diff options
Diffstat (limited to 'keyboards')
158 files changed, 560 insertions, 1197 deletions
diff --git a/keyboards/0xcb/1337/config.h b/keyboards/0xcb/1337/config.h index 17ae0d55fb..10f946592f 100644 --- a/keyboards/0xcb/1337/config.h +++ b/keyboards/0xcb/1337/config.h @@ -18,16 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // clang-format off -/* key matrix size */ -#define MATRIX_ROWS 3 -#define MATRIX_COLS 3 - -/* Keyboard Matrix Assignments */ -#define DIRECT_PINS { \ - { D2, D4, F4 }, \ - { D7, B1, B3 }, \ - { E6, B4, B2 } \ -} #define TAP_CODE_DELAY 10 #define ENCODER_RESOLUTION 4 #define ENCODERS_PAD_A { F6 } diff --git a/keyboards/0xcb/1337/info.json b/keyboards/0xcb/1337/info.json index 3da716aa37..ca04777536 100644 --- a/keyboards/0xcb/1337/info.json +++ b/keyboards/0xcb/1337/info.json @@ -10,6 +10,13 @@ }, "processor": "atmega32u4", "bootloader": "qmk-dfu", + "matrix_pins": { + "direct": [ + ["D2", "D4", "F4"], + ["D7", "B1", "B3"], + ["E6", "B4", "B2"] + ] + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/0xcb/tutelpad/config.h b/keyboards/0xcb/tutelpad/config.h index 21f22620ad..d4ba1d439f 100644 --- a/keyboards/0xcb/tutelpad/config.h +++ b/keyboards/0xcb/tutelpad/config.h @@ -16,27 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 2 -#define MATRIX_COLS 4 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -/* Keyboard Matrix Assignments */ -#define DIRECT_PINS { \ - { E6, D7, B1, B3 }, \ - { B5, B4, B2, B6 } \ -} - #define RGB_DI_PIN D3 // LED data pin on controller #define RGBLED_NUM 4 // Number of LEDs connected diff --git a/keyboards/0xcb/tutelpad/info.json b/keyboards/0xcb/tutelpad/info.json index 96e61924b9..25c0ca51c4 100644 --- a/keyboards/0xcb/tutelpad/info.json +++ b/keyboards/0xcb/tutelpad/info.json @@ -10,6 +10,12 @@ }, "processor": "atmega32u4", "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["E6", "D7", "B1", "B3"], + ["B5", "B4", "B2", "B6"] + ] + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/1k/config.h b/keyboards/1k/config.h index f5d74426ef..1e970661c0 100644 --- a/keyboards/1k/config.h +++ b/keyboards/1k/config.h @@ -15,18 +15,6 @@ */ #pragma once - -/* matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 1 - -/* - * Keyboard Matrix Assignments - * - * On this board we have direct connection: no diodes. - */ -#define DIRECT_PINS {{ B0 }} - #define RGBLED_NUM 1 #define RGB_DI_PIN B2 diff --git a/keyboards/1k/info.json b/keyboards/1k/info.json index 0c2de31808..8a27d94862 100644 --- a/keyboards/1k/info.json +++ b/keyboards/1k/info.json @@ -8,6 +8,11 @@ "pid": "0x0001", "device_version": "0.0.1" }, + "matrix_pins": { + "direct": [ + ["B0"] + ] + }, "layouts": { "LAYOUT_ortho_1x1": { "layout": [ diff --git a/keyboards/25keys/cassette42/config.h b/keyboards/25keys/cassette42/config.h index fe43496227..c57f66da5d 100644 --- a/keyboards/25keys/cassette42/config.h +++ b/keyboards/25keys/cassette42/config.h @@ -17,13 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 6 - -#define DIRECT_PINS {{ B4, F6, F5, F4, B5, F7 }} - #define ENCODERS_PAD_A { B6, B3 } #define ENCODERS_PAD_B { B2, B1 } #define ENCODER_RESOLUTION 4 diff --git a/keyboards/25keys/cassette42/info.json b/keyboards/25keys/cassette42/info.json index 5150c28422..546e02ab63 100644 --- a/keyboards/25keys/cassette42/info.json +++ b/keyboards/25keys/cassette42/info.json @@ -10,6 +10,11 @@ }, "processor": "atmega32u4", "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["B4", "F6", "F5", "F4", "B5", "F7"] + ] + }, "layouts": { "LAYOUT": { "layout": [{"x":0.5, "y":0.75}, {"x":2.5, "y":0.75}, {"x":0, "y":1.75}, {"x":1, "y":1.75}, {"x":2, "y":1.75}, {"x":3, "y":1.75}] diff --git a/keyboards/40percentclub/4pack/config.h b/keyboards/40percentclub/4pack/config.h index 3a8a54d4fa..d289f893ec 100644 --- a/keyboards/40percentclub/4pack/config.h +++ b/keyboards/40percentclub/4pack/config.h @@ -17,30 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 4 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -// #define MATRIX_ROW_PINS { B0 } // B0 equivalents the ground pin -// #define MATRIX_COL_PINS { E6, D7, C6, D4 } -#define DIRECT_PINS { \ - { E6, D7, C6, D4 } \ -} - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - #define BACKLIGHT_LED_COUNT 2 #undef BACKLIGHT_PIN #define BACKLIGHT_PINS { F6, F7 } diff --git a/keyboards/40percentclub/4pack/info.json b/keyboards/40percentclub/4pack/info.json index 91c6171dff..1665c7b35b 100644 --- a/keyboards/40percentclub/4pack/info.json +++ b/keyboards/40percentclub/4pack/info.json @@ -10,6 +10,11 @@ }, "processor": "atmega32u4", "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["E6", "D7", "C6", "D4"] + ] + }, "layouts": { "LAYOUT": { "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}] diff --git a/keyboards/40percentclub/nano/config.h b/keyboards/40percentclub/nano/config.h index 7d3c140923..39aa83e067 100644 --- a/keyboards/40percentclub/nano/config.h +++ b/keyboards/40percentclub/nano/config.h @@ -17,29 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 2 -#define MATRIX_COLS 4 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * NO_DIODE = switches are directly connected to AVR pins - * -*/ -// #define MATRIX_ROW_PINS { D0, D5 } -// #define MATRIX_COL_PINS { F1, F0, B0 } -#define DIRECT_PINS { \ - { F4, F5, F6, F7 }, \ - { D1, D0, D4, C6 }, \ -} - /* ws2812 RGB LED */ #define RGB_DI_PIN D3 # define RGBLIGHT_EFFECT_BREATHING diff --git a/keyboards/40percentclub/nano/info.json b/keyboards/40percentclub/nano/info.json index 1821a684ac..430129a6a1 100644 --- a/keyboards/40percentclub/nano/info.json +++ b/keyboards/40percentclub/nano/info.json @@ -10,6 +10,12 @@ }, "processor": "atmega32u4", "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["F4", "F5", "F6", "F7"], + ["D1", "D0", "D4", "C6"] + ] + }, "layouts": { "LAYOUT_ortho_2x4": { "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}] diff --git a/keyboards/40percentclub/nein/config.h b/keyboards/40percentclub/nein/config.h index 0cc521499e..e89243f55e 100644 --- a/keyboards/40percentclub/nein/config.h +++ b/keyboards/40percentclub/nein/config.h @@ -16,18 +16,6 @@ #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 3 -#define MATRIX_COLS 3 - -/* Keyboard Matrix Assignments */ -#define DIRECT_PINS { \ - { F4, F5, F6 }, \ - { F7, B1, B3 }, \ - { B2, B6, B5 } \ -} - // #define RGB_DI_PIN E2 // #ifdef RGB_DI_PIN // #define RGBLED_NUM 16 diff --git a/keyboards/40percentclub/nein/info.json b/keyboards/40percentclub/nein/info.json index 82d03395d8..ba39cb834d 100644 --- a/keyboards/40percentclub/nein/info.json +++ b/keyboards/40percentclub/nein/info.json @@ -10,6 +10,13 @@ }, "processor": "atmega32u4", "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["F4", "F5", "F6"], + ["F7", "B1", "B3"], + ["B2", "B6", "B5"] + ] + }, "layouts": { "LAYOUT_ortho_3x3": { "layout": [ diff --git a/keyboards/40percentclub/sixpack/config.h b/keyboards/40percentclub/sixpack/config.h index 9c384ef2aa..c94721d714 100644 --- a/keyboards/40percentclub/sixpack/config.h +++ b/keyboards/40percentclub/sixpack/config.h @@ -17,29 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 2 -#define MATRIX_COLS 3 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -#define DIRECT_PINS { \ - { D4, C6, D7 }, \ - { E6, B4, B5 } \ -} - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - /* Backlight */ #define BACKLIGHT_BREATHING #define BACKLIGHT_LEVELS 6 diff --git a/keyboards/40percentclub/sixpack/info.json b/keyboards/40percentclub/sixpack/info.json index 78ca5bda58..ea7e6281a9 100644 --- a/keyboards/40percentclub/sixpack/info.json +++ b/keyboards/40percentclub/sixpack/info.json @@ -10,6 +10,12 @@ }, "processor": "atmega32u4", "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["D4", "C6", "D7"], + ["E6", "B4", "B5"] + ] + }, "community_layouts": ["ortho_2x3"], "layouts": { "LAYOUT_ortho_2x3": { diff --git a/keyboards/8pack/config.h b/keyboards/8pack/config.h index ddd88f1303..a9564f1bcf 100644 --- a/keyboards/8pack/config.h +++ b/keyboards/8pack/config.h @@ -1,23 +1,11 @@ #pragma once - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* key matrix size */ -#define MATRIX_ROWS 2 -#define MATRIX_COLS 4 - -/* key matrix pins */ - -#define DIRECT_PINS { { F4, F5, F6, F7 }, { B1, B3, B2, B6 } } - #define BACKLIGHT_LED_COUNT 8 #undef BACKLIGHT_PIN #define BACKLIGHT_PINS { D1, D0, D4, C6, D7, E6, B4, B5 } diff --git a/keyboards/8pack/info.json b/keyboards/8pack/info.json index 4520540642..fa33b2644f 100644 --- a/keyboards/8pack/info.json +++ b/keyboards/8pack/info.json @@ -9,6 +9,12 @@ }, "processor": "atmega32u4", "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["F4", "F5", "F6", "F7"], + ["B1", "B3", "B2", "B6"] + ] + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/a_dux/config.h b/keyboards/a_dux/config.h index d6551e60c4..d636139928 100644 --- a/keyboards/a_dux/config.h +++ b/keyboards/a_dux/config.h @@ -16,36 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 8 -#define MATRIX_COLS 5 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * NO_DIODE = switches are directly connected to AVR pins - * -*/ -#define DIRECT_PINS { \ - { C6, D2, F7, B2, F4 }, \ - { D7, D0, F6, B3, F5 }, \ - { E6, D4, D3, B1, B6 }, \ - { B4, B5, NO_PIN, NO_PIN, NO_PIN } \ -} - -#define DIRECT_PINS_RIGHT { \ - { F4, B2, F7, D2, C6 }, \ - { F5, B3, F6, D0, D7 }, \ - { B6, B1, D3, D4, E6 }, \ - { B5, B4, NO_PIN, NO_PIN, NO_PIN } \ -} - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/a_dux/info.json b/keyboards/a_dux/info.json index d5a8365279..6292d5e707 100644 --- a/keyboards/a_dux/info.json +++ b/keyboards/a_dux/info.json @@ -10,6 +10,26 @@ }, "processor": "atmega32u4", "bootloader": "atmel-dfu", + "matrix_pins": { + "direct": [ + ["C6", "D2", "F7", "B2", "F4"], + ["D7", "D0", "F6", "B3", "F5"], + ["E6", "D4", "D3", "B1", "B6"], + ["B4", "B5", null, null, null] + ] + }, + "split": { + "matrix_pins": { + "right": { + "direct": [ + ["F4", "B2", "F7", "D2", "C6"], + ["F5", "B3", "F6", "D0", "D7"], + ["B6", "B1", "D3", "D4", "E6"], + ["B5", "B4", null, null, null] + ] + } + } + }, "community_layouts": ["split_3x5_2"], "layouts": { "LAYOUT_split_3x5_2": { diff --git a/keyboards/adafruit/macropad/config.h b/keyboards/adafruit/macropad/config.h index d533828dae..7f1170ef37 100644 --- a/keyboards/adafruit/macropad/config.h +++ b/keyboards/adafruit/macropad/config.h @@ -16,22 +16,6 @@ #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 3 - -/* Keyboard Matrix Assignments */ -// clang-format off -#define DIRECT_PINS { \ - { NO_PIN, NO_PIN, GP0 }, \ - { GP1, GP2, GP3 }, \ - { GP4, GP5, GP6 }, \ - { GP7, GP8, GP9 }, \ - { GP10, GP11, GP12 } \ -} -// clang-format on - /* OLED SPI Defines */ #define OLED_DISPLAY_128X64 #define OLED_IC OLED_IC_SH1106 diff --git a/keyboards/adafruit/macropad/info.json b/keyboards/adafruit/macropad/info.json index adb82407ec..588c51b008 100644 --- a/keyboards/adafruit/macropad/info.json +++ b/keyboards/adafruit/macropad/info.json @@ -10,6 +10,15 @@ }, "processor": "RP2040", "bootloader": "rp2040", + "matrix_pins": { + "direct": [ + [null, null, "GP0"], + ["GP1", "GP2", "GP3"], + ["GP4", "GP5", "GP6"], + ["GP7", "GP8", "GP9"], + ["GP10", "GP11", "GP12"] + ] + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/anavi/knob1/config.h b/keyboards/anavi/knob1/config.h index 207b653a42..338f5d8dbe 100644 --- a/keyboards/anavi/knob1/config.h +++ b/keyboards/anavi/knob1/config.h @@ -3,17 +3,6 @@ #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 1 - -/* Keyboard Matrix Assignments */ -// clang-format off -#define DIRECT_PINS { \ - { GP26 } \ -} - #define RGBLIGHT_DEFAULT_MODE 9 /* Double tap reset button to enter bootloader */ diff --git a/keyboards/anavi/knob1/info.json b/keyboards/anavi/knob1/info.json index 0677916600..1bd66e9ef0 100644 --- a/keyboards/anavi/knob1/info.json +++ b/keyboards/anavi/knob1/info.json @@ -44,6 +44,11 @@ } ] }, + "matrix_pins": { + "direct": [ + ["GP26"] + ] + }, "layouts": { "LAYOUT_k1": { "layout": [ diff --git a/keyboards/anavi/macropad8/config.h b/keyboards/anavi/macropad8/config.h index a6c0269102..815636ead6 100644 --- a/keyboards/anavi/macropad8/config.h +++ b/keyboards/anavi/macropad8/config.h @@ -17,27 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 2 -#define MATRIX_COLS 4 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * NO_DIODE = switches are directly connected to AVR pins - * -*/ -#define DIRECT_PINS { \ - { D4, F6, B5, E6 }, \ - { F5, F7, B4, C6 } \ -} - #define BACKLIGHT_PIN D7 #define BACKLIGHT_BREATHING #define BACKLIGHT_LEVELS 3 diff --git a/keyboards/anavi/macropad8/info.json b/keyboards/anavi/macropad8/info.json index 979f436810..51e805059d 100644 --- a/keyboards/anavi/macropad8/info.json +++ b/keyboards/anavi/macropad8/info.json @@ -10,6 +10,12 @@ }, "processor": "atmega32u4", "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["D4", "F6", "B5", "E6"], + ["F5", "F7", "B4", "C6"] + ] + }, "layouts": { "LAYOUT_ortho_2x4": { "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}] diff --git a/keyboards/arrayperipherals/1x4p1/config.h b/keyboards/arrayperipherals/1x4p1/config.h index 719c2c00da..b70680e4f5 100644 --- a/keyboards/arrayperipherals/1x4p1/config.h +++ b/keyboards/arrayperipherals/1x4p1/config.h @@ -17,16 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 5 - - -#define DIRECT_PINS { \ - { C7, B7, D6, F5, F7} \ -} - /* rotary encoder*/ #define ENCODERS_PAD_A {F0} #define ENCODERS_PAD_B {F1} diff --git a/keyboards/arrayperipherals/1x4p1/info.json b/keyboards/arrayperipherals/1x4p1/info.json index b224d3d5a6..0441646af0 100644 --- a/keyboards/arrayperipherals/1x4p1/info.json +++ b/keyboards/arrayperipherals/1x4p1/info.json @@ -10,6 +10,11 @@ }, "processor": "atmega32u4", "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["C7", "B7", "D6", "F5", "F7"] + ] + }, "layouts": { "LAYOUT_ortho_1x5": { "layout": [ diff --git a/keyboards/beekeeb/piantor/config.h b/keyboards/beekeeb/piantor/config.h index 8a3e5eb467..6a50429c20 100644 --- a/keyboards/beekeeb/piantor/config.h +++ b/keyboards/beekeeb/piantor/config.h @@ -11,23 +11,5 @@ #define SERIAL_USART_TX_PIN GP0 #define SERIAL_USART_RX_PIN GP1 -/* key matrix size */ -#define MATRIX_ROWS 8 -#define MATRIX_COLS 6 - -#define DIRECT_PINS { \ - { GP5, GP4, GP11, GP15, GP3, GP2}, \ - { GP22, GP20, GP10, GP14, GP9, GP8}, \ - { GP21, GP19, GP6, GP7, GP13, GP12}, \ - { GP17, GP18, GP16, NO_PIN, NO_PIN, NO_PIN} \ -} - -#define DIRECT_PINS_RIGHT { \ - { GP22, GP21, GP2, GP5, GP8, GP11}, \ - { GP20, GP19, GP3, GP6, GP9, GP12}, \ - { GP18, GP17, GP4, GP7, GP10, GP13}, \ - { GP15, GP14, GP16, NO_PIN, NO_PIN, NO_PIN} \ -} - #define BOOTMAGIC_LITE_ROW 0 #define BOOTMAGIC_LITE_COLUMN 5 diff --git a/keyboards/beekeeb/piantor/info.json b/keyboards/beekeeb/piantor/info.json index 50f4feed66..a914b1882d 100644 --- a/keyboards/beekeeb/piantor/info.json +++ b/keyboards/beekeeb/piantor/info.json @@ -18,8 +18,26 @@ "pid": "0x0001", "vid": "0xBEEB" }, + "matrix_pins": { + "direct": [ + ["GP5", "GP4", "GP11", "GP15", "GP3", "GP2"], + ["GP22", "GP20", "GP10", "GP14", "GP9", "GP8"], + ["GP21", "GP19", "GP6", "GP7", "GP13", "GP12"], + ["GP17", "GP18", "GP16", null, null, null] + ] + }, "split": { - "enabled": true + "enabled": true, + "matrix_pins": { + "right": { + "direct": [ + ["GP22", "GP21", "GP2", "GP5", "GP8", "GP11"], + ["GP20", "GP19", "GP3", "GP6", "GP9", "GP12"], + ["GP18", "GP17", "GP4", "GP7", "GP10", "GP13"], + ["GP15", "GP14", "GP16", null, null, null] + ] + } + } }, "community_layouts": ["split_3x6_3"], "layouts": { diff --git a/keyboards/botanicalkeyboards/fm2u/config.h b/keyboards/botanicalkeyboards/fm2u/config.h deleted file mode 100644 index a329779827..0000000000 --- a/keyboards/botanicalkeyboards/fm2u/config.h +++ /dev/null @@ -1,45 +0,0 @@ -/* -Copyright 2020 mechmerlin - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 1 - -/* Keyboard Matrix Assignments */ -#define DIRECT_PINS { \ - { C4 } \ -} - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - - - diff --git a/keyboards/botanicalkeyboards/fm2u/info.json b/keyboards/botanicalkeyboards/fm2u/info.json index c0ea4c9b8a..09d617152b 100644 --- a/keyboards/botanicalkeyboards/fm2u/info.json +++ b/keyboards/botanicalkeyboards/fm2u/info.json @@ -10,6 +10,11 @@ }, "processor": "atmega32u2", "bootloader": "atmel-dfu", + "matrix_pins": { + "direct": [ + ["C4"] + ] + }, "layouts": { "LAYOUT_1u": { "layout": [ diff --git a/keyboards/bpiphany/sixshooter/config.h b/keyboards/bpiphany/sixshooter/config.h deleted file mode 100644 index b8197d3e03..0000000000 --- a/keyboards/bpiphany/sixshooter/config.h +++ /dev/null @@ -1,28 +0,0 @@ -#pragma once - - -/* key matrix size */ -#define MATRIX_ROWS 2 -#define MATRIX_COLS 3 - -/* Keyboard Matrix Assignments */ -#define DIRECT_PINS { \ - { F7, F6, F1 }, \ - { F5, F4, F0 } \ -} - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT diff --git a/keyboards/bpiphany/sixshooter/info.json b/keyboards/bpiphany/sixshooter/info.json index 94059d0c2b..9f3637be0b 100644 --- a/keyboards/bpiphany/sixshooter/info.json +++ b/keyboards/bpiphany/sixshooter/info.json @@ -10,6 +10,12 @@ }, "processor": "atmega32u4", "bootloader": "halfkay", + "matrix_pins": { + "direct": [ + ["F7", "F6", "F1"], + ["F5", "F4", "F0"] + ] + }, "layouts": { "LAYOUT": { "layout": [{"label":"K00", "x":0, "y":0}, {"label":"K01", "x":1, "y":0}, {"label":"K02", "x":2, "y":0}, {"label":"K03", "x":0, "y":1}, {"label":"K04", "x":1, "y":1}, {"label":"K05", "x":2, "y":1}] diff --git a/keyboards/cantor/config.h b/keyboards/cantor/config.h index f002d87b1f..1cb680ac41 100644 --- a/keyboards/cantor/config.h +++ b/keyboards/cantor/config.h @@ -3,20 +3,6 @@ #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 8 -#define MATRIX_COLS 6 - -#define DIRECT_PINS {{B1, B10, A8, B15, B14, B13}, \ - {B9, B8, B5, B4, B3, A15}, \ - {A3, A4, A5, A6, A7, B0}, \ - {A2, A1, A0, NO_PIN, NO_PIN, NO_PIN}} -#define DIRECT_PINS_RIGHT {{B13, B14, B15, A8, B10, B1}, \ - {A15, B3, B4, B5, B8, B9}, \ - {B0, A7, A6, A5, A4, A3}, \ - {A0, A1, A2, NO_PIN, NO_PIN, NO_PIN}} - #define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode. #define SERIAL_USART_TX_PIN B6 // USART TX pin #define SERIAL_USART_RX_PIN B7 // USART RX pin diff --git a/keyboards/cantor/info.json b/keyboards/cantor/info.json index 6d599f4300..b2067508a0 100644 --- a/keyboards/cantor/info.json +++ b/keyboards/cantor/info.json @@ -19,6 +19,26 @@ "pid": "0x0000", "vid": "0xFEED" }, + "matrix_pins": { + "direct": [ + ["B1", "B10", "A8", "B15", "B14", "B13"], + ["B9", "B8", "B5", "B4", "B3", "A15"], + ["A3", "A4", "A5", "A6", "A7", "B0"], + ["A2", "A1", "A0", null, null, null] + ] + }, + "split": { + "matrix_pins": { + "right": { + "direct": [ + ["B13", "B14", "B15", "A8", "B10", "B1"], + ["A15", "B3", "B4", "B5", "B8", "B9"], + ["B0", "A7", "A6", "A5", "A4", "A3"], + ["A0", "A1", "A2", null, null, null] + ] + } + } + }, "community_layouts": ["split_3x6_3"], "layouts": { "LAYOUT_split_3x6_3": { diff --git a/keyboards/crypt_macro/config.h b/keyboards/crypt_macro/config.h index 97ea6e4619..665340e7af 100644 --- a/keyboards/crypt_macro/config.h +++ b/keyboards/crypt_macro/config.h @@ -17,15 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -#define MATRIX_ROWS 2 -#define MATRIX_COLS 3 - -#define DIRECT_PINS { \ - { B12, B6, B7 }, \ - { NO_PIN, B5, NO_PIN} \ -} - /* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */ #define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE diff --git a/keyboards/crypt_macro/info.json b/keyboards/crypt_macro/info.json index 6945fe7391..910777b90c 100644 --- a/keyboards/crypt_macro/info.json +++ b/keyboards/crypt_macro/info.json @@ -10,6 +10,12 @@ }, "processor": "STM32F072", "bootloader": "stm32-dfu", + "matrix_pins": { + "direct": [ + ["B12", "B6", "B7"], + [null, "B5", null] + ] + }, "layouts": { "LAYOUT": { "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":0.5, "y":1, "w":2}] diff --git a/keyboards/dailycraft/owl8/config.h b/keyboards/dailycraft/owl8/config.h index df93c2baaf..259efacb10 100644 --- a/keyboards/dailycraft/owl8/config.h +++ b/keyboards/dailycraft/owl8/config.h @@ -17,28 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 16 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -#define DIRECT_PINS { \ - { F4, F7, B3, B6, F5, F6, B1, B2, D4, C6, D7, E6, NO_PIN, NO_PIN, NO_PIN, NO_PIN } \ -} - -/* COL2ROW, ROW2COL */ -#define DIODE_DIRECTION COL2ROW - //#define LED_NUM_LOCK_PIN B0 //#define LED_CAPS_LOCK_PIN B1 //#define LED_SCROLL_LOCK_PIN B2 diff --git a/keyboards/dailycraft/owl8/info.json b/keyboards/dailycraft/owl8/info.json index de88c712a7..02d503424d 100644 --- a/keyboards/dailycraft/owl8/info.json +++ b/keyboards/dailycraft/owl8/info.json @@ -10,6 +10,11 @@ }, "processor": "atmega32u4", "bootloader": "atmel-dfu", + "matrix_pins": { + "direct": [ + ["F4", "F7", "B3", "B6", "F5", "F6", "B1", "B2", "D4", "C6", "D7", "E6", null, null, null, null] + ] + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/dailycraft/stickey4/config.h b/keyboards/dailycraft/stickey4/config.h index 54ee0d965b..259efacb10 100644 --- a/keyboards/dailycraft/stickey4/config.h +++ b/keyboards/dailycraft/stickey4/config.h @@ -17,28 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 8 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -#define DIRECT_PINS { \ - { D4, C6, D7, E6, NO_PIN, NO_PIN, NO_PIN, NO_PIN } \ -} - -/* COL2ROW, ROW2COL */ -#define DIODE_DIRECTION COL2ROW - //#define LED_NUM_LOCK_PIN B0 //#define LED_CAPS_LOCK_PIN B1 //#define LED_SCROLL_LOCK_PIN B2 diff --git a/keyboards/dailycraft/stickey4/info.json b/keyboards/dailycraft/stickey4/info.json index bbe43f8b13..95d3539456 100644 --- a/keyboards/dailycraft/stickey4/info.json +++ b/keyboards/dailycraft/stickey4/info.json @@ -10,6 +10,11 @@ }, "processor": "atmega32u4", "bootloader": "atmel-dfu", + "matrix_pins": { + "direct": [ + ["D4", "C6", "D7", "E6", null, null, null, null] + ] + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/dekunukem/duckypad/config.h b/keyboards/dekunukem/duckypad/config.h index 6b6bd14445..cbf99d1f5d 100644 --- a/keyboards/dekunukem/duckypad/config.h +++ b/keyboards/dekunukem/duckypad/config.h @@ -20,12 +20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -#define MATRIX_ROWS 1 -#define MATRIX_COLS 17 - -#define DIRECT_PINS {{ B13, B14, B15, A8, A15, B3, B4, B5, B6, B7, C13, C14, C15, F0, F1, A1, A2 }} - #define RGB_DI_PIN A10 #define RGBLED_NUM 15 #define RGB_MATRIX_LED_COUNT 15 diff --git a/keyboards/dekunukem/duckypad/info.json b/keyboards/dekunukem/duckypad/info.json index fa31c1df22..06c2727080 100644 --- a/keyboards/dekunukem/duckypad/info.json +++ b/keyboards/dekunukem/duckypad/info.json @@ -10,6 +10,11 @@ }, "processor": "STM32F072", "bootloader": "stm32-dfu", + "matrix_pins": { + "direct": [ + ["B13", "B14", "B15", "A8", "A15", "B3", "B4", "B5", "B6", "B7", "C13", "C14", "C15", "F0", "F1", "A1", "A2"] + ] + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/ferris/sweep/config.h b/keyboards/ferris/sweep/config.h index 789211e461..d59c8bb414 100644 --- a/keyboards/ferris/sweep/config.h +++ b/keyboards/ferris/sweep/config.h @@ -19,25 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 8 -#define MATRIX_COLS 5 - -#define DIRECT_PINS { \ - { E6, F7, F6, F5, F4 }, \ - { B1, B3, B2, B6, D3 }, \ - { D1, D0, D4, C6, D7 }, \ - { B4, B5, NO_PIN, NO_PIN, NO_PIN } \ -} - -#define DIRECT_PINS_RIGHT { \ - { F4, F5, F6, F7, E6 }, \ - { D3, B6, B2, B3, B1 }, \ - { D7, C6, D4, D0, D1 }, \ - { B5, B4, NO_PIN, NO_PIN, NO_PIN } \ -} - /* serial.c configuration for split keyboard */ #define SOFT_SERIAL_PIN D2 diff --git a/keyboards/ferris/sweep/info.json b/keyboards/ferris/sweep/info.json index b906014d6f..7174eb52b4 100644 --- a/keyboards/ferris/sweep/info.json +++ b/keyboards/ferris/sweep/info.json @@ -7,5 +7,25 @@ "device_version": "0.0.1" }, "processor": "atmega32u4", - "bootloader": "caterina" + "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["E6", "F7", "F6", "F5", "F4"], + ["B1", "B3", "B2", "B6", "D3"], + ["D1", "D0", "D4", "C6", "D7"], + ["B4", "B5", null, null, null] + ] + }, + "split": { + "matrix_pins": { + "right": { + "direct": [ + ["F4", "F5", "F6", "F7", "E6"], + ["D3", "B6", "B2", "B3", "B1"], + ["D7", "C6", "D4", "D0", "D1"], + ["B5", "B4", null, null, null] + ] + } + } + } } diff --git a/keyboards/geekboards/macropad_v2/config.h b/keyboards/geekboards/macropad_v2/config.h index ec6cc2949e..eb9850804f 100644 --- a/keyboards/geekboards/macropad_v2/config.h +++ b/keyboards/geekboards/macropad_v2/config.h @@ -14,12 +14,6 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -/* key matrix size */ -#define MATRIX_ROWS 2 -#define MATRIX_COLS 4 - -#define DIRECT_PINS {{B13, B15, B3, B5}, {B12, B14, A13, B7}} - #define RGBLED_NUM 42 #define RGB_MATRIX_LED_COUNT 42 #define RGB_DI_PIN A7 diff --git a/keyboards/geekboards/macropad_v2/info.json b/keyboards/geekboards/macropad_v2/info.json index 2a18038e4f..b84877a8dc 100644 --- a/keyboards/geekboards/macropad_v2/info.json +++ b/keyboards/geekboards/macropad_v2/info.json @@ -10,6 +10,12 @@ }, "processor": "STM32F072", "bootloader": "stm32-dfu", + "matrix_pins": { + "direct": [ + ["B13", "B15", "B3", "B5"], + ["B12", "B14", "A13", "B7"] + ] + }, "debounce": 3, "layouts": { "LAYOUT_ortho_2x4": { diff --git a/keyboards/handwired/aball/config.h b/keyboards/handwired/aball/config.h index 32d16d82f9..cbe0c8b33e 100644 --- a/keyboards/handwired/aball/config.h +++ b/keyboards/handwired/aball/config.h @@ -17,12 +17,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 1 - -#define DIRECT_PINS {{NO_PIN}} - #define ADNS9800_CS_PIN F7 #define POINTING_DEVICE_INVERT_X diff --git a/keyboards/handwired/aball/info.json b/keyboards/handwired/aball/info.json index cb34aa7034..84d277c136 100644 --- a/keyboards/handwired/aball/info.json +++ b/keyboards/handwired/aball/info.json @@ -10,6 +10,11 @@ }, "processor": "atmega32u4", "bootloader": "atmel-dfu", + "matrix_pins": { + "direct": [ + [null] + ] + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/bdn9_ble/config.h b/keyboards/handwired/bdn9_ble/config.h index 32d082a00b..2dc8bb5327 100644 --- a/keyboards/handwired/bdn9_ble/config.h +++ b/keyboards/handwired/bdn9_ble/config.h @@ -17,18 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 3 -#define MATRIX_COLS 3 - -/* Keyboard Matrix Assignments */ -#define DIRECT_PINS { \ - { D1, D0, C6 }, \ - { D7, B5, B6 }, \ - { B7, D6, F7 } \ -} - #define BACKLIGHT_PIN F6 #define BACKLIGHT_LEVELS 5 diff --git a/keyboards/handwired/bdn9_ble/info.json b/keyboards/handwired/bdn9_ble/info.json index 3d37d12d75..359939713a 100644 --- a/keyboards/handwired/bdn9_ble/info.json +++ b/keyboards/handwired/bdn9_ble/info.json @@ -10,6 +10,13 @@ }, "processor": "atmega32u4", "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["D1", "D0", "C6"], + ["D7", "B5", "B6"], + ["B7", "D6", "F7"] + ] + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/bento/rev1/config.h b/keyboards/handwired/bento/rev1/config.h index 995a6e4239..497a2deb16 100644 --- a/keyboards/handwired/bento/rev1/config.h +++ b/keyboards/handwired/bento/rev1/config.h @@ -16,17 +16,6 @@ #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 2 -#define MATRIX_COLS 3 - -/* Keyboard Matrix Assignments */ -#define DIRECT_PINS { \ - { D7, B1, D2 }, \ - { E6, B4, B2 } \ -} - #define ENCODERS_PAD_A { D1 } #define ENCODERS_PAD_B { D0 } diff --git a/keyboards/handwired/bento/rev1/info.json b/keyboards/handwired/bento/rev1/info.json index 2f09b8820c..2b3012b399 100644 --- a/keyboards/handwired/bento/rev1/info.json +++ b/keyboards/handwired/bento/rev1/info.json @@ -10,6 +10,12 @@ }, "processor": "atmega32u4", "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["D7", "B1", "D2"], + ["E6", "B4", "B2"] + ] + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/dc/mc/001/config.h b/keyboards/handwired/dc/mc/001/config.h index 9f381ca798..ecc1bc9c52 100644 --- a/keyboards/handwired/dc/mc/001/config.h +++ b/keyboards/handwired/dc/mc/001/config.h @@ -17,19 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -/* - BUTTON_MUTE = _BV(4), - BUTTON_STOP = _BV(0), - BUTTON_TRACK_PREVIOUS = _BV(1), - BUTTON_TRACK_NEXT = _BV(2), - BUTTON_PLAY_PAUSE = _BV(3), -*/ -#define DIRECT_PINS \ - { \ - { B4, B0, B1, B2, B3 } \ - } - /* RE_CHANNEL_A = _BV(6), RE_CHANNEL_B = _BV(5), diff --git a/keyboards/handwired/dc/mc/001/info.json b/keyboards/handwired/dc/mc/001/info.json index 114c0f2f35..2bcd5ffd92 100644 --- a/keyboards/handwired/dc/mc/001/info.json +++ b/keyboards/handwired/dc/mc/001/info.json @@ -10,6 +10,11 @@ }, "processor": "atmega32u4", "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["B4", "B0", "B1", "B2", "B3"] + ] + }, "debounce": 50, "layouts": { "LAYOUT": { diff --git a/keyboards/handwired/lemonpad/config.h b/keyboards/handwired/lemonpad/config.h index 2d978f8931..d1e992c215 100644 --- a/keyboards/handwired/lemonpad/config.h +++ b/keyboards/handwired/lemonpad/config.h @@ -16,27 +16,6 @@ #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 2 -#define MATRIX_COLS 3 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ - -#define DIRECT_PINS { \ - { E6, D7, C6 }, \ - { B4, B5, D4 } \ -} - //#define RGB_DI_PIN E2 //#ifdef RGB_DI_PIN //# define RGBLED_NUM 16 diff --git a/keyboards/handwired/lemonpad/info.json b/keyboards/handwired/lemonpad/info.json index 40e3296fd2..9cbcf4f4f7 100644 --- a/keyboards/handwired/lemonpad/info.json +++ b/keyboards/handwired/lemonpad/info.json @@ -10,6 +10,12 @@ }, "processor": "atmega32u4", "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["E6", "D7", "C6"], + ["B4", "B5", "D4"] + ] + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/stream_cheap/2x3/config.h b/keyboards/handwired/stream_cheap/2x3/config.h index 1ac58c88de..5f36081323 100644 --- a/keyboards/handwired/stream_cheap/2x3/config.h +++ b/keyboards/handwired/stream_cheap/2x3/config.h @@ -1,13 +1,5 @@ #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 2 -#define MATRIX_COLS 3 - -/* define direct pins used */ -#define DIRECT_PINS { { D1,C6,B4}, { D0,D4,D7} } - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/stream_cheap/2x3/info.json b/keyboards/handwired/stream_cheap/2x3/info.json index 8754226f1c..555d9540af 100644 --- a/keyboards/handwired/stream_cheap/2x3/info.json +++ b/keyboards/handwired/stream_cheap/2x3/info.json @@ -10,6 +10,12 @@ }, "processor": "atmega32u4", "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["D1", "C6", "B4"], + ["D0", "D4", "D7"] + ] + }, "community_layouts": ["ortho_2x3"], "layouts": { "LAYOUT_ortho_2x3": { diff --git a/keyboards/handwired/stream_cheap/2x4/config.h b/keyboards/handwired/stream_cheap/2x4/config.h index 65701e8d49..5f36081323 100644 --- a/keyboards/handwired/stream_cheap/2x4/config.h +++ b/keyboards/handwired/stream_cheap/2x4/config.h @@ -1,16 +1,5 @@ #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 2 -#define MATRIX_COLS 4 - -/* define direct pins used */ -#define DIRECT_PINS \ - { \ - {D1, D0, D4, C6}, { D7, E6, B4, B5 } \ - } - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/stream_cheap/2x4/info.json b/keyboards/handwired/stream_cheap/2x4/info.json index ae7e361a4d..d298a30c14 100644 --- a/keyboards/handwired/stream_cheap/2x4/info.json +++ b/keyboards/handwired/stream_cheap/2x4/info.json @@ -10,6 +10,12 @@ }, "processor": "atmega32u4", "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["D1", "D0", "D4", "C6"], + ["D7", "E6", "B4", "B5"] + ] + }, "layouts": { "LAYOUT_ortho_2x4": { "layout": [ diff --git a/keyboards/handwired/stream_cheap/2x5/config.h b/keyboards/handwired/stream_cheap/2x5/config.h index f33fc0f7c2..5f36081323 100644 --- a/keyboards/handwired/stream_cheap/2x5/config.h +++ b/keyboards/handwired/stream_cheap/2x5/config.h @@ -1,13 +1,5 @@ #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 2 -#define MATRIX_COLS 5 - -/* define direct pins used */ -#define DIRECT_PINS { { D1,C6,B4,B5,B2}, { D0,D4,D7,E6,B6} } - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/stream_cheap/2x5/info.json b/keyboards/handwired/stream_cheap/2x5/info.json index b8a4623b64..3a81177f31 100644 --- a/keyboards/handwired/stream_cheap/2x5/info.json +++ b/keyboards/handwired/stream_cheap/2x5/info.json @@ -10,6 +10,12 @@ }, "processor": "atmega32u4", "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["D1", "C6", "B4", "B5", "B2"], + ["D0", "D4", "D7", "E6", "B6"] + ] + }, "layouts": { "LAYOUT_ortho_2x5": { "layout": [ diff --git a/keyboards/ianklug/grooveboard/config.h b/keyboards/ianklug/grooveboard/config.h index 1a480db11e..d2bd499e0d 100644 --- a/keyboards/ianklug/grooveboard/config.h +++ b/keyboards/ianklug/grooveboard/config.h @@ -17,30 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 4 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -//#define MATRIX_ROW_PINS { D0, D5 } -//#define MATRIX_COL_PINS { F1, F0, B0 } -#define DIRECT_PINS { \ - { F7, F6, D1, D2 } \ -} - -/* COL2ROW, ROW2COL */ -//#define DIODE_DIRECTION COL2ROW - //#define LED_NUM_LOCK_PIN B0 //#define LED_CAPS_LOCK_PIN B1 //#define LED_SCROLL_LOCK_PIN B2 diff --git a/keyboards/ianklug/grooveboard/info.json b/keyboards/ianklug/grooveboard/info.json index c4bd7ab01f..a885514071 100644 --- a/keyboards/ianklug/grooveboard/info.json +++ b/keyboards/ianklug/grooveboard/info.json @@ -10,6 +10,11 @@ }, "processor": "atmega32u4", "bootloader": "atmel-dfu", + "matrix_pins": { + "direct": [ + ["F7", "F6", "D1", "D2"] + ] + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/kb_elmo/isolation/config.h b/keyboards/kb_elmo/isolation/config.h index eb3f40ba79..4aeb5eaa00 100644 --- a/keyboards/kb_elmo/isolation/config.h +++ b/keyboards/kb_elmo/isolation/config.h @@ -17,14 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 1 - -/* direct key pin */ -#define DIRECT_PINS {{ B0 }} - /* RGB backlight */ #define RGB_DI_PIN B2 #ifdef RGB_DI_PIN diff --git a/keyboards/kb_elmo/isolation/info.json b/keyboards/kb_elmo/isolation/info.json index ef7fb5a14e..262b12056d 100644 --- a/keyboards/kb_elmo/isolation/info.json +++ b/keyboards/kb_elmo/isolation/info.json @@ -10,6 +10,11 @@ }, "processor": "atmega328p", "bootloader": "usbasploader", + "matrix_pins": { + "direct": [ + ["B0"] + ] + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/keebio/bamfk1/config.h b/keyboards/keebio/bamfk1/config.h index 6836443389..de8b594cec 100644 --- a/keyboards/keebio/bamfk1/config.h +++ b/keyboards/keebio/bamfk1/config.h @@ -3,19 +3,6 @@ #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 2 -#define MATRIX_COLS 4 - -/* - * Keyboard Matrix Assignments - */ - -#define DIRECT_PINS { \ - { E6, B6, D6, NO_PIN }, \ - { NO_PIN, NO_PIN, NO_PIN, NO_PIN } \ -} #define AUDIO_PIN C6 #ifdef AUDIO_ENABLE # define STARTUP_SONG SONG(STARTUP_SOUND) diff --git a/keyboards/keebio/bamfk1/info.json b/keyboards/keebio/bamfk1/info.json index fb16f585bb..9390f7d56f 100644 --- a/keyboards/keebio/bamfk1/info.json +++ b/keyboards/keebio/bamfk1/info.json @@ -10,6 +10,12 @@ }, "processor": "atmega32u4", "bootloader": "atmel-dfu", + "matrix_pins": { + "direct": [ + ["E6", "B6", "D6", null], + [null, null, null, null] + ] + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/keebio/bdn9/rev1/config.h b/keyboards/keebio/bdn9/rev1/config.h index f075302e87..d34d9756f9 100644 --- a/keyboards/keebio/bdn9/rev1/config.h +++ b/keyboards/keebio/bdn9/rev1/config.h @@ -17,18 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 3 -#define MATRIX_COLS 3 - -/* Keyboard Matrix Assignments */ -#define DIRECT_PINS { \ - { D2, D4, F4 }, \ - { D7, B1, B3 }, \ - { E6, B4, B2 } \ -} - #define ENCODERS_PAD_A { D0, F6, B6 } #define ENCODERS_PAD_B { D1, F5, F7 } diff --git a/keyboards/keebio/bdn9/rev1/info.json b/keyboards/keebio/bdn9/rev1/info.json index a308d1c87c..e5dea50260 100644 --- a/keyboards/keebio/bdn9/rev1/info.json +++ b/keyboards/keebio/bdn9/rev1/info.json @@ -5,5 +5,12 @@ "device_version": "1.0.0" }, "processor": "atmega32u4", - "bootloader": "caterina" + "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["D2", "D4", "F4"], + ["D7", "B1", "B3"], + ["E6", "B4", "B2"] + ] + } } diff --git a/keyboards/keebio/bdn9/rev2/config.h b/keyboards/keebio/bdn9/rev2/config.h index 7a7f356a2e..f30de7e197 100644 --- a/keyboards/keebio/bdn9/rev2/config.h +++ b/keyboards/keebio/bdn9/rev2/config.h @@ -17,18 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 3 -#define MATRIX_COLS 3 - -/* Keyboard Matrix Assignments */ -#define DIRECT_PINS { \ - { B12, B5, B6 }, \ - { B14, B4, B7 }, \ - { A3, F1, F0 } \ -} - // Left, Right, Middle #define ENCODERS_PAD_A { A8, B3, A10 } #define ENCODERS_PAD_B { A4, A15, A9 } diff --git a/keyboards/keebio/bdn9/rev2/info.json b/keyboards/keebio/bdn9/rev2/info.json index 04d22a1936..24eebef1a8 100644 --- a/keyboards/keebio/bdn9/rev2/info.json +++ b/keyboards/keebio/bdn9/rev2/info.json @@ -5,5 +5,12 @@ "device_version": "2.0.0" }, "processor": "STM32F072", - "bootloader": "stm32-dfu" + "bootloader": "stm32-dfu", + "matrix_pins": { + "direct": [ + ["B12", "B5", "B6"], + ["B14", "B4", "B7"], + ["A3", "F1", "F0"] + ] + } } diff --git a/keyboards/keebio/choconum/config.h b/keyboards/keebio/choconum/config.h index 9419fea3cf..38e745515a 100644 --- a/keyboards/keebio/choconum/config.h +++ b/keyboards/keebio/choconum/config.h @@ -17,21 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 4 -#define DIRECT_PINS { \ - { B2, B10, B3, B4 }, \ - { B1, B11, A15, B5 }, \ - { B0, A5, B7, F0 }, \ - { A7, A6, B8, B6 }, \ - { A4, A3, B9, F1 } \ -} - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/keebio/choconum/info.json b/keyboards/keebio/choconum/info.json index f92da2ad13..b373df4850 100644 --- a/keyboards/keebio/choconum/info.json +++ b/keyboards/keebio/choconum/info.json @@ -10,6 +10,15 @@ }, "processor": "STM32F072", "bootloader": "stm32-dfu", + "matrix_pins": { + "direct": [ + ["B2", "B10", "B3", "B4"], + ["B1", "B11", "A15", "B5"], + ["B0", "A5", "B7", "F0"], + ["A7", "A6", "B8", "B6"], + ["A4", "A3", "B9", "F1"] + ] + }, "community_layouts": ["ortho_5x4", "numpad_5x4"], "layouts": { "LAYOUT_numpad_5x4": { diff --git a/keyboards/keebio/stick/config.h b/keyboards/keebio/stick/config.h index bc4e214c20..807383befc 100644 --- a/keyboards/keebio/stick/config.h +++ b/keyboards/keebio/stick/config.h @@ -17,16 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 12 - -/* key matrix pins */ -#define DIRECT_PINS { \ - { F4, B6, B5, B4, E6, D7, F6, F7, B1, B3, B2, F5 } \ -} - #define ENCODERS_PAD_A { D1, D4 } #define ENCODERS_PAD_B { D0, C6 } @@ -103,7 +93,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # endif #endif -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - #define TAPPING_TERM 200 diff --git a/keyboards/keebio/stick/info.json b/keyboards/keebio/stick/info.json index c247e3ae99..ff91ee9f24 100644 --- a/keyboards/keebio/stick/info.json +++ b/keyboards/keebio/stick/info.json @@ -10,6 +10,11 @@ }, "processor": "atmega32u4", "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["F4", "B6", "B5", "B4", "E6", "D7", "F6", "F7", "B1", "B3", "B2", "F5"] + ] + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/keebio/tukey/config.h b/keyboards/keebio/tukey/config.h index 79e8b254b3..b62aef8a09 100644 --- a/keyboards/keebio/tukey/config.h +++ b/keyboards/keebio/tukey/config.h @@ -17,17 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 2 - -/* Keyboard Matrix Assignments */ -#define DIRECT_PINS { { D4, F6 } } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - #define RGB_DI_PIN D3 #ifdef RGB_DI_PIN #define RGBLED_NUM 8 diff --git a/keyboards/keebio/tukey/info.json b/keyboards/keebio/tukey/info.json index 27a5159c0e..2be3e55e70 100644 --- a/keyboards/keebio/tukey/info.json +++ b/keyboards/keebio/tukey/info.json @@ -10,6 +10,11 @@ }, "processor": "atmega32u4", "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["D4", "F6"] + ] + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/keyhive/uno/rev1/config.h b/keyboards/keyhive/uno/rev1/config.h index 1d5b265ade..7c5e60fdc8 100644 --- a/keyboards/keyhive/uno/rev1/config.h +++ b/keyboards/keyhive/uno/rev1/config.h @@ -18,15 +18,6 @@ #define RGBLIGHT_EFFECT_RAINBOW_MOOD -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 1 - -/* Uno default pinout */ -#define DIRECT_PINS { \ - { B6 } \ -} - #ifdef RGBLIGHT_ENABLE #define RGB_DI_PIN F6 #define RGBLED_NUM 1 diff --git a/keyboards/keyhive/uno/rev1/info.json b/keyboards/keyhive/uno/rev1/info.json index 6038321e52..2fc258ee42 100644 --- a/keyboards/keyhive/uno/rev1/info.json +++ b/keyboards/keyhive/uno/rev1/info.json @@ -4,5 +4,10 @@ "device_version": "0.0.1" }, "processor": "atmega32u4", - "bootloader": "caterina" + "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["B6"] + ] + } } diff --git a/keyboards/keyhive/uno/rev2/config.h b/keyboards/keyhive/uno/rev2/config.h index 1a03c19ead..b9e3a70286 100644 --- a/keyboards/keyhive/uno/rev2/config.h +++ b/keyboards/keyhive/uno/rev2/config.h @@ -22,15 +22,6 @@ #define ENCODERS_PAD_A { B2 } #define ENCODERS_PAD_B { B3 } -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 1 - -/* Uno default pinout */ -#define DIRECT_PINS { \ - { D0 } \ -} - #ifdef RGBLIGHT_ENABLE #define RGB_DI_PIN D1 #define RGBLED_NUM 1 diff --git a/keyboards/keyhive/uno/rev2/info.json b/keyboards/keyhive/uno/rev2/info.json index 811d052ac3..2ea14e8aeb 100644 --- a/keyboards/keyhive/uno/rev2/info.json +++ b/keyboards/keyhive/uno/rev2/info.json @@ -4,5 +4,10 @@ "device_version": "0.0.2" }, "processor": "atmega32u4", - "bootloader": "caterina" + "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["D0"] + ] + } } diff --git a/keyboards/ktec/staryu/config.h b/keyboards/ktec/staryu/config.h index 3b0cb8f330..1826763cbf 100755 --- a/keyboards/ktec/staryu/config.h +++ b/keyboards/ktec/staryu/config.h @@ -16,17 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 2 -#define MATRIX_COLS 3 - -/* key matrix pins */ -#define DIRECT_PINS { \ - { NO_PIN, D0, D1 }, \ - { D4, D3, D2 }, \ -} - #define RGB_DI_PIN C6 #define RGBLED_NUM 1 // Number of LEDs #define RGBLIGHT_EFFECT_BREATHING diff --git a/keyboards/ktec/staryu/info.json b/keyboards/ktec/staryu/info.json index 392610c98a..e222923a23 100644 --- a/keyboards/ktec/staryu/info.json +++ b/keyboards/ktec/staryu/info.json @@ -10,6 +10,12 @@ }, "processor": "atmega32u2", "bootloader": "lufa-dfu", + "matrix_pins": { + "direct": [ + [null, "D0", "D1"], + ["D4", "D3", "D2"] + ] + }, "layouts": { "LAYOUT": { "layout": [{"x":1, "y":0}, {"x":2, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}] diff --git a/keyboards/leafcutterlabs/bigknob/config.h b/keyboards/leafcutterlabs/bigknob/config.h index 13a33aaabc..8a23910956 100644 --- a/keyboards/leafcutterlabs/bigknob/config.h +++ b/keyboards/leafcutterlabs/bigknob/config.h @@ -17,28 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 5 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * NO_DIODE = switches are directly connected to AVR pins - * -*/ - -// Srating with closest to USB port -#define DIRECT_PINS { \ - { B7, D4, D6, F6, F7} \ -} - /* rotary encoder 1,2,3 closest to usb port is 0*/ #define ENCODERS_PAD_A { D0} #define ENCODERS_PAD_B { D2} diff --git a/keyboards/leafcutterlabs/bigknob/info.json b/keyboards/leafcutterlabs/bigknob/info.json index 5933c6301f..ac8f8077d3 100644 --- a/keyboards/leafcutterlabs/bigknob/info.json +++ b/keyboards/leafcutterlabs/bigknob/info.json @@ -10,6 +10,11 @@ }, "processor": "atmega32u4", "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["B7", "D4", "D6", "F6", "F7"] + ] + }, "layouts": { "LAYOUT_ortho_1x5": { "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}] diff --git a/keyboards/littlealby/mute/config.h b/keyboards/littlealby/mute/config.h index fa6ee15f1c..343830cf87 100644 --- a/keyboards/littlealby/mute/config.h +++ b/keyboards/littlealby/mute/config.h @@ -17,19 +17,6 @@ #define USB_MAX_POWER_CONSUMPTION 100 -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 1 - -/* Default pinout */ -/* See arduino micro pinout: https://content.arduino.cc/assets/Pinout-Micro_latest.png - * for pins e.g. - * PB5 = digital pin 9 / analog pin 9 - */ -#define DIRECT_PINS { \ - {B5} \ -} - #ifdef RGBLIGHT_ENABLE #define RGB_DI_PIN B6 #define RGBLED_NUM 1 diff --git a/keyboards/littlealby/mute/info.json b/keyboards/littlealby/mute/info.json index 02348599e5..ed6761b7a9 100644 --- a/keyboards/littlealby/mute/info.json +++ b/keyboards/littlealby/mute/info.json @@ -10,6 +10,11 @@ }, "processor": "atmega32u4", "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["B5"] + ] + }, "layouts": { "LAYOUT": { "layout": [ {"x": 0, "y": 0 }] diff --git a/keyboards/macro3/config.h b/keyboards/macro3/config.h index 81ff5f5223..714f796f48 100644 --- a/keyboards/macro3/config.h +++ b/keyboards/macro3/config.h @@ -5,15 +5,5 @@ #pragma once -/* key matrix size */ -#define MATRIX_ROWS 2 -#define MATRIX_COLS 4 - -/* key matrix pins */ -#define DIRECT_PINS { \ - { D7, C6, D4, D1 }, \ - { B1, B4, B5, B3 } \ -} - #define ENCODERS_PAD_A { D2, F7 } #define ENCODERS_PAD_B { D3, F6 } diff --git a/keyboards/macro3/info.json b/keyboards/macro3/info.json index 830abdb9e9..d8479b2a00 100644 --- a/keyboards/macro3/info.json +++ b/keyboards/macro3/info.json @@ -10,6 +10,12 @@ }, "processor": "atmega32u4", "bootloader": "atmel-dfu", + "matrix_pins": { + "direct": [ + ["D7", "C6", "D4", "D1"], + ["B1", "B4", "B5", "B3"] + ] + }, "layout_aliases": { "LAYOUT": "LAYOUT_ortho_2x4" }, diff --git a/keyboards/makeymakey/config.h b/keyboards/makeymakey/config.h index 07221e385a..c1b43dc834 100644 --- a/keyboards/makeymakey/config.h +++ b/keyboards/makeymakey/config.h @@ -16,18 +16,6 @@ #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 3 -#define MATRIX_COLS 6 - -/* Keyboard Matrix Assignments */ -#define DIRECT_PINS { \ - { D6, B4, C7, B1, E6, D7 }, \ - { C6, D4, D0, D1, D2, D2 }, \ - { F0, F1, F5, F5, F6, F7 } \ -} - /* LEDs Pins */ #define LED_PINS 5 #define LED_PINS_HW {B5, B6, B7, B3, B2} diff --git a/keyboards/makeymakey/info.json b/keyboards/makeymakey/info.json index f8c83898a4..c3114dd744 100644 --- a/keyboards/makeymakey/info.json +++ b/keyboards/makeymakey/info.json @@ -10,6 +10,13 @@ }, "processor": "atmega32u4", "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["D6", "B4", "C7", "B1", "E6", "D7"], + ["C6", "D4", "D0", "D1", "D2", "D2"], + ["F0", "F1", "F5", "F5", "F6", "F7"] + ] + }, "debounce": 10, "layouts": { "LAYOUT": { diff --git a/keyboards/miniaxe/config.h b/keyboards/miniaxe/config.h index c8afd9e752..daa0bc4d86 100644 --- a/keyboards/miniaxe/config.h +++ b/keyboards/miniaxe/config.h @@ -17,34 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 8 -#define MATRIX_COLS 5 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * NO_DIODE = switches are directly connected to AVR pins - * -*/ -// #define MATRIX_ROW_PINS { D0, D5 } -// #define MATRIX_COL_PINS { F1, F0, B0 } -#define DIRECT_PINS { \ - { F1, E6, B0, B2, B3 }, \ - { F5, F0, B1, B7, D2 }, \ - { F6, F7, C7, D5, D3 }, \ - { B5, C6, B6, NO_PIN, NO_PIN } \ -} - -/* COL2ROW, ROW2COL*/ -////#define DIODE_DIRECTION - /* Uncomment below if use underglow */ #define RGB_DI_PIN F4 #ifdef RGB_DI_PIN diff --git a/keyboards/miniaxe/info.json b/keyboards/miniaxe/info.json index 3c366ed6f2..a36e446912 100644 --- a/keyboards/miniaxe/info.json +++ b/keyboards/miniaxe/info.json @@ -10,6 +10,14 @@ }, "processor": "atmega32u4", "bootloader": "atmel-dfu", + "matrix_pins": { + "direct": [ + ["F1", "E6", "B0", "B2", "B3"], + ["F5", "F0", "B1", "B7", "D2"], + ["F6", "F7", "C7", "D5", "D3"], + ["B5", "C6", "B6", null, null] + ] + }, "community_layouts": ["split_3x5_3"], "layouts": { "LAYOUT_split_3x5_3": { diff --git a/keyboards/minimacro5/config.h b/keyboards/minimacro5/config.h index fd1028cb1c..351fb8a5a5 100644 --- a/keyboards/minimacro5/config.h +++ b/keyboards/minimacro5/config.h @@ -17,27 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 5 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * NO_DIODE = switches are directly connected to AVR pins - * -*/ -// #define MATRIX_ROW_PINS { D0, D5 } -// #define MATRIX_COL_PINS { F1, F0, B0 } -#define DIRECT_PINS { \ - { F4, B6, B2, D7, B4 } \ -} //speed for double tap #define TAPPING_TERM 200 diff --git a/keyboards/minimacro5/info.json b/keyboards/minimacro5/info.json index ad17e89c69..1ecd8f7b8c 100644 --- a/keyboards/minimacro5/info.json +++ b/keyboards/minimacro5/info.json @@ -10,6 +10,11 @@ }, "processor": "atmega32u4", "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["F4", "B6", "B2", "D7", "B4"] + ] + }, "layouts": { "LAYOUT_ortho_1x5": { "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":5, "y":0}] diff --git a/keyboards/mixi/config.h b/keyboards/mixi/config.h index 63cc5f9da6..e6b2ef0961 100644 --- a/keyboards/mixi/config.h +++ b/keyboards/mixi/config.h @@ -1,17 +1,5 @@ #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 3 -#define MATRIX_COLS 3 - -/* Keyboard Matrix Assignments */ -#define DIRECT_PINS { \ - { D1, D4, F4 }, \ - { D0, B4, F5 }, \ - { C6, F7, B6 } \ -} - #define ENCODERS_PAD_A { D7, B1 } #define ENCODERS_PAD_B { E6, B3 } diff --git a/keyboards/mixi/info.json b/keyboards/mixi/info.json index 17503123e3..cfc774bc2b 100644 --- a/keyboards/mixi/info.json +++ b/keyboards/mixi/info.json @@ -10,6 +10,13 @@ }, "processor": "atmega32u4", "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["D1", "D4", "F4"], + ["D0", "B4", "F5"], + ["C6", "F7", "B6"] + ] + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/novelkeys/nk1/config.h b/keyboards/novelkeys/nk1/config.h index 88b9c7abb8..c168aca492 100644 --- a/keyboards/novelkeys/nk1/config.h +++ b/keyboards/novelkeys/nk1/config.h @@ -17,16 +17,6 @@ #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 1 - -/* Keyboard Matrix Assignments */ -#define DIRECT_PINS { \ - { D4 } \ -} - #define RGB_DI_PIN F0 #ifdef RGB_DI_PIN #define RGBLED_NUM 9 diff --git a/keyboards/novelkeys/nk1/info.json b/keyboards/novelkeys/nk1/info.json index 137608c978..c9fa789b70 100755 --- a/keyboards/novelkeys/nk1/info.json +++ b/keyboards/novelkeys/nk1/info.json @@ -10,6 +10,11 @@ }, "processor": "atmega32u4", "bootloader": "atmel-dfu", + "matrix_pins": { + "direct": [ + ["D4"] + ] + }, "community_layouts": ["ortho_1x1"], "layouts": { "LAYOUT_ortho_1x1": { diff --git a/keyboards/nullbitsco/scramble/v1/config.h b/keyboards/nullbitsco/scramble/v1/config.h index 6f512db4c5..6a7742ce87 100644 --- a/keyboards/nullbitsco/scramble/v1/config.h +++ b/keyboards/nullbitsco/scramble/v1/config.h @@ -19,13 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 2 -#define MATRIX_COLS 3 - -#define DIRECT_PINS {{D4,D5,B1}, {C3,C2,C1}} - /* Optional encoder pins */ #define ENCODERS_PAD_A { D6 } #define ENCODERS_PAD_B { D7 } diff --git a/keyboards/nullbitsco/scramble/v1/info.json b/keyboards/nullbitsco/scramble/v1/info.json index 11307eba89..0acb699373 100644 --- a/keyboards/nullbitsco/scramble/v1/info.json +++ b/keyboards/nullbitsco/scramble/v1/info.json @@ -1,4 +1,10 @@ { "processor": "atmega328p", - "bootloader": "usbasploader" + "bootloader": "usbasploader", + "matrix_pins": { + "direct": [ + ["D4", "D5", "B1"], + ["C3", "C2", "C1"] + ] + } } diff --git a/keyboards/nullbitsco/scramble/v2/config.h b/keyboards/nullbitsco/scramble/v2/config.h index b4d7820aad..dd2ae62749 100644 --- a/keyboards/nullbitsco/scramble/v2/config.h +++ b/keyboards/nullbitsco/scramble/v2/config.h @@ -19,12 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -/* key matrix size */ -#define MATRIX_ROWS 2 -#define MATRIX_COLS 3 - -#define DIRECT_PINS {{GP6,GP8,GP10}, {GP29,GP28,GP22}} - /* Optional encoder pins */ #define ENCODERS_PAD_A { GP24 } #define ENCODERS_PAD_B { GP25 } diff --git a/keyboards/nullbitsco/scramble/v2/info.json b/keyboards/nullbitsco/scramble/v2/info.json index 87b7fcf7ec..ba27823b36 100644 --- a/keyboards/nullbitsco/scramble/v2/info.json +++ b/keyboards/nullbitsco/scramble/v2/info.json @@ -1,4 +1,10 @@ { "processor": "RP2040", - "bootloader": "rp2040" + "bootloader": "rp2040", + "matrix_pins": { + "direct": [ + ["GP6", "GP8", "GP10"], + ["GP29", "GP28", "GP22"] + ] + } } diff --git a/keyboards/obosob/steal_this_keyboard/config.h b/keyboards/obosob/steal_this_keyboard/config.h index 1b61491402..bf4064bd31 100644 --- a/keyboards/obosob/steal_this_keyboard/config.h +++ b/keyboards/obosob/steal_this_keyboard/config.h @@ -16,36 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 8 -#define MATRIX_COLS 5 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * NO_DIODE = switches are directly connected to AVR pins - * -*/ -#define DIRECT_PINS { \ - { F4, F7, B2, D1, D7 }, \ - { F5, B1, B6, D0, E6 }, \ - { F6, B3, D3, D4, B4 }, \ - { C6, B5, NO_PIN, NO_PIN, NO_PIN } \ -} - -#define DIRECT_PINS_RIGHT { \ - { D7, D1, B2, F7, F4}, \ - { E6, D0, B6, B1, F5 }, \ - { B4, D4, D3, B3, F6 }, \ - { B5, C6, NO_PIN, NO_PIN, NO_PIN } \ -} - /* serial.c configuration for split keyboard */ #define SOFT_SERIAL_PIN D2 diff --git a/keyboards/obosob/steal_this_keyboard/info.json b/keyboards/obosob/steal_this_keyboard/info.json index 1cba614217..5a80a0b17c 100644 --- a/keyboards/obosob/steal_this_keyboard/info.json +++ b/keyboards/obosob/steal_this_keyboard/info.json @@ -10,6 +10,26 @@ }, "processor": "atmega32u4", "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["F4", "F7", "B2", "D1", "D7"], + ["F5", "B1", "B6", "D0", "E6"], + ["F6", "B3", "D3", "D4", "B4"], + ["C6", "B5", null, null, null] + ] + }, + "split": { + "matrix_pins": { + "right": { + "direct": [ + ["D7", "D1", "B2", "F7", "F4"], + ["E6", "D0", "B6", "B1", "F5"], + ["B4", "D4", "D3", "B3", "F6"], + ["B5", "C6", null, null, null] + ] + } + } + }, "community_layouts": [ "split_3x5_2" ], diff --git a/keyboards/peranekofactory/tone/rev1/config.h b/keyboards/peranekofactory/tone/rev1/config.h index b7d4b46921..edf74052c5 100644 --- a/keyboards/peranekofactory/tone/rev1/config.h +++ b/keyboards/peranekofactory/tone/rev1/config.h @@ -17,29 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 8 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ - -#define DIRECT_PINS { \ - { D4, C6, D7, E6, F6, F7, B1, B3 } \ -} - -/* COL2ROW, ROW2COL */ -#define DIODE_DIRECTION COL2ROW - /* Rotary encoder define*/ #define ENCODERS_PAD_A { B5 } #define ENCODERS_PAD_B { B4 } diff --git a/keyboards/peranekofactory/tone/rev1/info.json b/keyboards/peranekofactory/tone/rev1/info.json index a5ad8532b1..16f1db0328 100644 --- a/keyboards/peranekofactory/tone/rev1/info.json +++ b/keyboards/peranekofactory/tone/rev1/info.json @@ -10,6 +10,11 @@ }, "processor": "atmega32u4", "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["D4", "C6", "D7", "E6", "F6", "F7", "B1", "B3"] + ] + }, "layouts": { "LAYOUT": { "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}] diff --git a/keyboards/peranekofactory/tone/rev2/config.h b/keyboards/peranekofactory/tone/rev2/config.h index 93a5eb8145..4068b9ed0e 100644 --- a/keyboards/peranekofactory/tone/rev2/config.h +++ b/keyboards/peranekofactory/tone/rev2/config.h @@ -17,29 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 8 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ - -#define DIRECT_PINS { \ - { D4, C6, D7, E6, F6, F7, B1, B3 } \ -} - -/* COL2ROW, ROW2COL */ -#define DIODE_DIRECTION COL2ROW - /* Rotary encoder define*/ #define ENCODERS_PAD_A { B5 } #define ENCODERS_PAD_B { B4 } diff --git a/keyboards/peranekofactory/tone/rev2/info.json b/keyboards/peranekofactory/tone/rev2/info.json index a5ad8532b1..16f1db0328 100644 --- a/keyboards/peranekofactory/tone/rev2/info.json +++ b/keyboards/peranekofactory/tone/rev2/info.json @@ -10,6 +10,11 @@ }, "processor": "atmega32u4", "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["D4", "C6", "D7", "E6", "F6", "F7", "B1", "B3"] + ] + }, "layouts": { "LAYOUT": { "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}] diff --git a/keyboards/ploopyco/mouse/config.h b/keyboards/ploopyco/mouse/config.h index e59a05ce30..2becbba727 100644 --- a/keyboards/ploopyco/mouse/config.h +++ b/keyboards/ploopyco/mouse/config.h @@ -18,26 +18,6 @@ #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 8 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -#define DIRECT_PINS \ - { \ - { D4, D2, E6, B6, D7, C6, C7, B7 } \ - } - // These pins are not broken out, and cannot be used normally. // They are set as output and pulled high, by default #define UNUSABLE_PINS \ diff --git a/keyboards/ploopyco/mouse/info.json b/keyboards/ploopyco/mouse/info.json index 3550c1d5a3..f9a3e32f41 100644 --- a/keyboards/ploopyco/mouse/info.json +++ b/keyboards/ploopyco/mouse/info.json @@ -10,6 +10,11 @@ }, "processor": "atmega32u4", "bootloader": "atmel-dfu", + "matrix_pins": { + "direct": [ + ["D4", "D2", "E6", "B6", "D7", "C6", "C7", "B7"] + ] + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/ploopyco/trackball/rev1/config.h b/keyboards/ploopyco/trackball/rev1/config.h index 3db085baf2..35ab215341 100644 --- a/keyboards/ploopyco/trackball/rev1/config.h +++ b/keyboards/ploopyco/trackball/rev1/config.h @@ -18,21 +18,6 @@ #pragma once -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -#define DIRECT_PINS \ - { \ - { D4, D2, E6, B5, D7 } \ - } - // These pins are not broken out, and cannot be used normally. // They are set as output and pulled high, by default #define UNUSABLE_PINS \ diff --git a/keyboards/ploopyco/trackball/rev1/info.json b/keyboards/ploopyco/trackball/rev1/info.json index 4369a04103..8e372e7c2b 100644 --- a/keyboards/ploopyco/trackball/rev1/info.json +++ b/keyboards/ploopyco/trackball/rev1/info.json @@ -1,4 +1,9 @@ { "processor": "atmega32u4", - "bootloader": "caterina" + "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["D4", "D2", "E6", "B5", "D7"] + ] + } } diff --git a/keyboards/ploopyco/trackball/rev1_005/config.h b/keyboards/ploopyco/trackball/rev1_005/config.h index 321e3004d1..fcf51c4c1b 100644 --- a/keyboards/ploopyco/trackball/rev1_005/config.h +++ b/keyboards/ploopyco/trackball/rev1_005/config.h @@ -18,21 +18,6 @@ #pragma once -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -#define DIRECT_PINS \ - { \ - { D4, D2, E6, B6, D7 } \ - } - // These pins are not broken out, and cannot be used normally. // They are set as output and pulled high, by default #define UNUSABLE_PINS \ diff --git a/keyboards/ploopyco/trackball/rev1_005/info.json b/keyboards/ploopyco/trackball/rev1_005/info.json index 042c41f34d..b963f8842a 100644 --- a/keyboards/ploopyco/trackball/rev1_005/info.json +++ b/keyboards/ploopyco/trackball/rev1_005/info.json @@ -1,4 +1,9 @@ { "processor": "atmega32u4", - "bootloader": "atmel-dfu" + "bootloader": "atmel-dfu", + "matrix_pins": { + "direct": [ + ["D4", "D2", "E6", "B6", "D7"] + ] + } } diff --git a/keyboards/ploopyco/trackball_mini/rev1_001/config.h b/keyboards/ploopyco/trackball_mini/rev1_001/config.h index d4c9d23bec..485f8e3485 100644 --- a/keyboards/ploopyco/trackball_mini/rev1_001/config.h +++ b/keyboards/ploopyco/trackball_mini/rev1_001/config.h @@ -19,21 +19,6 @@ #pragma once -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -#define DIRECT_PINS \ - { \ - { D4, D2, E6, B6, D7 } \ - } - // These pins are not broken out, and cannot be used normally. // They are set as output and pulled high, by default #define UNUSABLE_PINS \ diff --git a/keyboards/ploopyco/trackball_mini/rev1_001/info.json b/keyboards/ploopyco/trackball_mini/rev1_001/info.json new file mode 100644 index 0000000000..20c192f869 --- /dev/null +++ b/keyboards/ploopyco/trackball_mini/rev1_001/info.json @@ -0,0 +1,7 @@ +{ + "matrix_pins": { + "direct": [ + ["D4", "D2", "E6", "B6", "D7"] + ] + } +} diff --git a/keyboards/ploopyco/trackball_mini/rev1_002/config.h b/keyboards/ploopyco/trackball_mini/rev1_002/config.h index d4c9d23bec..485f8e3485 100644 --- a/keyboards/ploopyco/trackball_mini/rev1_002/config.h +++ b/keyboards/ploopyco/trackball_mini/rev1_002/config.h @@ -19,21 +19,6 @@ #pragma once -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -#define DIRECT_PINS \ - { \ - { D4, D2, E6, B6, D7 } \ - } - // These pins are not broken out, and cannot be used normally. // They are set as output and pulled high, by default #define UNUSABLE_PINS \ diff --git a/keyboards/ploopyco/trackball_mini/rev1_002/info.json b/keyboards/ploopyco/trackball_mini/rev1_002/info.json new file mode 100644 index 0000000000..20c192f869 --- /dev/null +++ b/keyboards/ploopyco/trackball_mini/rev1_002/info.json @@ -0,0 +1,7 @@ +{ + "matrix_pins": { + "direct": [ + ["D4", "D2", "E6", "B6", "D7"] + ] + } +} diff --git a/keyboards/ploopyco/trackball_nano/rev1_001/config.h b/keyboards/ploopyco/trackball_nano/rev1_001/config.h index 3bde88487a..14fcb8ca95 100644 --- a/keyboards/ploopyco/trackball_nano/rev1_001/config.h +++ b/keyboards/ploopyco/trackball_nano/rev1_001/config.h @@ -19,18 +19,6 @@ #pragma once -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -#define DIRECT_PINS {{NO_PIN}} - // These pins are not broken out, and cannot be used normally. // They are set as output and pulled high, by default #define UNUSABLE_PINS \ diff --git a/keyboards/ploopyco/trackball_nano/rev1_001/info.json b/keyboards/ploopyco/trackball_nano/rev1_001/info.json new file mode 100644 index 0000000000..abf5f9fe74 --- /dev/null +++ b/keyboards/ploopyco/trackball_nano/rev1_001/info.json @@ -0,0 +1,7 @@ +{ + "matrix_pins": { + "direct": [ + [null] + ] + } +} diff --git a/keyboards/ryanbaekr/rb1/config.h b/keyboards/ryanbaekr/rb1/config.h index d6e311bb03..9024fa25d5 100644 --- a/keyboards/ryanbaekr/rb1/config.h +++ b/keyboards/ryanbaekr/rb1/config.h @@ -17,16 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * DIRECT: AVR pins used for keys - * - */ -#define DIRECT_PINS {{ B1 }} - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/ryanbaekr/rb1/info.json b/keyboards/ryanbaekr/rb1/info.json index 47ee8c7d2b..f610428f68 100644 --- a/keyboards/ryanbaekr/rb1/info.json +++ b/keyboards/ryanbaekr/rb1/info.json @@ -10,6 +10,11 @@ }, "processor": "atmega32u4", "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["B1"] + ] + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/sendyyeah/pix/config.h b/keyboards/sendyyeah/pix/config.h index 88242cd80c..03b5e62bb5 100644 --- a/keyboards/sendyyeah/pix/config.h +++ b/keyboards/sendyyeah/pix/config.h @@ -16,19 +16,9 @@ #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 5 - #define OLED_FONT_H "keymaps/default/glcdfont.c" #define OLED_TIMEOUT 600000 // Turn of after 10 minutes -/* Keyboard Matrix Assignments */ -#define DIRECT_PINS { \ - { C6, D7, E6, B4, F6 }, \ -} - #define ENCODERS_PAD_A { B1 } #define ENCODERS_PAD_B { B3 } diff --git a/keyboards/sendyyeah/pix/info.json b/keyboards/sendyyeah/pix/info.json index 62e387e16b..d3e5b413a1 100644 --- a/keyboards/sendyyeah/pix/info.json +++ b/keyboards/sendyyeah/pix/info.json @@ -10,6 +10,11 @@ }, "processor": "atmega32u4", "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["C6", "D7", "E6", "B4", "F6"] + ] + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/sergiopoverony/creator_pro/config.h b/keyboards/sergiopoverony/creator_pro/config.h index 0f4ec182a4..08941df1ac 100644 --- a/keyboards/sergiopoverony/creator_pro/config.h +++ b/keyboards/sergiopoverony/creator_pro/config.h @@ -16,16 +16,6 @@ #pragma once -/* key matrix size pins */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 9 -#define DIRECT_PINS { \ - { D1, D4, C6, D7, \ - E6, \ - B2, B3, B1, F7 } \ -} - - /*led layout indication pins*/ #define RED_LED D0 #define BLUE_LED B5 diff --git a/keyboards/sergiopoverony/creator_pro/info.json b/keyboards/sergiopoverony/creator_pro/info.json index a59d0824fb..5b7a061e24 100644 --- a/keyboards/sergiopoverony/creator_pro/info.json +++ b/keyboards/sergiopoverony/creator_pro/info.json @@ -10,6 +10,11 @@ }, "processor": "atmega32u4", "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["D1", "D4", "C6", "D7", "E6", "B2", "B3", "B1", "F7"] + ] + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/spaceman/2_milk/config.h b/keyboards/spaceman/2_milk/config.h index e631c03dff..59ffda45c0 100644 --- a/keyboards/spaceman/2_milk/config.h +++ b/keyboards/spaceman/2_milk/config.h @@ -15,16 +15,6 @@ */ #pragma once -/* key matrix size */ -#define MATRIX_ROWS 2 -#define MATRIX_COLS 1 - -/* Milk default pinout */ -#define DIRECT_PINS { \ - {D4}, \ - {C6} \ -} - #ifdef RGBLIGHT_ENABLE #define RGB_DI_PIN B6 #define RGBLED_NUM 1 diff --git a/keyboards/spaceman/2_milk/info.json b/keyboards/spaceman/2_milk/info.json index c7e4c944c7..c1f31a3ba7 100644 --- a/keyboards/spaceman/2_milk/info.json +++ b/keyboards/spaceman/2_milk/info.json @@ -10,6 +10,12 @@ }, "processor": "atmega32u4", "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["D4"], + ["C6"] + ] + }, "layouts": { "LAYOUT": { "layout": [ {"x": 0, "y": 0 }, {"x": 0, "y": 1 }] diff --git a/keyboards/splitkb/zima/config.h b/keyboards/splitkb/zima/config.h index c4782567ff..777c56465f 100644 --- a/keyboards/splitkb/zima/config.h +++ b/keyboards/splitkb/zima/config.h @@ -17,21 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 3 - -/* - * Keyboard Matrix Assignments - */ -#define DIRECT_PINS { \ - { C6, D6, D5 }, \ - { C7, F7, D4 }, \ - { E6, F5, F6 }, \ - { F0, F1, F4 }, \ -} - #define ENCODERS_PAD_A { B4 } #define ENCODERS_PAD_B { D7 } diff --git a/keyboards/splitkb/zima/info.json b/keyboards/splitkb/zima/info.json index 744efd5b76..a38404cc97 100644 --- a/keyboards/splitkb/zima/info.json +++ b/keyboards/splitkb/zima/info.json @@ -10,6 +10,14 @@ }, "processor": "atmega32u4", "bootloader": "atmel-dfu", + "matrix_pins": { + "direct": [ + ["C6", "D6", "D5"], + ["C7", "F7", "D4"], + ["E6", "F5", "F6"], + ["F0", "F1", "F4"] + ] + }, "layouts": { "LAYOUT_ortho_4x3": { "layout": [ diff --git a/keyboards/tominabox1/bigboy/config.h b/keyboards/tominabox1/bigboy/config.h index e7b0d17fd7..70d1b76bea 100755 --- a/keyboards/tominabox1/bigboy/config.h +++ b/keyboards/tominabox1/bigboy/config.h @@ -16,14 +16,6 @@ #pragma once - -/* key matrix size */ -#define DIRECT_PINS { \ - { D0, B1, B0 }, \ - { B7, B2, B3 } \ -} - - #define ENCODERS_PAD_A { C6 } #define ENCODERS_PAD_B { B6 } #define ENCODER_RESOLUTION 2 diff --git a/keyboards/tominabox1/bigboy/info.json b/keyboards/tominabox1/bigboy/info.json index 79150cd3c2..79cf08b39b 100644 --- a/keyboards/tominabox1/bigboy/info.json +++ b/keyboards/tominabox1/bigboy/info.json @@ -10,6 +10,12 @@ }, "processor": "atmega32u4", "bootloader": "atmel-dfu", + "matrix_pins": { + "direct": [ + ["D0", "B1", "B0"], + ["B7", "B2", "B3"] + ] + }, "layouts": { "LAYOUT": { "layout": [{"label":"0,0", "x":0, "y":0}, {"label":"0,1", "x":1, "y":0}, {"label":"0,2", "x":2, "y":0}, {"label":"1,0", "x":0, "y":1}, {"label":"1,1", "x":1, "y":1}, {"label":"1,2", "x":2, "y":1}] diff --git a/keyboards/ungodly/nines/config.h b/keyboards/ungodly/nines/config.h index 2375d9b63f..85880e4e63 100644 --- a/keyboards/ungodly/nines/config.h +++ b/keyboards/ungodly/nines/config.h @@ -15,18 +15,6 @@ */ #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 3 -#define MATRIX_COLS 3 - -/* Keyboard Matrix Assignments */ -#define DIRECT_PINS { \ - { F4, F5, F6 }, \ - { F7, B1, B3 }, \ - { B2, B6, B5 } \ -} - /* Rotary Encoder Assignments */ #define ENCODERS_PAD_A { C6, E6 } #define ENCODERS_PAD_B { D7, B4 } diff --git a/keyboards/ungodly/nines/info.json b/keyboards/ungodly/nines/info.json index ee71e97cf5..1e7dabe367 100644 --- a/keyboards/ungodly/nines/info.json +++ b/keyboards/ungodly/nines/info.json @@ -10,6 +10,13 @@ }, "processor": "atmega32u4", "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["F4", "F5", "F6"], + ["F7", "B1", "B3"], + ["B2", "B6", "B5"] + ] + }, "layouts": { "LAYOUT_ortho_3x3": { "layout": [ diff --git a/keyboards/winkeys/mini_winni/config.h b/keyboards/winkeys/mini_winni/config.h index 05383c05a5..36fc5c6200 100644 --- a/keyboards/winkeys/mini_winni/config.h +++ b/keyboards/winkeys/mini_winni/config.h @@ -18,14 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 2 -#define MATRIX_COLS 4 - -/* key matrix pins */ -#define DIRECT_PINS { { F4, F5, B4, D7 }, { F6, F7, B6, B5 } } - #define RGB_DI_PIN E6 #define RGBLED_NUM 4 #define RGBLIGHT_EFFECT_BREATHING diff --git a/keyboards/winkeys/mini_winni/info.json b/keyboards/winkeys/mini_winni/info.json index 10c304db46..b3cba1658c 100644 --- a/keyboards/winkeys/mini_winni/info.json +++ b/keyboards/winkeys/mini_winni/info.json @@ -9,6 +9,12 @@ }, "processor": "atmega32u4", "bootloader": "atmel-dfu", + "matrix_pins": { + "direct": [ + ["F4", "F5", "B4", "D7"], + ["F6", "F7", "B6", "B5"] + ] + }, "layouts": { "LAYOUT_all": { "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}] diff --git a/keyboards/winry/winry315/config.h b/keyboards/winry/winry315/config.h index e43016f62b..5d195be432 100644 --- a/keyboards/winry/winry315/config.h +++ b/keyboards/winry/winry315/config.h @@ -3,18 +3,6 @@ #pragma once - -// Key matrix size. -#define MATRIX_ROWS 1 -#define MATRIX_COLS 24 - -// Key pins (including encoder press switches). -// The NO_PIN entries are reserved for encoder rotation mappings. -#define DIRECT_PINS \ - { \ - { F4, C7, D4, D5, D1, F5, C6, D6, D3, D2, F6, B6, D7, B4, B5, B2, D0, E6, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN } \ - } - // clang-format off // Encoder pins. diff --git a/keyboards/winry/winry315/info.json b/keyboards/winry/winry315/info.json index 7740c1a3e8..5abc92a455 100644 --- a/keyboards/winry/winry315/info.json +++ b/keyboards/winry/winry315/info.json @@ -10,6 +10,11 @@ }, "processor": "atmega32u4", "bootloader": "atmel-dfu", + "matrix_pins": { + "direct": [ + ["F4", "C7", "D4", "D5", "D1", "F5", "C6", "D6", "D3", "D2", "F6", "B6", "D7", "B4", "B5", "B2", "D0", "E6", null, null, null, null, null, null] + ] + }, "layout_aliases": { "LAYOUT_all": "LAYOUT_top" }, diff --git a/keyboards/xiudi/xd002/config.h b/keyboards/xiudi/xd002/config.h index fc84c89bf6..19f01664b2 100644 --- a/keyboards/xiudi/xd002/config.h +++ b/keyboards/xiudi/xd002/config.h @@ -15,18 +15,6 @@ */ #pragma once - -/* matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 2 - -/* - * Keyboard Matrix Assignments - * - * On this board we have direct connection: no diodes. - */ -#define DIRECT_PINS {{ B0, B1 }} - #define RGBLED_NUM 2 #define RGB_DI_PIN B2 diff --git a/keyboards/xiudi/xd002/info.json b/keyboards/xiudi/xd002/info.json index f06e823a88..4284b0548b 100644 --- a/keyboards/xiudi/xd002/info.json +++ b/keyboards/xiudi/xd002/info.json @@ -8,6 +8,11 @@ "pid": "0x0202", "device_version": "0.0.1" }, + "matrix_pins": { + "direct": [ + ["B0", "B1"] + ] + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/xiudi/xd004/info.json b/keyboards/xiudi/xd004/info.json index 2dcbc92637..77f57ce322 100644 --- a/keyboards/xiudi/xd004/info.json +++ b/keyboards/xiudi/xd004/info.json @@ -9,6 +9,11 @@ }, "processor": "atmega16u2", "bootloader": "atmel-dfu", + "matrix_pins": { + "direct": [ + ["D3", "D0", "C4", "B4"] + ] + }, "layouts": { "LAYOUT_all": { "layout": [{"label":"L", "x":0, "y":0}, {"label":"O", "x":1, "y":0}, {"label":"V", "x":2, "y":0}, {"label":"E", "x":3, "y":0}] diff --git a/keyboards/xiudi/xd004/v1/config.h b/keyboards/xiudi/xd004/v1/config.h index 9a1e233d32..0b4e44336c 100644 --- a/keyboards/xiudi/xd004/v1/config.h +++ b/keyboards/xiudi/xd004/v1/config.h @@ -23,29 +23,11 @@ where some things are disabled to save space as well. #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 4 - -/* - * Keyboard Matrix Assignments - * - * On this board we have direct connection: no diodes. - */ -#define DIRECT_PINS \ - { \ - { D3, D0, C4, B4 } \ - } - /* Backlight Setup */ // Looks like each backlight LED is connected to a single output, D5 is the one furtherst away from USB port #define BACKLIGHT_PIN D5 #define BACKLIGHT_LEVELS 6 -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - /* RGB Underglow This will not be used, as RGBLIGHT_ENABLE is set to 'no' in rules.mk We do not have enough space in the flash for this at the moment, maybe diff --git a/keyboards/yatara/drink_me/config.h b/keyboards/yatara/drink_me/config.h deleted file mode 100644 index 07deaad16a..0000000000 --- a/keyboards/yatara/drink_me/config.h +++ /dev/null @@ -1,27 +0,0 @@ -/* Copyright 2020 Yatara - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - - -/* Key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 4 - -/* Pinout */ -#define DIRECT_PINS { \ - {B4, B5, B6, B7} \ -} diff --git a/keyboards/yatara/drink_me/info.json b/keyboards/yatara/drink_me/info.json index d1d979a4e3..3df62cf378 100644 --- a/keyboards/yatara/drink_me/info.json +++ b/keyboards/yatara/drink_me/info.json @@ -10,6 +10,11 @@ }, "processor": "atmega32u2", "bootloader": "atmel-dfu", + "matrix_pins": { + "direct": [ + ["B4", "B5", "B6", "B7"] + ] + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/yeehaw/config.h b/keyboards/yeehaw/config.h index b763558f36..b14cd03b1b 100644 --- a/keyboards/yeehaw/config.h +++ b/keyboards/yeehaw/config.h @@ -15,16 +15,6 @@ */ #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 14 - -/* Keyboard Matrix Assignments */ -#define DIRECT_PINS { \ -{ D2, D4, C6, E6, F5, B1, D3, D7, B4, F6, B3, B5, F7, F4 } \ -} - #define ENCODERS_PAD_A { D1 } #define ENCODERS_PAD_B { D0 } diff --git a/keyboards/yeehaw/info.json b/keyboards/yeehaw/info.json index 30a0b1f6cb..98a98cac91 100644 --- a/keyboards/yeehaw/info.json +++ b/keyboards/yeehaw/info.json @@ -10,6 +10,11 @@ }, "processor": "atmega32u4", "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["D2", "D4", "C6", "E6", "F5", "B1", "D3", "D7", "B4", "F6", "B3", "B5", "F7", "F4"] + ] + }, "layouts": { "LAYOUT": { "layout": [{"label":"VOLU", "x":1, "y":0}, {"label":"VOLD", "x":1, "y":1}, {"label":"M1", "x":2, "y":1.5}, {"label":"UP", "x":3, "y":1.5}, {"label":"MNXT", "x":1, "y":2}, {"label":"M2", "x":4, "y":2}, {"label":"LEFT", "x":2, "y":2.5}, {"label":"DOWN", "x":3, "y":2.5}, {"label":"MO(1)", "x":0, "y":2.75}, {"label":"MPRV", "x":1, "y":3}, {"label":"RIGHT", "x":4, "y":3}, {"label":"MPLY", "x":2, "y":3.5}, {"label":"CTL S", "x":3, "y":3.5}, {"label":"RGB TOG", "x":2.5, "y":4.5}] diff --git a/keyboards/yushakobo/quick7/config.h b/keyboards/yushakobo/quick7/config.h index b4040091be..061dfb6dc8 100644 --- a/keyboards/yushakobo/quick7/config.h +++ b/keyboards/yushakobo/quick7/config.h @@ -17,36 +17,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 3 -#define MATRIX_COLS 3 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -#define DIRECT_PINS { \ - { D2, D4, F4 }, \ - { D7, B1, B3 }, \ - { E6, B4, B2 }, \ -} - #define ENCODERS_PAD_A { D1, F5 } #define ENCODERS_PAD_B { D0, F6 } - - - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - #ifdef RGBLIGHT_ENABLE # define RGB_DI_PIN D3 # define RGBLED_NUM 13 diff --git a/keyboards/yushakobo/quick7/info.json b/keyboards/yushakobo/quick7/info.json index d81bd07e1b..6d6d4d6725 100644 --- a/keyboards/yushakobo/quick7/info.json +++ b/keyboards/yushakobo/quick7/info.json @@ -10,6 +10,13 @@ }, "processor": "atmega32u4", "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["D2", "D4", "F4"], + ["D7", "B1", "B3"], + ["E6", "B4", "B2"] + ] + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/yynmt/acperience12/rev1/config.h b/keyboards/yynmt/acperience12/rev1/config.h index fb94abb5da..65a752a97f 100644 --- a/keyboards/yynmt/acperience12/rev1/config.h +++ b/keyboards/yynmt/acperience12/rev1/config.h @@ -16,12 +16,6 @@ #pragma once -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 2 - -#define DIRECT_PINS { { B5, D0 }, { B4, D1 }, { B3, D2 }, { B2, D3 }, { B1, D4 }, { B0, D5 } } - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/yynmt/acperience12/rev1/info.json b/keyboards/yynmt/acperience12/rev1/info.json index 3d8bf426ba..20d4f249c2 100644 --- a/keyboards/yynmt/acperience12/rev1/info.json +++ b/keyboards/yynmt/acperience12/rev1/info.json @@ -10,6 +10,16 @@ }, "processor": "atmega32u2", "bootloader": "atmel-dfu", + "matrix_pins": { + "direct": [ + ["B5", "D0"], + ["B4", "D1"], + ["B3", "D2"], + ["B2", "D3"], + ["B1", "D4"], + ["B0", "D5"] + ] + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/z12/config.h b/keyboards/z12/config.h index 0f808ca88a..6ee032f5c8 100644 --- a/keyboards/z12/config.h +++ b/keyboards/z12/config.h @@ -20,19 +20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define ENCODERS_PAD_A { B5, B6 } #define ENCODERS_PAD_B { B4, B2 } -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 4 - -/*Keyboard Matrix Assignments */ - -#define DIRECT_PINS { \ - { NO_PIN, E6, C6, NO_PIN }, \ - { D2, D7, D4, D3 }, \ - { F7, B1, B3, NO_PIN }, \ - { F6, F5, F4, NO_PIN } \ -} - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/z12/info.json b/keyboards/z12/info.json index 1a7c75b12a..baed03f0fe 100644 --- a/keyboards/z12/info.json +++ b/keyboards/z12/info.json @@ -10,6 +10,14 @@ }, "processor": "atmega32u4", "bootloader": "caterina", + "matrix_pins": { + "direct": [ + [null, "E6", "C6", null], + ["D2", "D7", "D4", "D3"], + ["F7", "B1", "B3", null], + ["F6", "F5", "F4", null] + ] + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/z34/config.h b/keyboards/z34/config.h index b318b75090..2f46a4a04b 100644 --- a/keyboards/z34/config.h +++ b/keyboards/z34/config.h @@ -16,27 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -/* key matrix size */ -#define MATRIX_ROWS 8 -#define MATRIX_COLS 5 - -/*Keyboard Matrix Assignments */ - -#define DIRECT_PINS { \ - { C6, F7, F6, F5, F4 }, \ - { D7, B6, B2, B3, B1 }, \ - { E6, D4, D0, D1, D3 }, \ - { B4, B5, NO_PIN, NO_PIN, NO_PIN } \ -} - -#define DIRECT_PINS_RIGHT { \ - { F4, F5, F6, F7, C6 }, \ - { B1, B3, B2, B6, D7 }, \ - { D3, D1, D0, D4, E6 }, \ - { B5, B4, NO_PIN, NO_PIN, NO_PIN } \ -} - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/z34/info.json b/keyboards/z34/info.json index 00d5e5252f..0f210d4077 100644 --- a/keyboards/z34/info.json +++ b/keyboards/z34/info.json @@ -10,6 +10,26 @@ }, "processor": "atmega32u4", "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["C6", "F7", "F6", "F5", "F4"], + ["D7", "B6", "B2", "B3", "B1"], + ["E6", "D4", "D0", "D1", "D3"], + ["B4", "B5", null, null, null] + ] + }, + "split": { + "matrix_pins": { + "right": { + "direct": [ + ["F4", "F5", "F6", "F7", "C6"], + ["B1", "B3", "B2", "B6", "D7"], + ["D3", "D1", "D0", "D4", "E6"], + ["B5", "B4", null, null, null] + ] + } + } + }, "layouts": { "LAYOUT": { "layout": [ |