summaryrefslogtreecommitdiff
path: root/keyboards/wilba_tech/wt60_xt
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/wilba_tech/wt60_xt')
-rw-r--r--keyboards/wilba_tech/wt60_xt/config.h39
-rw-r--r--keyboards/wilba_tech/wt60_xt/info.json2
-rw-r--r--keyboards/wilba_tech/wt60_xt/rules.mk6
3 files changed, 2 insertions, 45 deletions
diff --git a/keyboards/wilba_tech/wt60_xt/config.h b/keyboards/wilba_tech/wt60_xt/config.h
index df174cddd1..c4032aee27 100644
--- a/keyboards/wilba_tech/wt60_xt/config.h
+++ b/keyboards/wilba_tech/wt60_xt/config.h
@@ -16,7 +16,6 @@
#pragma once
-#include "config_common.h"
#define AUDIO_PIN C6
#define AUDIO_CLICKY
@@ -41,49 +40,11 @@
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
diff --git a/keyboards/wilba_tech/wt60_xt/info.json b/keyboards/wilba_tech/wt60_xt/info.json
index 50f64f9d6f..d31d8380b1 100644
--- a/keyboards/wilba_tech/wt60_xt/info.json
+++ b/keyboards/wilba_tech/wt60_xt/info.json
@@ -8,6 +8,8 @@
"pid": "0x001C",
"device_version": "0.0.1"
},
+ "processor": "atmega32u4",
+ "bootloader": "atmel-dfu",
"layouts": {
"LAYOUT_all": {
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2.25, "y":0}, {"x":3.25, "y":0}, {"x":4.25, "y":0}, {"x":5.25, "y":0}, {"x":6.25, "y":0}, {"x":7.25, "y":0}, {"x":8.25, "y":0}, {"x":9.25, "y":0}, {"x":10.25, "y":0}, {"x":11.25, "y":0}, {"x":12.25, "y":0}, {"x":13.25, "y":0}, {"x":14.25, "y":0}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2.25, "y":1, "w":1.5}, {"x":3.75, "y":1}, {"x":4.75, "y":1}, {"x":5.75, "y":1}, {"x":6.75, "y":1}, {"x":7.75, "y":1}, {"x":8.75, "y":1}, {"x":9.75, "y":1}, {"x":10.75, "y":1}, {"x":11.75, "y":1}, {"x":12.75, "y":1}, {"x":13.75, "y":1}, {"x":14.75, "y":1}, {"x":15.75, "y":1, "w":1.5}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2.25, "y":2, "w":1.75}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":12, "y":2}, {"x":13, "y":2}, {"x":14, "y":2}, {"x":15, "y":2, "w":2.25}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2.25, "y":3, "w":1.25}, {"x":3.5, "y":3}, {"x":4.5, "y":3}, {"x":5.5, "y":3}, {"x":6.5, "y":3}, {"x":7.5, "y":3}, {"x":8.5, "y":3}, {"x":9.5, "y":3}, {"x":10.5, "y":3}, {"x":11.5, "y":3}, {"x":12.5, "y":3}, {"x":13.5, "y":3}, {"x":14.5, "y":3, "w":1.75}, {"x":16.25, "y":3}, {"x":0, "y":4}, {"x":1, "y":4}, {"x":2.25, "y":4, "w":1.25}, {"x":3.5, "y":4, "w":1.25}, {"x":4.75, "y":4, "w":1.25}, {"x":6, "y":4, "w":6.25}, {"x":12.25, "y":4, "w":1.25}, {"x":13.5, "y":4, "w":1.25}, {"x":14.75, "y":4, "w":1.25}, {"x":16, "y":4, "w":1.25}]
diff --git a/keyboards/wilba_tech/wt60_xt/rules.mk b/keyboards/wilba_tech/wt60_xt/rules.mk
index 9666f1e255..388b9f97e3 100644
--- a/keyboards/wilba_tech/wt60_xt/rules.mk
+++ b/keyboards/wilba_tech/wt60_xt/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
# Build Options
# change yes to no to disable
#