diff options
Diffstat (limited to 'keyboards/studiokestra')
| -rw-r--r-- | keyboards/studiokestra/bourgeau/readme.md | 2 | ||||
| -rw-r--r-- | keyboards/studiokestra/cascade/readme.md | 2 | ||||
| -rw-r--r-- | keyboards/studiokestra/galatea/readme.md | 2 | ||||
| -rw-r--r-- | keyboards/studiokestra/nue/readme.md | 2 |
4 files changed, 4 insertions, 4 deletions
diff --git a/keyboards/studiokestra/bourgeau/readme.md b/keyboards/studiokestra/bourgeau/readme.md index b0a0bb2a89..16f87618e0 100644 --- a/keyboards/studiokestra/bourgeau/readme.md +++ b/keyboards/studiokestra/bourgeau/readme.md @@ -11,7 +11,7 @@ Compact 75% universal hotswap PCB with USB-C that supports a fixed 6.25U bottom There are 3 ways to put the board in bootloader mode: - Hold the top-left key (typically `Esc`) while plugging in the USB cable, OR -- While the PCB is plugged into the PC, press the physical `QK_BOOT` button on the back of the board, OR +- While the PCB is plugged into the PC, press the physical `RESET` button on the back of the board, OR - With the default layout, toggle Layer 1 and press the `ESC` key. ## Compiling Firmware diff --git a/keyboards/studiokestra/cascade/readme.md b/keyboards/studiokestra/cascade/readme.md index e217b3edea..db55844ed1 100644 --- a/keyboards/studiokestra/cascade/readme.md +++ b/keyboards/studiokestra/cascade/readme.md @@ -11,7 +11,7 @@ There are 3 ways to put the board in bootloader mode: - Hold the top-left key (typically `Esc`) while plugging in the USB cable, OR -- While the PCB is plugged into the PC, press the physical `QK_BOOT` button on the back of the board, OR +- While the PCB is plugged into the PC, press the physical `RESET` button on the back of the board, OR - With the default layout, toggle Layer 1 and press the `ESC` key. ## Compiling Firmware diff --git a/keyboards/studiokestra/galatea/readme.md b/keyboards/studiokestra/galatea/readme.md index 08a6eae011..1268c596bf 100644 --- a/keyboards/studiokestra/galatea/readme.md +++ b/keyboards/studiokestra/galatea/readme.md @@ -13,7 +13,7 @@ TKL H87/88c compatible PCB with support for the most common layouts. There are 3 ways to put the board in bootloader mode: - Hold the top-left key (typically `Esc`) while plugging in the USB cable, OR -- While the PCB is plugged into the PC, press the physical `QK_BOOT` button on the back of the board, OR +- While the PCB is plugged into the PC, press the physical `RESET` button on the back of the board, OR - With the default layout, toggle Layer 1 and press the `R` key. ## Compiling Firmware diff --git a/keyboards/studiokestra/nue/readme.md b/keyboards/studiokestra/nue/readme.md index f29f27be22..42e72902e4 100644 --- a/keyboards/studiokestra/nue/readme.md +++ b/keyboards/studiokestra/nue/readme.md @@ -11,7 +11,7 @@ There are 3 ways to put the board in bootloader mode: - Hold the top-left key (typically `Esc`) while plugging in the USB cable, OR -- While the PCB is plugged into the PC, press the physical `QK_BOOT` button on the back of the board, OR +- While the PCB is plugged into the PC, press the physical `RESET` button on the back of the board, OR - With the default layout, toggle Layer 1 and press the `R` key. ## Compiling Firmware |