diff options
Diffstat (limited to 'keyboards/wilba_tech')
56 files changed, 7 insertions, 738 deletions
diff --git a/keyboards/wilba_tech/rama_works_kara/config.h b/keyboards/wilba_tech/rama_works_kara/config.h index d713c41bb9..84b096bae0 100644 --- a/keyboards/wilba_tech/rama_works_kara/config.h +++ b/keyboards/wilba_tech/rama_works_kara/config.h @@ -15,7 +15,6 @@ */ #pragma once -#include "config_common.h" // key matrix size #define MATRIX_ROWS 5 @@ -32,9 +31,6 @@ // COL2ROW or ROW2COL #define DIODE_DIRECTION COL2ROW -// Set 0 if debouncing isn't needed -#define DEBOUNCE 5 - // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap #define LOCKING_SUPPORT_ENABLE // Locking resynchronize hack diff --git a/keyboards/wilba_tech/rama_works_kara/info.json b/keyboards/wilba_tech/rama_works_kara/info.json index 2be81f0866..c56d75787f 100644 --- a/keyboards/wilba_tech/rama_works_kara/info.json +++ b/keyboards/wilba_tech/rama_works_kara/info.json @@ -8,6 +8,7 @@ "pid": "0x4B52", "device_version": "0.0.1" }, + "community_layouts": ["60_hhkb"], "layouts": { "LAYOUT_60_hhkb": { "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Delete", "x":13.5, "y":1, "w":1.5}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Os", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Os", "x":12.5, "y":4}] diff --git a/keyboards/wilba_tech/rama_works_kara/rules.mk b/keyboards/wilba_tech/rama_works_kara/rules.mk index a3731bf69c..0185942a3b 100644 --- a/keyboards/wilba_tech/rama_works_kara/rules.mk +++ b/keyboards/wilba_tech/rama_works_kara/rules.mk @@ -24,8 +24,6 @@ AUDIO_ENABLE = no # Audio output CIE1931_CURVE = yes -LAYOUTS = 60_hhkb - # project specific files SRC = keyboards/wilba_tech/wt_main.c \ keyboards/wilba_tech/wt_rgb_backlight.c \ diff --git a/keyboards/wilba_tech/rama_works_koyu/config.h b/keyboards/wilba_tech/rama_works_koyu/config.h index de2d4aafba..0f76f31aa2 100644 --- a/keyboards/wilba_tech/rama_works_koyu/config.h +++ b/keyboards/wilba_tech/rama_works_koyu/config.h @@ -15,7 +15,6 @@ */ #pragma once -#include "config_common.h" // key matrix size #define MATRIX_ROWS 5 @@ -32,9 +31,6 @@ // COL2ROW or ROW2COL #define DIODE_DIRECTION COL2ROW -// Set 0 if debouncing isn't needed -#define DEBOUNCE 5 - // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap #define LOCKING_SUPPORT_ENABLE // Locking resynchronize hack diff --git a/keyboards/wilba_tech/rama_works_m10_b/config.h b/keyboards/wilba_tech/rama_works_m10_b/config.h index d7fe10a965..91ccf8a0a8 100644 --- a/keyboards/wilba_tech/rama_works_m10_b/config.h +++ b/keyboards/wilba_tech/rama_works_m10_b/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 1 @@ -40,48 +39,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DIODE_DIRECTION COL2ROW #define BACKLIGHT_PIN C6 -//#define BACKLIGHT_BREATHING #define BACKLIGHT_LEVELS 3 -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/wilba_tech/rama_works_m10_c/config.h b/keyboards/wilba_tech/rama_works_m10_c/config.h index 9c893ac1b3..bf6feb44ea 100644 --- a/keyboards/wilba_tech/rama_works_m10_c/config.h +++ b/keyboards/wilba_tech/rama_works_m10_c/config.h @@ -15,7 +15,6 @@ */ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 1 @@ -36,9 +35,6 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/wilba_tech/rama_works_m50_a/config.h b/keyboards/wilba_tech/rama_works_m50_a/config.h index 47d47fae18..abae377100 100644 --- a/keyboards/wilba_tech/rama_works_m50_a/config.h +++ b/keyboards/wilba_tech/rama_works_m50_a/config.h @@ -15,7 +15,6 @@ */ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 4 @@ -37,9 +36,6 @@ /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/rama_works_m50_ax/config.h b/keyboards/wilba_tech/rama_works_m50_ax/config.h index 6910e7a7b0..78f647db8d 100644 --- a/keyboards/wilba_tech/rama_works_m50_ax/config.h +++ b/keyboards/wilba_tech/rama_works_m50_ax/config.h @@ -15,7 +15,6 @@ */ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 4 @@ -37,9 +36,6 @@ /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/rama_works_m60_a/config.h b/keyboards/wilba_tech/rama_works_m60_a/config.h index 05f12caaf2..7ecf416e3c 100644 --- a/keyboards/wilba_tech/rama_works_m60_a/config.h +++ b/keyboards/wilba_tech/rama_works_m60_a/config.h @@ -15,7 +15,6 @@ */ #pragma once -#include "config_common.h" // key matrix size #define MATRIX_ROWS 5 @@ -32,9 +31,6 @@ // COL2ROW or ROW2COL #define DIODE_DIRECTION COL2ROW -// Set 0 if debouncing isn't needed -#define DEBOUNCE 5 - // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap #define LOCKING_SUPPORT_ENABLE // Locking resynchronize hack diff --git a/keyboards/wilba_tech/rama_works_m60_a/info.json b/keyboards/wilba_tech/rama_works_m60_a/info.json index f88041bbe6..507ada8700 100644 --- a/keyboards/wilba_tech/rama_works_m60_a/info.json +++ b/keyboards/wilba_tech/rama_works_m60_a/info.json @@ -8,6 +8,7 @@ "pid": "0x060A", "device_version": "0.0.1" }, + "community_layouts": ["60_hhkb"], "layouts": { "LAYOUT_60_hhkb": { "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Delete", "x":13.5, "y":1, "w":1.5}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Os", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Os", "x":12.5, "y":4}] diff --git a/keyboards/wilba_tech/rama_works_m60_a/rules.mk b/keyboards/wilba_tech/rama_works_m60_a/rules.mk index e3fae376fc..35377a290b 100644 --- a/keyboards/wilba_tech/rama_works_m60_a/rules.mk +++ b/keyboards/wilba_tech/rama_works_m60_a/rules.mk @@ -24,8 +24,6 @@ RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. CIE1931_CURVE = yes -LAYOUTS = 60_hhkb - # project specific files SRC = keyboards/wilba_tech/wt_main.c \ keyboards/wilba_tech/wt_rgb_backlight.c \ diff --git a/keyboards/wilba_tech/rama_works_m65_b/config.h b/keyboards/wilba_tech/rama_works_m65_b/config.h index ba99a20f97..ede0a2baeb 100644 --- a/keyboards/wilba_tech/rama_works_m65_b/config.h +++ b/keyboards/wilba_tech/rama_works_m65_b/config.h @@ -15,7 +15,6 @@ */ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -37,9 +36,6 @@ /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/rama_works_m65_bx/config.h b/keyboards/wilba_tech/rama_works_m65_bx/config.h index 7e2a0ce122..37652cb4ea 100644 --- a/keyboards/wilba_tech/rama_works_m65_bx/config.h +++ b/keyboards/wilba_tech/rama_works_m65_bx/config.h @@ -15,7 +15,6 @@ */ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -37,9 +36,6 @@ /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/rama_works_m6_a/config.h b/keyboards/wilba_tech/rama_works_m6_a/config.h index e964bcf21b..db6a753ba5 100644 --- a/keyboards/wilba_tech/rama_works_m6_a/config.h +++ b/keyboards/wilba_tech/rama_works_m6_a/config.h @@ -15,7 +15,6 @@ */ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 1 @@ -37,61 +36,11 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - #define RGB_BACKLIGHT_ENABLED 0 // NOTE: M6-A doesn't use RGB backlight, but we keep this diff --git a/keyboards/wilba_tech/rama_works_m6_b/config.h b/keyboards/wilba_tech/rama_works_m6_b/config.h index 9f29bcb38a..8f334ca22f 100644 --- a/keyboards/wilba_tech/rama_works_m6_b/config.h +++ b/keyboards/wilba_tech/rama_works_m6_b/config.h @@ -15,7 +15,6 @@ */ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 1 @@ -37,61 +36,11 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - #define RGB_BACKLIGHT_ENABLED 1 // This conditionally compiles the backlight code for M6-B specifics diff --git a/keyboards/wilba_tech/rama_works_u80_a/config.h b/keyboards/wilba_tech/rama_works_u80_a/config.h index 9cfc23c8f8..d1dc13de04 100644 --- a/keyboards/wilba_tech/rama_works_u80_a/config.h +++ b/keyboards/wilba_tech/rama_works_u80_a/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 6 @@ -37,50 +36,12 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/wilba_tech/wt60_a/config.h b/keyboards/wilba_tech/wt60_a/config.h index c9079bcb83..e3dd5bc020 100644 --- a/keyboards/wilba_tech/wt60_a/config.h +++ b/keyboards/wilba_tech/wt60_a/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -38,49 +37,11 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION ROW2COL -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/wilba_tech/wt60_b/config.h b/keyboards/wilba_tech/wt60_b/config.h index 2ae153b13f..db00dd3c5d 100644 --- a/keyboards/wilba_tech/wt60_b/config.h +++ b/keyboards/wilba_tech/wt60_b/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -38,10 +37,6 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt60_bx/config.h b/keyboards/wilba_tech/wt60_bx/config.h index 75d0bfbf42..1306649827 100644 --- a/keyboards/wilba_tech/wt60_bx/config.h +++ b/keyboards/wilba_tech/wt60_bx/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -38,10 +37,6 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt60_c/config.h b/keyboards/wilba_tech/wt60_c/config.h index 85beba49c7..122cc94b09 100644 --- a/keyboards/wilba_tech/wt60_c/config.h +++ b/keyboards/wilba_tech/wt60_c/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -38,10 +37,6 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt60_d/config.h b/keyboards/wilba_tech/wt60_d/config.h index 0286015ca0..e57de939b4 100644 --- a/keyboards/wilba_tech/wt60_d/config.h +++ b/keyboards/wilba_tech/wt60_d/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -38,49 +37,11 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/wilba_tech/wt60_g/config.h b/keyboards/wilba_tech/wt60_g/config.h index d0087e9d88..afafca1be6 100644 --- a/keyboards/wilba_tech/wt60_g/config.h +++ b/keyboards/wilba_tech/wt60_g/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -38,9 +37,6 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt60_g2/config.h b/keyboards/wilba_tech/wt60_g2/config.h index f28767c441..3986a461a5 100644 --- a/keyboards/wilba_tech/wt60_g2/config.h +++ b/keyboards/wilba_tech/wt60_g2/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -38,9 +37,6 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt60_h1/config.h b/keyboards/wilba_tech/wt60_h1/config.h index d0087e9d88..afafca1be6 100644 --- a/keyboards/wilba_tech/wt60_h1/config.h +++ b/keyboards/wilba_tech/wt60_h1/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -38,9 +37,6 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt60_h1/info.json b/keyboards/wilba_tech/wt60_h1/info.json index 5260f448ff..f2a05dfae5 100644 --- a/keyboards/wilba_tech/wt60_h1/info.json +++ b/keyboards/wilba_tech/wt60_h1/info.json @@ -8,6 +8,7 @@ "pid": "0x0024", "device_version": "0.0.1" }, + "community_layouts": ["60_tsangan_hhkb"], "layouts": { "LAYOUT_60_tsangan_hhkb": { "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.5}, {"x":1.5, "y":4}, {"x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"x":11, "y":4, "w":1.5}, {"x":12.5, "y":4}, {"x":13.5, "y":4, "w":1.5}] diff --git a/keyboards/wilba_tech/wt60_h1/rules.mk b/keyboards/wilba_tech/wt60_h1/rules.mk index 4b301aee10..e0403a960b 100644 --- a/keyboards/wilba_tech/wt60_h1/rules.mk +++ b/keyboards/wilba_tech/wt60_h1/rules.mk @@ -16,5 +16,3 @@ NKRO_ENABLE = yes # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output - -LAYOUTS = 60_tsangan_hhkb diff --git a/keyboards/wilba_tech/wt60_h2/config.h b/keyboards/wilba_tech/wt60_h2/config.h index d0087e9d88..afafca1be6 100644 --- a/keyboards/wilba_tech/wt60_h2/config.h +++ b/keyboards/wilba_tech/wt60_h2/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -38,9 +37,6 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt60_h3/config.h b/keyboards/wilba_tech/wt60_h3/config.h index d0087e9d88..afafca1be6 100644 --- a/keyboards/wilba_tech/wt60_h3/config.h +++ b/keyboards/wilba_tech/wt60_h3/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -38,9 +37,6 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt60_xt/config.h b/keyboards/wilba_tech/wt60_xt/config.h index df174cddd1..c4032aee27 100644 --- a/keyboards/wilba_tech/wt60_xt/config.h +++ b/keyboards/wilba_tech/wt60_xt/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" #define AUDIO_PIN C6 #define AUDIO_CLICKY @@ -41,49 +40,11 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/wilba_tech/wt65_a/config.h b/keyboards/wilba_tech/wt65_a/config.h index 0d8dd5a0d1..d49d37a189 100644 --- a/keyboards/wilba_tech/wt65_a/config.h +++ b/keyboards/wilba_tech/wt65_a/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -38,49 +37,11 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION ROW2COL -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/wilba_tech/wt65_b/config.h b/keyboards/wilba_tech/wt65_b/config.h index 4bfbcdcb08..c918090699 100644 --- a/keyboards/wilba_tech/wt65_b/config.h +++ b/keyboards/wilba_tech/wt65_b/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -37,50 +36,12 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION ROW2COL - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/wilba_tech/wt65_d/config.h b/keyboards/wilba_tech/wt65_d/config.h index f0cf1acd52..42ff8a5979 100644 --- a/keyboards/wilba_tech/wt65_d/config.h +++ b/keyboards/wilba_tech/wt65_d/config.h @@ -2,7 +2,6 @@ // SPDX-License-Identifier: GPL-2.0-or-later #pragma once -#include "config_common.h" // key matrix size #define MATRIX_ROWS 5 @@ -13,9 +12,6 @@ #define MATRIX_COL_PINS { F5, D5, D3, D2, B7, B0, B3, C7, C6, B6, B5, B4, D7, D6, D4 } #define DIODE_DIRECTION COL2ROW -// Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed -#define DEBOUNCE 5 - #define LED_CAPS_LOCK_PIN F1 // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap diff --git a/keyboards/wilba_tech/wt65_f/config.h b/keyboards/wilba_tech/wt65_f/config.h index 0380f44d28..e89a6844f9 100644 --- a/keyboards/wilba_tech/wt65_f/config.h +++ b/keyboards/wilba_tech/wt65_f/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -38,9 +37,6 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt65_fx/config.h b/keyboards/wilba_tech/wt65_fx/config.h index 0380f44d28..e89a6844f9 100644 --- a/keyboards/wilba_tech/wt65_fx/config.h +++ b/keyboards/wilba_tech/wt65_fx/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -38,9 +37,6 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt65_g/config.h b/keyboards/wilba_tech/wt65_g/config.h index b0f9fc2b54..5948b430db 100644 --- a/keyboards/wilba_tech/wt65_g/config.h +++ b/keyboards/wilba_tech/wt65_g/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -38,9 +37,6 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt65_g2/config.h b/keyboards/wilba_tech/wt65_g2/config.h index b0f9fc2b54..5948b430db 100644 --- a/keyboards/wilba_tech/wt65_g2/config.h +++ b/keyboards/wilba_tech/wt65_g2/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -38,9 +37,6 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt65_h1/config.h b/keyboards/wilba_tech/wt65_h1/config.h index b0f9fc2b54..5948b430db 100644 --- a/keyboards/wilba_tech/wt65_h1/config.h +++ b/keyboards/wilba_tech/wt65_h1/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -38,9 +37,6 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt65_h1/info.json b/keyboards/wilba_tech/wt65_h1/info.json index 9799a06de2..9e594d8978 100644 --- a/keyboards/wilba_tech/wt65_h1/info.json +++ b/keyboards/wilba_tech/wt65_h1/info.json @@ -8,6 +8,7 @@ "pid": "0x0025", "device_version": "0.0.1" }, + "community_layouts": ["65_ansi_blocker_tsangan"], "layouts": { "LAYOUT_65_ansi_blocker_tsangan": { "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.5}, {"x":1.5, "y":4}, {"x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"x":11, "y":4, "w":1.5}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] diff --git a/keyboards/wilba_tech/wt65_h1/rules.mk b/keyboards/wilba_tech/wt65_h1/rules.mk index 6733d8b167..e0403a960b 100644 --- a/keyboards/wilba_tech/wt65_h1/rules.mk +++ b/keyboards/wilba_tech/wt65_h1/rules.mk @@ -16,5 +16,3 @@ NKRO_ENABLE = yes # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output - -LAYOUTS = 65_ansi_blocker_tsangan diff --git a/keyboards/wilba_tech/wt65_xt/config.h b/keyboards/wilba_tech/wt65_xt/config.h index 9cf5524d75..91434b1136 100644 --- a/keyboards/wilba_tech/wt65_xt/config.h +++ b/keyboards/wilba_tech/wt65_xt/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -38,9 +37,6 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt65_xt/keymaps/zunger/keymap.c b/keyboards/wilba_tech/wt65_xt/keymaps/zunger/keymap.c index 45778e1698..b0dfa3e03c 100644 --- a/keyboards/wilba_tech/wt65_xt/keymaps/zunger/keymap.c +++ b/keyboards/wilba_tech/wt65_xt/keymaps/zunger/keymap.c @@ -435,7 +435,7 @@ void toggle_os_mode(void) { set_os_mode((os_mode + 1) % _OS_MODES_MAX); } -void keyboard_post_init_user() { +void keyboard_post_init_user(void) { set_os_mode(_WINDOWS); } diff --git a/keyboards/wilba_tech/wt65_xtx/config.h b/keyboards/wilba_tech/wt65_xtx/config.h index 612b273b95..f9f813b75c 100644 --- a/keyboards/wilba_tech/wt65_xtx/config.h +++ b/keyboards/wilba_tech/wt65_xtx/config.h @@ -15,7 +15,6 @@ */ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -37,9 +36,6 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt69_a/config.h b/keyboards/wilba_tech/wt69_a/config.h index ff67b45038..c13b853038 100644 --- a/keyboards/wilba_tech/wt69_a/config.h +++ b/keyboards/wilba_tech/wt69_a/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -38,49 +37,11 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION ROW2COL -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/wilba_tech/wt70_jb/config.h b/keyboards/wilba_tech/wt70_jb/config.h index d75e258889..b5d7ae5450 100644 --- a/keyboards/wilba_tech/wt70_jb/config.h +++ b/keyboards/wilba_tech/wt70_jb/config.h @@ -15,7 +15,6 @@ */ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -37,9 +36,6 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt70_jb/wt70_jb.c b/keyboards/wilba_tech/wt70_jb/wt70_jb.c index d4f2c5c8da..df44b2f9b8 100644 --- a/keyboards/wilba_tech/wt70_jb/wt70_jb.c +++ b/keyboards/wilba_tech/wt70_jb/wt70_jb.c @@ -49,7 +49,7 @@ void via_init_kb(void) } } -void keyboard_post_init_kb() { +void keyboard_post_init_kb(void) { // This is a workaround to ensure "EEPROM cleared" PCBs will // start with the RGB test mode, essential for testing LEDs. if ( g_first_execution ) { diff --git a/keyboards/wilba_tech/wt75_a/config.h b/keyboards/wilba_tech/wt75_a/config.h index 627069ca09..b8be4507ee 100644 --- a/keyboards/wilba_tech/wt75_a/config.h +++ b/keyboards/wilba_tech/wt75_a/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 6 @@ -38,49 +37,11 @@ /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION ROW2COL -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/wilba_tech/wt75_b/config.h b/keyboards/wilba_tech/wt75_b/config.h index 6d2c9fa17c..a652f66ee3 100644 --- a/keyboards/wilba_tech/wt75_b/config.h +++ b/keyboards/wilba_tech/wt75_b/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 6 @@ -37,50 +36,12 @@ /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION ROW2COL - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/wilba_tech/wt75_c/config.h b/keyboards/wilba_tech/wt75_c/config.h index fcaa9622d4..a55a1e3638 100644 --- a/keyboards/wilba_tech/wt75_c/config.h +++ b/keyboards/wilba_tech/wt75_c/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 6 @@ -38,49 +37,11 @@ /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION ROW2COL -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/wilba_tech/wt80_a/config.h b/keyboards/wilba_tech/wt80_a/config.h index 500d4bc797..4d1973c425 100644 --- a/keyboards/wilba_tech/wt80_a/config.h +++ b/keyboards/wilba_tech/wt80_a/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 6 @@ -38,49 +37,11 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION ROW2COL -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/wilba_tech/wt80_bc/config.h b/keyboards/wilba_tech/wt80_bc/config.h index b82cbda0d0..54c0a7de80 100644 --- a/keyboards/wilba_tech/wt80_bc/config.h +++ b/keyboards/wilba_tech/wt80_bc/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 6 @@ -38,9 +37,6 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt80_g/config.h b/keyboards/wilba_tech/wt80_g/config.h index b82cbda0d0..54c0a7de80 100644 --- a/keyboards/wilba_tech/wt80_g/config.h +++ b/keyboards/wilba_tech/wt80_g/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 6 @@ -38,9 +37,6 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt8_a/config.h b/keyboards/wilba_tech/wt8_a/config.h index 4e7f58bd77..b784d486f8 100644 --- a/keyboards/wilba_tech/wt8_a/config.h +++ b/keyboards/wilba_tech/wt8_a/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 1 @@ -38,46 +37,7 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO diff --git a/keyboards/wilba_tech/zeal60/config.h b/keyboards/wilba_tech/zeal60/config.h index 94a8a599f4..8677d0f87a 100644 --- a/keyboards/wilba_tech/zeal60/config.h +++ b/keyboards/wilba_tech/zeal60/config.h @@ -15,7 +15,6 @@ */ #pragma once -#include "config_common.h" // key matrix size #define MATRIX_ROWS 5 @@ -32,9 +31,6 @@ // COL2ROW or ROW2COL #define DIODE_DIRECTION COL2ROW -// Set 0 if debouncing isn't needed -#define DEBOUNCE 5 - // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap #define LOCKING_SUPPORT_ENABLE // Locking resynchronize hack diff --git a/keyboards/wilba_tech/zeal60/info.json b/keyboards/wilba_tech/zeal60/info.json index e78c268f48..7178ca6b0b 100644 --- a/keyboards/wilba_tech/zeal60/info.json +++ b/keyboards/wilba_tech/zeal60/info.json @@ -8,6 +8,7 @@ "pid": "0x0060", "device_version": "0.0.1" }, + "community_layouts": ["60_ansi", "60_iso", "60_hhkb", "60_ansi_split_bs_rshift"], "layouts": { "LAYOUT_60_all": { "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}] diff --git a/keyboards/wilba_tech/zeal60/rules.mk b/keyboards/wilba_tech/zeal60/rules.mk index ad89233f42..9e89910b3e 100644 --- a/keyboards/wilba_tech/zeal60/rules.mk +++ b/keyboards/wilba_tech/zeal60/rules.mk @@ -24,8 +24,6 @@ RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. CIE1931_CURVE = yes -LAYOUTS = 60_ansi 60_iso 60_hhkb 60_ansi_split_bs_rshift - # project specific files SRC = keyboards/wilba_tech/wt_main.c \ keyboards/wilba_tech/wt_rgb_backlight.c \ diff --git a/keyboards/wilba_tech/zeal65/config.h b/keyboards/wilba_tech/zeal65/config.h index 4cbd12c0a5..c055238722 100644 --- a/keyboards/wilba_tech/zeal65/config.h +++ b/keyboards/wilba_tech/zeal65/config.h @@ -15,7 +15,6 @@ */ #pragma once -#include "config_common.h" // key matrix size #define MATRIX_ROWS 5 @@ -32,9 +31,6 @@ // COL2ROW or ROW2COL #define DIODE_DIRECTION COL2ROW -// Set 0 if debouncing isn't needed -#define DEBOUNCE 5 - // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap #define LOCKING_SUPPORT_ENABLE // Locking resynchronize hack |