4 files changed, 0 insertions, 91 deletions
diff --git a/keyboards/yoichiro/lunakey_macro/config.h b/keyboards/yoichiro/lunakey_macro/config.h
index 070327773d..b3c1a79dce 100644
--- a/keyboards/yoichiro/lunakey_macro/config.h
+++ b/keyboards/yoichiro/lunakey_macro/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 3
@@ -57,10 +56,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 //#define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
 
-//#define BACKLIGHT_PIN B7
-//#define BACKLIGHT_LEVELS 3
-//#define BACKLIGHT_BREATHING
-
 #define RGB_DI_PIN D3
 #ifdef RGB_DI_PIN
   #define RGBLED_NUM 5
@@ -88,43 +83,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-//#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-//#define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -140,7 +98,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/yoichiro/lunakey_mini/config.h b/keyboards/yoichiro/lunakey_mini/config.h
index 9e38924219..1bcc892d65 100644
--- a/keyboards/yoichiro/lunakey_mini/config.h
+++ b/keyboards/yoichiro/lunakey_mini/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 8
@@ -44,10 +43,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #define SOFT_SERIAL_PIN D2  // or D1, D2, D3, E6
 
-//#define BACKLIGHT_PIN B7
-//#define BACKLIGHT_LEVELS 3
-//#define BACKLIGHT_BREATHING
-
 #define RGB_DI_PIN D3
 #ifdef RGB_DI_PIN
   #define RGBLED_NUM 12
@@ -81,43 +76,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Audio Support */
 #define AUDIO_PIN C6
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -133,7 +96,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/yoichiro/lunakey_pico/config.h b/keyboards/yoichiro/lunakey_pico/config.h
index be9b505794..cf819293be 100644
--- a/keyboards/yoichiro/lunakey_pico/config.h
+++ b/keyboards/yoichiro/lunakey_pico/config.h
@@ -18,9 +18,6 @@
 #define RGBLIGHT_LED_MAP { 0, 1, 2, 3, 4, 5, \
                            11, 10, 9, 8, 7, 6 }
 
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
diff --git a/keyboards/yoichiro/lunakey_pico/info.json b/keyboards/yoichiro/lunakey_pico/info.json
index d914f8687f..a10d0ca58e 100644
--- a/keyboards/yoichiro/lunakey_pico/info.json
+++ b/keyboards/yoichiro/lunakey_pico/info.json
@@ -18,7 +18,6 @@
         "cols": ["GP21", "GP20", "GP19", "GP18", "GP17", "GP16"],
         "rows": ["GP12", "GP13", "GP14", "GP15"]
     },
-    "debounce": 5,
     "processor": "RP2040",
     "usb": {
         "device_version": "3.0.0",