diff options
Diffstat (limited to 'keyboards/takashiski')
| -rw-r--r-- | keyboards/takashiski/hecomi/alpha/config.h | 48 | ||||
| -rw-r--r-- | keyboards/takashiski/hecomi/alpha/info.json | 2 | ||||
| -rw-r--r-- | keyboards/takashiski/hecomi/alpha/rules.mk | 6 | ||||
| -rw-r--r-- | keyboards/takashiski/hecomi/keymaps/kakunpc/keymap.c | 6 | ||||
| -rw-r--r-- | keyboards/takashiski/hecomi/rules.mk | 20 | ||||
| -rw-r--r-- | keyboards/takashiski/namecard2x4/info.json | 3 | ||||
| -rw-r--r-- | keyboards/takashiski/namecard2x4/keymaps/brainfuck/keymap.c | 12 | ||||
| -rw-r--r-- | keyboards/takashiski/namecard2x4/rev1/config.h | 39 | ||||
| -rw-r--r-- | keyboards/takashiski/namecard2x4/rev2/config.h | 39 | ||||
| -rw-r--r-- | keyboards/takashiski/namecard2x4/rules.mk | 6 | ||||
| -rw-r--r-- | keyboards/takashiski/otaku_split/rev0/config.h | 43 | ||||
| -rw-r--r-- | keyboards/takashiski/otaku_split/rev0/info.json | 2 | ||||
| -rw-r--r-- | keyboards/takashiski/otaku_split/rev0/rules.mk | 6 | ||||
| -rw-r--r-- | keyboards/takashiski/otaku_split/rev1/config.h | 43 | ||||
| -rw-r--r-- | keyboards/takashiski/otaku_split/rev1/info.json | 2 | ||||
| -rw-r--r-- | keyboards/takashiski/otaku_split/rev1/rules.mk | 6 |
16 files changed, 17 insertions, 266 deletions
diff --git a/keyboards/takashiski/hecomi/alpha/config.h b/keyboards/takashiski/hecomi/alpha/config.h index 05f1d35c83..71da6c194e 100644 --- a/keyboards/takashiski/hecomi/alpha/config.h +++ b/keyboards/takashiski/hecomi/alpha/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ //#define MATRIX_ROWS 5 @@ -42,15 +41,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, an3 define SOFT_SERIAL_PIN. - */ -//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - #define RGB_DI_PIN D4 #ifdef RGB_DI_PIN #define RGBLED_NUM 16 @@ -69,45 +59,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define RGBLIGHT_EFFECT_ALTERNATING #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -124,10 +80,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 -// /* #define USE_I2C #define MASTER_LEFT diff --git a/keyboards/takashiski/hecomi/alpha/info.json b/keyboards/takashiski/hecomi/alpha/info.json index 844736abd4..c286014577 100644 --- a/keyboards/takashiski/hecomi/alpha/info.json +++ b/keyboards/takashiski/hecomi/alpha/info.json @@ -8,6 +8,8 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/takashiski/hecomi/alpha/rules.mk b/keyboards/takashiski/hecomi/alpha/rules.mk index 343dd7d5a1..adea9f5950 100644 --- a/keyboards/takashiski/hecomi/alpha/rules.mk +++ b/keyboards/takashiski/hecomi/alpha/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/takashiski/hecomi/keymaps/kakunpc/keymap.c b/keyboards/takashiski/hecomi/keymaps/kakunpc/keymap.c index a42a87c65f..fb61d8ed62 100644 --- a/keyboards/takashiski/hecomi/keymaps/kakunpc/keymap.c +++ b/keyboards/takashiski/hecomi/keymaps/kakunpc/keymap.c @@ -28,21 +28,21 @@ enum layers{ #define KC_LW MO(LW) const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [DF]=LAYOUT(\ + [DF]=LAYOUT( KC_ESC,KC_GRV,KC_1,KC_2,KC_3,KC_4,KC_5, KC_6,KC_7,KC_8,KC_9,KC_0,KC_MINS,KC_EQL,KC_BSPC, KC_TAB ,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y, KC_Y,KC_U,KC_I,KC_O,KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_LCTL ,KC_A,KC_S,KC_D,KC_F,KC_G, KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_QUOT,KC_ENT, KC_LSFT ,KC_Z,KC_X,KC_C,KC_V,KC_B, KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_RSFT,KC_DEL, KC_LGUI,KC_NO,KC_LALT,KC_LW,LT_F13,KC_SPC, KC_SPC,LT_F14,KC_LEFT,KC_UP,KC_DOWN,KC_RIGHT ), - [LW]=LAYOUT(\ + [LW]=LAYOUT( RGB_TOG,KC_NO,RGB_VAD,RGB_VAI,RGB_HUI,RGB_HUD,KC_TRNS, RGB_MOD,RGB_RMOD,KC_TRNS,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, KC_NO ,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO ), - [FN]=LAYOUT(\ + [FN]=LAYOUT( KC_ESC,KC_GRV,KC_F1,KC_F2,KC_F3,KC_F4,KC_F5, KC_F6,KC_F7,KC_F8,KC_F9,KC_F10,KC_F11,KC_F12,KC_BSPC, KC_TAB ,KC_NO,KC_UP,KC_NO,KC_NO,KC_NO,KC_NO, KC_7,KC_8,KC_0,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, KC_LCTL ,KC_LEFT,KC_DOWN,KC_RIGHT,KC_NO,KC_NO, KC_4,KC_5,KC_6,KC_NO,KC_NO,KC_NO,KC_NO, diff --git a/keyboards/takashiski/hecomi/rules.mk b/keyboards/takashiski/hecomi/rules.mk index c46100f19e..41002fe272 100644 --- a/keyboards/takashiski/hecomi/rules.mk +++ b/keyboards/takashiski/hecomi/rules.mk @@ -1,21 +1 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = no # Enable N-Key Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output -SPLIT_KEYBOARD = yes - DEFAULT_FOLDER = takashiski/hecomi/alpha diff --git a/keyboards/takashiski/namecard2x4/info.json b/keyboards/takashiski/namecard2x4/info.json index 3c4b8dd2a8..d1aa7848fc 100644 --- a/keyboards/takashiski/namecard2x4/info.json +++ b/keyboards/takashiski/namecard2x4/info.json @@ -8,7 +8,8 @@ "pid": "0x0000", "device_version": "0.0.1" }, - "bootloader": "atmel-dfu", + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [{"label":"1", "x":0, "y":0}, {"label":"2", "x":1, "y":0}, {"label":"3", "x":2, "y":0}, {"label":"4", "x":3, "y":0}, {"label":"5", "x":0, "y":1}, {"label":"6", "x":1, "y":1}, {"label":"7", "x":2, "y":1}, {"label":"8", "x":3, "y":1}] diff --git a/keyboards/takashiski/namecard2x4/keymaps/brainfuck/keymap.c b/keyboards/takashiski/namecard2x4/keymaps/brainfuck/keymap.c index 494c06bd73..a60408366d 100644 --- a/keyboards/takashiski/namecard2x4/keymaps/brainfuck/keymap.c +++ b/keyboards/takashiski/namecard2x4/keymaps/brainfuck/keymap.c @@ -27,16 +27,16 @@ enum Layer const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [JP] = LAYOUT( - JP_LABK,JP_RABK,JP_PLUS,JP_MINS,\ - LT(CONFIG,JP_DOT),JP_COMM,JP_LBRC,LT(CONFIG,JP_RBRC)\ + JP_LABK,JP_RABK,JP_PLUS,JP_MINS, + LT(CONFIG,JP_DOT),JP_COMM,JP_LBRC,LT(CONFIG,JP_RBRC) ), [EN] = LAYOUT( - KC_LT,KC_GT,KC_PLUS,KC_MINS,\ - LT(CONFIG,KC_DOT),KC_COMM,KC_LBRC,LT(CONFIG,KC_RBRC)\ + KC_LT,KC_GT,KC_PLUS,KC_MINS, + LT(CONFIG,KC_DOT),KC_COMM,KC_LBRC,LT(CONFIG,KC_RBRC) ), [CONFIG]= LAYOUT( - KC_NO,DF(JP),DF(JP),KC_NO,\ - KC_TRNS,DF(EN),DF(JP),KC_TRNS\ + KC_NO,DF(JP),DF(JP),KC_NO, + KC_TRNS,DF(EN),DF(JP),KC_TRNS ) }; diff --git a/keyboards/takashiski/namecard2x4/rev1/config.h b/keyboards/takashiski/namecard2x4/rev1/config.h index 33d89616ca..f0de2d0a24 100644 --- a/keyboards/takashiski/namecard2x4/rev1/config.h +++ b/keyboards/takashiski/namecard2x4/rev1/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 2 @@ -55,49 +54,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_SAT_STEP 10 #define RGBLIGHT_VAL_STEP 10 -//#define BACKLIGHT_PIN F4 -//#define BACKLIGHT_BREATHING -//#define BACKLIGHT_LEVELS 1 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/takashiski/namecard2x4/rev2/config.h b/keyboards/takashiski/namecard2x4/rev2/config.h index 612d9a460e..c94fccc14b 100644 --- a/keyboards/takashiski/namecard2x4/rev2/config.h +++ b/keyboards/takashiski/namecard2x4/rev2/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 2 @@ -55,49 +54,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_SAT_STEP 10 #define RGBLIGHT_VAL_STEP 10 -//#define BACKLIGHT_PIN F4 -//#define BACKLIGHT_BREATHING -//#define BACKLIGHT_LEVELS 1 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/takashiski/namecard2x4/rules.mk b/keyboards/takashiski/namecard2x4/rules.mk index e0f4e62f04..dbe601b71f 100644 --- a/keyboards/takashiski/namecard2x4/rules.mk +++ b/keyboards/takashiski/namecard2x4/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/takashiski/otaku_split/rev0/config.h b/keyboards/takashiski/otaku_split/rev0/config.h index 7064c690bb..6fa3e09164 100644 --- a/keyboards/takashiski/otaku_split/rev0/config.h +++ b/keyboards/takashiski/otaku_split/rev0/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 10 @@ -44,10 +43,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - // #define RGB_DI_PIN E2 // #ifdef RGB_DI_PIN // #define RGBLED_NUM 16 @@ -64,45 +59,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 // #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -118,7 +79,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/takashiski/otaku_split/rev0/info.json b/keyboards/takashiski/otaku_split/rev0/info.json index 37844923fa..10d96ddfef 100644 --- a/keyboards/takashiski/otaku_split/rev0/info.json +++ b/keyboards/takashiski/otaku_split/rev0/info.json @@ -8,6 +8,8 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [{"label":"\u534a\u89d2", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"\u00a3", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":9.75, "y":0}, {"label":"*", "x":10.75, "y":0}, {"label":"(", "x":11.75, "y":0}, {"label":")", "x":12.75, "y":0}, {"label":"=", "x":13.75, "y":0}, {"label":"~", "x":14.75, "y":0}, {"label":"|", "x":15.75, "y":0}, {"label":"Backspace", "x":16.75, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"7", "x":6.5, "y":1}, {"label":"Y", "x":9.25, "y":1}, {"label":"U", "x":10.25, "y":1}, {"label":"I", "x":11.25, "y":1}, {"label":"O", "x":12.25, "y":1}, {"label":"P", "x":13.25, "y":1}, {"label":"`", "x":14.25, "y":1}, {"label":"{", "x":15.25, "y":1}, {"label":"Enter", "x":16.5, "y":1, "w":1.25, "h":2}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":9.5, "y":2}, {"label":"J", "x":10.5, "y":2}, {"label":"K", "x":11.5, "y":2}, {"label":"L", "x":12.5, "y":2}, {"label":"+", "x":13.5, "y":2}, {"label":"*", "x":14.5, "y":2}, {"label":"}", "x":15.5, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"1", "x":9, "y":3}, {"label":"N", "x":10, "y":3}, {"label":"M", "x":11, "y":3}, {"label":"<", "x":12, "y":3}, {"label":">", "x":13, "y":3}, {"label":"?", "x":14, "y":3}, {"label":"_", "x":15, "y":3}, {"label":"Shift", "x":16, "y":3, "w":1.75}, {"x":0, "y":4, "w":2}, {"label":"Ctrl", "x":2, "y":4, "w":1.25}, {"label":"Alt", "x":3.25, "y":4, "w":1.25}, {"label":"\u7121\u5909\u63db", "x":4.5, "y":4}, {"label":"\u2190", "x":5.5, "y":4}, {"label":"\u2193", "x":6.5, "y":4}, {"label":"\u2191", "x":8.75, "y":4}, {"label":"\u2192", "x":9.75, "y":4}, {"label":".", "x":10.75, "y":4}, {"label":"Menu", "x":11.75, "y":4}, {"label":"\u5909\u63db", "x":12.75, "y":4, "w":1.25}, {"label":"\u30ab\u30bf\u30ab\u30ca", "x":14, "y":4, "w":1.25}, {"label":"Alt", "x":15.25, "y":4, "w":1.25}, {"label":"Ctrl", "x":16.5, "y":4, "w":1.25}] diff --git a/keyboards/takashiski/otaku_split/rev0/rules.mk b/keyboards/takashiski/otaku_split/rev0/rules.mk index 2406b0dadf..d43bca5db2 100644 --- a/keyboards/takashiski/otaku_split/rev0/rules.mk +++ b/keyboards/takashiski/otaku_split/rev0/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/takashiski/otaku_split/rev1/config.h b/keyboards/takashiski/otaku_split/rev1/config.h index eb4b2d35dc..12ee7f610a 100644 --- a/keyboards/takashiski/otaku_split/rev1/config.h +++ b/keyboards/takashiski/otaku_split/rev1/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 10 @@ -48,10 +47,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 #define SPLIT_HAND_PIN D2 //fix pin. HIGH is left, LOW is right -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - // #define RGB_DI_PIN E2 // #ifdef RGB_DI_PIN // #define RGBLED_NUM 16 @@ -68,45 +63,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 // #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -122,7 +83,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/takashiski/otaku_split/rev1/info.json b/keyboards/takashiski/otaku_split/rev1/info.json index 9fa11237b6..e94d723857 100644 --- a/keyboards/takashiski/otaku_split/rev1/info.json +++ b/keyboards/takashiski/otaku_split/rev1/info.json @@ -8,6 +8,8 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [{"label":"\u534a\u89d2", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"\u00a3", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"Insert", "x":8.75, "y":0}, {"label":"&", "x":9.75, "y":0}, {"label":"*", "x":10.75, "y":0}, {"label":"(", "x":11.75, "y":0}, {"label":")", "x":12.75, "y":0}, {"label":"=", "x":13.75, "y":0}, {"label":"~", "x":14.75, "y":0}, {"label":"|", "x":15.75, "y":0}, {"label":"Backspace", "x":16.75, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"7", "x":6.5, "y":1}, {"label":"Y", "x":9.25, "y":1}, {"label":"U", "x":10.25, "y":1}, {"label":"I", "x":11.25, "y":1}, {"label":"O", "x":12.25, "y":1}, {"label":"P", "x":13.25, "y":1}, {"label":"`", "x":14.25, "y":1}, {"label":"{", "x":15.25, "y":1}, {"label":"Enter", "x":16.5, "y":1, "w":1.25, "h":2}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":9.5, "y":2}, {"label":"J", "x":10.5, "y":2}, {"label":"K", "x":11.5, "y":2}, {"label":"L", "x":12.5, "y":2}, {"label":"+", "x":13.5, "y":2}, {"label":"*", "x":14.5, "y":2}, {"label":"}", "x":15.5, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"1", "x":9, "y":3}, {"label":"N", "x":10, "y":3}, {"label":"M", "x":11, "y":3}, {"label":"<", "x":12, "y":3}, {"label":">", "x":13, "y":3}, {"label":"?", "x":14, "y":3}, {"label":"_", "x":15, "y":3}, {"label":"Shift", "x":16, "y":3, "w":1.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4}, {"label":"Alt", "x":2.25, "y":4, "w":1.25}, {"label":"\u7121\u5909\u63db", "x":3.5, "y":4}, {"label":"2", "x":4.5, "y":4}, {"label":"\u2190", "x":5.5, "y":4}, {"label":"\u2193", "x":6.5, "y":4}, {"label":"\u2191", "x":8.75, "y":4}, {"label":"\u2192", "x":9.75, "y":4}, {"label":".", "x":10.75, "y":4}, {"label":"\u5909\u63db", "x":11.75, "y":4, "w":1.25}, {"label":"\u30ab\u30bf\u30ab\u30ca", "x":13, "y":4, "w":1.25}, {"label":"Alt", "x":14.25, "y":4, "w":1.25}, {"label":"Menu", "x":15.5, "y":4}, {"label":"Ctrl", "x":16.5, "y":4, "w":1.25}] diff --git a/keyboards/takashiski/otaku_split/rev1/rules.mk b/keyboards/takashiski/otaku_split/rev1/rules.mk index 2406b0dadf..d43bca5db2 100644 --- a/keyboards/takashiski/otaku_split/rev1/rules.mk +++ b/keyboards/takashiski/otaku_split/rev1/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # |