diff options
Diffstat (limited to 'keyboards/wilba_tech/rama_works_m6_a/keymaps')
10 files changed, 342 insertions, 0 deletions
diff --git a/keyboards/wilba_tech/rama_works_m6_a/keymaps/default/keymap.c b/keyboards/wilba_tech/rama_works_m6_a/keymaps/default/keymap.c new file mode 100644 index 0000000000..7a408fa8aa --- /dev/null +++ b/keyboards/wilba_tech/rama_works_m6_a/keymaps/default/keymap.c @@ -0,0 +1,16 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + LAYOUT( + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6), + + LAYOUT( + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO), + + LAYOUT( + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO), + + LAYOUT( + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO) }; + diff --git a/keyboards/wilba_tech/rama_works_m6_a/keymaps/default/readme.md b/keyboards/wilba_tech/rama_works_m6_a/keymaps/default/readme.md new file mode 100644 index 0000000000..c74b537a5a --- /dev/null +++ b/keyboards/wilba_tech/rama_works_m6_a/keymaps/default/readme.md @@ -0,0 +1,12 @@ + + +# Default RAMA M6-A Layout + +This is an example layout to demonstrate layer toggling. + +The top left key will cycle through six layers. + +If LEDs are installed, one of the six LEDs will be on to indicate current layer. + +LEDs should be installed cathode pin on the square pad. + diff --git a/keyboards/wilba_tech/rama_works_m6_a/keymaps/knops/config.h b/keyboards/wilba_tech/rama_works_m6_a/keymaps/knops/config.h new file mode 100644 index 0000000000..999d8876c2 --- /dev/null +++ b/keyboards/wilba_tech/rama_works_m6_a/keymaps/knops/config.h @@ -0,0 +1,24 @@ +/* Copyright 2017 Pawnerd + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif diff --git a/keyboards/wilba_tech/rama_works_m6_a/keymaps/knops/keymap.c b/keyboards/wilba_tech/rama_works_m6_a/keymaps/knops/keymap.c new file mode 100644 index 0000000000..d687fe8516 --- /dev/null +++ b/keyboards/wilba_tech/rama_works_m6_a/keymaps/knops/keymap.c @@ -0,0 +1,129 @@ +#include QMK_KEYBOARD_H + +/*KNOPS_MISC*/ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /*KNOPS_LAYOUT*/ + +}; + +void set_led_state(int ledId, bool state) +{ + if (state) + { + switch (ledId) + { + case 0: + PORTD |= (1 << 6); + break; + case 1: + PORTB |= (1 << 6); + break; + case 2: + PORTF |= (1 << 5); + break; + case 3: + PORTB |= (1 << 4); + break; + case 4: + PORTC |= (1 << 7); + break; + case 5: + PORTF |= (1 << 7); + break; + } + } + else + { + switch (ledId) + { + case 0: + PORTD &= ~(1 << 6); + break; + case 1: + PORTB &= ~(1 << 6); + break; + case 2: + PORTF &= ~(1 << 5); + break; + case 3: + PORTB &= ~(1 << 4); + break; + case 4: + PORTC &= ~(1 << 7); + break; + case 5: + PORTF &= ~(1 << 7); + break; + } + } +} + +void led_init_ports() +{ + // Switch #1 + DDRD |= (1 << 6); + PORTD &= ~(1 << 6); + + // Switch #2 + DDRB |= (1 << 6); + PORTB &= ~(1 << 6); + + // Switch #3 + DDRF |= (1 << 5); + PORTF &= ~(1 << 5); + + // Switch #4 + DDRB |= (1 << 4); + PORTB &= ~(1 << 4); + + // Switch #5 + DDRC |= (1 << 7); + PORTC &= ~(1 << 7); + + // Switch #6 + DDRF |= (1 << 7); + PORTF &= ~(1 << 7); +} + +void led_set_layer(int layer) +{ + + /*KNOPS_SIMPLELED_STATES*/ +} + +void matrix_init_user(void) +{ + led_init_ports(); + + led_set_layer(0); + + /*KNOPS_INIT*/ +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + //keyevent_t event = record->event; + + /*KNOPS_MACRO*/ + return NULL; +} + +void matrix_scan_user(void) +{ + /*KNOPS_SCAN*/ +} + +void led_set_user(uint8_t usb_led) +{ + + /*KNOPS_FUNCTIONALLED_STATES*/ +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) +{ + + /*KNOPS_PROCESS_STATE*/ + return NULL; +} diff --git a/keyboards/wilba_tech/rama_works_m6_a/keymaps/knops/readme.md b/keyboards/wilba_tech/rama_works_m6_a/keymaps/knops/readme.md new file mode 100644 index 0000000000..58696974ed --- /dev/null +++ b/keyboards/wilba_tech/rama_works_m6_a/keymaps/knops/readme.md @@ -0,0 +1,11 @@ +# Default Knops Mini Layout + + + + + +This is the keymap that our configurator uses to compile new keymaps and features. Here is a screenshot: + + + +As of 12th of february 2018, this tool has not yet been released to the public. You may have a look at our older tool, KBFlasher: [our (almost outdated) configurator tool](http://knops.io/configurator.html) for this.
\ No newline at end of file diff --git a/keyboards/wilba_tech/rama_works_m6_a/keymaps/krusli/README.md b/keyboards/wilba_tech/rama_works_m6_a/keymaps/krusli/README.md new file mode 100644 index 0000000000..7c1fa38fcb --- /dev/null +++ b/keyboards/wilba_tech/rama_works_m6_a/keymaps/krusli/README.md @@ -0,0 +1,28 @@ +# krusli's RAMA M6-A Layout + +Personal keymap for the RAMA M6-A. + +Keymap was from my own port for the M6-A before official support was added, thus the backlighting code is not ported yet from the official default keymap. + +Top-right button acts as a "toggle between layers" button. Layer 0 -> Layer 1 -> Layer 2 -> Layer 0 -> ... + +* Layer 0: Git and Discord shortcuts +* Layer 1: Media playback and volume controls +* Layer 2: Osu! gamepad layer + +## Helpful alternative keymaps (WIP) + +### Arrow cluster + +Use [karabiner-elements](https://github.com/tekezo/Karabiner-Elements) on macOS so that the state of the modifiers (shift, caps lock) are synchronised between keyboards (for shift + arrow key text selection, for example). It's also a handy tool for customising keyboard behaviour on a Mac. + +On Windows/Linux modifier state should be shared between all keyboards by default. + +Installation: install [homebrew](https://brew.sh) and run `brew install Caskroom/cask/karabiner-elements`. + +```C +LAYOUT( + KC_ESC, KC_UP, TO(_LAYER0), + KC_LEFT, KC_DOWN, KC_RIGHT +) +``` diff --git a/keyboards/wilba_tech/rama_works_m6_a/keymaps/krusli/keymap.c b/keyboards/wilba_tech/rama_works_m6_a/keymaps/krusli/keymap.c new file mode 100644 index 0000000000..410229ae47 --- /dev/null +++ b/keyboards/wilba_tech/rama_works_m6_a/keymaps/krusli/keymap.c @@ -0,0 +1,71 @@ +#include QMK_KEYBOARD_H +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. + +enum layers +{ + _LAYER0, + _LAYER1, + _LAYER2 +}; + +enum custom_keycodes +{ + GIT_ADD = SAFE_RANGE, + GIT_COMMIT, + GIT_PUSH, + MUTE, + DEAFEN +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) +{ + if (record->event.pressed) + { + switch (keycode) + { + case GIT_ADD: + SEND_STRING("git add ." SS_TAP(X_ENTER)); + break; + case GIT_COMMIT: + SEND_STRING("git commit -m " SS_DOWN(X_LSHIFT) SS_TAP(X_QUOTE) SS_UP(X_LSHIFT)); + break; + case GIT_PUSH: + SEND_STRING("git push" SS_TAP(X_ENTER)); + break; + case MUTE: + SEND_STRING(SS_LGUI(SS_LSFT("M"))); + break; + case DEAFEN: + SEND_STRING(SS_LGUI(SS_LSFT("D"))); + break; + return false; + } + } + return true; +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_LAYER0] = LAYOUT( + MUTE, DEAFEN, TO(_LAYER1), + GIT_ADD, GIT_COMMIT, GIT_PUSH), + [_LAYER1] = LAYOUT( + KC_VOLD, KC_VOLU, TO(_LAYER2), + KC_MRWD, KC_MPLY, KC_MNXT), + [_LAYER2] = LAYOUT( + KC_ESC, KC_UP, TO(_LAYER0), + KC_Z, KC_X, KC_SPACE)}; + +void matrix_init_user(void) +{ +#ifdef BACKLIGHT_ENABLE + backlight_level(0); +#endif +} diff --git a/keyboards/wilba_tech/rama_works_m6_a/keymaps/naut/config.h b/keyboards/wilba_tech/rama_works_m6_a/keymaps/naut/config.h new file mode 100644 index 0000000000..7f642203aa --- /dev/null +++ b/keyboards/wilba_tech/rama_works_m6_a/keymaps/naut/config.h @@ -0,0 +1,24 @@ +/* Copyright 2018 Wilba + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif
\ No newline at end of file diff --git a/keyboards/wilba_tech/rama_works_m6_a/keymaps/naut/keymap.c b/keyboards/wilba_tech/rama_works_m6_a/keymaps/naut/keymap.c new file mode 100644 index 0000000000..df4cf9be37 --- /dev/null +++ b/keyboards/wilba_tech/rama_works_m6_a/keymaps/naut/keymap.c @@ -0,0 +1,17 @@ +#include QMK_KEYBOARD_H + +// Define Layers +#define _BASE 0 +#define _FNX 1 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + // Base Layer + [_BASE] = LAYOUT( + TO(1), KC_UP, KC_PGDN, + KC_LEFT, KC_DOWN, KC_RGHT), + + // Fn Layer + [_FNX] = LAYOUT( + TO(0), KC_VOLU, KC_MPLY, + KC_MRWD, KC_VOLD, KC_MFFD)};
\ No newline at end of file diff --git a/keyboards/wilba_tech/rama_works_m6_a/keymaps/naut/readme.md b/keyboards/wilba_tech/rama_works_m6_a/keymaps/naut/readme.md new file mode 100644 index 0000000000..2166e37831 --- /dev/null +++ b/keyboards/wilba_tech/rama_works_m6_a/keymaps/naut/readme.md @@ -0,0 +1,10 @@ +Naut's Keymap +======= + +Arrows for HHKB and Media keys for M65-A. + +Keymap Maintainer: [Jason Barnachea](https://github.com/nautxx) + +Difference from base layout: Similar. + +Intended usage: Arrows and Media Keys. |