summaryrefslogtreecommitdiff
path: root/keyboards/ydkb/just60
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/ydkb/just60')
-rw-r--r--keyboards/ydkb/just60/readme.md2
1 files changed, 1 insertions, 1 deletions
diff --git a/keyboards/ydkb/just60/readme.md b/keyboards/ydkb/just60/readme.md
index 76eee5dced..1fe05bd3ea 100644
--- a/keyboards/ydkb/just60/readme.md
+++ b/keyboards/ydkb/just60/readme.md
@@ -2,7 +2,7 @@
Just60 keyboard produced by Yang. The keyboard comes with a custom Mass Storage Device bootloader and a TMK based firmware from ydkb.io.
-To use a QMK based firmware, you might want to install a QMK bootloader. The PCB exposes 6 pins for ISP(In-System Programming), and they are located just under the ATMega32U4 chip. From left to right, the pins are `VCC`, `SCLK`, `MOSI`, `MISO`, `QK_BOOT`, `GND`. The `GND` is the square one. You could program the flash with any AVR programmer, or a Raspberry Pi with `avrdude`.
+To use a QMK based firmware, you might want to install a QMK bootloader. The PCB exposes 6 pins for ISP(In-System Programming), and they are located just under the ATMega32U4 chip. From left to right, the pins are `VCC`, `SCLK`, `MOSI`, `MISO`, `RESET`, `GND`. The `GND` is the square one. You could program the flash with any AVR programmer, or a Raspberry Pi with `avrdude`.
Backlight LEDs and Bluetooth are not working yet.