summaryrefslogtreecommitdiff
path: root/keyboards/yandrstudio/nz64/config.h
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/yandrstudio/nz64/config.h')
-rw-r--r--keyboards/yandrstudio/nz64/config.h78
1 files changed, 5 insertions, 73 deletions
diff --git a/keyboards/yandrstudio/nz64/config.h b/keyboards/yandrstudio/nz64/config.h
index 4aa37c5f20..81b549b60d 100644
--- a/keyboards/yandrstudio/nz64/config.h
+++ b/keyboards/yandrstudio/nz64/config.h
@@ -15,76 +15,8 @@
*/
#pragma once
-/* RGB Matrix */
-#ifdef RGB_MATRIX_ENABLE
-# define RGB_MATRIX_LED_COUNT 82
-
-# define WS2812_PWM_DRIVER PWMD3 // default: PWMD2
-# define WS2812_PWM_CHANNEL 2 // default: 2
-# define WS2812_PWM_PAL_MODE 2 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
-# define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
-# define WS2812_DMA_CHANNEL 5 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
-
-
-# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 180
-# define RGB_DISABLE_WHEN_USB_SUSPENDED true
-# define RGB_MATRIX_CENTER { 96, 32 }
-# define RGB_MATRIX_KEYPRESSES
-# define RGB_MATRIX_FRAMEBUFFER_EFFECTS
-
-# define ENABLE_RGB_MATRIX_ALPHAS_MODS
-# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
-# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
-# define ENABLE_RGB_MATRIX_BREATHING
-# define ENABLE_RGB_MATRIX_BAND_SAT
-# define ENABLE_RGB_MATRIX_BAND_VAL
-# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
-# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
-# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
-# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
-# define ENABLE_RGB_MATRIX_CYCLE_ALL
-# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
-# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
-# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
-# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
-# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
-# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
-# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
-# define ENABLE_RGB_MATRIX_DUAL_BEACON
-# define ENABLE_RGB_MATRIX_RAINBOW_BEACON
-# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
-# define ENABLE_RGB_MATRIX_RAINDROPS
-# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
-# define ENABLE_RGB_MATRIX_HUE_BREATHING
-# define ENABLE_RGB_MATRIX_HUE_PENDULUM
-# define ENABLE_RGB_MATRIX_HUE_WAVE
-# define ENABLE_RGB_MATRIX_PIXEL_RAIN
-# define ENABLE_RGB_MATRIX_PIXEL_FLOW
-# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL
-/* enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined */
-# define ENABLE_RGB_MATRIX_TYPING_HEATMAP
-# define ENABLE_RGB_MATRIX_DIGITAL_RAIN
-/* enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined */
-# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
-# define ENABLE_RGB_MATRIX_SOLID_REACTIVE
-# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
-# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
-# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
-# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
-# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
-# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
-# define ENABLE_RGB_MATRIX_SPLASH
-# define ENABLE_RGB_MATRIX_MULTISPLASH
-# define ENABLE_RGB_MATRIX_SOLID_SPLASH
-# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
-
-#endif
-
-
-#ifdef RGBLIGHT_ENABLE
-# define WS2812_PWM_DRIVER PWMD3 // default: PWMD2
-# define WS2812_PWM_CHANNEL 2 // default: 2
-# define WS2812_PWM_PAL_MODE 2 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
-# define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
-# define WS2812_DMA_CHANNEL 5 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
-#endif
+#define WS2812_PWM_DRIVER PWMD3 // default: PWMD2
+#define WS2812_PWM_CHANNEL 2 // default: 2
+#define WS2812_PWM_PAL_MODE 2 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
+#define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
+#define WS2812_DMA_CHANNEL 5 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.