summaryrefslogtreecommitdiff
path: root/keyboards/system76/launch_1
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/system76/launch_1')
-rw-r--r--keyboards/system76/launch_1/config.h29
-rw-r--r--keyboards/system76/launch_1/info.json23
-rw-r--r--keyboards/system76/launch_1/usb_mux.c81
3 files changed, 38 insertions, 95 deletions
diff --git a/keyboards/system76/launch_1/config.h b/keyboards/system76/launch_1/config.h
index 27e3025fe3..986a4db76e 100644
--- a/keyboards/system76/launch_1/config.h
+++ b/keyboards/system76/launch_1/config.h
@@ -17,34 +17,7 @@
#pragma once
-#ifdef RGB_MATRIX_ENABLE
-# define RGB_MATRIX_LED_COUNT 84
-# define RGB_MATRIX_KEYPRESSES // Reacts to keypresses
-// # define RGB_MATRIX_KEYRELEASES // Reacts to keyreleases (instead of keypresses)
-// # define RGB_MATRIX_FRAMEBUFFER_EFFECTS // Enables framebuffer effects
-# define RGB_DISABLE_WHEN_USB_SUSPENDED // Turns off effects when suspended
-// Limit brightness to support USB-A at 0.5 A
-// TODO: Do this dynamically based on power source
-# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 176 // Limits maximum brightness of LEDs to 176 out of 255. If not defined, maximum brightness is set to 255
-# define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_RAINBOW_MOVING_CHEVRON // Sets the default mode, if none has been set
-# define RGB_MATRIX_DEFAULT_HUE 142 // Sets the default hue value, if none has been set
-# define RGB_MATRIX_DEFAULT_SAT 255 // Sets the default saturation value, if none has been set
-# define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS // Sets the default brightness value, if none has been set
-# define RGB_MATRIX_DEFAULT_SPD 127 // Sets the default animation speed, if none has been set
-# define RGB_MATRIX_DISABLE_KEYCODES // Disables control of rgb matrix by keycodes (must use code functions to control the feature)
-
-# define ENABLE_RGB_MATRIX_CYCLE_ALL
-# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
-# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
-# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
-# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
-# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
-# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
-# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
-# define ENABLE_RGB_MATRIX_RAINDROPS
-# define ENABLE_RGB_MATRIX_SPLASH
-# define ENABLE_RGB_MATRIX_MULTISPLASH
-#endif // RGB_MATRIX_ENABLE
+#define RGB_MATRIX_DISABLE_KEYCODES // Disables control of rgb matrix by keycodes (must use code functions to control the feature)
// Mechanical locking support; use KC_LCAP, KC_LNUM, or KC_LSCR instead in keymap
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/system76/launch_1/info.json b/keyboards/system76/launch_1/info.json
index eba3a115b8..536b310cc0 100644
--- a/keyboards/system76/launch_1/info.json
+++ b/keyboards/system76/launch_1/info.json
@@ -11,7 +11,28 @@
"pin": "E2"
},
"rgb_matrix": {
- "driver": "ws2812"
+ "animations": {
+ "cycle_all": true,
+ "cycle_left_right": true,
+ "cycle_up_down": true,
+ "cycle_out_in": true,
+ "cycle_out_in_dual": true,
+ "rainbow_moving_chevron": true,
+ "cycle_pinwheel": true,
+ "cycle_spiral": true,
+ "raindrops": true,
+ "splash": true,
+ "multisplash": true
+ },
+ "default": {
+ "animation": "rainbow_moving_chevron",
+ "hue": 142,
+ "sat": 255,
+ "speed": 127
+ },
+ "driver": "ws2812",
+ "max_brightness": 176,
+ "sleep": true
},
"matrix_pins": {
"cols": ["D7", "C7", "C6", "B6", "B5", "B4", "D6", "D4", "E6", "D5", "D3", "D2", "B7", "B0"],
diff --git a/keyboards/system76/launch_1/usb_mux.c b/keyboards/system76/launch_1/usb_mux.c
index 6cb04dcdd7..dd51b7c4b2 100644
--- a/keyboards/system76/launch_1/usb_mux.c
+++ b/keyboards/system76/launch_1/usb_mux.c
@@ -77,51 +77,14 @@ i2c_status_t usb7206_read_reg(struct USB7206* self, uint32_t addr, uint8_t* data
return status;
}
- uint8_t read[2] = {
- 0x00, // Buffer address MSB: always 0
- 0x06, // Buffer address LSB: 6 to skip header
- };
-
- status = i2c_start((self->addr << 1) | I2C_WRITE, I2C_TIMEOUT);
- if (status >= 0) {
- for (uint16_t i = 0; i < sizeof(read); i++) {
- status = i2c_write(read[i], I2C_TIMEOUT);
- if (status < 0) {
- goto error;
- }
- }
- } else {
- goto error;
- }
-
- status = i2c_start((self->addr << 1) | I2C_READ, I2C_TIMEOUT);
- if (status < 0) {
- goto error;
- }
-
- // Read and ignore buffer length
- status = i2c_read_ack(I2C_TIMEOUT);
- if (status < 0) {
- goto error;
- }
+ uint16_t read = 0x0006; // Buffer address 6 to skip header
+ uint8_t data_with_buffer_length[length];
+ status = i2c_readReg16((self->addr << 1), read, data_with_buffer_length, length, I2C_TIMEOUT);
for (uint16_t i = 0; i < (length - 1) && status >= 0; i++) {
- status = i2c_read_ack(I2C_TIMEOUT);
- if (status >= 0) {
- data[i] = (uint8_t)status;
- }
+ data[i] = data_with_buffer_length[i+1];
}
- if (status >= 0) {
- status = i2c_read_nack(I2C_TIMEOUT);
- if (status >= 0) {
- data[(length - 1)] = (uint8_t)status;
- }
- }
-
-error:
- i2c_stop();
-
return (status < 0) ? status : length;
}
@@ -160,35 +123,21 @@ i2c_status_t usb7206_write_reg(struct USB7206* self, uint32_t addr, uint8_t* dat
(uint8_t)(addr >> 8), // Register address byte 1
(uint8_t)(addr >> 0), // Register address byte 0
};
+ uint8_t send_buffer_length = sizeof(register_write) + length;
+ uint8_t send_buffer[send_buffer_length];
+ uint8_t j = 0;
- status = i2c_start((self->addr << 1) | I2C_WRITE, I2C_TIMEOUT);
- if (status >= 0) {
- for (uint16_t i = 0; i < sizeof(register_write); i++) {
- status = i2c_write(register_write[i], I2C_TIMEOUT);
- if (status < 0) {
- goto error;
- }
- }
+ for (uint16_t i = 0; i < sizeof(register_write); i++) {
+ send_buffer[j++] = register_write[i];
+ }
- for (uint16_t i = 0; i < length; i++) {
- status = i2c_write(data[i], I2C_TIMEOUT);
- if (status < 0) {
- goto error;
- }
- }
- } else {
- goto error;
+ for (uint16_t i = 0; i < length; i++) {
+ send_buffer[j++] = data[i];
}
- i2c_stop();
+ status = i2c_transmit((self->addr << 1), send_buffer, send_buffer_length, I2C_TIMEOUT);
status = usb7206_register_access(self);
- if (status < 0) {
- goto error;
- }
-
-error:
- i2c_stop();
return (status < 0) ? status : length;
}
@@ -354,7 +303,7 @@ i2c_status_t ptn5110_init(struct PTN5110* self) {
// Read PTN5110 CC_STATUS.
// Returns zero on success or a negative number on error.
-i2c_status_t ptn5110_get_cc_status(struct PTN5110* self, uint8_t* cc) { return i2c_readReg(self->addr << 1, 0x1D, cc, 1, I2C_TIMEOUT); }
+i2c_status_t ptn5110_get_cc_status(struct PTN5110* self, uint8_t* cc) { return i2c_read_register(self->addr << 1, 0x1D, cc, 1, I2C_TIMEOUT); }
// Set PTN5110 SSMUX orientation.
// Returns zero on success or a negative number on error.
@@ -362,7 +311,7 @@ i2c_status_t ptn5110_set_ssmux(struct PTN5110* self, bool orientation) { return
// Write PTN5110 COMMAND.
// Returns zero on success or negative number on error.
-i2c_status_t ptn5110_command(struct PTN5110* self, uint8_t command) { return i2c_writeReg(self->addr << 1, 0x23, &command, 1, I2C_TIMEOUT); }
+i2c_status_t ptn5110_command(struct PTN5110* self, uint8_t command) { return i2c_write_register(self->addr << 1, 0x23, &command, 1, I2C_TIMEOUT); }
// Set orientation of PTN5110 operating as a sink, call this once.
// Returns zero on success or a negative number on error.
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-28 02:31:01 +0000