summaryrefslogtreecommitdiff
path: root/keyboards/takashiski/hecomi
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/takashiski/hecomi')
-rw-r--r--keyboards/takashiski/hecomi/alpha/config.h48
-rw-r--r--keyboards/takashiski/hecomi/alpha/info.json2
-rw-r--r--keyboards/takashiski/hecomi/alpha/rules.mk6
-rw-r--r--keyboards/takashiski/hecomi/keymaps/kakunpc/keymap.c6
-rw-r--r--keyboards/takashiski/hecomi/rules.mk20
5 files changed, 5 insertions, 77 deletions
diff --git a/keyboards/takashiski/hecomi/alpha/config.h b/keyboards/takashiski/hecomi/alpha/config.h
index 05f1d35c83..71da6c194e 100644
--- a/keyboards/takashiski/hecomi/alpha/config.h
+++ b/keyboards/takashiski/hecomi/alpha/config.h
@@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
/* key matrix size */
//#define MATRIX_ROWS 5
@@ -42,15 +41,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, an3 define SOFT_SERIAL_PIN.
- */
-//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
#define RGB_DI_PIN D4
#ifdef RGB_DI_PIN
#define RGBLED_NUM 16
@@ -69,45 +59,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// #define RGBLIGHT_EFFECT_ALTERNATING
#endif
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
@@ -124,10 +80,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
-//
/*
#define USE_I2C
#define MASTER_LEFT
diff --git a/keyboards/takashiski/hecomi/alpha/info.json b/keyboards/takashiski/hecomi/alpha/info.json
index 844736abd4..c286014577 100644
--- a/keyboards/takashiski/hecomi/alpha/info.json
+++ b/keyboards/takashiski/hecomi/alpha/info.json
@@ -8,6 +8,8 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "processor": "atmega32u4",
+ "bootloader": "caterina",
"layouts": {
"LAYOUT": {
"layout": [
diff --git a/keyboards/takashiski/hecomi/alpha/rules.mk b/keyboards/takashiski/hecomi/alpha/rules.mk
index 343dd7d5a1..adea9f5950 100644
--- a/keyboards/takashiski/hecomi/alpha/rules.mk
+++ b/keyboards/takashiski/hecomi/alpha/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = caterina
-
# Build Options
# change yes to no to disable
#
diff --git a/keyboards/takashiski/hecomi/keymaps/kakunpc/keymap.c b/keyboards/takashiski/hecomi/keymaps/kakunpc/keymap.c
index a42a87c65f..fb61d8ed62 100644
--- a/keyboards/takashiski/hecomi/keymaps/kakunpc/keymap.c
+++ b/keyboards/takashiski/hecomi/keymaps/kakunpc/keymap.c
@@ -28,21 +28,21 @@ enum layers{
#define KC_LW MO(LW)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- [DF]=LAYOUT(\
+ [DF]=LAYOUT(
KC_ESC,KC_GRV,KC_1,KC_2,KC_3,KC_4,KC_5, KC_6,KC_7,KC_8,KC_9,KC_0,KC_MINS,KC_EQL,KC_BSPC,
KC_TAB ,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y, KC_Y,KC_U,KC_I,KC_O,KC_P,KC_LBRC,KC_RBRC,KC_BSLS,
KC_LCTL ,KC_A,KC_S,KC_D,KC_F,KC_G, KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_QUOT,KC_ENT,
KC_LSFT ,KC_Z,KC_X,KC_C,KC_V,KC_B, KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_RSFT,KC_DEL,
KC_LGUI,KC_NO,KC_LALT,KC_LW,LT_F13,KC_SPC, KC_SPC,LT_F14,KC_LEFT,KC_UP,KC_DOWN,KC_RIGHT
),
- [LW]=LAYOUT(\
+ [LW]=LAYOUT(
RGB_TOG,KC_NO,RGB_VAD,RGB_VAI,RGB_HUI,RGB_HUD,KC_TRNS, RGB_MOD,RGB_RMOD,KC_TRNS,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,
KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,
KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,
KC_NO ,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,
KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO
),
- [FN]=LAYOUT(\
+ [FN]=LAYOUT(
KC_ESC,KC_GRV,KC_F1,KC_F2,KC_F3,KC_F4,KC_F5, KC_F6,KC_F7,KC_F8,KC_F9,KC_F10,KC_F11,KC_F12,KC_BSPC,
KC_TAB ,KC_NO,KC_UP,KC_NO,KC_NO,KC_NO,KC_NO, KC_7,KC_8,KC_0,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,
KC_LCTL ,KC_LEFT,KC_DOWN,KC_RIGHT,KC_NO,KC_NO, KC_4,KC_5,KC_6,KC_NO,KC_NO,KC_NO,KC_NO,
diff --git a/keyboards/takashiski/hecomi/rules.mk b/keyboards/takashiski/hecomi/rules.mk
index c46100f19e..41002fe272 100644
--- a/keyboards/takashiski/hecomi/rules.mk
+++ b/keyboards/takashiski/hecomi/rules.mk
@@ -1,21 +1 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = caterina
-
-# Build Options
-# change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes # Mouse keys
-EXTRAKEY_ENABLE = yes # Audio control and System control
-CONSOLE_ENABLE = yes # Console for debug
-COMMAND_ENABLE = yes # Commands for debug and configuration
-NKRO_ENABLE = no # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
-AUDIO_ENABLE = no # Audio output
-SPLIT_KEYBOARD = yes
-
DEFAULT_FOLDER = takashiski/hecomi/alpha
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-28 18:37:14 +0000