4 files changed, 7 insertions, 39 deletions
diff --git a/keyboards/unikeyboard/diverge3/config.h b/keyboards/unikeyboard/diverge3/config.h
index 141fce0280..85fd49c3d2 100644
--- a/keyboards/unikeyboard/diverge3/config.h
+++ b/keyboards/unikeyboard/diverge3/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 10
@@ -43,9 +42,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 5
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
 /* serial.c configuration for split keyboard */
 #define SOFT_SERIAL_PIN D0
 
@@ -53,41 +49,17 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define SELECT_SOFT_SERIAL_SPEED 3
 #endif
 
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
 /* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
  */
  #define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/unikeyboard/diverge3/info.json b/keyboards/unikeyboard/diverge3/info.json
index 74dc2641a1..01c2922b25 100644
--- a/keyboards/unikeyboard/diverge3/info.json
+++ b/keyboards/unikeyboard/diverge3/info.json
@@ -8,6 +8,8 @@
     "pid": "0x1257",
     "device_version": "0.0.1"
   },
+  "processor": "atmega32u4",
+  "bootloader": "caterina",
   "layouts": {
     "LAYOUT": {
       "layout": [{"x":0, "y":0}, {"x":1, "y":0.75}, {"x":2, "y":0.25}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0.25}, {"x":6, "y":0.5}, {"x":10, "y":0.5}, {"x":11, "y":0.25}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0.25}, {"x":15, "y":0.75}, {"x":16, "y":0}, {"x":0, "y":1}, {"x":1, "y":1.75}, {"x":2, "y":1.25}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1.25}, {"x":6, "y":1.5}, {"x":10, "y":1.5}, {"x":11, "y":1.25}, {"x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1.25}, {"x":15, "y":1.75}, {"x":16, "y":1}, {"x":0, "y":2}, {"x":1, "y":2.75}, {"x":2, "y":2.25}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2.25}, {"x":6, "y":2.5}, {"x":10, "y":2.5}, {"x":11, "y":2.25}, {"x":12, "y":2}, {"x":13, "y":2}, {"x":14, "y":2.25}, {"x":15, "y":2.75}, {"x":16, "y":2}, {"x":0, "y":3}, {"x":1, "y":3.75}, {"x":2, "y":3.25}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3.25}, {"x":6, "y":3.5}, {"x":10, "y":3.5}, {"x":11, "y":3.25}, {"x":12, "y":3}, {"x":13, "y":3}, {"x":14, "y":3.25}, {"x":15, "y":3.75}, {"x":16, "y":3}, {"x":0, "y":4}, {"x":1, "y":4.75}, {"x":2, "y":4.25}, {"x":3, "y":4}, {"x":4, "y":4}, {"x":5, "y":4.75, "h":1.25}, {"x":6, "y":5, "h":1.25}, {"x":7, "y":5.25}, {"x":9, "y":5.25}, {"x":10, "y":5, "h":1.25}, {"x":11, "y":4.75, "h":1.25}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4.25}, {"x":15, "y":4.75}, {"x":16, "y":4}]
diff --git a/keyboards/unikeyboard/diverge3/keymaps/default/keymap.c b/keyboards/unikeyboard/diverge3/keymaps/default/keymap.c
index acf262696b..dc5c261f59 100644
--- a/keyboards/unikeyboard/diverge3/keymaps/default/keymap.c
+++ b/keyboards/unikeyboard/diverge3/keymaps/default/keymap.c
@@ -34,7 +34,7 @@ typedef struct {
   int state;
 } tap;
 
-int cur_dance (qk_tap_dance_state_t *state) {
+int cur_dance (tap_dance_state_t *state) {
   if (state->count == 1) {
     //If count = 1, and it has been interrupted - it doesn't matter if it is pressed or not: Send SINGLE_TAP
     if (state->interrupted || state->pressed==0) return SINGLE_TAP;
@@ -58,7 +58,7 @@ static tap se_tap_state = {
   .state = 0
 };
 
-void se_finished (qk_tap_dance_state_t *state, void *user_data) {
+void se_finished (tap_dance_state_t *state, void *user_data) {
   se_tap_state.state = cur_dance(state);
   switch (se_tap_state.state) {
     case SINGLE_TAP: register_code(KC_SPC); break;
@@ -70,7 +70,7 @@ void se_finished (qk_tap_dance_state_t *state, void *user_data) {
   }
 }
 
-void se_reset (qk_tap_dance_state_t *state, void *user_data) {
+void se_reset (tap_dance_state_t *state, void *user_data) {
   switch (se_tap_state.state) {
     case SINGLE_TAP: unregister_code(KC_SPC); break;
     case SINGLE_HOLD: unregister_code(KC_ENT); break;
@@ -79,7 +79,7 @@ void se_reset (qk_tap_dance_state_t *state, void *user_data) {
   se_tap_state.state = 0;
 }
 
-qk_tap_dance_action_t tap_dance_actions[] = {
+tap_dance_action_t tap_dance_actions[] = {
   [SE_TAP_DANCE] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, se_finished, se_reset)
 };
 
diff --git a/keyboards/unikeyboard/diverge3/rules.mk b/keyboards/unikeyboard/diverge3/rules.mk
index 7fc9fd2291..4069544018 100644
--- a/keyboards/unikeyboard/diverge3/rules.mk
+++ b/keyboards/unikeyboard/diverge3/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = caterina
-
 # Build Options
 #   change yes to no to disable
 #