3 files changed, 20 insertions, 33 deletions
diff --git a/keyboards/wilba_tech/rama_works_m10_c/config.h b/keyboards/wilba_tech/rama_works_m10_c/config.h
index 9f68eb4287..1cc9655b1b 100644
--- a/keyboards/wilba_tech/rama_works_m10_c/config.h
+++ b/keyboards/wilba_tech/rama_works_m10_c/config.h
@@ -15,23 +15,6 @@
  */
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { E6 }
-#define MATRIX_COL_PINS { D7, B6, F0, D6, B5, F1, D4, B4, F4, F5 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/rama_works_m10_c/info.json b/keyboards/wilba_tech/rama_works_m10_c/info.json
index b60dd53815..64af4a5dcf 100644
--- a/keyboards/wilba_tech/rama_works_m10_c/info.json
+++ b/keyboards/wilba_tech/rama_works_m10_c/info.json
@@ -8,11 +8,30 @@
     "pid": "0x00AC",
     "device_version": "0.0.1"
   },
+  "matrix_pins": {
+    "cols": ["D7", "B6", "F0", "D6", "B5", "F1", "D4", "B4", "F4", "F5"],
+    "rows": ["E6"]
+  },
+  "diode_direction": "COL2ROW",
   "processor": "atmega32u4",
   "bootloader": "atmel-dfu",
   "layouts": {
       "LAYOUT": {
-          "layout": [{"label":"0,0", "x":0, "y":0}, {"label":"0,1", "x":1, "y":0}, {"label":"0,2", "x":2, "y":0}, {"label":"0,3", "x":0, "y":1}, {"label":"0,4", "x":1, "y":1}, {"label":"0,5", "x":2, "y":1}, {"label":"0,6", "x":0, "y":2}, {"label":"0,7", "x":1, "y":2}, {"label":"0,8", "x":2, "y":2}, {"label":"0,9", "x":1, "y":3, "w":2}]
+          "layout": [
+                {"matrix": [0, 0], "x": 0, "y": 0},
+                {"matrix": [0, 1], "x": 1, "y": 0},
+                {"matrix": [0, 2], "x": 2, "y": 0},
+
+                {"matrix": [0, 3], "x": 0, "y": 1},
+                {"matrix": [0, 4], "x": 1, "y": 1},
+                {"matrix": [0, 5], "x": 2, "y": 1},
+
+                {"matrix": [0, 6], "x": 0, "y": 2},
+                {"matrix": [0, 7], "x": 1, "y": 2},
+                {"matrix": [0, 8], "x": 2, "y": 2},
+
+                {"matrix": [0, 9], "x": 1, "y": 3, "w": 2}
+          ]
       }
   }
 }
diff --git a/keyboards/wilba_tech/rama_works_m10_c/rama_works_m10_c.h b/keyboards/wilba_tech/rama_works_m10_c/rama_works_m10_c.h
index 382cef1a6d..24dae9d7d0 100644
--- a/keyboards/wilba_tech/rama_works_m10_c/rama_works_m10_c.h
+++ b/keyboards/wilba_tech/rama_works_m10_c/rama_works_m10_c.h
@@ -18,18 +18,3 @@
 #include "quantum.h"
 #include "keyboards/wilba_tech/wt_rgb_backlight_keycodes.h"
 #include "via.h"
-
-
-/* This is a shortcut to help you visually see your layout.
- *
- * The first section contains all of the arguments representing the physical
- * layout of the board and position of the keys.
- *
- * The second converts the arguments into a two-dimensional array which
- * represents the switch matrix.
- */
-#define LAYOUT( \
-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09 \
-) { \
-        {K00, K01, K02, K03, K04, K05, K06, K07, K08, K09}, \
-}