YL
+ * endm
+ * #endif
+ * #define USB_SOF_HOOK myAssemblerMacro
+ * This macro (if defined) is executed in the assembler module when a
+ * Start Of Frame condition is detected. It is recommended to define it to
+ * the name of an assembler macro which is defined here as well so that more
+ * than one assembler instruction can be used. The macro may use the register
+ * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages
+ * immediately after an SOF pulse may be lost and must be retried by the host.
+ * What can you do with this hook? Since the SOF signal occurs exactly every
+ * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in
+ * designs running on the internal RC oscillator.
+ * Please note that Start Of Frame detection works only if D- is wired to the
+ * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES!
+ */
+#define USB_CFG_CHECK_DATA_TOGGLING 0
+/* define this macro to 1 if you want to filter out duplicate data packets
+ * sent by the host. Duplicates occur only as a consequence of communication
+ * errors, when the host does not receive an ACK. Please note that you need to
+ * implement the filtering yourself in usbFunctionWriteOut() and
+ * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable
+ * for each control- and out-endpoint to check for duplicate packets.
+ */
+#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 0
+/* define this macro to 1 if you want the function usbMeasureFrameLength()
+ * compiled in. This function can be used to calibrate the AVR's RC oscillator.
+ */
+#define USB_USE_FAST_CRC 0
+/* The assembler module has two implementations for the CRC algorithm. One is
+ * faster, the other is smaller. This CRC routine is only used for transmitted
+ * messages where timing is not critical. The faster routine needs 31 cycles
+ * per byte while the smaller one needs 61 to 69 cycles. The faster routine
+ * may be worth the 32 bytes bigger code size if you transmit lots of data and
+ * run the AVR close to its limit.
+ */
+
+/* -------------------------- Device Description --------------------------- */
+
+#define USB_CFG_VENDOR_ID (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF)
+/* USB vendor ID for the device, low byte first. If you have registered your
+ * own Vendor ID, define it here. Otherwise you may use one of obdev's free
+ * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_ID (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF)
+/* This is the ID of the product, low byte first. It is interpreted in the
+ * scope of the vendor ID. If you have registered your own VID with usb.org
+ * or if you have licensed a PID from somebody else, define it here. Otherwise
+ * you may use one of obdev's free shared VID/PID pairs. See the file
+ * USB-IDs-for-free.txt for details!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_VERSION 0x00, 0x02
+/* Version number of the device: Minor number first, then major number.
+ */
+#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r'
+#define USB_CFG_VENDOR_NAME_LEN 13
+/* These two values define the vendor name returned by the USB device. The name
+ * must be given as a list of characters under single quotes. The characters
+ * are interpreted as Unicode (UTF-16) entities.
+ * If you don't want a vendor name string, undefine these macros.
+ * ALWAYS define a vendor name containing your Internet domain name if you use
+ * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
+ * details.
+ */
+#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B'
+#define USB_CFG_DEVICE_NAME_LEN 8
+/* Same as above for the device name. If you don't want a device name, undefine
+ * the macros. See the file USB-IDs-for-free.txt before you assign a name if
+ * you use a shared VID/PID.
+ */
+/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
+/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
+/* Same as above for the serial number. If you don't want a serial number,
+ * undefine the macros.
+ * It may be useful to provide the serial number through other means than at
+ * compile time. See the section about descriptor properties below for how
+ * to fine tune control over USB descriptors such as the string descriptor
+ * for the serial number.
+ */
+#define USB_CFG_DEVICE_CLASS 0
+#define USB_CFG_DEVICE_SUBCLASS 0
+/* See USB specification if you want to conform to an existing device class.
+ * Class 0xff is "vendor specific".
+ */
+#define USB_CFG_INTERFACE_CLASS 3 /* HID */
+#define USB_CFG_INTERFACE_SUBCLASS 1 /* Boot */
+#define USB_CFG_INTERFACE_PROTOCOL 1 /* Keyboard */
+/* See USB specification if you want to conform to an existing device class or
+ * protocol. The following classes must be set at interface level:
+ * HID class is 3, no subclass and protocol required (but may be useful!)
+ * CDC class is 2, use subclass 2 and protocol 1 for ACM
+ */
+#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 0
+/* Define this to the length of the HID report descriptor, if you implement
+ * an HID device. Otherwise don't define it or define it to 0.
+ * If you use this define, you must add a PROGMEM character array named
+ * "usbHidReportDescriptor" to your code which contains the report descriptor.
+ * Don't forget to keep the array and this define in sync!
+ */
+
+/* #define USB_PUBLIC static */
+/* Use the define above if you #include usbdrv.c instead of linking against it.
+ * This technique saves a couple of bytes in flash memory.
+ */
+
+/* ------------------- Fine Control over USB Descriptors ------------------- */
+/* If you don't want to use the driver's default USB descriptors, you can
+ * provide our own. These can be provided as (1) fixed length static data in
+ * flash memory, (2) fixed length static data in RAM or (3) dynamically at
+ * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more
+ * information about this function.
+ * Descriptor handling is configured through the descriptor's properties. If
+ * no properties are defined or if they are 0, the default descriptor is used.
+ * Possible properties are:
+ * + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched
+ * at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is
+ * used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if
+ * you want RAM pointers.
+ * + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found
+ * in static memory is in RAM, not in flash memory.
+ * + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash),
+ * the driver must know the descriptor's length. The descriptor itself is
+ * found at the address of a well known identifier (see below).
+ * List of static descriptor names (must be declared PROGMEM if in flash):
+ * char usbDescriptorDevice[];
+ * char usbDescriptorConfiguration[];
+ * char usbDescriptorHidReport[];
+ * char usbDescriptorString0[];
+ * int usbDescriptorStringVendor[];
+ * int usbDescriptorStringDevice[];
+ * int usbDescriptorStringSerialNumber[];
+ * Other descriptors can't be provided statically, they must be provided
+ * dynamically at runtime.
+ *
+ * Descriptor properties are or-ed or added together, e.g.:
+ * #define USB_CFG_DESCR_PROPS_DEVICE (USB_PROP_IS_RAM | USB_PROP_LENGTH(18))
+ *
+ * The following descriptors are defined:
+ * USB_CFG_DESCR_PROPS_DEVICE
+ * USB_CFG_DESCR_PROPS_CONFIGURATION
+ * USB_CFG_DESCR_PROPS_STRINGS
+ * USB_CFG_DESCR_PROPS_STRING_0
+ * USB_CFG_DESCR_PROPS_STRING_VENDOR
+ * USB_CFG_DESCR_PROPS_STRING_PRODUCT
+ * USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
+ * USB_CFG_DESCR_PROPS_HID
+ * USB_CFG_DESCR_PROPS_HID_REPORT
+ * USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver)
+ *
+ * Note about string descriptors: String descriptors are not just strings, they
+ * are Unicode strings prefixed with a 2 byte header. Example:
+ * int serialNumberDescriptor[] = {
+ * USB_STRING_DESCRIPTOR_HEADER(6),
+ * 'S', 'e', 'r', 'i', 'a', 'l'
+ * };
+ */
+
+#define USB_CFG_DESCR_PROPS_DEVICE 0
+#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
+#define USB_CFG_DESCR_PROPS_STRINGS 0
+#define USB_CFG_DESCR_PROPS_STRING_0 0
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_HID 0
+#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_HID_REPORT 0
+#define USB_CFG_DESCR_PROPS_UNKNOWN 0
+
+#define usbMsgPtr_t unsigned short
+/* If usbMsgPtr_t is not defined, it defaults to 'uchar *'. We define it to
+ * a scalar type here because gcc generates slightly shorter code for scalar
+ * arithmetics than for pointer arithmetics. Remove this define for backward
+ * type compatibility or define it to an 8 bit type if you use data in RAM only
+ * and all RAM is below 256 bytes (tiny memory model in IAR CC).
+ */
+
+/* ----------------------- Optional MCU Description ------------------------ */
+
+/* The following configurations have working defaults in usbdrv.h. You
+ * usually don't need to set them explicitly. Only if you want to run
+ * the driver on a device which is not yet supported or with a compiler
+ * which is not fully supported (such as IAR C) or if you use a differnt
+ * interrupt than INT0, you may have to define some of these.
+ */
+/* #define USB_INTR_CFG MCUCR */
+/* #define USB_INTR_CFG_SET ((1 << ISC00) | (1 << ISC01)) */
+/* #define USB_INTR_CFG_CLR 0 */
+/* #define USB_INTR_ENABLE GIMSK */
+/* #define USB_INTR_ENABLE_BIT INT0 */
+/* #define USB_INTR_PENDING GIFR */
+/* #define USB_INTR_PENDING_BIT INTF0 */
+/* #define USB_INTR_VECTOR INT0_vect */
+
+/* Set INT1 for D- falling edge to count SOF */
+/* #define USB_INTR_CFG EICRA */
+#define USB_INTR_CFG_SET ((1 << ISC11) | (0 << ISC10))
+/* #define USB_INTR_CFG_CLR 0 */
+/* #define USB_INTR_ENABLE EIMSK */
+#define USB_INTR_ENABLE_BIT INT1
+/* #define USB_INTR_PENDING EIFR */
+#define USB_INTR_PENDING_BIT INTF1
+#define USB_INTR_VECTOR INT1_vect
+
+#endif /* __usbconfig_h_included__ */