diff options
Diffstat (limited to 'keyboards/wilba_tech')
122 files changed, 1140 insertions, 2090 deletions
diff --git a/keyboards/wilba_tech/rama_works_kara/config.h b/keyboards/wilba_tech/rama_works_kara/config.h index 6f8d6f9b8b..d34fd6468c 100644 --- a/keyboards/wilba_tech/rama_works_kara/config.h +++ b/keyboards/wilba_tech/rama_works_kara/config.h @@ -15,18 +15,10 @@ */ #pragma once - -// M60-A PCB default pin-out -#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 } -#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 } - // IS31FL3731 driver #define DRIVER_COUNT 2 #define RGB_MATRIX_LED_COUNT 72 -// COL2ROW or ROW2COL -#define DIODE_DIRECTION COL2ROW - // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap #define LOCKING_SUPPORT_ENABLE // Locking resynchronize hack diff --git a/keyboards/wilba_tech/rama_works_kara/info.json b/keyboards/wilba_tech/rama_works_kara/info.json index 18bba59fe5..3dd9ad22c2 100644 --- a/keyboards/wilba_tech/rama_works_kara/info.json +++ b/keyboards/wilba_tech/rama_works_kara/info.json @@ -8,6 +8,11 @@ "pid": "0x4B52", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"], + "rows": ["F0", "F1", "F4", "F6", "F7"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "atmel-dfu", "community_layouts": ["60_hhkb"], diff --git a/keyboards/wilba_tech/rama_works_koyu/config.h b/keyboards/wilba_tech/rama_works_koyu/config.h index c0b005d443..c3bb43ec6d 100644 --- a/keyboards/wilba_tech/rama_works_koyu/config.h +++ b/keyboards/wilba_tech/rama_works_koyu/config.h @@ -15,18 +15,10 @@ */ #pragma once - -// KOYU PCB pin-out -#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 } -#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 } - // IS31FL3731 driver #define DRIVER_COUNT 2 #define RGB_MATRIX_LED_COUNT 72 -// COL2ROW or ROW2COL -#define DIODE_DIRECTION COL2ROW - // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap #define LOCKING_SUPPORT_ENABLE // Locking resynchronize hack diff --git a/keyboards/wilba_tech/rama_works_koyu/info.json b/keyboards/wilba_tech/rama_works_koyu/info.json index 190638c001..55a180af63 100644 --- a/keyboards/wilba_tech/rama_works_koyu/info.json +++ b/keyboards/wilba_tech/rama_works_koyu/info.json @@ -8,6 +8,11 @@ "pid": "0x4B59", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"], + "rows": ["F0", "F1", "F4", "F6", "F7"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/wilba_tech/rama_works_m10_b/config.h b/keyboards/wilba_tech/rama_works_m10_b/config.h index be92b36639..00ecf5f186 100644 --- a/keyboards/wilba_tech/rama_works_m10_b/config.h +++ b/keyboards/wilba_tech/rama_works_m10_b/config.h @@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { E6 } -#define MATRIX_COL_PINS { D7, B6, F0, D6, B5, F1, D4, B4, F4, F5 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/rama_works_m10_b/info.json b/keyboards/wilba_tech/rama_works_m10_b/info.json index 4b7c87be21..0d80bce8a8 100644 --- a/keyboards/wilba_tech/rama_works_m10_b/info.json +++ b/keyboards/wilba_tech/rama_works_m10_b/info.json @@ -8,6 +8,11 @@ "pid": "0x00AB", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["D7", "B6", "F0", "D6", "B5", "F1", "D4", "B4", "F4", "F5"], + "rows": ["E6"] + }, + "diode_direction": "COL2ROW", "backlight": { "pin": "C6" }, @@ -16,16 +21,19 @@ "layouts": { "LAYOUT": { "layout": [ - { "x": 0, "y": 0 }, - { "x": 1, "y": 0 }, - { "x": 2, "y": 0 }, - { "x": 0, "y": 1 }, - { "x": 1, "y": 1 }, - { "x": 2, "y": 1 }, - { "x": 0, "y": 2 }, - { "x": 1, "y": 2 }, - { "x": 2, "y": 2 }, - { "x": 1, "y": 3, "w": 2.0 } + {"matrix": [0, 0], "x": 0, "y": 0}, + {"matrix": [0, 1], "x": 1, "y": 0}, + {"matrix": [0, 2], "x": 2, "y": 0}, + + {"matrix": [0, 3], "x": 0, "y": 1}, + {"matrix": [0, 4], "x": 1, "y": 1}, + {"matrix": [0, 5], "x": 2, "y": 1}, + + {"matrix": [0, 6], "x": 0, "y": 2}, + {"matrix": [0, 7], "x": 1, "y": 2}, + {"matrix": [0, 8], "x": 2, "y": 2}, + + {"matrix": [0, 9], "x": 1, "y": 3, "w": 2} ] } } diff --git a/keyboards/wilba_tech/rama_works_m10_b/rama_works_m10_b.c b/keyboards/wilba_tech/rama_works_m10_b/rama_works_m10_b.c deleted file mode 100644 index ccff6d62c9..0000000000 --- a/keyboards/wilba_tech/rama_works_m10_b/rama_works_m10_b.c +++ /dev/null @@ -1,17 +0,0 @@ -/* Copyright 2018 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -// Nothing to see here, move along... ;-) diff --git a/keyboards/wilba_tech/rama_works_m10_b/rama_works_m10_b.h b/keyboards/wilba_tech/rama_works_m10_b/rama_works_m10_b.h deleted file mode 100644 index c23a4d003c..0000000000 --- a/keyboards/wilba_tech/rama_works_m10_b/rama_works_m10_b.h +++ /dev/null @@ -1,30 +0,0 @@ -/* Copyright 2018 Wilba - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#pragma once - -#include "quantum.h" - -// This a shortcut to help you visually see your layout. -// The first section contains all of the arguments -// The second converts the arguments into a two-dimensional array -#define LAYOUT( \ - k00, k01, k02, \ - k03, k04, k05, \ - k06, k07, k08, \ - k09 \ -) { \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09 } \ -} diff --git a/keyboards/wilba_tech/rama_works_m10_c/config.h b/keyboards/wilba_tech/rama_works_m10_c/config.h index 9f68eb4287..1cc9655b1b 100644 --- a/keyboards/wilba_tech/rama_works_m10_c/config.h +++ b/keyboards/wilba_tech/rama_works_m10_c/config.h @@ -15,23 +15,6 @@ */ #pragma once - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { E6 } -#define MATRIX_COL_PINS { D7, B6, F0, D6, B5, F1, D4, B4, F4, F5 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/rama_works_m10_c/info.json b/keyboards/wilba_tech/rama_works_m10_c/info.json index b60dd53815..64af4a5dcf 100644 --- a/keyboards/wilba_tech/rama_works_m10_c/info.json +++ b/keyboards/wilba_tech/rama_works_m10_c/info.json @@ -8,11 +8,30 @@ "pid": "0x00AC", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["D7", "B6", "F0", "D6", "B5", "F1", "D4", "B4", "F4", "F5"], + "rows": ["E6"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { - "layout": [{"label":"0,0", "x":0, "y":0}, {"label":"0,1", "x":1, "y":0}, {"label":"0,2", "x":2, "y":0}, {"label":"0,3", "x":0, "y":1}, {"label":"0,4", "x":1, "y":1}, {"label":"0,5", "x":2, "y":1}, {"label":"0,6", "x":0, "y":2}, {"label":"0,7", "x":1, "y":2}, {"label":"0,8", "x":2, "y":2}, {"label":"0,9", "x":1, "y":3, "w":2}] + "layout": [ + {"matrix": [0, 0], "x": 0, "y": 0}, + {"matrix": [0, 1], "x": 1, "y": 0}, + {"matrix": [0, 2], "x": 2, "y": 0}, + + {"matrix": [0, 3], "x": 0, "y": 1}, + {"matrix": [0, 4], "x": 1, "y": 1}, + {"matrix": [0, 5], "x": 2, "y": 1}, + + {"matrix": [0, 6], "x": 0, "y": 2}, + {"matrix": [0, 7], "x": 1, "y": 2}, + {"matrix": [0, 8], "x": 2, "y": 2}, + + {"matrix": [0, 9], "x": 1, "y": 3, "w": 2} + ] } } } diff --git a/keyboards/wilba_tech/rama_works_m10_c/rama_works_m10_c.h b/keyboards/wilba_tech/rama_works_m10_c/rama_works_m10_c.h index 382cef1a6d..24dae9d7d0 100644 --- a/keyboards/wilba_tech/rama_works_m10_c/rama_works_m10_c.h +++ b/keyboards/wilba_tech/rama_works_m10_c/rama_works_m10_c.h @@ -18,18 +18,3 @@ #include "quantum.h" #include "keyboards/wilba_tech/wt_rgb_backlight_keycodes.h" #include "via.h" - - -/* This is a shortcut to help you visually see your layout. - * - * The first section contains all of the arguments representing the physical - * layout of the board and position of the keys. - * - * The second converts the arguments into a two-dimensional array which - * represents the switch matrix. - */ -#define LAYOUT( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09 \ -) { \ - {K00, K01, K02, K03, K04, K05, K06, K07, K08, K09}, \ -} diff --git a/keyboards/wilba_tech/rama_works_m50_a/config.h b/keyboards/wilba_tech/rama_works_m50_a/config.h index 79a1614268..ab04ab070b 100644 --- a/keyboards/wilba_tech/rama_works_m50_a/config.h +++ b/keyboards/wilba_tech/rama_works_m50_a/config.h @@ -15,23 +15,6 @@ */ #pragma once - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F0, F1, F5, F6 } -#define MATRIX_COL_PINS { F4, B5, C7, C6, B6, B2, B3, B1, B4, D7, D6, D4, D3 } - -/* COL2ROW, ROW2COL */ -#define DIODE_DIRECTION COL2ROW - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/rama_works_m50_a/info.json b/keyboards/wilba_tech/rama_works_m50_a/info.json index a53a960f0a..e26b56dd2f 100644 --- a/keyboards/wilba_tech/rama_works_m50_a/info.json +++ b/keyboards/wilba_tech/rama_works_m50_a/info.json @@ -8,6 +8,11 @@ "pid": "0x050A", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["F4", "B5", "C7", "C6", "B6", "B2", "B3", "B1", "B4", "D7", "D6", "D4", "D3"], + "rows": ["F0", "F1", "F5", "F6"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/wilba_tech/rama_works_m50_ax/config.h b/keyboards/wilba_tech/rama_works_m50_ax/config.h index add6c1c779..9b6b3c7955 100644 --- a/keyboards/wilba_tech/rama_works_m50_ax/config.h +++ b/keyboards/wilba_tech/rama_works_m50_ax/config.h @@ -15,23 +15,6 @@ */ #pragma once - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F0, F1, F5, F6 } -#define MATRIX_COL_PINS { F4, B5, C7, C6, B6, B2, B3, B1, B4, D7, D6, D4, D3 } - -/* COL2ROW, ROW2COL */ -#define DIODE_DIRECTION COL2ROW - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/rama_works_m50_ax/info.json b/keyboards/wilba_tech/rama_works_m50_ax/info.json index 2fc265fec9..fc296c2754 100644 --- a/keyboards/wilba_tech/rama_works_m50_ax/info.json +++ b/keyboards/wilba_tech/rama_works_m50_ax/info.json @@ -8,6 +8,11 @@ "pid": "0x150A", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["F4", "B5", "C7", "C6", "B6", "B2", "B3", "B1", "B4", "D7", "D6", "D4", "D3"], + "rows": ["F0", "F1", "F5", "F6"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/wilba_tech/rama_works_m50_ax/rama_works_m50_ax.c b/keyboards/wilba_tech/rama_works_m50_ax/rama_works_m50_ax.c deleted file mode 100644 index 86d93b82a1..0000000000 --- a/keyboards/wilba_tech/rama_works_m50_ax/rama_works_m50_ax.c +++ /dev/null @@ -1,17 +0,0 @@ -/* Copyright 2020 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "rama_works_m50_ax.h" diff --git a/keyboards/wilba_tech/rama_works_m60_a/config.h b/keyboards/wilba_tech/rama_works_m60_a/config.h index acc21edc28..c80a018496 100644 --- a/keyboards/wilba_tech/rama_works_m60_a/config.h +++ b/keyboards/wilba_tech/rama_works_m60_a/config.h @@ -15,18 +15,10 @@ */ #pragma once - -// M60-A PCB default pin-out -#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 } -#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 } - // IS31FL3731 driver #define DRIVER_COUNT 2 #define RGB_MATRIX_LED_COUNT 72 -// COL2ROW or ROW2COL -#define DIODE_DIRECTION COL2ROW - // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap #define LOCKING_SUPPORT_ENABLE // Locking resynchronize hack diff --git a/keyboards/wilba_tech/rama_works_m60_a/info.json b/keyboards/wilba_tech/rama_works_m60_a/info.json index d76b178947..8ba17a5df2 100644 --- a/keyboards/wilba_tech/rama_works_m60_a/info.json +++ b/keyboards/wilba_tech/rama_works_m60_a/info.json @@ -8,6 +8,11 @@ "pid": "0x060A", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"], + "rows": ["F0", "F1", "F4", "F6", "F7"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "atmel-dfu", "community_layouts": ["60_hhkb"], diff --git a/keyboards/wilba_tech/rama_works_m65_b/config.h b/keyboards/wilba_tech/rama_works_m65_b/config.h index 5b745b109d..6d3f0fb97f 100644 --- a/keyboards/wilba_tech/rama_works_m65_b/config.h +++ b/keyboards/wilba_tech/rama_works_m65_b/config.h @@ -15,23 +15,6 @@ */ #pragma once - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 } -#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 } - -/* COL2ROW, ROW2COL */ -#define DIODE_DIRECTION COL2ROW - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/rama_works_m65_b/info.json b/keyboards/wilba_tech/rama_works_m65_b/info.json index 55f9f05536..a8ca36bf16 100644 --- a/keyboards/wilba_tech/rama_works_m65_b/info.json +++ b/keyboards/wilba_tech/rama_works_m65_b/info.json @@ -8,6 +8,11 @@ "pid": "0x065B", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"], + "rows": ["F0", "F1", "F4", "F6", "F7"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/wilba_tech/rama_works_m65_bx/config.h b/keyboards/wilba_tech/rama_works_m65_bx/config.h index eb2b08304a..e367a7fc76 100644 --- a/keyboards/wilba_tech/rama_works_m65_bx/config.h +++ b/keyboards/wilba_tech/rama_works_m65_bx/config.h @@ -15,23 +15,6 @@ */ #pragma once - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 } -#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 } - -/* COL2ROW, ROW2COL */ -#define DIODE_DIRECTION COL2ROW - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/rama_works_m65_bx/info.json b/keyboards/wilba_tech/rama_works_m65_bx/info.json index ca5bf2b21e..1e4af340db 100644 --- a/keyboards/wilba_tech/rama_works_m65_bx/info.json +++ b/keyboards/wilba_tech/rama_works_m65_bx/info.json @@ -8,6 +8,11 @@ "pid": "0x165B", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"], + "rows": ["F0", "F1", "F4", "F6", "F7"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/wilba_tech/rama_works_m6_a/config.h b/keyboards/wilba_tech/rama_works_m6_a/config.h index 9937b3f5be..6a19f1e7e9 100644 --- a/keyboards/wilba_tech/rama_works_m6_a/config.h +++ b/keyboards/wilba_tech/rama_works_m6_a/config.h @@ -15,23 +15,6 @@ */ #pragma once - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { E6 } -#define MATRIX_COL_PINS { D4, B5, F4, D7, C6, F6 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/rama_works_m6_a/info.json b/keyboards/wilba_tech/rama_works_m6_a/info.json index 67912b6ce0..73091d3036 100644 --- a/keyboards/wilba_tech/rama_works_m6_a/info.json +++ b/keyboards/wilba_tech/rama_works_m6_a/info.json @@ -8,17 +8,23 @@ "pid": "0x006A", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["D4", "B5", "F4", "D7", "C6", "F6"], + "rows": ["E6"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [ - { "x": 0, "y": 0 }, - { "x": 1, "y": 0 }, - { "x": 2, "y": 0 }, - { "x": 0, "y": 1 }, - { "x": 1, "y": 1 }, - { "x": 2, "y": 1 } + {"matrix": [0, 0], "x": 0, "y": 0}, + {"matrix": [0, 1], "x": 1, "y": 0}, + {"matrix": [0, 2], "x": 2, "y": 0}, + + {"matrix": [0, 3], "x": 0, "y": 1}, + {"matrix": [0, 4], "x": 1, "y": 1}, + {"matrix": [0, 5], "x": 2, "y": 1} ] } } diff --git a/keyboards/wilba_tech/rama_works_m6_a/rama_works_m6_a.c b/keyboards/wilba_tech/rama_works_m6_a/rama_works_m6_a.c deleted file mode 100644 index fa19003600..0000000000 --- a/keyboards/wilba_tech/rama_works_m6_a/rama_works_m6_a.c +++ /dev/null @@ -1,15 +0,0 @@ -/* Copyright 2018 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ diff --git a/keyboards/wilba_tech/rama_works_m6_a/rama_works_m6_a.h b/keyboards/wilba_tech/rama_works_m6_a/rama_works_m6_a.h deleted file mode 100644 index 0a38581450..0000000000 --- a/keyboards/wilba_tech/rama_works_m6_a/rama_works_m6_a.h +++ /dev/null @@ -1,29 +0,0 @@ -/* Copyright 2018 Wilba - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include "quantum.h" - -// This a shortcut to help you visually see your layout. -// The first section contains all of the arguments -// The second converts the arguments into a two-dimensional array -#define LAYOUT( \ - k00, k01, k02, \ - k03, k04, k05 \ -) { \ - { k00, k01, k02, k03, k04, k05 } \ -} diff --git a/keyboards/wilba_tech/rama_works_m6_b/config.h b/keyboards/wilba_tech/rama_works_m6_b/config.h index 6b6b405cd0..a117bcc2a8 100644 --- a/keyboards/wilba_tech/rama_works_m6_b/config.h +++ b/keyboards/wilba_tech/rama_works_m6_b/config.h @@ -15,23 +15,6 @@ */ #pragma once - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { E6 } -#define MATRIX_COL_PINS { D4, B5, F4, D7, C6, F6 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/rama_works_m6_b/info.json b/keyboards/wilba_tech/rama_works_m6_b/info.json index 96fc84b002..4356011aae 100644 --- a/keyboards/wilba_tech/rama_works_m6_b/info.json +++ b/keyboards/wilba_tech/rama_works_m6_b/info.json @@ -8,17 +8,23 @@ "pid": "0x006B", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["D4", "B5", "F4", "D7", "C6", "F6"], + "rows": ["E6"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [ - { "x": 0, "y": 0 }, - { "x": 1, "y": 0 }, - { "x": 2, "y": 0 }, - { "x": 0, "y": 1 }, - { "x": 1, "y": 1 }, - { "x": 2, "y": 1 } + {"matrix": [0, 0], "x": 0, "y": 0}, + {"matrix": [0, 1], "x": 1, "y": 0}, + {"matrix": [0, 2], "x": 2, "y": 0}, + + {"matrix": [0, 3], "x": 0, "y": 1}, + {"matrix": [0, 4], "x": 1, "y": 1}, + {"matrix": [0, 5], "x": 2, "y": 1} ] } } diff --git a/keyboards/wilba_tech/rama_works_m6_b/rama_works_m6_b.h b/keyboards/wilba_tech/rama_works_m6_b/rama_works_m6_b.h deleted file mode 100644 index bd4158bcb1..0000000000 --- a/keyboards/wilba_tech/rama_works_m6_b/rama_works_m6_b.h +++ /dev/null @@ -1,28 +0,0 @@ -/* Copyright 2018 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#pragma once - -#include "quantum.h" - -// This a shortcut to help you visually see your layout. -// The first section contains all of the arguments -// The second converts the arguments into a two-dimensional array -#define LAYOUT( \ - K00, K01, K02, K03, K04, K05) \ - { \ - {K00, K01, K02, K03, K04, K05}, \ - } - diff --git a/keyboards/wilba_tech/rama_works_u80_a/config.h b/keyboards/wilba_tech/rama_works_u80_a/config.h index 8a94e15b47..cb2d88bd47 100644 --- a/keyboards/wilba_tech/rama_works_u80_a/config.h +++ b/keyboards/wilba_tech/rama_works_u80_a/config.h @@ -16,23 +16,6 @@ #pragma once - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F1, F0, E6, F4, F6, F7 } -#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4, B7, B0 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/rama_works_u80_a/info.json b/keyboards/wilba_tech/rama_works_u80_a/info.json index 27a5fe7148..2ee00ae161 100644 --- a/keyboards/wilba_tech/rama_works_u80_a/info.json +++ b/keyboards/wilba_tech/rama_works_u80_a/info.json @@ -8,6 +8,11 @@ "pid": "0x080A", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "B7", "B0"], + "rows": ["F1", "F0", "E6", "F4", "F6", "F7"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/wilba_tech/rama_works_u80_a/rama_works_u80_a.c b/keyboards/wilba_tech/rama_works_u80_a/rama_works_u80_a.c deleted file mode 100644 index ccff6d62c9..0000000000 --- a/keyboards/wilba_tech/rama_works_u80_a/rama_works_u80_a.c +++ /dev/null @@ -1,17 +0,0 @@ -/* Copyright 2018 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -// Nothing to see here, move along... ;-) diff --git a/keyboards/wilba_tech/wt60_a/config.h b/keyboards/wilba_tech/wt60_a/config.h index 0179cfaa64..488eeade83 100644 --- a/keyboards/wilba_tech/wt60_a/config.h +++ b/keyboards/wilba_tech/wt60_a/config.h @@ -16,23 +16,6 @@ #pragma once - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F0, E6, F4, F6, F7 } -#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION ROW2COL - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt60_a/info.json b/keyboards/wilba_tech/wt60_a/info.json index 85b1e2e6a1..e429b635de 100644 --- a/keyboards/wilba_tech/wt60_a/info.json +++ b/keyboards/wilba_tech/wt60_a/info.json @@ -8,6 +8,11 @@ "pid": "0x060A", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"], + "rows": ["F0", "E6", "F4", "F6", "F7"] + }, + "diode_direction": "ROW2COL", "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/wilba_tech/wt60_a/wt60_a.c b/keyboards/wilba_tech/wt60_a/wt60_a.c deleted file mode 100644 index ccff6d62c9..0000000000 --- a/keyboards/wilba_tech/wt60_a/wt60_a.c +++ /dev/null @@ -1,17 +0,0 @@ -/* Copyright 2018 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -// Nothing to see here, move along... ;-) diff --git a/keyboards/wilba_tech/wt60_b/config.h b/keyboards/wilba_tech/wt60_b/config.h index 887e11c81f..cf495a2e78 100644 --- a/keyboards/wilba_tech/wt60_b/config.h +++ b/keyboards/wilba_tech/wt60_b/config.h @@ -16,23 +16,6 @@ #pragma once - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 } -#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt60_b/info.json b/keyboards/wilba_tech/wt60_b/info.json index 6e8d463abb..1a9338a5c8 100644 --- a/keyboards/wilba_tech/wt60_b/info.json +++ b/keyboards/wilba_tech/wt60_b/info.json @@ -8,6 +8,11 @@ "pid": "0x60B0", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"], + "rows": ["F0", "F1", "F4", "F6", "F7"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/wilba_tech/wt60_b/wt60_b.c b/keyboards/wilba_tech/wt60_b/wt60_b.c deleted file mode 100644 index 051cbc6d43..0000000000 --- a/keyboards/wilba_tech/wt60_b/wt60_b.c +++ /dev/null @@ -1 +0,0 @@ -#include "wt60_b.h" diff --git a/keyboards/wilba_tech/wt60_bx/config.h b/keyboards/wilba_tech/wt60_bx/config.h index 5bc298d70e..6f89b14954 100644 --- a/keyboards/wilba_tech/wt60_bx/config.h +++ b/keyboards/wilba_tech/wt60_bx/config.h @@ -16,23 +16,6 @@ #pragma once - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 } -#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt60_bx/info.json b/keyboards/wilba_tech/wt60_bx/info.json index 8c3cf7de2a..9b63c7f8e7 100644 --- a/keyboards/wilba_tech/wt60_bx/info.json +++ b/keyboards/wilba_tech/wt60_bx/info.json @@ -8,6 +8,11 @@ "pid": "0x60B1", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"], + "rows": ["F0", "F1", "F4", "F6", "F7"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/wilba_tech/wt60_bx/wt60_bx.c b/keyboards/wilba_tech/wt60_bx/wt60_bx.c deleted file mode 100644 index 2a52888ca0..0000000000 --- a/keyboards/wilba_tech/wt60_bx/wt60_bx.c +++ /dev/null @@ -1 +0,0 @@ -#include "wt60_bx.h" diff --git a/keyboards/wilba_tech/wt60_c/config.h b/keyboards/wilba_tech/wt60_c/config.h index 7b7fdaf020..776aebcf20 100644 --- a/keyboards/wilba_tech/wt60_c/config.h +++ b/keyboards/wilba_tech/wt60_c/config.h @@ -16,23 +16,6 @@ #pragma once - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 } -#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt60_c/info.json b/keyboards/wilba_tech/wt60_c/info.json index b39a2786a4..b23b639c7e 100644 --- a/keyboards/wilba_tech/wt60_c/info.json +++ b/keyboards/wilba_tech/wt60_c/info.json @@ -8,6 +8,11 @@ "pid": "0x60C0", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"], + "rows": ["F0", "F1", "F4", "F6", "F7"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/wilba_tech/wt60_c/wt60_c.c b/keyboards/wilba_tech/wt60_c/wt60_c.c deleted file mode 100644 index 9b1cfe46e5..0000000000 --- a/keyboards/wilba_tech/wt60_c/wt60_c.c +++ /dev/null @@ -1 +0,0 @@ -#include "wt60_c.h" diff --git a/keyboards/wilba_tech/wt60_g/config.h b/keyboards/wilba_tech/wt60_g/config.h index 3264526694..9541b1df12 100644 --- a/keyboards/wilba_tech/wt60_g/config.h +++ b/keyboards/wilba_tech/wt60_g/config.h @@ -16,23 +16,6 @@ #pragma once - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 } -#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 } // D4, B7, B0 - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt60_g/info.json b/keyboards/wilba_tech/wt60_g/info.json index 5c22b6dc21..113729e250 100644 --- a/keyboards/wilba_tech/wt60_g/info.json +++ b/keyboards/wilba_tech/wt60_g/info.json @@ -8,6 +8,11 @@ "pid": "0x0021", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"], + "rows": ["F0", "F1", "F4", "F6", "F7"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/wilba_tech/wt60_g/wt60_g.c b/keyboards/wilba_tech/wt60_g/wt60_g.c deleted file mode 100644 index 1c1eed8847..0000000000 --- a/keyboards/wilba_tech/wt60_g/wt60_g.c +++ /dev/null @@ -1,17 +0,0 @@ -/* Copyright 2020 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "wt60_g.h" diff --git a/keyboards/wilba_tech/wt60_g2/config.h b/keyboards/wilba_tech/wt60_g2/config.h index c841f6365a..b7d24e1cd3 100644 --- a/keyboards/wilba_tech/wt60_g2/config.h +++ b/keyboards/wilba_tech/wt60_g2/config.h @@ -16,23 +16,6 @@ #pragma once - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 } -#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 } // D4, B7, B0 - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt60_g2/info.json b/keyboards/wilba_tech/wt60_g2/info.json index 33b0fd0d50..b1d34eb65d 100644 --- a/keyboards/wilba_tech/wt60_g2/info.json +++ b/keyboards/wilba_tech/wt60_g2/info.json @@ -8,6 +8,11 @@ "pid": "0x002F", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"], + "rows": ["F0", "F1", "F4", "F6", "F7"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/wilba_tech/wt60_g2/wt60_g2.c b/keyboards/wilba_tech/wt60_g2/wt60_g2.c deleted file mode 100644 index ac7b7151d0..0000000000 --- a/keyboards/wilba_tech/wt60_g2/wt60_g2.c +++ /dev/null @@ -1,17 +0,0 @@ -/* Copyright 2021 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "wt60_g2.h" diff --git a/keyboards/wilba_tech/wt60_h1/info.json b/keyboards/wilba_tech/wt60_h1/info.json index d037f73761..a6b200ed7e 100644 --- a/keyboards/wilba_tech/wt60_h1/info.json +++ b/keyboards/wilba_tech/wt60_h1/info.json @@ -8,13 +8,13 @@ "pid": "0x0024", "device_version": "0.0.1" }, - "processor": "atmega32u4", - "bootloader": "atmel-dfu", - "diode_direction": "COL2ROW", "matrix_pins": { - "rows": ["F0", "F1", "F4", "F6", "F7"], - "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"] + "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"], + "rows": ["F0", "F1", "F4", "F6", "F7"] }, + "diode_direction": "COL2ROW", + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "community_layouts": ["60_ansi_split_bs_rshift"], "layout_aliases": { "LAYOUT_all": "LAYOUT_60_ansi_split_bs_rshift" diff --git a/keyboards/wilba_tech/wt60_h2/config.h b/keyboards/wilba_tech/wt60_h2/config.h index 3264526694..9541b1df12 100644 --- a/keyboards/wilba_tech/wt60_h2/config.h +++ b/keyboards/wilba_tech/wt60_h2/config.h @@ -16,23 +16,6 @@ #pragma once - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 } -#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 } // D4, B7, B0 - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt60_h2/info.json b/keyboards/wilba_tech/wt60_h2/info.json index e9c59d1b8c..046a8526bc 100644 --- a/keyboards/wilba_tech/wt60_h2/info.json +++ b/keyboards/wilba_tech/wt60_h2/info.json @@ -8,6 +8,11 @@ "pid": "0x002B", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"], + "rows": ["F0", "F1", "F4", "F6", "F7"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/wilba_tech/wt60_h2/wt60_h2.c b/keyboards/wilba_tech/wt60_h2/wt60_h2.c deleted file mode 100644 index 705535c18e..0000000000 --- a/keyboards/wilba_tech/wt60_h2/wt60_h2.c +++ /dev/null @@ -1,17 +0,0 @@ -/* Copyright 2020 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "wt60_h2.h" diff --git a/keyboards/wilba_tech/wt60_h3/info.json b/keyboards/wilba_tech/wt60_h3/info.json index 57bb26c243..167de96a03 100644 --- a/keyboards/wilba_tech/wt60_h3/info.json +++ b/keyboards/wilba_tech/wt60_h3/info.json @@ -8,13 +8,13 @@ "pid": "0x002C", "device_version": "0.0.1" }, - "processor": "atmega32u4", - "bootloader": "atmel-dfu", - "diode_direction": "COL2ROW", "matrix_pins": { - "rows": ["F0", "F1", "F4", "F6", "F7"], - "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"] + "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"], + "rows": ["F0", "F1", "F4", "F6", "F7"] }, + "diode_direction": "COL2ROW", + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "community_layouts": ["60_iso_split_bs_rshift"], "layout_aliases": { "LAYOUT_all": "LAYOUT_60_iso_split_bs_rshift" diff --git a/keyboards/wilba_tech/wt60_xt/config.h b/keyboards/wilba_tech/wt60_xt/config.h index 888197a216..ea2f490317 100644 --- a/keyboards/wilba_tech/wt60_xt/config.h +++ b/keyboards/wilba_tech/wt60_xt/config.h @@ -20,22 +20,6 @@ #define AUDIO_PIN C6 #define AUDIO_CLICKY -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F0, E6, F4, F6, F7 } -#define MATRIX_COL_PINS { B7, B0, F5, D5, B1, B2, B3, D3, D2, C7, B6, B5, B4, D7, D6, D4 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt60_xt/info.json b/keyboards/wilba_tech/wt60_xt/info.json index d31d8380b1..edbd17a5c3 100644 --- a/keyboards/wilba_tech/wt60_xt/info.json +++ b/keyboards/wilba_tech/wt60_xt/info.json @@ -8,6 +8,11 @@ "pid": "0x001C", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["B7", "B0", "F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "B6", "B5", "B4", "D7", "D6", "D4"], + "rows": ["F0", "E6", "F4", "F6", "F7"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/wilba_tech/wt65_a/config.h b/keyboards/wilba_tech/wt65_a/config.h index 906887f3fa..aa75002b4f 100644 --- a/keyboards/wilba_tech/wt65_a/config.h +++ b/keyboards/wilba_tech/wt65_a/config.h @@ -16,23 +16,6 @@ #pragma once - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F0, E6, F4, F6, F7 } -#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION ROW2COL - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt65_a/info.json b/keyboards/wilba_tech/wt65_a/info.json index 1c73d40556..1b56bd785c 100644 --- a/keyboards/wilba_tech/wt65_a/info.json +++ b/keyboards/wilba_tech/wt65_a/info.json @@ -8,6 +8,11 @@ "pid": "0x065A", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"], + "rows": ["F0", "E6", "F4", "F6", "F7"] + }, + "diode_direction": "ROW2COL", "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/wilba_tech/wt65_a/wt65_a.c b/keyboards/wilba_tech/wt65_a/wt65_a.c deleted file mode 100644 index ccff6d62c9..0000000000 --- a/keyboards/wilba_tech/wt65_a/wt65_a.c +++ /dev/null @@ -1,17 +0,0 @@ -/* Copyright 2018 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -// Nothing to see here, move along... ;-) diff --git a/keyboards/wilba_tech/wt65_b/config.h b/keyboards/wilba_tech/wt65_b/config.h index 2cec4c23d7..60cdbe4cc6 100644 --- a/keyboards/wilba_tech/wt65_b/config.h +++ b/keyboards/wilba_tech/wt65_b/config.h @@ -16,23 +16,6 @@ #pragma once - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F0, E6, F4, F6, F7 } -#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION ROW2COL - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt65_b/info.json b/keyboards/wilba_tech/wt65_b/info.json index 17dc827d55..5ac0d81f28 100644 --- a/keyboards/wilba_tech/wt65_b/info.json +++ b/keyboards/wilba_tech/wt65_b/info.json @@ -8,6 +8,11 @@ "pid": "0x065B", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"], + "rows": ["F0", "E6", "F4", "F6", "F7"] + }, + "diode_direction": "ROW2COL", "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/wilba_tech/wt65_b/wt65_b.c b/keyboards/wilba_tech/wt65_b/wt65_b.c deleted file mode 100644 index 365f2e8861..0000000000 --- a/keyboards/wilba_tech/wt65_b/wt65_b.c +++ /dev/null @@ -1,17 +0,0 @@ -/* Copyright 2019 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -// Nothing to see here, move along... ;-) diff --git a/keyboards/wilba_tech/wt65_d/config.h b/keyboards/wilba_tech/wt65_d/config.h index d383760f19..f37e4b2db6 100644 --- a/keyboards/wilba_tech/wt65_d/config.h +++ b/keyboards/wilba_tech/wt65_d/config.h @@ -3,11 +3,6 @@ #pragma once -// Keyboard Matrix Assignments -#define MATRIX_ROW_PINS { E6, F0, F4, F6, F7 } -#define MATRIX_COL_PINS { F5, D5, D3, D2, B7, B0, B3, C7, C6, B6, B5, B4, D7, D6, D4 } -#define DIODE_DIRECTION COL2ROW - // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/wilba_tech/wt65_d/info.json b/keyboards/wilba_tech/wt65_d/info.json index 68dc46d548..b9fd2dcf46 100644 --- a/keyboards/wilba_tech/wt65_d/info.json +++ b/keyboards/wilba_tech/wt65_d/info.json @@ -8,6 +8,11 @@ "pid": "0x0031", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["F5", "D5", "D3", "D2", "B7", "B0", "B3", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"], + "rows": ["E6", "F0", "F4", "F6", "F7"] + }, + "diode_direction": "COL2ROW", "indicators": { "caps_lock": "F1" }, @@ -16,688 +21,688 @@ "layouts": { "LAYOUT_all": { "layout": [ - {"label":"0,0", "x":0, "y":0}, - {"label":"0,3", "x":1, "y":0}, - {"label":"0,2", "x":2, "y":0}, - {"label":"0,1", "x":3, "y":0}, - {"label":"0,4", "x":4, "y":0}, - {"label":"0,5", "x":5, "y":0}, - {"label":"0,6", "x":6, "y":0}, - {"label":"0,7", "x":7, "y":0}, - {"label":"0,8", "x":8, "y":0}, - {"label":"0,9", "x":9, "y":0}, - {"label":"0,12", "x":10, "y":0}, - {"label":"0,11", "x":11, "y":0}, - {"label":"0,10", "x":12, "y":0}, - {"label":"0,13", "x":13, "y":0}, - {"label":"2,13", "x":14, "y":0}, - {"label":"0,14", "x":15, "y":0}, - - {"label":"1,0", "x":0, "y":1, "w":1.5}, - {"label":"1,1", "x":1.5, "y":1}, - {"label":"1,2", "x":2.5, "y":1}, - {"label":"1,3", "x":3.5, "y":1}, - {"label":"1,4", "x":4.5, "y":1}, - {"label":"1,5", "x":5.5, "y":1}, - {"label":"1,6", "x":6.5, "y":1}, - {"label":"1,7", "x":7.5, "y":1}, - {"label":"1,8", "x":8.5, "y":1}, - {"label":"1,9", "x":9.5, "y":1}, - {"label":"1,10", "x":10.5, "y":1}, - {"label":"1,11", "x":11.5, "y":1}, - {"label":"1,12", "x":12.5, "y":1}, - {"label":"1,13", "x":13.5, "y":1, "w":1.5}, - {"label":"1,14", "x":15, "y":1}, - - {"label":"2,0", "x":0, "y":2, "w":1.75}, - {"label":"2,1", "x":1.75, "y":2}, - {"label":"2,2", "x":2.75, "y":2}, - {"label":"2,3", "x":3.75, "y":2}, - {"label":"2,4", "x":4.75, "y":2}, - {"label":"2,5", "x":5.75, "y":2}, - {"label":"2,6", "x":6.75, "y":2}, - {"label":"2,7", "x":7.75, "y":2}, - {"label":"2,8", "x":8.75, "y":2}, - {"label":"2,9", "x":9.75, "y":2}, - {"label":"2,10", "x":10.75, "y":2}, - {"label":"2,11", "x":11.75, "y":2}, - {"label":"2,12", "x":12.75, "y":2, "w":2.25}, - {"label":"2,14", "x":15, "y":2}, - - {"label":"3,0", "x":0, "y":3, "w":1.25}, - {"label":"3,1", "x":1.25, "y":3}, - {"label":"3,2", "x":2.25, "y":3}, - {"label":"3,3", "x":3.25, "y":3}, - {"label":"3,4", "x":4.25, "y":3}, - {"label":"3,5", "x":5.25, "y":3}, - {"label":"3,6", "x":6.25, "y":3}, - {"label":"3,7", "x":7.25, "y":3}, - {"label":"3,8", "x":8.25, "y":3}, - {"label":"3,9", "x":9.25, "y":3}, - {"label":"3,10", "x":10.25, "y":3}, - {"label":"3,11", "x":11.25, "y":3}, - {"label":"3,12", "x":12.25, "y":3, "w":1.75}, - {"label":"3,13", "x":14, "y":3}, - {"label":"3,14", "x":15, "y":3}, - - {"label":"4,0", "x":0, "y":4, "w":1.25}, - {"label":"4,1", "x":1.25, "y":4}, - {"label":"4,2", "x":2.25, "y":4, "w":1.25}, - {"label":"4,3", "x":3.5, "y":4, "w":6}, - {"label":"4,9", "x":9.5, "y":4, "w":1.25}, - {"label":"4,10", "x":10.75, "y":4}, - {"label":"4,11", "x":11.75, "y":4, "w":1.25}, - {"label":"4,12", "x":13, "y":4}, - {"label":"4,13", "x":14, "y":4}, - {"label":"4,14", "x":15, "y":4} + {"matrix": [0, 0], "x": 0, "y": 0}, + {"matrix": [0, 3], "x": 1, "y": 0}, + {"matrix": [0, 2], "x": 2, "y": 0}, + {"matrix": [0, 1], "x": 3, "y": 0}, + {"matrix": [0, 4], "x": 4, "y": 0}, + {"matrix": [0, 5], "x": 5, "y": 0}, + {"matrix": [0, 6], "x": 6, "y": 0}, + {"matrix": [0, 7], "x": 7, "y": 0}, + {"matrix": [0, 8], "x": 8, "y": 0}, + {"matrix": [0, 9], "x": 9, "y": 0}, + {"matrix": [0, 12], "x": 10, "y": 0}, + {"matrix": [0, 11], "x": 11, "y": 0}, + {"matrix": [0, 10], "x": 12, "y": 0}, + {"matrix": [0, 13], "x": 13, "y": 0}, + {"matrix": [2, 13], "x": 14, "y": 0}, + {"matrix": [0, 14], "x": 15, "y": 0}, + + {"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5}, + {"matrix": [1, 1], "x": 1.5, "y": 1}, + {"matrix": [1, 2], "x": 2.5, "y": 1}, + {"matrix": [1, 3], "x": 3.5, "y": 1}, + {"matrix": [1, 4], "x": 4.5, "y": 1}, + {"matrix": [1, 5], "x": 5.5, "y": 1}, + {"matrix": [1, 6], "x": 6.5, "y": 1}, + {"matrix": [1, 7], "x": 7.5, "y": 1}, + {"matrix": [1, 8], "x": 8.5, "y": 1}, + {"matrix": [1, 9], "x": 9.5, "y": 1}, + {"matrix": [1, 10], "x": 10.5, "y": 1}, + {"matrix": [1, 11], "x": 11.5, "y": 1}, + {"matrix": [1, 12], "x": 12.5, "y": 1}, + {"matrix": [1, 13], "x": 13.5, "y": 1, "w": 1.5}, + {"matrix": [1, 14], "x": 15, "y": 1}, + + {"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75}, + {"matrix": [2, 1], "x": 1.75, "y": 2}, + {"matrix": [2, 2], "x": 2.75, "y": 2}, + {"matrix": [2, 3], "x": 3.75, "y": 2}, + {"matrix": [2, 4], "x": 4.75, "y": 2}, + {"matrix": [2, 5], "x": 5.75, "y": 2}, + {"matrix": [2, 6], "x": 6.75, "y": 2}, + {"matrix": [2, 7], "x": 7.75, "y": 2}, + {"matrix": [2, 8], "x": 8.75, "y": 2}, + {"matrix": [2, 9], "x": 9.75, "y": 2}, + {"matrix": [2, 10], "x": 10.75, "y": 2}, + {"matrix": [2, 11], "x": 11.75, "y": 2}, + {"matrix": [2, 12], "x": 12.75, "y": 2, "w": 2.25}, + {"matrix": [2, 14], "x": 15, "y": 2}, + + {"matrix": [3, 0], "x": 0, "y": 3, "w": 1.25}, + {"matrix": [3, 1], "x": 1.25, "y": 3}, + {"matrix": [3, 2], "x": 2.25, "y": 3}, + {"matrix": [3, 3], "x": 3.25, "y": 3}, + {"matrix": [3, 4], "x": 4.25, "y": 3}, + {"matrix": [3, 5], "x": 5.25, "y": 3}, + {"matrix": [3, 6], "x": 6.25, "y": 3}, + {"matrix": [3, 7], "x": 7.25, "y": 3}, + {"matrix": [3, 8], "x": 8.25, "y": 3}, + {"matrix": [3, 9], "x": 9.25, "y": 3}, + {"matrix": [3, 10], "x": 10.25, "y": 3}, + {"matrix": [3, 11], "x": 11.25, "y": 3}, + {"matrix": [3, 12], "x": 12.25, "y": 3, "w": 1.75}, + {"matrix": [3, 13], "x": 14, "y": 3}, + {"matrix": [3, 14], "x": 15, "y": 3}, + + {"matrix": [4, 0], "x": 0, "y": 4, "w": 1.25}, + {"matrix": [4, 1], "x": 1.25, "y": 4}, + {"matrix": [4, 2], "x": 2.25, "y": 4, "w": 1.25}, + {"matrix": [4, 3], "x": 3.5, "y": 4, "w": 6}, + {"matrix": [4, 9], "x": 9.5, "y": 4, "w": 1.25}, + {"matrix": [4, 10], "x": 10.75, "y": 4}, + {"matrix": [4, 11], "x": 11.75, "y": 4, "w": 1.25}, + {"matrix": [4, 12], "x": 13, "y": 4}, + {"matrix": [4, 13], "x": 14, "y": 4}, + {"matrix": [4, 14], "x": 15, "y": 4} ] }, "LAYOUT_65_ansi": { "layout": [ - {"label":"0,0", "x":0, "y":0}, - {"label":"0,3", "x":1, "y":0}, - {"label":"0,2", "x":2, "y":0}, - {"label":"0,1", "x":3, "y":0}, - {"label":"0,4", "x":4, "y":0}, - {"label":"0,5", "x":5, "y":0}, - {"label":"0,6", "x":6, "y":0}, - {"label":"0,7", "x":7, "y":0}, - {"label":"0,8", "x":8, "y":0}, - {"label":"0,9", "x":9, "y":0}, - {"label":"0,12", "x":10, "y":0}, - {"label":"0,11", "x":11, "y":0}, - {"label":"0,10", "x":12, "y":0}, - {"label":"0,13", "x":13, "y":0, "w":2}, - {"label":"0,14", "x":15, "y":0}, - - {"label":"1,0", "x":0, "y":1, "w":1.5}, - {"label":"1,1", "x":1.5, "y":1}, - {"label":"1,2", "x":2.5, "y":1}, - {"label":"1,3", "x":3.5, "y":1}, - {"label":"1,4", "x":4.5, "y":1}, - {"label":"1,5", "x":5.5, "y":1}, - {"label":"1,6", "x":6.5, "y":1}, - {"label":"1,7", "x":7.5, "y":1}, - {"label":"1,8", "x":8.5, "y":1}, - {"label":"1,9", "x":9.5, "y":1}, - {"label":"1,10", "x":10.5, "y":1}, - {"label":"1,11", "x":11.5, "y":1}, - {"label":"1,12", "x":12.5, "y":1}, - {"label":"1,13", "x":13.5, "y":1, "w":1.5}, - {"label":"1,14", "x":15, "y":1}, - - {"label":"2,0", "x":0, "y":2, "w":1.75}, - {"label":"2,1", "x":1.75, "y":2}, - {"label":"2,2", "x":2.75, "y":2}, - {"label":"2,3", "x":3.75, "y":2}, - {"label":"2,4", "x":4.75, "y":2}, - {"label":"2,5", "x":5.75, "y":2}, - {"label":"2,6", "x":6.75, "y":2}, - {"label":"2,7", "x":7.75, "y":2}, - {"label":"2,8", "x":8.75, "y":2}, - {"label":"2,9", "x":9.75, "y":2}, - {"label":"2,10", "x":10.75, "y":2}, - {"label":"2,11", "x":11.75, "y":2}, - {"label":"2,12", "x":12.75, "y":2, "w":2.25}, - {"label":"2,14", "x":15, "y":2}, - - {"label":"3,0", "x":0, "y":3, "w":2.25}, - {"label":"3,2", "x":2.25, "y":3}, - {"label":"3,3", "x":3.25, "y":3}, - {"label":"3,4", "x":4.25, "y":3}, - {"label":"3,5", "x":5.25, "y":3}, - {"label":"3,6", "x":6.25, "y":3}, - {"label":"3,7", "x":7.25, "y":3}, - {"label":"3,8", "x":8.25, "y":3}, - {"label":"3,9", "x":9.25, "y":3}, - {"label":"3,10", "x":10.25, "y":3}, - {"label":"3,11", "x":11.25, "y":3}, - {"label":"3,12", "x":12.25, "y":3, "w":1.75}, - {"label":"3,13", "x":14, "y":3}, - {"label":"3,14", "x":15, "y":3}, - - {"label":"4,0", "x":0, "y":4, "w":1.25}, - {"label":"4,1", "x":1.25, "y":4}, - {"label":"4,2", "x":2.25, "y":4, "w":1.25}, - {"label":"4,3", "x":3.5, "y":4, "w":6}, - {"label":"4,9", "x":9.5, "y":4, "w":1.25}, - {"label":"4,10", "x":10.75, "y":4}, - {"label":"4,11", "x":11.75, "y":4, "w":1.25}, - {"label":"4,12", "x":13, "y":4}, - {"label":"4,13", "x":14, "y":4}, - {"label":"4,14", "x":15, "y":4} + {"matrix": [0, 0], "x": 0, "y": 0}, + {"matrix": [0, 3], "x": 1, "y": 0}, + {"matrix": [0, 2], "x": 2, "y": 0}, + {"matrix": [0, 1], "x": 3, "y": 0}, + {"matrix": [0, 4], "x": 4, "y": 0}, + {"matrix": [0, 5], "x": 5, "y": 0}, + {"matrix": [0, 6], "x": 6, "y": 0}, + {"matrix": [0, 7], "x": 7, "y": 0}, + {"matrix": [0, 8], "x": 8, "y": 0}, + {"matrix": [0, 9], "x": 9, "y": 0}, + {"matrix": [0, 12], "x": 10, "y": 0}, + {"matrix": [0, 11], "x": 11, "y": 0}, + {"matrix": [0, 10], "x": 12, "y": 0}, + {"matrix": [0, 13], "x": 13, "y": 0, "w": 2}, + {"matrix": [0, 14], "x": 15, "y": 0}, + + {"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5}, + {"matrix": [1, 1], "x": 1.5, "y": 1}, + {"matrix": [1, 2], "x": 2.5, "y": 1}, + {"matrix": [1, 3], "x": 3.5, "y": 1}, + {"matrix": [1, 4], "x": 4.5, "y": 1}, + {"matrix": [1, 5], "x": 5.5, "y": 1}, + {"matrix": [1, 6], "x": 6.5, "y": 1}, + {"matrix": [1, 7], "x": 7.5, "y": 1}, + {"matrix": [1, 8], "x": 8.5, "y": 1}, + {"matrix": [1, 9], "x": 9.5, "y": 1}, + {"matrix": [1, 10], "x": 10.5, "y": 1}, + {"matrix": [1, 11], "x": 11.5, "y": 1}, + {"matrix": [1, 12], "x": 12.5, "y": 1}, + {"matrix": [1, 13], "x": 13.5, "y": 1, "w": 1.5}, + {"matrix": [1, 14], "x": 15, "y": 1}, + + {"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75}, + {"matrix": [2, 1], "x": 1.75, "y": 2}, + {"matrix": [2, 2], "x": 2.75, "y": 2}, + {"matrix": [2, 3], "x": 3.75, "y": 2}, + {"matrix": [2, 4], "x": 4.75, "y": 2}, + {"matrix": [2, 5], "x": 5.75, "y": 2}, + {"matrix": [2, 6], "x": 6.75, "y": 2}, + {"matrix": [2, 7], "x": 7.75, "y": 2}, + {"matrix": [2, 8], "x": 8.75, "y": 2}, + {"matrix": [2, 9], "x": 9.75, "y": 2}, + {"matrix": [2, 10], "x": 10.75, "y": 2}, + {"matrix": [2, 11], "x": 11.75, "y": 2}, + {"matrix": [2, 12], "x": 12.75, "y": 2, "w": 2.25}, + {"matrix": [2, 14], "x": 15, "y": 2}, + + {"matrix": [3, 0], "x": 0, "y": 3, "w": 2.25}, + {"matrix": [3, 2], "x": 2.25, "y": 3}, + {"matrix": [3, 3], "x": 3.25, "y": 3}, + {"matrix": [3, 4], "x": 4.25, "y": 3}, + {"matrix": [3, 5], "x": 5.25, "y": 3}, + {"matrix": [3, 6], "x": 6.25, "y": 3}, + {"matrix": [3, 7], "x": 7.25, "y": 3}, + {"matrix": [3, 8], "x": 8.25, "y": 3}, + {"matrix": [3, 9], "x": 9.25, "y": 3}, + {"matrix": [3, 10], "x": 10.25, "y": 3}, + {"matrix": [3, 11], "x": 11.25, "y": 3}, + {"matrix": [3, 12], "x": 12.25, "y": 3, "w": 1.75}, + {"matrix": [3, 13], "x": 14, "y": 3}, + {"matrix": [3, 14], "x": 15, "y": 3}, + + {"matrix": [4, 0], "x": 0, "y": 4, "w": 1.25}, + {"matrix": [4, 1], "x": 1.25, "y": 4}, + {"matrix": [4, 2], "x": 2.25, "y": 4, "w": 1.25}, + {"matrix": [4, 3], "x": 3.5, "y": 4, "w": 6}, + {"matrix": [4, 9], "x": 9.5, "y": 4, "w": 1.25}, + {"matrix": [4, 10], "x": 10.75, "y": 4}, + {"matrix": [4, 11], "x": 11.75, "y": 4, "w": 1.25}, + {"matrix": [4, 12], "x": 13, "y": 4}, + {"matrix": [4, 13], "x": 14, "y": 4}, + {"matrix": [4, 14], "x": 15, "y": 4} ] }, "LAYOUT_65_ansi_split_bs": { "layout": [ - {"label":"0,0", "x":0, "y":0}, - {"label":"0,3", "x":1, "y":0}, - {"label":"0,2", "x":2, "y":0}, - {"label":"0,1", "x":3, "y":0}, - {"label":"0,4", "x":4, "y":0}, - {"label":"0,5", "x":5, "y":0}, - {"label":"0,6", "x":6, "y":0}, - {"label":"0,7", "x":7, "y":0}, - {"label":"0,8", "x":8, "y":0}, - {"label":"0,9", "x":9, "y":0}, - {"label":"0,12", "x":10, "y":0}, - {"label":"0,11", "x":11, "y":0}, - {"label":"0,10", "x":12, "y":0}, - {"label":"0,13", "x":13, "y":0}, - {"label":"2,13", "x":14, "y":0}, - {"label":"0,14", "x":15, "y":0}, - - {"label":"1,0", "x":0, "y":1, "w":1.5}, - {"label":"1,1", "x":1.5, "y":1}, - {"label":"1,2", "x":2.5, "y":1}, - {"label":"1,3", "x":3.5, "y":1}, - {"label":"1,4", "x":4.5, "y":1}, - {"label":"1,5", "x":5.5, "y":1}, - {"label":"1,6", "x":6.5, "y":1}, - {"label":"1,7", "x":7.5, "y":1}, - {"label":"1,8", "x":8.5, "y":1}, - {"label":"1,9", "x":9.5, "y":1}, - {"label":"1,10", "x":10.5, "y":1}, - {"label":"1,11", "x":11.5, "y":1}, - {"label":"1,12", "x":12.5, "y":1}, - {"label":"1,13", "x":13.5, "y":1, "w":1.5}, - {"label":"1,14", "x":15, "y":1}, - - {"label":"2,0", "x":0, "y":2, "w":1.75}, - {"label":"2,1", "x":1.75, "y":2}, - {"label":"2,2", "x":2.75, "y":2}, - {"label":"2,3", "x":3.75, "y":2}, - {"label":"2,4", "x":4.75, "y":2}, - {"label":"2,5", "x":5.75, "y":2}, - {"label":"2,6", "x":6.75, "y":2}, - {"label":"2,7", "x":7.75, "y":2}, - {"label":"2,8", "x":8.75, "y":2}, - {"label":"2,9", "x":9.75, "y":2}, - {"label":"2,10", "x":10.75, "y":2}, - {"label":"2,11", "x":11.75, "y":2}, - {"label":"2,12", "x":12.75, "y":2, "w":2.25}, - {"label":"2,14", "x":15, "y":2}, - - {"label":"3,0", "x":0, "y":3, "w":2.25}, - {"label":"3,2", "x":2.25, "y":3}, - {"label":"3,3", "x":3.25, "y":3}, - {"label":"3,4", "x":4.25, "y":3}, - {"label":"3,5", "x":5.25, "y":3}, - {"label":"3,6", "x":6.25, "y":3}, - {"label":"3,7", "x":7.25, "y":3}, - {"label":"3,8", "x":8.25, "y":3}, - {"label":"3,9", "x":9.25, "y":3}, - {"label":"3,10", "x":10.25, "y":3}, - {"label":"3,11", "x":11.25, "y":3}, - {"label":"3,12", "x":12.25, "y":3, "w":1.75}, - {"label":"3,13", "x":14, "y":3}, - {"label":"3,14", "x":15, "y":3}, - - {"label":"4,0", "x":0, "y":4, "w":1.25}, - {"label":"4,1", "x":1.25, "y":4}, - {"label":"4,2", "x":2.25, "y":4, "w":1.25}, - {"label":"4,3", "x":3.5, "y":4, "w":6}, - {"label":"4,9", "x":9.5, "y":4, "w":1.25}, - {"label":"4,10", "x":10.75, "y":4}, - {"label":"4,11", "x":11.75, "y":4, "w":1.25}, - {"label":"4,12", "x":13, "y":4}, - {"label":"4,13", "x":14, "y":4}, - {"label":"4,14", "x":15, "y":4} + {"matrix": [0, 0], "x": 0, "y": 0}, + {"matrix": [0, 3], "x": 1, "y": 0}, + {"matrix": [0, 2], "x": 2, "y": 0}, + {"matrix": [0, 1], "x": 3, "y": 0}, + {"matrix": [0, 4], "x": 4, "y": 0}, + {"matrix": [0, 5], "x": 5, "y": 0}, + {"matrix": [0, 6], "x": 6, "y": 0}, + {"matrix": [0, 7], "x": 7, "y": 0}, + {"matrix": [0, 8], "x": 8, "y": 0}, + {"matrix": [0, 9], "x": 9, "y": 0}, + {"matrix": [0, 12], "x": 10, "y": 0}, + {"matrix": [0, 11], "x": 11, "y": 0}, + {"matrix": [0, 10], "x": 12, "y": 0}, + {"matrix": [0, 13], "x": 13, "y": 0}, + {"matrix": [2, 13], "x": 14, "y": 0}, + {"matrix": [0, 14], "x": 15, "y": 0}, + + {"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5}, + {"matrix": [1, 1], "x": 1.5, "y": 1}, + {"matrix": [1, 2], "x": 2.5, "y": 1}, + {"matrix": [1, 3], "x": 3.5, "y": 1}, + {"matrix": [1, 4], "x": 4.5, "y": 1}, + {"matrix": [1, 5], "x": 5.5, "y": 1}, + {"matrix": [1, 6], "x": 6.5, "y": 1}, + {"matrix": [1, 7], "x": 7.5, "y": 1}, + {"matrix": [1, 8], "x": 8.5, "y": 1}, + {"matrix": [1, 9], "x": 9.5, "y": 1}, + {"matrix": [1, 10], "x": 10.5, "y": 1}, + {"matrix": [1, 11], "x": 11.5, "y": 1}, + {"matrix": [1, 12], "x": 12.5, "y": 1}, + {"matrix": [1, 13], "x": 13.5, "y": 1, "w": 1.5}, + {"matrix": [1, 14], "x": 15, "y": 1}, + + {"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75}, + {"matrix": [2, 1], "x": 1.75, "y": 2}, + {"matrix": [2, 2], "x": 2.75, "y": 2}, + {"matrix": [2, 3], "x": 3.75, "y": 2}, + {"matrix": [2, 4], "x": 4.75, "y": 2}, + {"matrix": [2, 5], "x": 5.75, "y": 2}, + {"matrix": [2, 6], "x": 6.75, "y": 2}, + {"matrix": [2, 7], "x": 7.75, "y": 2}, + {"matrix": [2, 8], "x": 8.75, "y": 2}, + {"matrix": [2, 9], "x": 9.75, "y": 2}, + {"matrix": [2, 10], "x": 10.75, "y": 2}, + {"matrix": [2, 11], "x": 11.75, "y": 2}, + {"matrix": [2, 12], "x": 12.75, "y": 2, "w": 2.25}, + {"matrix": [2, 14], "x": 15, "y": 2}, + + {"matrix": [3, 0], "x": 0, "y": 3, "w": 2.25}, + {"matrix": [3, 2], "x": 2.25, "y": 3}, + {"matrix": [3, 3], "x": 3.25, "y": 3}, + {"matrix": [3, 4], "x": 4.25, "y": 3}, + {"matrix": [3, 5], "x": 5.25, "y": 3}, + {"matrix": [3, 6], "x": 6.25, "y": 3}, + {"matrix": [3, 7], "x": 7.25, "y": 3}, + {"matrix": [3, 8], "x": 8.25, "y": 3}, + {"matrix": [3, 9], "x": 9.25, "y": 3}, + {"matrix": [3, 10], "x": 10.25, "y": 3}, + {"matrix": [3, 11], "x": 11.25, "y": 3}, + {"matrix": [3, 12], "x": 12.25, "y": 3, "w": 1.75}, + {"matrix": [3, 13], "x": 14, "y": 3}, + {"matrix": [3, 14], "x": 15, "y": 3}, + + {"matrix": [4, 0], "x": 0, "y": 4, "w": 1.25}, + {"matrix": [4, 1], "x": 1.25, "y": 4}, + {"matrix": [4, 2], "x": 2.25, "y": 4, "w": 1.25}, + {"matrix": [4, 3], "x": 3.5, "y": 4, "w": 6}, + {"matrix": [4, 9], "x": 9.5, "y": 4, "w": 1.25}, + {"matrix": [4, 10], "x": 10.75, "y": 4}, + {"matrix": [4, 11], "x": 11.75, "y": 4, "w": 1.25}, + {"matrix": [4, 12], "x": 13, "y": 4}, + {"matrix": [4, 13], "x": 14, "y": 4}, + {"matrix": [4, 14], "x": 15, "y": 4} ] }, "LAYOUT_65_ansi_wkl": { "layout": [ - {"label":"0,0", "x":0, "y":0}, - {"label":"0,3", "x":1, "y":0}, - {"label":"0,2", "x":2, "y":0}, - {"label":"0,1", "x":3, "y":0}, - {"label":"0,4", "x":4, "y":0}, - {"label":"0,5", "x":5, "y":0}, - {"label":"0,6", "x":6, "y":0}, - {"label":"0,7", "x":7, "y":0}, - {"label":"0,8", "x":8, "y":0}, - {"label":"0,9", "x":9, "y":0}, - {"label":"0,12", "x":10, "y":0}, - {"label":"0,11", "x":11, "y":0}, - {"label":"0,10", "x":12, "y":0}, - {"label":"0,13", "x":13, "y":0, "w":2}, - {"label":"0,14", "x":15, "y":0}, - - {"label":"1,0", "x":0, "y":1, "w":1.5}, - {"label":"1,1", "x":1.5, "y":1}, - {"label":"1,2", "x":2.5, "y":1}, - {"label":"1,3", "x":3.5, "y":1}, - {"label":"1,4", "x":4.5, "y":1}, - {"label":"1,5", "x":5.5, "y":1}, - {"label":"1,6", "x":6.5, "y":1}, - {"label":"1,7", "x":7.5, "y":1}, - {"label":"1,8", "x":8.5, "y":1}, - {"label":"1,9", "x":9.5, "y":1}, - {"label":"1,10", "x":10.5, "y":1}, - {"label":"1,11", "x":11.5, "y":1}, - {"label":"1,12", "x":12.5, "y":1}, - {"label":"1,13", "x":13.5, "y":1, "w":1.5}, - {"label":"1,14", "x":15, "y":1}, - - {"label":"2,0", "x":0, "y":2, "w":1.75}, - {"label":"2,1", "x":1.75, "y":2}, - {"label":"2,2", "x":2.75, "y":2}, - {"label":"2,3", "x":3.75, "y":2}, - {"label":"2,4", "x":4.75, "y":2}, - {"label":"2,5", "x":5.75, "y":2}, - {"label":"2,6", "x":6.75, "y":2}, - {"label":"2,7", "x":7.75, "y":2}, - {"label":"2,8", "x":8.75, "y":2}, - {"label":"2,9", "x":9.75, "y":2}, - {"label":"2,10", "x":10.75, "y":2}, - {"label":"2,11", "x":11.75, "y":2}, - {"label":"2,12", "x":12.75, "y":2, "w":2.25}, - {"label":"2,14", "x":15, "y":2}, - - {"label":"3,0", "x":0, "y":3, "w":2.25}, - {"label":"3,2", "x":2.25, "y":3}, - {"label":"3,3", "x":3.25, "y":3}, - {"label":"3,4", "x":4.25, "y":3}, - {"label":"3,5", "x":5.25, "y":3}, - {"label":"3,6", "x":6.25, "y":3}, - {"label":"3,7", "x":7.25, "y":3}, - {"label":"3,8", "x":8.25, "y":3}, - {"label":"3,9", "x":9.25, "y":3}, - {"label":"3,10", "x":10.25, "y":3}, - {"label":"3,11", "x":11.25, "y":3}, - {"label":"3,12", "x":12.25, "y":3, "w":1.75}, - {"label":"3,13", "x":14, "y":3}, - {"label":"3,14", "x":15, "y":3}, - - {"label":"4,0", "x":0, "y":4, "w":1.5}, - {"label":"4,2", "x":1.5, "y":4, "w":1.5}, - {"label":"4,3", "x":3, "y":4, "w":7}, - {"label":"4,9", "x":10, "y":4, "w":1.5}, - {"label":"4,11", "x":11.5, "y":4, "w":1.5}, - {"label":"4,12", "x":13, "y":4}, - {"label":"4,13", "x":14, "y":4}, - {"label":"4,14", "x":15, "y":4} + {"matrix": [0, 0], "x": 0, "y": 0}, + {"matrix": [0, 3], "x": 1, "y": 0}, + {"matrix": [0, 2], "x": 2, "y": 0}, + {"matrix": [0, 1], "x": 3, "y": 0}, + {"matrix": [0, 4], "x": 4, "y": 0}, + {"matrix": [0, 5], "x": 5, "y": 0}, + {"matrix": [0, 6], "x": 6, "y": 0}, + {"matrix": [0, 7], "x": 7, "y": 0}, + {"matrix": [0, 8], "x": 8, "y": 0}, + {"matrix": [0, 9], "x": 9, "y": 0}, + {"matrix": [0, 12], "x": 10, "y": 0}, + {"matrix": [0, 11], "x": 11, "y": 0}, + {"matrix": [0, 10], "x": 12, "y": 0}, + {"matrix": [0, 13], "x": 13, "y": 0, "w": 2}, + {"matrix": [0, 14], "x": 15, "y": 0}, + + {"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5}, + {"matrix": [1, 1], "x": 1.5, "y": 1}, + {"matrix": [1, 2], "x": 2.5, "y": 1}, + {"matrix": [1, 3], "x": 3.5, "y": 1}, + {"matrix": [1, 4], "x": 4.5, "y": 1}, + {"matrix": [1, 5], "x": 5.5, "y": 1}, + {"matrix": [1, 6], "x": 6.5, "y": 1}, + {"matrix": [1, 7], "x": 7.5, "y": 1}, + {"matrix": [1, 8], "x": 8.5, "y": 1}, + {"matrix": [1, 9], "x": 9.5, "y": 1}, + {"matrix": [1, 10], "x": 10.5, "y": 1}, + {"matrix": [1, 11], "x": 11.5, "y": 1}, + {"matrix": [1, 12], "x": 12.5, "y": 1}, + {"matrix": [1, 13], "x": 13.5, "y": 1, "w": 1.5}, + {"matrix": [1, 14], "x": 15, "y": 1}, + + {"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75}, + {"matrix": [2, 1], "x": 1.75, "y": 2}, + {"matrix": [2, 2], "x": 2.75, "y": 2}, + {"matrix": [2, 3], "x": 3.75, "y": 2}, + {"matrix": [2, 4], "x": 4.75, "y": 2}, + {"matrix": [2, 5], "x": 5.75, "y": 2}, + {"matrix": [2, 6], "x": 6.75, "y": 2}, + {"matrix": [2, 7], "x": 7.75, "y": 2}, + {"matrix": [2, 8], "x": 8.75, "y": 2}, + {"matrix": [2, 9], "x": 9.75, "y": 2}, + {"matrix": [2, 10], "x": 10.75, "y": 2}, + {"matrix": [2, 11], "x": 11.75, "y": 2}, + {"matrix": [2, 12], "x": 12.75, "y": 2, "w": 2.25}, + {"matrix": [2, 14], "x": 15, "y": 2}, + + {"matrix": [3, 0], "x": 0, "y": 3, "w": 2.25}, + {"matrix": [3, 2], "x": 2.25, "y": 3}, + {"matrix": [3, 3], "x": 3.25, "y": 3}, + {"matrix": [3, 4], "x": 4.25, "y": 3}, + {"matrix": [3, 5], "x": 5.25, "y": 3}, + {"matrix": [3, 6], "x": 6.25, "y": 3}, + {"matrix": [3, 7], "x": 7.25, "y": 3}, + {"matrix": [3, 8], "x": 8.25, "y": 3}, + {"matrix": [3, 9], "x": 9.25, "y": 3}, + {"matrix": [3, 10], "x": 10.25, "y": 3}, + {"matrix": [3, 11], "x": 11.25, "y": 3}, + {"matrix": [3, 12], "x": 12.25, "y": 3, "w": 1.75}, + {"matrix": [3, 13], "x": 14, "y": 3}, + {"matrix": [3, 14], "x": 15, "y": 3}, + + {"matrix": [4, 0], "x": 0, "y": 4, "w": 1.5}, + {"matrix": [4, 2], "x": 1.5, "y": 4, "w": 1.5}, + {"matrix": [4, 3], "x": 3, "y": 4, "w": 7}, + {"matrix": [4, 9], "x": 10, "y": 4, "w": 1.5}, + {"matrix": [4, 11], "x": 11.5, "y": 4, "w": 1.5}, + {"matrix": [4, 12], "x": 13, "y": 4}, + {"matrix": [4, 13], "x": 14, "y": 4}, + {"matrix": [4, 14], "x": 15, "y": 4} ] }, "LAYOUT_65_ansi_wkl_split_bs": { "layout": [ - {"label":"0,0", "x":0, "y":0}, - {"label":"0,3", "x":1, "y":0}, - {"label":"0,2", "x":2, "y":0}, - {"label":"0,1", "x":3, "y":0}, - {"label":"0,4", "x":4, "y":0}, - {"label":"0,5", "x":5, "y":0}, - {"label":"0,6", "x":6, "y":0}, - {"label":"0,7", "x":7, "y":0}, - {"label":"0,8", "x":8, "y":0}, - {"label":"0,9", "x":9, "y":0}, - {"label":"0,12", "x":10, "y":0}, - {"label":"0,11", "x":11, "y":0}, - {"label":"0,10", "x":12, "y":0}, - {"label":"0,13", "x":13, "y":0}, - {"label":"2,13", "x":14, "y":0}, - {"label":"0,14", "x":15, "y":0}, - - {"label":"1,0", "x":0, "y":1, "w":1.5}, - {"label":"1,1", "x":1.5, "y":1}, - {"label":"1,2", "x":2.5, "y":1}, - {"label":"1,3", "x":3.5, "y":1}, - {"label":"1,4", "x":4.5, "y":1}, - {"label":"1,5", "x":5.5, "y":1}, - {"label":"1,6", "x":6.5, "y":1}, - {"label":"1,7", "x":7.5, "y":1}, - {"label":"1,8", "x":8.5, "y":1}, - {"label":"1,9", "x":9.5, "y":1}, - {"label":"1,10", "x":10.5, "y":1}, - {"label":"1,11", "x":11.5, "y":1}, - {"label":"1,12", "x":12.5, "y":1}, - {"label":"1,13", "x":13.5, "y":1, "w":1.5}, - {"label":"1,14", "x":15, "y":1}, - - {"label":"2,0", "x":0, "y":2, "w":1.75}, - {"label":"2,1", "x":1.75, "y":2}, - {"label":"2,2", "x":2.75, "y":2}, - {"label":"2,3", "x":3.75, "y":2}, - {"label":"2,4", "x":4.75, "y":2}, - {"label":"2,5", "x":5.75, "y":2}, - {"label":"2,6", "x":6.75, "y":2}, - {"label":"2,7", "x":7.75, "y":2}, - {"label":"2,8", "x":8.75, "y":2}, - {"label":"2,9", "x":9.75, "y":2}, - {"label":"2,10", "x":10.75, "y":2}, - {"label":"2,11", "x":11.75, "y":2}, - {"label":"2,12", "x":12.75, "y":2, "w":2.25}, - {"label":"2,14", "x":15, "y":2}, - - {"label":"3,0", "x":0, "y":3, "w":2.25}, - {"label":"3,2", "x":2.25, "y":3}, - {"label":"3,3", "x":3.25, "y":3}, - {"label":"3,4", "x":4.25, "y":3}, - {"label":"3,5", "x":5.25, "y":3}, - {"label":"3,6", "x":6.25, "y":3}, - {"label":"3,7", "x":7.25, "y":3}, - {"label":"3,8", "x":8.25, "y":3}, - {"label":"3,9", "x":9.25, "y":3}, - {"label":"3,10", "x":10.25, "y":3}, - {"label":"3,11", "x":11.25, "y":3}, - {"label":"3,12", "x":12.25, "y":3, "w":1.75}, - {"label":"3,13", "x":14, "y":3}, - {"label":"3,14", "x":15, "y":3}, - - {"label":"4,0", "x":0, "y":4, "w":1.5}, - {"label":"4,2", "x":1.5, "y":4, "w":1.5}, - {"label":"4,3", "x":3, "y":4, "w":7}, - {"label":"4,9", "x":10, "y":4, "w":1.5}, - {"label":"4,11", "x":11.5, "y":4, "w":1.5}, - {"label":"4,12", "x":13, "y":4}, - {"label":"4,13", "x":14, "y":4}, - {"label":"4,14", "x":15, "y":4} + {"matrix": [0, 0], "x": 0, "y": 0}, + {"matrix": [0, 3], "x": 1, "y": 0}, + {"matrix": [0, 2], "x": 2, "y": 0}, + {"matrix": [0, 1], "x": 3, "y": 0}, + {"matrix": [0, 4], "x": 4, "y": 0}, + {"matrix": [0, 5], "x": 5, "y": 0}, + {"matrix": [0, 6], "x": 6, "y": 0}, + {"matrix": [0, 7], "x": 7, "y": 0}, + {"matrix": [0, 8], "x": 8, "y": 0}, + {"matrix": [0, 9], "x": 9, "y": 0}, + {"matrix": [0, 12], "x": 10, "y": 0}, + {"matrix": [0, 11], "x": 11, "y": 0}, + {"matrix": [0, 10], "x": 12, "y": 0}, + {"matrix": [0, 13], "x": 13, "y": 0}, + {"matrix": [2, 13], "x": 14, "y": 0}, + {"matrix": [0, 14], "x": 15, "y": 0}, + + {"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5}, + {"matrix": [1, 1], "x": 1.5, "y": 1}, + {"matrix": [1, 2], "x": 2.5, "y": 1}, + {"matrix": [1, 3], "x": 3.5, "y": 1}, + {"matrix": [1, 4], "x": 4.5, "y": 1}, + {"matrix": [1, 5], "x": 5.5, "y": 1}, + {"matrix": [1, 6], "x": 6.5, "y": 1}, + {"matrix": [1, 7], "x": 7.5, "y": 1}, + {"matrix": [1, 8], "x": 8.5, "y": 1}, + {"matrix": [1, 9], "x": 9.5, "y": 1}, + {"matrix": [1, 10], "x": 10.5, "y": 1}, + {"matrix": [1, 11], "x": 11.5, "y": 1}, + {"matrix": [1, 12], "x": 12.5, "y": 1}, + {"matrix": [1, 13], "x": 13.5, "y": 1, "w": 1.5}, + {"matrix": [1, 14], "x": 15, "y": 1}, + + {"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75}, + {"matrix": [2, 1], "x": 1.75, "y": 2}, + {"matrix": [2, 2], "x": 2.75, "y": 2}, + {"matrix": [2, 3], "x": 3.75, "y": 2}, + {"matrix": [2, 4], "x": 4.75, "y": 2}, + {"matrix": [2, 5], "x": 5.75, "y": 2}, + {"matrix": [2, 6], "x": 6.75, "y": 2}, + {"matrix": [2, 7], "x": 7.75, "y": 2}, + {"matrix": [2, 8], "x": 8.75, "y": 2}, + {"matrix": [2, 9], "x": 9.75, "y": 2}, + {"matrix": [2, 10], "x": 10.75, "y": 2}, + {"matrix": [2, 11], "x": 11.75, "y": 2}, + {"matrix": [2, 12], "x": 12.75, "y": 2, "w": 2.25}, + {"matrix": [2, 14], "x": 15, "y": 2}, + + {"matrix": [3, 0], "x": 0, "y": 3, "w": 2.25}, + {"matrix": [3, 2], "x": 2.25, "y": 3}, + {"matrix": [3, 3], "x": 3.25, "y": 3}, + {"matrix": [3, 4], "x": 4.25, "y": 3}, + {"matrix": [3, 5], "x": 5.25, "y": 3}, + {"matrix": [3, 6], "x": 6.25, "y": 3}, + {"matrix": [3, 7], "x": 7.25, "y": 3}, + {"matrix": [3, 8], "x": 8.25, "y": 3}, + {"matrix": [3, 9], "x": 9.25, "y": 3}, + {"matrix": [3, 10], "x": 10.25, "y": 3}, + {"matrix": [3, 11], "x": 11.25, "y": 3}, + {"matrix": [3, 12], "x": 12.25, "y": 3, "w": 1.75}, + {"matrix": [3, 13], "x": 14, "y": 3}, + {"matrix": [3, 14], "x": 15, "y": 3}, + + {"matrix": [4, 0], "x": 0, "y": 4, "w": 1.5}, + {"matrix": [4, 2], "x": 1.5, "y": 4, "w": 1.5}, + {"matrix": [4, 3], "x": 3, "y": 4, "w": 7}, + {"matrix": [4, 9], "x": 10, "y": 4, "w": 1.5}, + {"matrix": [4, 11], "x": 11.5, "y": 4, "w": 1.5}, + {"matrix": [4, 12], "x": 13, "y": 4}, + {"matrix": [4, 13], "x": 14, "y": 4}, + {"matrix": [4, 14], "x": 15, "y": 4} ] }, "LAYOUT_65_iso": { "layout": [ - {"label":"0,0", "x":0, "y":0}, - {"label":"0,3", "x":1, "y":0}, - {"label":"0,2", "x":2, "y":0}, - {"label":"0,1", "x":3, "y":0}, - {"label":"0,4", "x":4, "y":0}, - {"label":"0,5", "x":5, "y":0}, - {"label":"0,6", "x":6, "y":0}, - {"label":"0,7", "x":7, "y":0}, - {"label":"0,8", "x":8, "y":0}, - {"label":"0,9", "x":9, "y":0}, - {"label":"0,12", "x":10, "y":0}, - {"label":"0,11", "x":11, "y":0}, - {"label":"0,10", "x":12, "y":0}, - {"label":"0,13", "x":13, "y":0, "w":2}, - {"label":"0,14", "x":15, "y":0}, - - {"label":"1,0", "x":0, "y":1, "w":1.5}, - {"label":"1,1", "x":1.5, "y":1}, - {"label":"1,2", "x":2.5, "y":1}, - {"label":"1,3", "x":3.5, "y":1}, - {"label":"1,4", "x":4.5, "y":1}, - {"label":"1,5", "x":5.5, "y":1}, - {"label":"1,6", "x":6.5, "y":1}, - {"label":"1,7", "x":7.5, "y":1}, - {"label":"1,8", "x":8.5, "y":1}, - {"label":"1,9", "x":9.5, "y":1}, - {"label":"1,10", "x":10.5, "y":1}, - {"label":"1,11", "x":11.5, "y":1}, - {"label":"1,12", "x":12.5, "y":1}, - {"label":"1,14", "x":15, "y":1}, - - {"label":"2,0", "x":0, "y":2, "w":1.75}, - {"label":"2,1", "x":1.75, "y":2}, - {"label":"2,2", "x":2.75, "y":2}, - {"label":"2,3", "x":3.75, "y":2}, - {"label":"2,4", "x":4.75, "y":2}, - {"label":"2,5", "x":5.75, "y":2}, - {"label":"2,6", "x":6.75, "y":2}, - {"label":"2,7", "x":7.75, "y":2}, - {"label":"2,8", "x":8.75, "y":2}, - {"label":"2,9", "x":9.75, "y":2}, - {"label":"2,10", "x":10.75, "y":2}, - {"label":"2,11", "x":11.75, "y":2}, - {"label":"2,12", "x":12.75, "y":2}, - {"label":"1,13", "x":13.75, "y":1, "w":1.25, "h":2}, - {"label":"2,14", "x":15, "y":2}, - - {"label":"3,0", "x":0, "y":3, "w":1.25}, - {"label":"3,1", "x":1.25, "y":3}, - {"label":"3,2", "x":2.25, "y":3}, - {"label":"3,3", "x":3.25, "y":3}, - {"label":"3,4", "x":4.25, "y":3}, - {"label":"3,5", "x":5.25, "y":3}, - {"label":"3,6", "x":6.25, "y":3}, - {"label":"3,7", "x":7.25, "y":3}, - {"label":"3,8", "x":8.25, "y":3}, - {"label":"3,9", "x":9.25, "y":3}, - {"label":"3,10", "x":10.25, "y":3}, - {"label":"3,11", "x":11.25, "y":3}, - {"label":"3,12", "x":12.25, "y":3, "w":1.75}, - {"label":"3,13", "x":14, "y":3}, - {"label":"3,14", "x":15, "y":3}, - - {"label":"4,0", "x":0, "y":4, "w":1.25}, - {"label":"4,1", "x":1.25, "y":4}, - {"label":"4,2", "x":2.25, "y":4, "w":1.25}, - {"label":"4,3", "x":3.5, "y":4, "w":6}, - {"label":"4,9", "x":9.5, "y":4, "w":1.25}, - {"label":"4,10", "x":10.75, "y":4}, - {"label":"4,11", "x":11.75, "y":4, "w":1.25}, - {"label":"4,12", "x":13, "y":4}, - {"label":"4,13", "x":14, "y":4}, - {"label":"4,14", "x":15, "y":4} + {"matrix": [0, 0], "x": 0, "y": 0}, + {"matrix": [0, 3], "x": 1, "y": 0}, + {"matrix": [0, 2], "x": 2, "y": 0}, + {"matrix": [0, 1], "x": 3, "y": 0}, + {"matrix": [0, 4], "x": 4, "y": 0}, + {"matrix": [0, 5], "x": 5, "y": 0}, + {"matrix": [0, 6], "x": 6, "y": 0}, + {"matrix": [0, 7], "x": 7, "y": 0}, + {"matrix": [0, 8], "x": 8, "y": 0}, + {"matrix": [0, 9], "x": 9, "y": 0}, + {"matrix": [0, 12], "x": 10, "y": 0}, + {"matrix": [0, 11], "x": 11, "y": 0}, + {"matrix": [0, 10], "x": 12, "y": 0}, + {"matrix": [0, 13], "x": 13, "y": 0, "w": 2}, + {"matrix": [0, 14], "x": 15, "y": 0}, + + {"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5}, + {"matrix": [1, 1], "x": 1.5, "y": 1}, + {"matrix": [1, 2], "x": 2.5, "y": 1}, + {"matrix": [1, 3], "x": 3.5, "y": 1}, + {"matrix": [1, 4], "x": 4.5, "y": 1}, + {"matrix": [1, 5], "x": 5.5, "y": 1}, + {"matrix": [1, 6], "x": 6.5, "y": 1}, + {"matrix": [1, 7], "x": 7.5, "y": 1}, + {"matrix": [1, 8], "x": 8.5, "y": 1}, + {"matrix": [1, 9], "x": 9.5, "y": 1}, + {"matrix": [1, 10], "x": 10.5, "y": 1}, + {"matrix": [1, 11], "x": 11.5, "y": 1}, + {"matrix": [1, 12], "x": 12.5, "y": 1}, + {"matrix": [1, 14], "x": 15, "y": 1}, + + {"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75}, + {"matrix": [2, 1], "x": 1.75, "y": 2}, + {"matrix": [2, 2], "x": 2.75, "y": 2}, + {"matrix": [2, 3], "x": 3.75, "y": 2}, + {"matrix": [2, 4], "x": 4.75, "y": 2}, + {"matrix": [2, 5], "x": 5.75, "y": 2}, + {"matrix": [2, 6], "x": 6.75, "y": 2}, + {"matrix": [2, 7], "x": 7.75, "y": 2}, + {"matrix": [2, 8], "x": 8.75, "y": 2}, + {"matrix": [2, 9], "x": 9.75, "y": 2}, + {"matrix": [2, 10], "x": 10.75, "y": 2}, + {"matrix": [2, 11], "x": 11.75, "y": 2}, + {"matrix": [2, 12], "x": 12.75, "y": 2}, + {"matrix": [1, 13], "x": 13.75, "y": 1, "w": 1.25, "h": 2}, + {"matrix": [2, 14], "x": 15, "y": 2}, + + {"matrix": [3, 0], "x": 0, "y": 3, "w": 1.25}, + {"matrix": [3, 1], "x": 1.25, "y": 3}, + {"matrix": [3, 2], "x": 2.25, "y": 3}, + {"matrix": [3, 3], "x": 3.25, "y": 3}, + {"matrix": [3, 4], "x": 4.25, "y": 3}, + {"matrix": [3, 5], "x": 5.25, "y": 3}, + {"matrix": [3, 6], "x": 6.25, "y": 3}, + {"matrix": [3, 7], "x": 7.25, "y": 3}, + {"matrix": [3, 8], "x": 8.25, "y": 3}, + {"matrix": [3, 9], "x": 9.25, "y": 3}, + {"matrix": [3, 10], "x": 10.25, "y": 3}, + {"matrix": [3, 11], "x": 11.25, "y": 3}, + {"matrix": [3, 12], "x": 12.25, "y": 3, "w": 1.75}, + {"matrix": [3, 13], "x": 14, "y": 3}, + {"matrix": [3, 14], "x": 15, "y": 3}, + + {"matrix": [4, 0], "x": 0, "y": 4, "w": 1.25}, + {"matrix": [4, 1], "x": 1.25, "y": 4}, + {"matrix": [4, 2], "x": 2.25, "y": 4, "w": 1.25}, + {"matrix": [4, 3], "x": 3.5, "y": 4, "w": 6}, + {"matrix": [4, 9], "x": 9.5, "y": 4, "w": 1.25}, + {"matrix": [4, 10], "x": 10.75, "y": 4}, + {"matrix": [4, 11], "x": 11.75, "y": 4, "w": 1.25}, + {"matrix": [4, 12], "x": 13, "y": 4}, + {"matrix": [4, 13], "x": 14, "y": 4}, + {"matrix": [4, 14], "x": 15, "y": 4} ] }, "LAYOUT_65_iso_split_bs": { "layout": [ - {"label":"0,0", "x":0, "y":0}, - {"label":"0,3", "x":1, "y":0}, - {"label":"0,2", "x":2, "y":0}, - {"label":"0,1", "x":3, "y":0}, - {"label":"0,4", "x":4, "y":0}, - {"label":"0,5", "x":5, "y":0}, - {"label":"0,6", "x":6, "y":0}, - {"label":"0,7", "x":7, "y":0}, - {"label":"0,8", "x":8, "y":0}, - {"label":"0,9", "x":9, "y":0}, - {"label":"0,12", "x":10, "y":0}, - {"label":"0,11", "x":11, "y":0}, - {"label":"0,10", "x":12, "y":0}, - {"label":"0,13", "x":13, "y":0}, - {"label":"2,13", "x":14, "y":0}, - {"label":"0,14", "x":15, "y":0}, - - {"label":"1,0", "x":0, "y":1, "w":1.5}, - {"label":"1,1", "x":1.5, "y":1}, - {"label":"1,2", "x":2.5, "y":1}, - {"label":"1,3", "x":3.5, "y":1}, - {"label":"1,4", "x":4.5, "y":1}, - {"label":"1,5", "x":5.5, "y":1}, - {"label":"1,6", "x":6.5, "y":1}, - {"label":"1,7", "x":7.5, "y":1}, - {"label":"1,8", "x":8.5, "y":1}, - {"label":"1,9", "x":9.5, "y":1}, - {"label":"1,10", "x":10.5, "y":1}, - {"label":"1,11", "x":11.5, "y":1}, - {"label":"1,12", "x":12.5, "y":1}, - {"label":"1,14", "x":15, "y":1}, - - {"label":"2,0", "x":0, "y":2, "w":1.75}, - {"label":"2,1", "x":1.75, "y":2}, - {"label":"2,2", "x":2.75, "y":2}, - {"label":"2,3", "x":3.75, "y":2}, - {"label":"2,4", "x":4.75, "y":2}, - {"label":"2,5", "x":5.75, "y":2}, - {"label":"2,6", "x":6.75, "y":2}, - {"label":"2,7", "x":7.75, "y":2}, - {"label":"2,8", "x":8.75, "y":2}, - {"label":"2,9", "x":9.75, "y":2}, - {"label":"2,10", "x":10.75, "y":2}, - {"label":"2,11", "x":11.75, "y":2}, - {"label":"2,12", "x":12.75, "y":2}, - {"label":"1,13", "x":13.75, "y":1, "w":1.25, "h":2}, - {"label":"2,14", "x":15, "y":2}, - - {"label":"3,0", "x":0, "y":3, "w":1.25}, - {"label":"3,1", "x":1.25, "y":3}, - {"label":"3,2", "x":2.25, "y":3}, - {"label":"3,3", "x":3.25, "y":3}, - {"label":"3,4", "x":4.25, "y":3}, - {"label":"3,5", "x":5.25, "y":3}, - {"label":"3,6", "x":6.25, "y":3}, - {"label":"3,7", "x":7.25, "y":3}, - {"label":"3,8", "x":8.25, "y":3}, - {"label":"3,9", "x":9.25, "y":3}, - {"label":"3,10", "x":10.25, "y":3}, - {"label":"3,11", "x":11.25, "y":3}, - {"label":"3,12", "x":12.25, "y":3, "w":1.75}, - {"label":"3,13", "x":14, "y":3}, - {"label":"3,14", "x":15, "y":3}, - - {"label":"4,0", "x":0, "y":4, "w":1.25}, - {"label":"4,1", "x":1.25, "y":4}, - {"label":"4,2", "x":2.25, "y":4, "w":1.25}, - {"label":"4,3", "x":3.5, "y":4, "w":6}, - {"label":"4,9", "x":9.5, "y":4, "w":1.25}, - {"label":"4,10", "x":10.75, "y":4}, - {"label":"4,11", "x":11.75, "y":4, "w":1.25}, - {"label":"4,12", "x":13, "y":4}, - {"label":"4,13", "x":14, "y":4}, - {"label":"4,14", "x":15, "y":4} + {"matrix": [0, 0], "x": 0, "y": 0}, + {"matrix": [0, 3], "x": 1, "y": 0}, + {"matrix": [0, 2], "x": 2, "y": 0}, + {"matrix": [0, 1], "x": 3, "y": 0}, + {"matrix": [0, 4], "x": 4, "y": 0}, + {"matrix": [0, 5], "x": 5, "y": 0}, + {"matrix": [0, 6], "x": 6, "y": 0}, + {"matrix": [0, 7], "x": 7, "y": 0}, + {"matrix": [0, 8], "x": 8, "y": 0}, + {"matrix": [0, 9], "x": 9, "y": 0}, + {"matrix": [0, 12], "x": 10, "y": 0}, + {"matrix": [0, 11], "x": 11, "y": 0}, + {"matrix": [0, 10], "x": 12, "y": 0}, + {"matrix": [0, 13], "x": 13, "y": 0}, + {"matrix": [2, 13], "x": 14, "y": 0}, + {"matrix": [0, 14], "x": 15, "y": 0}, + + {"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5}, + {"matrix": [1, 1], "x": 1.5, "y": 1}, + {"matrix": [1, 2], "x": 2.5, "y": 1}, + {"matrix": [1, 3], "x": 3.5, "y": 1}, + {"matrix": [1, 4], "x": 4.5, "y": 1}, + {"matrix": [1, 5], "x": 5.5, "y": 1}, + {"matrix": [1, 6], "x": 6.5, "y": 1}, + {"matrix": [1, 7], "x": 7.5, "y": 1}, + {"matrix": [1, 8], "x": 8.5, "y": 1}, + {"matrix": [1, 9], "x": 9.5, "y": 1}, + {"matrix": [1, 10], "x": 10.5, "y": 1}, + {"matrix": [1, 11], "x": 11.5, "y": 1}, + {"matrix": [1, 12], "x": 12.5, "y": 1}, + {"matrix": [1, 14], "x": 15, "y": 1}, + + {"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75}, + {"matrix": [2, 1], "x": 1.75, "y": 2}, + {"matrix": [2, 2], "x": 2.75, "y": 2}, + {"matrix": [2, 3], "x": 3.75, "y": 2}, + {"matrix": [2, 4], "x": 4.75, "y": 2}, + {"matrix": [2, 5], "x": 5.75, "y": 2}, + {"matrix": [2, 6], "x": 6.75, "y": 2}, + {"matrix": [2, 7], "x": 7.75, "y": 2}, + {"matrix": [2, 8], "x": 8.75, "y": 2}, + {"matrix": [2, 9], "x": 9.75, "y": 2}, + {"matrix": [2, 10], "x": 10.75, "y": 2}, + {"matrix": [2, 11], "x": 11.75, "y": 2}, + {"matrix": [2, 12], "x": 12.75, "y": 2}, + {"matrix": [1, 13], "x": 13.75, "y": 1, "w": 1.25, "h": 2}, + {"matrix": [2, 14], "x": 15, "y": 2}, + + {"matrix": [3, 0], "x": 0, "y": 3, "w": 1.25}, + {"matrix": [3, 1], "x": 1.25, "y": 3}, + {"matrix": [3, 2], "x": 2.25, "y": 3}, + {"matrix": [3, 3], "x": 3.25, "y": 3}, + {"matrix": [3, 4], "x": 4.25, "y": 3}, + {"matrix": [3, 5], "x": 5.25, "y": 3}, + {"matrix": [3, 6], "x": 6.25, "y": 3}, + {"matrix": [3, 7], "x": 7.25, "y": 3}, + {"matrix": [3, 8], "x": 8.25, "y": 3}, + {"matrix": [3, 9], "x": 9.25, "y": 3}, + {"matrix": [3, 10], "x": 10.25, "y": 3}, + {"matrix": [3, 11], "x": 11.25, "y": 3}, + {"matrix": [3, 12], "x": 12.25, "y": 3, "w": 1.75}, + {"matrix": [3, 13], "x": 14, "y": 3}, + {"matrix": [3, 14], "x": 15, "y": 3}, + + {"matrix": [4, 0], "x": 0, "y": 4, "w": 1.25}, + {"matrix": [4, 1], "x": 1.25, "y": 4}, + {"matrix": [4, 2], "x": 2.25, "y": 4, "w": 1.25}, + {"matrix": [4, 3], "x": 3.5, "y": 4, "w": 6}, + {"matrix": [4, 9], "x": 9.5, "y": 4, "w": 1.25}, + {"matrix": [4, 10], "x": 10.75, "y": 4}, + {"matrix": [4, 11], "x": 11.75, "y": 4, "w": 1.25}, + {"matrix": [4, 12], "x": 13, "y": 4}, + {"matrix": [4, 13], "x": 14, "y": 4}, + {"matrix": [4, 14], "x": 15, "y": 4} ] }, "LAYOUT_65_iso_wkl": { "layout": [ - {"label":"0,0", "x":0, "y":0}, - {"label":"0,3", "x":1, "y":0}, - {"label":"0,2", "x":2, "y":0}, - {"label":"0,1", "x":3, "y":0}, - {"label":"0,4", "x":4, "y":0}, - {"label":"0,5", "x":5, "y":0}, - {"label":"0,6", "x":6, "y":0}, - {"label":"0,7", "x":7, "y":0}, - {"label":"0,8", "x":8, "y":0}, - {"label":"0,9", "x":9, "y":0}, - {"label":"0,12", "x":10, "y":0}, - {"label":"0,11", "x":11, "y":0}, - {"label":"0,10", "x":12, "y":0}, - {"label":"0,13", "x":13, "y":0, "w":2}, - {"label":"0,14", "x":15, "y":0}, - - {"label":"1,0", "x":0, "y":1, "w":1.5}, - {"label":"1,1", "x":1.5, "y":1}, - {"label":"1,2", "x":2.5, "y":1}, - {"label":"1,3", "x":3.5, "y":1}, - {"label":"1,4", "x":4.5, "y":1}, - {"label":"1,5", "x":5.5, "y":1}, - {"label":"1,6", "x":6.5, "y":1}, - {"label":"1,7", "x":7.5, "y":1}, - {"label":"1,8", "x":8.5, "y":1}, - {"label":"1,9", "x":9.5, "y":1}, - {"label":"1,10", "x":10.5, "y":1}, - {"label":"1,11", "x":11.5, "y":1}, - {"label":"1,12", "x":12.5, "y":1}, - {"label":"1,14", "x":15, "y":1}, - - {"label":"2,0", "x":0, "y":2, "w":1.75}, - {"label":"2,1", "x":1.75, "y":2}, - {"label":"2,2", "x":2.75, "y":2}, - {"label":"2,3", "x":3.75, "y":2}, - {"label":"2,4", "x":4.75, "y":2}, - {"label":"2,5", "x":5.75, "y":2}, - {"label":"2,6", "x":6.75, "y":2}, - {"label":"2,7", "x":7.75, "y":2}, - {"label":"2,8", "x":8.75, "y":2}, - {"label":"2,9", "x":9.75, "y":2}, - {"label":"2,10", "x":10.75, "y":2}, - {"label":"2,11", "x":11.75, "y":2}, - {"label":"2,12", "x":12.75, "y":2}, - {"label":"1,13", "x":13.75, "y":1, "w":1.25, "h":2}, - {"label":"2,14", "x":15, "y":2}, - - {"label":"3,0", "x":0, "y":3, "w":1.25}, - {"label":"3,1", "x":1.25, "y":3}, - {"label":"3,2", "x":2.25, "y":3}, - {"label":"3,3", "x":3.25, "y":3}, - {"label":"3,4", "x":4.25, "y":3}, - {"label":"3,5", "x":5.25, "y":3}, - {"label":"3,6", "x":6.25, "y":3}, - {"label":"3,7", "x":7.25, "y":3}, - {"label":"3,8", "x":8.25, "y":3}, - {"label":"3,9", "x":9.25, "y":3}, - {"label":"3,10", "x":10.25, "y":3}, - {"label":"3,11", "x":11.25, "y":3}, - {"label":"3,12", "x":12.25, "y":3, "w":1.75}, - {"label":"3,13", "x":14, "y":3}, - {"label":"3,14", "x":15, "y":3}, - - {"label":"4,0", "x":0, "y":4, "w":1.5}, - {"label":"4,2", "x":1.5, "y":4, "w":1.5}, - {"label":"4,3", "x":3, "y":4, "w":7}, - {"label":"4,9", "x":10, "y":4, "w":1.5}, - {"label":"4,11", "x":11.5, "y":4, "w":1.5}, - {"label":"4,12", "x":13, "y":4}, - {"label":"4,13", "x":14, "y":4}, - {"label":"4,14", "x":15, "y":4} + {"matrix": [0, 0], "x": 0, "y": 0}, + {"matrix": [0, 3], "x": 1, "y": 0}, + {"matrix": [0, 2], "x": 2, "y": 0}, + {"matrix": [0, 1], "x": 3, "y": 0}, + {"matrix": [0, 4], "x": 4, "y": 0}, + {"matrix": [0, 5], "x": 5, "y": 0}, + {"matrix": [0, 6], "x": 6, "y": 0}, + {"matrix": [0, 7], "x": 7, "y": 0}, + {"matrix": [0, 8], "x": 8, "y": 0}, + {"matrix": [0, 9], "x": 9, "y": 0}, + {"matrix": [0, 12], "x": 10, "y": 0}, + {"matrix": [0, 11], "x": 11, "y": 0}, + {"matrix": [0, 10], "x": 12, "y": 0}, + {"matrix": [0, 13], "x": 13, "y": 0, "w": 2}, + {"matrix": [0, 14], "x": 15, "y": 0}, + + {"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5}, + {"matrix": [1, 1], "x": 1.5, "y": 1}, + {"matrix": [1, 2], "x": 2.5, "y": 1}, + {"matrix": [1, 3], "x": 3.5, "y": 1}, + {"matrix": [1, 4], "x": 4.5, "y": 1}, + {"matrix": [1, 5], "x": 5.5, "y": 1}, + {"matrix": [1, 6], "x": 6.5, "y": 1}, + {"matrix": [1, 7], "x": 7.5, "y": 1}, + {"matrix": [1, 8], "x": 8.5, "y": 1}, + {"matrix": [1, 9], "x": 9.5, "y": 1}, + {"matrix": [1, 10], "x": 10.5, "y": 1}, + {"matrix": [1, 11], "x": 11.5, "y": 1}, + {"matrix": [1, 12], "x": 12.5, "y": 1}, + {"matrix": [1, 14], "x": 15, "y": 1}, + + {"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75}, + {"matrix": [2, 1], "x": 1.75, "y": 2}, + {"matrix": [2, 2], "x": 2.75, "y": 2}, + {"matrix": [2, 3], "x": 3.75, "y": 2}, + {"matrix": [2, 4], "x": 4.75, "y": 2}, + {"matrix": [2, 5], "x": 5.75, "y": 2}, + {"matrix": [2, 6], "x": 6.75, "y": 2}, + {"matrix": [2, 7], "x": 7.75, "y": 2}, + {"matrix": [2, 8], "x": 8.75, "y": 2}, + {"matrix": [2, 9], "x": 9.75, "y": 2}, + {"matrix": [2, 10], "x": 10.75, "y": 2}, + {"matrix": [2, 11], "x": 11.75, "y": 2}, + {"matrix": [2, 12], "x": 12.75, "y": 2}, + {"matrix": [1, 13], "x": 13.75, "y": 1, "w": 1.25, "h": 2}, + {"matrix": [2, 14], "x": 15, "y": 2}, + + {"matrix": [3, 0], "x": 0, "y": 3, "w": 1.25}, + {"matrix": [3, 1], "x": 1.25, "y": 3}, + {"matrix": [3, 2], "x": 2.25, "y": 3}, + {"matrix": [3, 3], "x": 3.25, "y": 3}, + {"matrix": [3, 4], "x": 4.25, "y": 3}, + {"matrix": [3, 5], "x": 5.25, "y": 3}, + {"matrix": [3, 6], "x": 6.25, "y": 3}, + {"matrix": [3, 7], "x": 7.25, "y": 3}, + {"matrix": [3, 8], "x": 8.25, "y": 3}, + {"matrix": [3, 9], "x": 9.25, "y": 3}, + {"matrix": [3, 10], "x": 10.25, "y": 3}, + {"matrix": [3, 11], "x": 11.25, "y": 3}, + {"matrix": [3, 12], "x": 12.25, "y": 3, "w": 1.75}, + {"matrix": [3, 13], "x": 14, "y": 3}, + {"matrix": [3, 14], "x": 15, "y": 3}, + + {"matrix": [4, 0], "x": 0, "y": 4, "w": 1.5}, + {"matrix": [4, 2], "x": 1.5, "y": 4, "w": 1.5}, + {"matrix": [4, 3], "x": 3, "y": 4, "w": 7}, + {"matrix": [4, 9], "x": 10, "y": 4, "w": 1.5}, + {"matrix": [4, 11], "x": 11.5, "y": 4, "w": 1.5}, + {"matrix": [4, 12], "x": 13, "y": 4}, + {"matrix": [4, 13], "x": 14, "y": 4}, + {"matrix": [4, 14], "x": 15, "y": 4} ] }, "LAYOUT_65_iso_wkl_split_bs": { "layout": [ - {"label":"0,0", "x":0, "y":0}, - {"label":"0,3", "x":1, "y":0}, - {"label":"0,2", "x":2, "y":0}, - {"label":"0,1", "x":3, "y":0}, - {"label":"0,4", "x":4, "y":0}, - {"label":"0,5", "x":5, "y":0}, - {"label":"0,6", "x":6, "y":0}, - {"label":"0,7", "x":7, "y":0}, - {"label":"0,8", "x":8, "y":0}, - {"label":"0,9", "x":9, "y":0}, - {"label":"0,12", "x":10, "y":0}, - {"label":"0,11", "x":11, "y":0}, - {"label":"0,10", "x":12, "y":0}, - {"label":"0,13", "x":13, "y":0}, - {"label":"2,13", "x":14, "y":0}, - {"label":"0,14", "x":15, "y":0}, - - {"label":"1,0", "x":0, "y":1, "w":1.5}, - {"label":"1,1", "x":1.5, "y":1}, - {"label":"1,2", "x":2.5, "y":1}, - {"label":"1,3", "x":3.5, "y":1}, - {"label":"1,4", "x":4.5, "y":1}, - {"label":"1,5", "x":5.5, "y":1}, - {"label":"1,6", "x":6.5, "y":1}, - {"label":"1,7", "x":7.5, "y":1}, - {"label":"1,8", "x":8.5, "y":1}, - {"label":"1,9", "x":9.5, "y":1}, - {"label":"1,10", "x":10.5, "y":1}, - {"label":"1,11", "x":11.5, "y":1}, - {"label":"1,12", "x":12.5, "y":1}, - {"label":"1,14", "x":15, "y":1}, - - {"label":"2,0", "x":0, "y":2, "w":1.75}, - {"label":"2,1", "x":1.75, "y":2}, - {"label":"2,2", "x":2.75, "y":2}, - {"label":"2,3", "x":3.75, "y":2}, - {"label":"2,4", "x":4.75, "y":2}, - {"label":"2,5", "x":5.75, "y":2}, - {"label":"2,6", "x":6.75, "y":2}, - {"label":"2,7", "x":7.75, "y":2}, - {"label":"2,8", "x":8.75, "y":2}, - {"label":"2,9", "x":9.75, "y":2}, - {"label":"2,10", "x":10.75, "y":2}, - {"label":"2,11", "x":11.75, "y":2}, - {"label":"2,12", "x":12.75, "y":2}, - {"label":"1,13", "x":13.75, "y":1, "w":1.25, "h":2}, - {"label":"2,14", "x":15, "y":2}, - - {"label":"3,0", "x":0, "y":3, "w":1.25}, - {"label":"3,1", "x":1.25, "y":3}, - {"label":"3,2", "x":2.25, "y":3}, - {"label":"3,3", "x":3.25, "y":3}, - {"label":"3,4", "x":4.25, "y":3}, - {"label":"3,5", "x":5.25, "y":3}, - {"label":"3,6", "x":6.25, "y":3}, - {"label":"3,7", "x":7.25, "y":3}, - {"label":"3,8", "x":8.25, "y":3}, - {"label":"3,9", "x":9.25, "y":3}, - {"label":"3,10", "x":10.25, "y":3}, - {"label":"3,11", "x":11.25, "y":3}, - {"label":"3,12", "x":12.25, "y":3, "w":1.75}, - {"label":"3,13", "x":14, "y":3}, - {"label":"3,14", "x":15, "y":3}, - - {"label":"4,0", "x":0, "y":4, "w":1.5}, - {"label":"4,2", "x":1.5, "y":4, "w":1.5}, - {"label":"4,3", "x":3, "y":4, "w":7}, - {"label":"4,9", "x":10, "y":4, "w":1.5}, - {"label":"4,11", "x":11.5, "y":4, "w":1.5}, - {"label":"4,12", "x":13, "y":4}, - {"label":"4,13", "x":14, "y":4}, - {"label":"4,14", "x":15, "y":4} + {"matrix": [0, 0], "x": 0, "y": 0}, + {"matrix": [0, 3], "x": 1, "y": 0}, + {"matrix": [0, 2], "x": 2, "y": 0}, + {"matrix": [0, 1], "x": 3, "y": 0}, + {"matrix": [0, 4], "x": 4, "y": 0}, + {"matrix": [0, 5], "x": 5, "y": 0}, + {"matrix": [0, 6], "x": 6, "y": 0}, + {"matrix": [0, 7], "x": 7, "y": 0}, + {"matrix": [0, 8], "x": 8, "y": 0}, + {"matrix": [0, 9], "x": 9, "y": 0}, + {"matrix": [0, 12], "x": 10, "y": 0}, + {"matrix": [0, 11], "x": 11, "y": 0}, + {"matrix": [0, 10], "x": 12, "y": 0}, + {"matrix": [0, 13], "x": 13, "y": 0}, + {"matrix": [2, 13], "x": 14, "y": 0}, + {"matrix": [0, 14], "x": 15, "y": 0}, + + {"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5}, + {"matrix": [1, 1], "x": 1.5, "y": 1}, + {"matrix": [1, 2], "x": 2.5, "y": 1}, + {"matrix": [1, 3], "x": 3.5, "y": 1}, + {"matrix": [1, 4], "x": 4.5, "y": 1}, + {"matrix": [1, 5], "x": 5.5, "y": 1}, + {"matrix": [1, 6], "x": 6.5, "y": 1}, + {"matrix": [1, 7], "x": 7.5, "y": 1}, + {"matrix": [1, 8], "x": 8.5, "y": 1}, + {"matrix": [1, 9], "x": 9.5, "y": 1}, + {"matrix": [1, 10], "x": 10.5, "y": 1}, + {"matrix": [1, 11], "x": 11.5, "y": 1}, + {"matrix": [1, 12], "x": 12.5, "y": 1}, + {"matrix": [1, 14], "x": 15, "y": 1}, + + {"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75}, + {"matrix": [2, 1], "x": 1.75, "y": 2}, + {"matrix": [2, 2], "x": 2.75, "y": 2}, + {"matrix": [2, 3], "x": 3.75, "y": 2}, + {"matrix": [2, 4], "x": 4.75, "y": 2}, + {"matrix": [2, 5], "x": 5.75, "y": 2}, + {"matrix": [2, 6], "x": 6.75, "y": 2}, + {"matrix": [2, 7], "x": 7.75, "y": 2}, + {"matrix": [2, 8], "x": 8.75, "y": 2}, + {"matrix": [2, 9], "x": 9.75, "y": 2}, + {"matrix": [2, 10], "x": 10.75, "y": 2}, + {"matrix": [2, 11], "x": 11.75, "y": 2}, + {"matrix": [2, 12], "x": 12.75, "y": 2}, + {"matrix": [1, 13], "x": 13.75, "y": 1, "w": 1.25, "h": 2}, + {"matrix": [2, 14], "x": 15, "y": 2}, + + {"matrix": [3, 0], "x": 0, "y": 3, "w": 1.25}, + {"matrix": [3, 1], "x": 1.25, "y": 3}, + {"matrix": [3, 2], "x": 2.25, "y": 3}, + {"matrix": [3, 3], "x": 3.25, "y": 3}, + {"matrix": [3, 4], "x": 4.25, "y": 3}, + {"matrix": [3, 5], "x": 5.25, "y": 3}, + {"matrix": [3, 6], "x": 6.25, "y": 3}, + {"matrix": [3, 7], "x": 7.25, "y": 3}, + {"matrix": [3, 8], "x": 8.25, "y": 3}, + {"matrix": [3, 9], "x": 9.25, "y": 3}, + {"matrix": [3, 10], "x": 10.25, "y": 3}, + {"matrix": [3, 11], "x": 11.25, "y": 3}, + {"matrix": [3, 12], "x": 12.25, "y": 3, "w": 1.75}, + {"matrix": [3, 13], "x": 14, "y": 3}, + {"matrix": [3, 14], "x": 15, "y": 3}, + + {"matrix": [4, 0], "x": 0, "y": 4, "w": 1.5}, + {"matrix": [4, 2], "x": 1.5, "y": 4, "w": 1.5}, + {"matrix": [4, 3], "x": 3, "y": 4, "w": 7}, + {"matrix": [4, 9], "x": 10, "y": 4, "w": 1.5}, + {"matrix": [4, 11], "x": 11.5, "y": 4, "w": 1.5}, + {"matrix": [4, 12], "x": 13, "y": 4}, + {"matrix": [4, 13], "x": 14, "y": 4}, + {"matrix": [4, 14], "x": 15, "y": 4} ] } } diff --git a/keyboards/wilba_tech/wt65_d/wt65_d.c b/keyboards/wilba_tech/wt65_d/wt65_d.c deleted file mode 100644 index b734652c78..0000000000 --- a/keyboards/wilba_tech/wt65_d/wt65_d.c +++ /dev/null @@ -1,4 +0,0 @@ -// Copyright 2022 Jason Williams (@wilba) -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "wt65_d.h"
\ No newline at end of file diff --git a/keyboards/wilba_tech/wt65_d/wt65_d.h b/keyboards/wilba_tech/wt65_d/wt65_d.h deleted file mode 100644 index 7ab39e81e7..0000000000 --- a/keyboards/wilba_tech/wt65_d/wt65_d.h +++ /dev/null @@ -1,151 +0,0 @@ -// Copyright 2022 Jason Williams (@wilba) -// SPDX-License-Identifier: GPL-2.0-or-later - -#pragma once - -#include "quantum.h" - -#define ____ KC_NO - -/* - * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ ┌───────┐ - * │000│003│002│001│004│005│006│007│008│009│012│011│010│013│213│014│ │013 │ 2u Backspace - * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┤ └─┬─────┤ - * │100 │101│102│103│104│105│106│107│108│109│110│111│112│113 │114│ │ │ - * 2.25u ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤ ┌──┴┐113 │ ISO Enter - * LShift │200 │201│202│203│204│205│206│207│208│209│210│211│212 │214│ │212│ │ - * ┌────────┐ ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤ └───┴────┘ - * │300 │ │300 │301│302│303│304│305│306│307│308│309│310│311│312 │313│314│ - * └────────┘ ├────┼───┼───┴┬──┴───┴───┴───┴───┴───┴┬──┴─┬─┴─┬─┴──┬───┼───┼───┤ - * │400 │401│402 │403 │409 │410│411 │412│413│414│ - * └────┴───┴────┴───────────────────────┴────┴───┴────┴───┴───┴───┘ - * ┌─────┬─────┬───────────────────────────┬─────┬─────┐ - * │400 │402 │403 │409 │411 │ WKL - * └─────┴─────┴───────────────────────────┴─────┴─────┘ - */ - -#define LAYOUT_all( \ - K000, K003, K002, K001, K004, K005, K006, K007, K008, K009, K012, K011, K010, K013, K213, K014, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K214, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, \ - K400, K401, K402, K403, K409, K410, K411, K412, K413, K414 \ -) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214 }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314 }, \ - { K400, K401, K402, K403, ____, ____, ____, ____, ____, K409, K410, K411, K412, K413, K414 } \ -} - -#define LAYOUT_65_ansi( \ - K000, K003, K002, K001, K004, K005, K006, K007, K008, K009, K012, K011, K010, K013, K014, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K214, \ - K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, \ - K400, K401, K402, K403, K409, K410, K411, K412, K413, K414 \ -) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, ____, K214 }, \ - { K300, ____, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314 }, \ - { K400, K401, K402, K403, ____, ____, ____, ____, ____, K409, K410, K411, K412, K413, K414 } \ -} - -#define LAYOUT_65_ansi_split_bs( \ - K000, K003, K002, K001, K004, K005, K006, K007, K008, K009, K012, K011, K010, K013, K213, K014, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K214, \ - K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, \ - K400, K401, K402, K403, K409, K410, K411, K412, K413, K414 \ -) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214 }, \ - { K300, ____, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314 }, \ - { K400, K401, K402, K403, ____, ____, ____, ____, ____, K409, K410, K411, K412, K413, K414 } \ -} - -#define LAYOUT_65_ansi_wkl( \ - K000, K003, K002, K001, K004, K005, K006, K007, K008, K009, K012, K011, K010, K013, K014, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K214, \ - K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, \ - K400, K402, K403, K409, K411, K412, K413, K414 \ -) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, ____, K214 }, \ - { K300, ____, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314 }, \ - { K400, ____, K402, K403, ____, ____, ____, ____, ____, K409, ____, K411, K412, K413, K414 } \ -} - -#define LAYOUT_65_ansi_wkl_split_bs( \ - K000, K003, K002, K001, K004, K005, K006, K007, K008, K009, K012, K011, K010, K013, K213, K014, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K214, \ - K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, \ - K400, K402, K403, K409, K411, K412, K413, K414 \ -) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214 }, \ - { K300, ____, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314 }, \ - { K400, ____, K402, K403, ____, ____, ____, ____, ____, K409, ____, K411, K412, K413, K414 } \ -} - -#define LAYOUT_65_iso( \ - K000, K003, K002, K001, K004, K005, K006, K007, K008, K009, K012, K011, K010, K013, K014, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K114, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K113, K214, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, \ - K400, K401, K402, K403, K409, K410, K411, K412, K413, K414 \ -) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, ____, K214 }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314 }, \ - { K400, K401, K402, K403, ____, ____, ____, ____, ____, K409, K410, K411, K412, K413, K414 } \ -} - -#define LAYOUT_65_iso_split_bs( \ - K000, K003, K002, K001, K004, K005, K006, K007, K008, K009, K012, K011, K010, K013, K213, K014, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K114, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K113, K214, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, \ - K400, K401, K402, K403, K409, K410, K411, K412, K413, K414 \ -) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214 }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314 }, \ - { K400, K401, K402, K403, ____, ____, ____, ____, ____, K409, K410, K411, K412, K413, K414 } \ -} - -#define LAYOUT_65_iso_wkl( \ - K000, K003, K002, K001, K004, K005, K006, K007, K008, K009, K012, K011, K010, K013, K014, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K114, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K113, K214, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, \ - K400, K402, K403, K409, K411, K412, K413, K414 \ -) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, ____, K214 }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314 }, \ - { K400, ____, K402, K403, ____, ____, ____, ____, ____, K409, ____, K411, K412, K413, K414 } \ -} - -#define LAYOUT_65_iso_wkl_split_bs( \ - K000, K003, K002, K001, K004, K005, K006, K007, K008, K009, K012, K011, K010, K013, K213, K014, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K114, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K113, K214, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, \ - K400, K402, K403, K409, K411, K412, K413, K414 \ -) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214 }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314 }, \ - { K400, ____, K402, K403, ____, ____, ____, ____, ____, K409, ____, K411, K412, K413, K414 } \ -} diff --git a/keyboards/wilba_tech/wt65_f/config.h b/keyboards/wilba_tech/wt65_f/config.h index bf47e02d25..b7d24e1cd3 100644 --- a/keyboards/wilba_tech/wt65_f/config.h +++ b/keyboards/wilba_tech/wt65_f/config.h @@ -16,23 +16,6 @@ #pragma once - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 } -#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 } // B7, B0 - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt65_f/info.json b/keyboards/wilba_tech/wt65_f/info.json index f5916bea1b..9cf7004132 100644 --- a/keyboards/wilba_tech/wt65_f/info.json +++ b/keyboards/wilba_tech/wt65_f/info.json @@ -8,6 +8,11 @@ "pid": "0x002D", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"], + "rows": ["F0", "F1", "F4", "F6", "F7"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/wilba_tech/wt65_f/wt65_f.c b/keyboards/wilba_tech/wt65_f/wt65_f.c deleted file mode 100644 index 18d29a5eed..0000000000 --- a/keyboards/wilba_tech/wt65_f/wt65_f.c +++ /dev/null @@ -1,17 +0,0 @@ -/* Copyright 2021 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "wt65_f.h" diff --git a/keyboards/wilba_tech/wt65_fx/config.h b/keyboards/wilba_tech/wt65_fx/config.h index bf47e02d25..b7d24e1cd3 100644 --- a/keyboards/wilba_tech/wt65_fx/config.h +++ b/keyboards/wilba_tech/wt65_fx/config.h @@ -16,23 +16,6 @@ #pragma once - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 } -#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 } // B7, B0 - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt65_fx/info.json b/keyboards/wilba_tech/wt65_fx/info.json index afbc80b8c1..d9195621e2 100644 --- a/keyboards/wilba_tech/wt65_fx/info.json +++ b/keyboards/wilba_tech/wt65_fx/info.json @@ -8,6 +8,11 @@ "pid": "0x002E", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"], + "rows": ["F0", "F1", "F4", "F6", "F7"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/wilba_tech/wt65_fx/wt65_fx.c b/keyboards/wilba_tech/wt65_fx/wt65_fx.c deleted file mode 100644 index 136adb8ba9..0000000000 --- a/keyboards/wilba_tech/wt65_fx/wt65_fx.c +++ /dev/null @@ -1,17 +0,0 @@ -/* Copyright 2021 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "wt65_fx.h" diff --git a/keyboards/wilba_tech/wt65_g/config.h b/keyboards/wilba_tech/wt65_g/config.h index 807b7fa8ee..9541b1df12 100644 --- a/keyboards/wilba_tech/wt65_g/config.h +++ b/keyboards/wilba_tech/wt65_g/config.h @@ -16,23 +16,6 @@ #pragma once - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 } -#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 } // B7, B0 - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt65_g/info.json b/keyboards/wilba_tech/wt65_g/info.json index bdfea960a4..1f794e5e37 100644 --- a/keyboards/wilba_tech/wt65_g/info.json +++ b/keyboards/wilba_tech/wt65_g/info.json @@ -8,6 +8,11 @@ "pid": "0x0022", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"], + "rows": ["F0", "F1", "F4", "F6", "F7"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/wilba_tech/wt65_g/wt65_g.c b/keyboards/wilba_tech/wt65_g/wt65_g.c deleted file mode 100644 index 54e823cb7e..0000000000 --- a/keyboards/wilba_tech/wt65_g/wt65_g.c +++ /dev/null @@ -1,17 +0,0 @@ -/* Copyright 2020 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "wt65_g.h" diff --git a/keyboards/wilba_tech/wt65_g2/config.h b/keyboards/wilba_tech/wt65_g2/config.h index 807b7fa8ee..9541b1df12 100644 --- a/keyboards/wilba_tech/wt65_g2/config.h +++ b/keyboards/wilba_tech/wt65_g2/config.h @@ -16,23 +16,6 @@ #pragma once - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 } -#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 } // B7, B0 - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt65_g2/info.json b/keyboards/wilba_tech/wt65_g2/info.json index 5d8769625a..b3d8d3bdbb 100644 --- a/keyboards/wilba_tech/wt65_g2/info.json +++ b/keyboards/wilba_tech/wt65_g2/info.json @@ -8,6 +8,11 @@ "pid": "0x002A", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"], + "rows": ["F0", "F1", "F4", "F6", "F7"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/wilba_tech/wt65_g2/wt65_g2.c b/keyboards/wilba_tech/wt65_g2/wt65_g2.c deleted file mode 100644 index 585f579a33..0000000000 --- a/keyboards/wilba_tech/wt65_g2/wt65_g2.c +++ /dev/null @@ -1,17 +0,0 @@ -/* Copyright 2020 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "wt65_g2.h" diff --git a/keyboards/wilba_tech/wt65_h1/config.h b/keyboards/wilba_tech/wt65_h1/config.h index 807b7fa8ee..9541b1df12 100644 --- a/keyboards/wilba_tech/wt65_h1/config.h +++ b/keyboards/wilba_tech/wt65_h1/config.h @@ -16,23 +16,6 @@ #pragma once - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 } -#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 } // B7, B0 - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt65_h1/info.json b/keyboards/wilba_tech/wt65_h1/info.json index 2ccb1d9099..8adac386de 100644 --- a/keyboards/wilba_tech/wt65_h1/info.json +++ b/keyboards/wilba_tech/wt65_h1/info.json @@ -8,12 +8,88 @@ "pid": "0x0025", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"], + "rows": ["F0", "F1", "F4", "F6", "F7"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "atmel-dfu", "community_layouts": ["65_ansi_blocker_tsangan"], "layouts": { "LAYOUT_65_ansi_blocker_tsangan": { - "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.5}, {"x":1.5, "y":4}, {"x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"x":11, "y":4, "w":1.5}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] + "layout": [ + {"matrix": [0, 0], "x": 0, "y": 0}, + {"matrix": [0, 1], "x": 1, "y": 0}, + {"matrix": [0, 2], "x": 2, "y": 0}, + {"matrix": [0, 3], "x": 3, "y": 0}, + {"matrix": [0, 4], "x": 4, "y": 0}, + {"matrix": [0, 5], "x": 5, "y": 0}, + {"matrix": [0, 6], "x": 6, "y": 0}, + {"matrix": [0, 7], "x": 7, "y": 0}, + {"matrix": [0, 8], "x": 8, "y": 0}, + {"matrix": [0, 9], "x": 9, "y": 0}, + {"matrix": [0, 10], "x": 10, "y": 0}, + {"matrix": [0, 11], "x": 11, "y": 0}, + {"matrix": [0, 12], "x": 12, "y": 0}, + {"matrix": [0, 13], "x": 13, "y": 0, "w": 2}, + {"matrix": [0, 14], "x": 15, "y": 0}, + + {"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5}, + {"matrix": [1, 1], "x": 1.5, "y": 1}, + {"matrix": [1, 2], "x": 2.5, "y": 1}, + {"matrix": [1, 3], "x": 3.5, "y": 1}, + {"matrix": [1, 4], "x": 4.5, "y": 1}, + {"matrix": [1, 5], "x": 5.5, "y": 1}, + {"matrix": [1, 6], "x": 6.5, "y": 1}, + {"matrix": [1, 7], "x": 7.5, "y": 1}, + {"matrix": [1, 8], "x": 8.5, "y": 1}, + {"matrix": [1, 9], "x": 9.5, "y": 1}, + {"matrix": [1, 10], "x": 10.5, "y": 1}, + {"matrix": [1, 11], "x": 11.5, "y": 1}, + {"matrix": [1, 12], "x": 12.5, "y": 1}, + {"matrix": [1, 13], "x": 13.5, "y": 1, "w": 1.5}, + {"matrix": [1, 14], "x": 15, "y": 1}, + + {"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75}, + {"matrix": [2, 1], "x": 1.75, "y": 2}, + {"matrix": [2, 2], "x": 2.75, "y": 2}, + {"matrix": [2, 3], "x": 3.75, "y": 2}, + {"matrix": [2, 4], "x": 4.75, "y": 2}, + {"matrix": [2, 5], "x": 5.75, "y": 2}, + {"matrix": [2, 6], "x": 6.75, "y": 2}, + {"matrix": [2, 7], "x": 7.75, "y": 2}, + {"matrix": [2, 8], "x": 8.75, "y": 2}, + {"matrix": [2, 9], "x": 9.75, "y": 2}, + {"matrix": [2, 10], "x": 10.75, "y": 2}, + {"matrix": [2, 11], "x": 11.75, "y": 2}, + {"matrix": [2, 12], "x": 12.75, "y": 2, "w": 2.25}, + {"matrix": [2, 14], "x": 15, "y": 2}, + + {"matrix": [3, 0], "x": 0, "y": 3, "w": 2.25}, + {"matrix": [3, 2], "x": 2.25, "y": 3}, + {"matrix": [3, 3], "x": 3.25, "y": 3}, + {"matrix": [3, 4], "x": 4.25, "y": 3}, + {"matrix": [3, 5], "x": 5.25, "y": 3}, + {"matrix": [3, 6], "x": 6.25, "y": 3}, + {"matrix": [3, 7], "x": 7.25, "y": 3}, + {"matrix": [3, 8], "x": 8.25, "y": 3}, + {"matrix": [3, 9], "x": 9.25, "y": 3}, + {"matrix": [3, 10], "x": 10.25, "y": 3}, + {"matrix": [3, 11], "x": 11.25, "y": 3}, + {"matrix": [3, 12], "x": 12.25, "y": 3, "w": 1.75}, + {"matrix": [3, 13], "x": 14, "y": 3}, + {"matrix": [3, 14], "x": 15, "y": 3}, + + {"matrix": [4, 0], "x": 0, "y": 4, "w": 1.5}, + {"matrix": [4, 1], "x": 1.5, "y": 4}, + {"matrix": [4, 2], "x": 2.5, "y": 4, "w": 1.5}, + {"matrix": [4, 6], "x": 4, "y": 4, "w": 7}, + {"matrix": [4, 11], "x": 11, "y": 4, "w": 1.5}, + {"matrix": [4, 12], "x": 13, "y": 4}, + {"matrix": [4, 13], "x": 14, "y": 4}, + {"matrix": [4, 14], "x": 15, "y": 4} + ] } } } diff --git a/keyboards/wilba_tech/wt65_h1/wt65_h1.c b/keyboards/wilba_tech/wt65_h1/wt65_h1.c deleted file mode 100644 index e8e5466a98..0000000000 --- a/keyboards/wilba_tech/wt65_h1/wt65_h1.c +++ /dev/null @@ -1,17 +0,0 @@ -/* Copyright 2020 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "wt65_h1.h" diff --git a/keyboards/wilba_tech/wt65_h1/wt65_h1.h b/keyboards/wilba_tech/wt65_h1/wt65_h1.h deleted file mode 100644 index 4935bf6deb..0000000000 --- a/keyboards/wilba_tech/wt65_h1/wt65_h1.h +++ /dev/null @@ -1,36 +0,0 @@ -/* Copyright 2020 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include "quantum.h" - -#define ____ KC_NO - -// This is equivalent to LAYOUT_all -#define LAYOUT_65_ansi_blocker_tsangan( \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K214, \ - K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, \ - K400, K401, K402, K406, K411, K412, K413, K414 \ -) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, ____, K214 }, \ - { K300, ____, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314 }, \ - { K400, K401, K402, ____, ____, ____, K406, ____, ____, ____, ____, K411, K412, K413, K414 } \ -} diff --git a/keyboards/wilba_tech/wt65_xt/config.h b/keyboards/wilba_tech/wt65_xt/config.h index 525df76d1b..9541b1df12 100644 --- a/keyboards/wilba_tech/wt65_xt/config.h +++ b/keyboards/wilba_tech/wt65_xt/config.h @@ -16,23 +16,6 @@ #pragma once - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 } -#define MATRIX_COL_PINS { B7, B0, F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt65_xt/info.json b/keyboards/wilba_tech/wt65_xt/info.json index 575d1c3add..98c21c8230 100644 --- a/keyboards/wilba_tech/wt65_xt/info.json +++ b/keyboards/wilba_tech/wt65_xt/info.json @@ -8,6 +8,11 @@ "pid": "0x001D", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["B7", "B0", "F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"], + "rows": ["F0", "F1", "F4", "F6", "F7"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/wilba_tech/wt65_xt/wt65_xt.c b/keyboards/wilba_tech/wt65_xt/wt65_xt.c deleted file mode 100644 index 62be919a06..0000000000 --- a/keyboards/wilba_tech/wt65_xt/wt65_xt.c +++ /dev/null @@ -1,17 +0,0 @@ -/* Copyright 2020 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "wt65_xt.h" diff --git a/keyboards/wilba_tech/wt65_xtx/config.h b/keyboards/wilba_tech/wt65_xtx/config.h index c799ec8bc4..9b6b3c7955 100644 --- a/keyboards/wilba_tech/wt65_xtx/config.h +++ b/keyboards/wilba_tech/wt65_xtx/config.h @@ -15,23 +15,6 @@ */ #pragma once - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 } -#define MATRIX_COL_PINS { B7, B0, F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt65_xtx/info.json b/keyboards/wilba_tech/wt65_xtx/info.json index 196044185b..e9394e8a02 100644 --- a/keyboards/wilba_tech/wt65_xtx/info.json +++ b/keyboards/wilba_tech/wt65_xtx/info.json @@ -8,6 +8,11 @@ "pid": "0x001E", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["B7", "B0", "F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"], + "rows": ["F0", "F1", "F4", "F6", "F7"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/wilba_tech/wt65_xtx/wt65_xtx.c b/keyboards/wilba_tech/wt65_xtx/wt65_xtx.c deleted file mode 100644 index 38aa7c362d..0000000000 --- a/keyboards/wilba_tech/wt65_xtx/wt65_xtx.c +++ /dev/null @@ -1,17 +0,0 @@ -/* Copyright 2020 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "wt65_xtx.h" diff --git a/keyboards/wilba_tech/wt69_a/config.h b/keyboards/wilba_tech/wt69_a/config.h index e893d73def..bc06d6ce9c 100644 --- a/keyboards/wilba_tech/wt69_a/config.h +++ b/keyboards/wilba_tech/wt69_a/config.h @@ -16,23 +16,6 @@ #pragma once - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F0, E6, F4, F6, F7 } -#define MATRIX_COL_PINS { B7, B0, F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION ROW2COL - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt69_a/info.json b/keyboards/wilba_tech/wt69_a/info.json index 67faf978d4..7d643b66ce 100644 --- a/keyboards/wilba_tech/wt69_a/info.json +++ b/keyboards/wilba_tech/wt69_a/info.json @@ -8,6 +8,11 @@ "pid": "0x069A", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["B7", "B0", "F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"], + "rows": ["F0", "E6", "F4", "F6", "F7"] + }, + "diode_direction": "ROW2COL", "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/wilba_tech/wt70_jb/config.h b/keyboards/wilba_tech/wt70_jb/config.h index 0a853d659c..914d9b2763 100644 --- a/keyboards/wilba_tech/wt70_jb/config.h +++ b/keyboards/wilba_tech/wt70_jb/config.h @@ -15,31 +15,12 @@ */ #pragma once - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { E6, F0, F4, F6, F7 } -#define MATRIX_COL_PINS { F5, D5, D3, D2, D1, D0, B7, C7, C6, B6, B5, B4, D7, D6, D4, B0, B3 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE // RGBLIGHT configuation -#define RGB_DI_PIN B2 -#ifdef RGB_DI_PIN #define RGBLED_NUM 2 #define RGBLIGHT_HUE_STEP 8 #define RGBLIGHT_SAT_STEP 8 @@ -54,4 +35,3 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#endif diff --git a/keyboards/wilba_tech/wt70_jb/info.json b/keyboards/wilba_tech/wt70_jb/info.json index a004bb43a0..b4f9f05fb0 100644 --- a/keyboards/wilba_tech/wt70_jb/info.json +++ b/keyboards/wilba_tech/wt70_jb/info.json @@ -8,6 +8,14 @@ "pid": "0x001F", "device_version": "0.0.1" }, + "ws2812": { + "pin": "B2" + }, + "matrix_pins": { + "cols": ["F5", "D5", "D3", "D2", "D1", "D0", "B7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "B0", "B3"], + "rows": ["E6", "F0", "F4", "F6", "F7"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/wilba_tech/wt75_a/config.h b/keyboards/wilba_tech/wt75_a/config.h index d678e7f0e9..4638b0fba9 100644 --- a/keyboards/wilba_tech/wt75_a/config.h +++ b/keyboards/wilba_tech/wt75_a/config.h @@ -16,23 +16,6 @@ #pragma once - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F1, F0, E6, F4, F6, F7 } -#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 } - -/* COL2ROW, ROW2COL */ -#define DIODE_DIRECTION ROW2COL - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt75_a/info.json b/keyboards/wilba_tech/wt75_a/info.json index 2434233335..a531ab8a19 100644 --- a/keyboards/wilba_tech/wt75_a/info.json +++ b/keyboards/wilba_tech/wt75_a/info.json @@ -8,6 +8,11 @@ "pid": "0x075A", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"], + "rows": ["F1", "F0", "E6", "F4", "F6", "F7"] + }, + "diode_direction": "ROW2COL", "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/wilba_tech/wt75_a/wt75_a.c b/keyboards/wilba_tech/wt75_a/wt75_a.c deleted file mode 100644 index ccff6d62c9..0000000000 --- a/keyboards/wilba_tech/wt75_a/wt75_a.c +++ /dev/null @@ -1,17 +0,0 @@ -/* Copyright 2018 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -// Nothing to see here, move along... ;-) diff --git a/keyboards/wilba_tech/wt75_b/config.h b/keyboards/wilba_tech/wt75_b/config.h index e36da68c4e..f519fe6603 100644 --- a/keyboards/wilba_tech/wt75_b/config.h +++ b/keyboards/wilba_tech/wt75_b/config.h @@ -16,23 +16,6 @@ #pragma once - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F1, F0, E6, F4, F6, F7 } -#define MATRIX_COL_PINS { F5, D5, B1, B7, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, B2, D4 } - -/* COL2ROW, ROW2COL */ -#define DIODE_DIRECTION ROW2COL - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt75_b/info.json b/keyboards/wilba_tech/wt75_b/info.json index b2bd5a02ae..af090acd3a 100644 --- a/keyboards/wilba_tech/wt75_b/info.json +++ b/keyboards/wilba_tech/wt75_b/info.json @@ -8,6 +8,11 @@ "pid": "0x075B", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["F5", "D5", "B1", "B7", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "B2", "D4"], + "rows": ["F1", "F0", "E6", "F4", "F6", "F7"] + }, + "diode_direction": "ROW2COL", "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/wilba_tech/wt75_b/wt75_b.c b/keyboards/wilba_tech/wt75_b/wt75_b.c deleted file mode 100644 index ccff6d62c9..0000000000 --- a/keyboards/wilba_tech/wt75_b/wt75_b.c +++ /dev/null @@ -1,17 +0,0 @@ -/* Copyright 2018 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -// Nothing to see here, move along... ;-) diff --git a/keyboards/wilba_tech/wt75_c/config.h b/keyboards/wilba_tech/wt75_c/config.h index 0bd449089c..7d07822eb6 100644 --- a/keyboards/wilba_tech/wt75_c/config.h +++ b/keyboards/wilba_tech/wt75_c/config.h @@ -16,23 +16,6 @@ #pragma once - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F1, F0, E6, F4, F6, F7 } -#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, B7, D4 } - -/* COL2ROW, ROW2COL */ -#define DIODE_DIRECTION ROW2COL - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt75_c/info.json b/keyboards/wilba_tech/wt75_c/info.json index 85a9987908..86ccc5df0e 100644 --- a/keyboards/wilba_tech/wt75_c/info.json +++ b/keyboards/wilba_tech/wt75_c/info.json @@ -8,6 +8,11 @@ "pid": "0x075C", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "B7", "D4"], + "rows": ["F1", "F0", "E6", "F4", "F6", "F7"] + }, + "diode_direction": "ROW2COL", "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/wilba_tech/wt75_c/wt75_c.c b/keyboards/wilba_tech/wt75_c/wt75_c.c deleted file mode 100644 index ccff6d62c9..0000000000 --- a/keyboards/wilba_tech/wt75_c/wt75_c.c +++ /dev/null @@ -1,17 +0,0 @@ -/* Copyright 2018 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -// Nothing to see here, move along... ;-) diff --git a/keyboards/wilba_tech/wt80_a/config.h b/keyboards/wilba_tech/wt80_a/config.h index 8112d1f888..59cb397a00 100644 --- a/keyboards/wilba_tech/wt80_a/config.h +++ b/keyboards/wilba_tech/wt80_a/config.h @@ -16,23 +16,6 @@ #pragma once - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F1, F0, E6, F4, F6, F7 } -#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4, B7, B0 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION ROW2COL - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt80_a/info.json b/keyboards/wilba_tech/wt80_a/info.json index 337207404a..0a814235d9 100644 --- a/keyboards/wilba_tech/wt80_a/info.json +++ b/keyboards/wilba_tech/wt80_a/info.json @@ -8,6 +8,11 @@ "pid": "0x080A", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "B7", "B0"], + "rows": ["F1", "F0", "E6", "F4", "F6", "F7"] + }, + "diode_direction": "ROW2COL", "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/wilba_tech/wt80_a/wt80_a.c b/keyboards/wilba_tech/wt80_a/wt80_a.c deleted file mode 100644 index ccff6d62c9..0000000000 --- a/keyboards/wilba_tech/wt80_a/wt80_a.c +++ /dev/null @@ -1,17 +0,0 @@ -/* Copyright 2018 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -// Nothing to see here, move along... ;-) diff --git a/keyboards/wilba_tech/wt80_bc/config.h b/keyboards/wilba_tech/wt80_bc/config.h index aa5ba2d573..9541b1df12 100644 --- a/keyboards/wilba_tech/wt80_bc/config.h +++ b/keyboards/wilba_tech/wt80_bc/config.h @@ -16,23 +16,6 @@ #pragma once - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F1, F0, E6, F4, F6, F7 } -#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4, B7, B0 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt80_bc/info.json b/keyboards/wilba_tech/wt80_bc/info.json index e2858d238a..a85325525b 100644 --- a/keyboards/wilba_tech/wt80_bc/info.json +++ b/keyboards/wilba_tech/wt80_bc/info.json @@ -8,6 +8,11 @@ "pid": "0x80B0", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "B7", "B0"], + "rows": ["F1", "F0", "E6", "F4", "F6", "F7"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/wilba_tech/wt80_bc/wt80_bc.c b/keyboards/wilba_tech/wt80_bc/wt80_bc.c deleted file mode 100644 index 1245a2fd0a..0000000000 --- a/keyboards/wilba_tech/wt80_bc/wt80_bc.c +++ /dev/null @@ -1,17 +0,0 @@ -/* Copyright 2020 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -// Nothing to see here, move along... ;-) diff --git a/keyboards/wilba_tech/wt80_g/config.h b/keyboards/wilba_tech/wt80_g/config.h index aa5ba2d573..9541b1df12 100644 --- a/keyboards/wilba_tech/wt80_g/config.h +++ b/keyboards/wilba_tech/wt80_g/config.h @@ -16,23 +16,6 @@ #pragma once - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F1, F0, E6, F4, F6, F7 } -#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4, B7, B0 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt80_g/info.json b/keyboards/wilba_tech/wt80_g/info.json index 1c7ff192d1..8aec5901ea 100644 --- a/keyboards/wilba_tech/wt80_g/info.json +++ b/keyboards/wilba_tech/wt80_g/info.json @@ -8,6 +8,11 @@ "pid": "0x0023", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "B7", "B0"], + "rows": ["F1", "F0", "E6", "F4", "F6", "F7"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/wilba_tech/wt80_g/wt80_g.c b/keyboards/wilba_tech/wt80_g/wt80_g.c deleted file mode 100644 index 821cffc7d3..0000000000 --- a/keyboards/wilba_tech/wt80_g/wt80_g.c +++ /dev/null @@ -1,17 +0,0 @@ -/* Copyright 2020 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "wt80_g.h" diff --git a/keyboards/wilba_tech/wt8_a/config.h b/keyboards/wilba_tech/wt8_a/config.h index 3ef5baf588..1377a18714 100644 --- a/keyboards/wilba_tech/wt8_a/config.h +++ b/keyboards/wilba_tech/wt8_a/config.h @@ -16,23 +16,6 @@ #pragma once - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { E6 } -#define MATRIX_COL_PINS { F4, F1, B2, B6, F6, F7, D5, B4 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/wt8_a/info.json b/keyboards/wilba_tech/wt8_a/info.json index 53cffb13ae..7de9331ffe 100644 --- a/keyboards/wilba_tech/wt8_a/info.json +++ b/keyboards/wilba_tech/wt8_a/info.json @@ -8,11 +8,26 @@ "pid": "0x008A", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["F4", "F1", "B2", "B6", "F6", "F7", "D5", "B4"], + "rows": ["E6"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { - "layout": [{"label":"x", "x":0, "y":0}, {"label":"x", "x":1, "y":0}, {"label":"x", "x":2, "y":0}, {"label":"x", "x":3, "y":0}, {"label":"x", "x":0, "y":1}, {"label":"x", "x":1, "y":1}, {"label":"x", "x":2, "y":1}, {"label":"x", "x":3, "y":1}] + "layout": [ + {"matrix": [0, 0], "x": 0, "y": 0}, + {"matrix": [0, 1], "x": 1, "y": 0}, + {"matrix": [0, 2], "x": 2, "y": 0}, + {"matrix": [0, 3], "x": 3, "y": 0}, + + {"matrix": [0, 4], "x": 0, "y": 1}, + {"matrix": [0, 5], "x": 1, "y": 1}, + {"matrix": [0, 6], "x": 2, "y": 1}, + {"matrix": [0, 7], "x": 3, "y": 1} + ] } } } diff --git a/keyboards/wilba_tech/wt8_a/wt8_a.c b/keyboards/wilba_tech/wt8_a/wt8_a.c deleted file mode 100644 index ccff6d62c9..0000000000 --- a/keyboards/wilba_tech/wt8_a/wt8_a.c +++ /dev/null @@ -1,17 +0,0 @@ -/* Copyright 2018 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -// Nothing to see here, move along... ;-) diff --git a/keyboards/wilba_tech/wt8_a/wt8_a.h b/keyboards/wilba_tech/wt8_a/wt8_a.h deleted file mode 100644 index 0fb754f0ab..0000000000 --- a/keyboards/wilba_tech/wt8_a/wt8_a.h +++ /dev/null @@ -1,27 +0,0 @@ -/* Copyright 2018 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include "quantum.h" - -#define ____ KC_NO - -#define LAYOUT( \ - K00, K01, K02, K03, K04, K05, K06, K07 ) \ - { \ - {K00, K01, K02, K03, K04, K05, K06, K07 }, \ - } diff --git a/keyboards/wilba_tech/zeal60/config.h b/keyboards/wilba_tech/zeal60/config.h index 5a3ad34bf7..e57bafe20d 100644 --- a/keyboards/wilba_tech/zeal60/config.h +++ b/keyboards/wilba_tech/zeal60/config.h @@ -15,18 +15,10 @@ */ #pragma once - -// Zeal60 PCB default pin-out -#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 } -#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 } - // IS31FL3731 driver #define DRIVER_COUNT 2 #define RGB_MATRIX_LED_COUNT 72 -// COL2ROW or ROW2COL -#define DIODE_DIRECTION COL2ROW - // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap #define LOCKING_SUPPORT_ENABLE // Locking resynchronize hack diff --git a/keyboards/wilba_tech/zeal60/info.json b/keyboards/wilba_tech/zeal60/info.json index 5ef0875419..764b040320 100644 --- a/keyboards/wilba_tech/zeal60/info.json +++ b/keyboards/wilba_tech/zeal60/info.json @@ -8,6 +8,11 @@ "pid": "0x0060", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"], + "rows": ["F0", "F1", "F4", "F6", "F7"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "atmel-dfu", "community_layouts": ["60_ansi", "60_iso", "60_hhkb", "60_ansi_split_bs_rshift"], diff --git a/keyboards/wilba_tech/zeal60/keymaps/tusing/README.md b/keyboards/wilba_tech/zeal60/keymaps/tusing/README.md index 8688892e59..1fbd745742 100644 --- a/keyboards/wilba_tech/zeal60/keymaps/tusing/README.md +++ b/keyboards/wilba_tech/zeal60/keymaps/tusing/README.md @@ -36,7 +36,7 @@ You might find the [**full PCB image**](https://cdn.shopify.com/s/files/1/0490/7 ```c // Set up RGB underglow. - #define RGB_DI_PIN B0 // The pin your RGB strip is wired to + #define WS2812_DI_PIN B0 // The pin your RGB strip is wired to #define RGBLED_NUM 35 // Number of LEDs #define RGBLIGHT_HUE_STEP 5 // How much each press of rgb_hue changes hue #define RGBLIGHT_SAT_STEP 10 // How much each press of rgb_sat changes sat diff --git a/keyboards/wilba_tech/zeal60/keymaps/tusing/config.h b/keyboards/wilba_tech/zeal60/keymaps/tusing/config.h index b106ebc181..e797f81941 100644 --- a/keyboards/wilba_tech/zeal60/keymaps/tusing/config.h +++ b/keyboards/wilba_tech/zeal60/keymaps/tusing/config.h @@ -20,7 +20,7 @@ #define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0 // Set up RGB underglow. -#define RGB_DI_PIN B0 // The pin your RGB strip is wired to +#define WS2812_DI_PIN B0 // The pin your RGB strip is wired to #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL diff --git a/keyboards/wilba_tech/zeal65/config.h b/keyboards/wilba_tech/zeal65/config.h index 1ab6b62751..4a73ed3b27 100644 --- a/keyboards/wilba_tech/zeal65/config.h +++ b/keyboards/wilba_tech/zeal65/config.h @@ -15,18 +15,10 @@ */ #pragma once - -// Zeal60 PCB default pin-out -#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 } -#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 } - // IS31FL3731 driver #define DRIVER_COUNT 2 #define RGB_MATRIX_LED_COUNT 72 -// COL2ROW or ROW2COL -#define DIODE_DIRECTION COL2ROW - // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap #define LOCKING_SUPPORT_ENABLE // Locking resynchronize hack diff --git a/keyboards/wilba_tech/zeal65/info.json b/keyboards/wilba_tech/zeal65/info.json index 935dc18874..f442660b45 100644 --- a/keyboards/wilba_tech/zeal65/info.json +++ b/keyboards/wilba_tech/zeal65/info.json @@ -8,14 +8,162 @@ "pid": "0x0065", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"], + "rows": ["F0", "F1", "F4", "F6", "F7"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { "LAYOUT_65_all": { - "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"Del", "x":14, "y":0}, {"label":"Home", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Backspace", "x":13.5, "y":1, "w":1.5}, {"label":"PgUp", "x":15, "y":1}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"PgDn", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"End", "x":15, "y":3}, {"label":"Win", "x":0, "y":4, "w":1.5}, {"label":"Alt", "x":1.5, "y":4, "w":1.5}, {"x":3, "y":4, "w":7}, {"label":"Fn2", "x":10, "y":4, "w":1.5}, {"label":"Fn1", "x":11.5, "y":4, "w":1.5}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}] + "layout": [ + {"matrix": [0, 0], "x": 0, "y": 0}, + {"matrix": [0, 1], "x": 1, "y": 0}, + {"matrix": [0, 2], "x": 2, "y": 0}, + {"matrix": [0, 3], "x": 3, "y": 0}, + {"matrix": [0, 4], "x": 4, "y": 0}, + {"matrix": [0, 5], "x": 5, "y": 0}, + {"matrix": [0, 6], "x": 6, "y": 0}, + {"matrix": [0, 7], "x": 7, "y": 0}, + {"matrix": [0, 8], "x": 8, "y": 0}, + {"matrix": [0, 9], "x": 9, "y": 0}, + {"matrix": [0, 10], "x": 10, "y": 0}, + {"matrix": [0, 11], "x": 11, "y": 0}, + {"matrix": [0, 12], "x": 12, "y": 0}, + {"matrix": [0, 13], "x": 13, "y": 0}, + {"matrix": [2, 13], "x": 14, "y": 0}, + {"matrix": [0, 14], "x": 15, "y": 0}, + + {"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5}, + {"matrix": [1, 1], "x": 1.5, "y": 1}, + {"matrix": [1, 2], "x": 2.5, "y": 1}, + {"matrix": [1, 3], "x": 3.5, "y": 1}, + {"matrix": [1, 4], "x": 4.5, "y": 1}, + {"matrix": [1, 5], "x": 5.5, "y": 1}, + {"matrix": [1, 6], "x": 6.5, "y": 1}, + {"matrix": [1, 7], "x": 7.5, "y": 1}, + {"matrix": [1, 8], "x": 8.5, "y": 1}, + {"matrix": [1, 9], "x": 9.5, "y": 1}, + {"matrix": [1, 10], "x": 10.5, "y": 1}, + {"matrix": [1, 11], "x": 11.5, "y": 1}, + {"matrix": [1, 12], "x": 12.5, "y": 1}, + {"matrix": [1, 13], "x": 13.5, "y": 1, "w": 1.5}, + {"matrix": [1, 14], "x": 15, "y": 1}, + + {"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75}, + {"matrix": [2, 1], "x": 1.75, "y": 2}, + {"matrix": [2, 2], "x": 2.75, "y": 2}, + {"matrix": [2, 3], "x": 3.75, "y": 2}, + {"matrix": [2, 4], "x": 4.75, "y": 2}, + {"matrix": [2, 5], "x": 5.75, "y": 2}, + {"matrix": [2, 6], "x": 6.75, "y": 2}, + {"matrix": [2, 7], "x": 7.75, "y": 2}, + {"matrix": [2, 8], "x": 8.75, "y": 2}, + {"matrix": [2, 9], "x": 9.75, "y": 2}, + {"matrix": [2, 10], "x": 10.75, "y": 2}, + {"matrix": [2, 11], "x": 11.75, "y": 2}, + {"matrix": [2, 12], "x": 12.75, "y": 2, "w": 2.25}, + {"matrix": [2, 14], "x": 15, "y": 2}, + + {"matrix": [3, 0], "x": 0, "y": 3, "w": 2.25}, + {"matrix": [3, 2], "x": 2.25, "y": 3}, + {"matrix": [3, 3], "x": 3.25, "y": 3}, + {"matrix": [3, 4], "x": 4.25, "y": 3}, + {"matrix": [3, 5], "x": 5.25, "y": 3}, + {"matrix": [3, 6], "x": 6.25, "y": 3}, + {"matrix": [3, 7], "x": 7.25, "y": 3}, + {"matrix": [3, 8], "x": 8.25, "y": 3}, + {"matrix": [3, 9], "x": 9.25, "y": 3}, + {"matrix": [3, 10], "x": 10.25, "y": 3}, + {"matrix": [3, 11], "x": 11.25, "y": 3}, + {"matrix": [3, 12], "x": 12.25, "y": 3, "w": 1.75}, + {"matrix": [3, 13], "x": 14, "y": 3}, + {"matrix": [3, 14], "x": 15, "y": 3}, + + {"matrix": [4, 0], "x": 0, "y": 4, "w": 1.5}, + {"matrix": [4, 1], "x": 1.5, "y": 4, "w": 1.5}, + {"matrix": [4, 7], "x": 3, "y": 4, "w": 7}, + {"matrix": [4, 10], "x": 10, "y": 4, "w": 1.5}, + {"matrix": [4, 11], "x": 11.5, "y": 4, "w": 1.5}, + {"matrix": [4, 12], "x": 13, "y": 4}, + {"matrix": [4, 13], "x": 14, "y": 4}, + {"matrix": [4, 14], "x": 15, "y": 4} + ] }, "LAYOUT_65_normie": { - "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Home", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"PgUp", "x":15, "y":1}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"PgDn", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"End", "x":15, "y":3}, {"label":"Win", "x":0, "y":4, "w":1.5}, {"label":"Alt", "x":1.5, "y":4, "w":1.5}, {"x":3, "y":4, "w":7}, {"label":"Fn2", "x":10, "y":4, "w":1.5}, {"label":"Fn1", "x":11.5, "y":4, "w":1.5}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}] + "layout": [ + {"matrix": [0, 0], "x": 0, "y": 0}, + {"matrix": [0, 1], "x": 1, "y": 0}, + {"matrix": [0, 2], "x": 2, "y": 0}, + {"matrix": [0, 3], "x": 3, "y": 0}, + {"matrix": [0, 4], "x": 4, "y": 0}, + {"matrix": [0, 5], "x": 5, "y": 0}, + {"matrix": [0, 6], "x": 6, "y": 0}, + {"matrix": [0, 7], "x": 7, "y": 0}, + {"matrix": [0, 8], "x": 8, "y": 0}, + {"matrix": [0, 9], "x": 9, "y": 0}, + {"matrix": [0, 10], "x": 10, "y": 0}, + {"matrix": [0, 11], "x": 11, "y": 0}, + {"matrix": [0, 12], "x": 12, "y": 0}, + {"matrix": [0, 13], "x": 13, "y": 0, "w": 2}, + {"matrix": [0, 14], "x": 15, "y": 0}, + + {"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5}, + {"matrix": [1, 1], "x": 1.5, "y": 1}, + {"matrix": [1, 2], "x": 2.5, "y": 1}, + {"matrix": [1, 3], "x": 3.5, "y": 1}, + {"matrix": [1, 4], "x": 4.5, "y": 1}, + {"matrix": [1, 5], "x": 5.5, "y": 1}, + {"matrix": [1, 6], "x": 6.5, "y": 1}, + {"matrix": [1, 7], "x": 7.5, "y": 1}, + {"matrix": [1, 8], "x": 8.5, "y": 1}, + {"matrix": [1, 9], "x": 9.5, "y": 1}, + {"matrix": [1, 10], "x": 10.5, "y": 1}, + {"matrix": [1, 11], "x": 11.5, "y": 1}, + {"matrix": [1, 12], "x": 12.5, "y": 1}, + {"matrix": [1, 13], "x": 13.5, "y": 1, "w": 1.5}, + {"matrix": [1, 14], "x": 15, "y": 1}, + + {"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75}, + {"matrix": [2, 1], "x": 1.75, "y": 2}, + {"matrix": [2, 2], "x": 2.75, "y": 2}, + {"matrix": [2, 3], "x": 3.75, "y": 2}, + {"matrix": [2, 4], "x": 4.75, "y": 2}, + {"matrix": [2, 5], "x": 5.75, "y": 2}, + {"matrix": [2, 6], "x": 6.75, "y": 2}, + {"matrix": [2, 7], "x": 7.75, "y": 2}, + {"matrix": [2, 8], "x": 8.75, "y": 2}, + {"matrix": [2, 9], "x": 9.75, "y": 2}, + {"matrix": [2, 10], "x": 10.75, "y": 2}, + {"matrix": [2, 11], "x": 11.75, "y": 2}, + {"matrix": [2, 12], "x": 12.75, "y": 2, "w": 2.25}, + {"matrix": [2, 14], "x": 15, "y": 2}, + + {"matrix": [3, 0], "x": 0, "y": 3, "w": 2.25}, + {"matrix": [3, 2], "x": 2.25, "y": 3}, + {"matrix": [3, 3], "x": 3.25, "y": 3}, + {"matrix": [3, 4], "x": 4.25, "y": 3}, + {"matrix": [3, 5], "x": 5.25, "y": 3}, + {"matrix": [3, 6], "x": 6.25, "y": 3}, + {"matrix": [3, 7], "x": 7.25, "y": 3}, + {"matrix": [3, 8], "x": 8.25, "y": 3}, + {"matrix": [3, 9], "x": 9.25, "y": 3}, + {"matrix": [3, 10], "x": 10.25, "y": 3}, + {"matrix": [3, 11], "x": 11.25, "y": 3}, + {"matrix": [3, 12], "x": 12.25, "y": 3, "w": 1.75}, + {"matrix": [3, 13], "x": 14, "y": 3}, + {"matrix": [3, 14], "x": 15, "y": 3}, + + {"matrix": [4, 0], "x": 0, "y": 4, "w": 1.5}, + {"matrix": [4, 1], "x": 1.5, "y": 4, "w": 1.5}, + {"matrix": [4, 7], "x": 3, "y": 4, "w": 7}, + {"matrix": [4, 10], "x": 10, "y": 4, "w": 1.5}, + {"matrix": [4, 11], "x": 11.5, "y": 4, "w": 1.5}, + {"matrix": [4, 12], "x": 13, "y": 4}, + {"matrix": [4, 13], "x": 14, "y": 4}, + {"matrix": [4, 14], "x": 15, "y": 4} + ] } } } diff --git a/keyboards/wilba_tech/zeal65/zeal65.h b/keyboards/wilba_tech/zeal65/zeal65.h index 34c1294165..3966f822ee 100644 --- a/keyboards/wilba_tech/zeal65/zeal65.h +++ b/keyboards/wilba_tech/zeal65/zeal65.h @@ -18,33 +18,3 @@ #include "quantum.h" #include "keyboards/wilba_tech/wt_rgb_backlight_keycodes.h" #include "via.h" - -#define XXX KC_NO - -#define LAYOUT_65_all( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, K0E, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, \ - K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ - K40, K41, K47, K4A, K4B, K4C, K4D, K4E \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E }, \ - { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ - { K40, K41, XXX, XXX, XXX, XXX, XXX, K47, XXX, XXX, K4A, K4B, K4C, K4D, K4E } \ -} - -#define LAYOUT_65_normie( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, \ - K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ - K40, K41, K47, K4A, K4B, K4C, K4D, K4E \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, XXX, K2E }, \ - { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ - { K40, K41, XXX, XXX, XXX, XXX, XXX, K47, XXX, XXX, K4A, K4B, K4C, K4D, K4E } \ -} |