5 files changed, 8 insertions, 54 deletions
diff --git a/keyboards/work_louder/work_board/config.h b/keyboards/work_louder/work_board/config.h
index e7d23ed7ee..a44e9d0a74 100644
--- a/keyboards/work_louder/work_board/config.h
+++ b/keyboards/work_louder/work_board/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS  4
@@ -130,43 +129,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_SOLID_COLOR // Sets the default mode, if none has been set
 #define RGB_MATRIX_DEFAULT_HUE 191 // Sets the default hue value, if none has been set
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-// #define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-// #define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -188,8 +150,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define ENCODERS_PAD_B \
     { B1 }
 
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
-
 #define VIA_EEPROM_LAYOUT_OPTIONS_DEFAULT 0x1
diff --git a/keyboards/work_louder/work_board/info.json b/keyboards/work_louder/work_board/info.json
index 570e5c21db..e354390d83 100644
--- a/keyboards/work_louder/work_board/info.json
+++ b/keyboards/work_louder/work_board/info.json
@@ -7,6 +7,8 @@
       "vid": "0x574C",
       "pid": "0xDCD1"
     },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "layouts": {
         "LAYOUT_2u_space": {
             "layout": [
diff --git a/keyboards/work_louder/work_board/keymaps/default/keymap.c b/keyboards/work_louder/work_board/keymaps/default/keymap.c
index 14fb5014c7..56c4a2ce1d 100644
--- a/keyboards/work_louder/work_board/keymaps/default/keymap.c
+++ b/keyboards/work_louder/work_board/keymaps/default/keymap.c
@@ -61,7 +61,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 };
 
 
-void dance_enc_finished(qk_tap_dance_state_t *state, void *user_data) {
+void dance_enc_finished(tap_dance_state_t *state, void *user_data) {
     if (state->count == 1) {
         register_code(KC_MPLY);
     } else if (state->count == 2) {
@@ -71,7 +71,7 @@ void dance_enc_finished(qk_tap_dance_state_t *state, void *user_data) {
     }
 }
 
-void dance_enc_reset(qk_tap_dance_state_t *state, void *user_data) {
+void dance_enc_reset(tap_dance_state_t *state, void *user_data) {
     if (state->count == 1) {
         unregister_code(KC_MPLY);
     } else if (state->count == 2) {
@@ -82,7 +82,7 @@ void dance_enc_reset(qk_tap_dance_state_t *state, void *user_data) {
 }
 
 // Tap Dance definitions
-qk_tap_dance_action_t tap_dance_actions[] = {
+tap_dance_action_t tap_dance_actions[] = {
     [ENC_TAP] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, dance_enc_finished, dance_enc_reset),
 };
 
diff --git a/keyboards/work_louder/work_board/keymaps/via/keymap.c b/keyboards/work_louder/work_board/keymaps/via/keymap.c
index f0929bb9c9..17321a773b 100644
--- a/keyboards/work_louder/work_board/keymaps/via/keymap.c
+++ b/keyboards/work_louder/work_board/keymaps/via/keymap.c
@@ -64,7 +64,7 @@ const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][2] = {
 #endif
 // clang-format on
 
-void dance_enc_finished(qk_tap_dance_state_t *state, void *user_data) {
+void dance_enc_finished(tap_dance_state_t *state, void *user_data) {
     if (state->count == 1) {
         register_code(KC_MPLY);
     } else if (state->count == 2) {
@@ -74,7 +74,7 @@ void dance_enc_finished(qk_tap_dance_state_t *state, void *user_data) {
     }
 }
 
-void dance_enc_reset(qk_tap_dance_state_t *state, void *user_data) {
+void dance_enc_reset(tap_dance_state_t *state, void *user_data) {
     if (state->count == 1) {
         unregister_code(KC_MPLY);
     } else if (state->count == 2) {
@@ -85,7 +85,7 @@ void dance_enc_reset(qk_tap_dance_state_t *state, void *user_data) {
 }
 
 // Tap Dance definitions
-qk_tap_dance_action_t tap_dance_actions[] = {
+tap_dance_action_t tap_dance_actions[] = {
     [ENC_TAP] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, dance_enc_finished, dance_enc_reset),
 };
 
diff --git a/keyboards/work_louder/work_board/rules.mk b/keyboards/work_louder/work_board/rules.mk
index b89d0adf1e..714b4b5d04 100644
--- a/keyboards/work_louder/work_board/rules.mk
+++ b/keyboards/work_louder/work_board/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #