diff options
Diffstat (limited to 'keyboards/studiokestra')
21 files changed, 16 insertions, 80 deletions
diff --git a/keyboards/studiokestra/bourgeau/config.h b/keyboards/studiokestra/bourgeau/config.h index 07ac871795..152950f61e 100644 --- a/keyboards/studiokestra/bourgeau/config.h +++ b/keyboards/studiokestra/bourgeau/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" #define MATRIX_ROWS 6 #define MATRIX_COLS 16 @@ -56,9 +55,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -68,7 +64,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -#define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/studiokestra/bourgeau/info.json b/keyboards/studiokestra/bourgeau/info.json index 6b9169ba0a..0cde6da684 100644 --- a/keyboards/studiokestra/bourgeau/info.json +++ b/keyboards/studiokestra/bourgeau/info.json @@ -8,6 +8,8 @@ "pid": "0x7501", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layout_aliases": { "LAYOUT_all": "LAYOUT_75_ansi_rwkl" }, diff --git a/keyboards/studiokestra/bourgeau/readme.md b/keyboards/studiokestra/bourgeau/readme.md index b0a0bb2a89..16f87618e0 100644 --- a/keyboards/studiokestra/bourgeau/readme.md +++ b/keyboards/studiokestra/bourgeau/readme.md @@ -11,7 +11,7 @@ Compact 75% universal hotswap PCB with USB-C that supports a fixed 6.25U bottom There are 3 ways to put the board in bootloader mode: - Hold the top-left key (typically `Esc`) while plugging in the USB cable, OR -- While the PCB is plugged into the PC, press the physical `QK_BOOT` button on the back of the board, OR +- While the PCB is plugged into the PC, press the physical `RESET` button on the back of the board, OR - With the default layout, toggle Layer 1 and press the `ESC` key. ## Compiling Firmware diff --git a/keyboards/studiokestra/bourgeau/rules.mk b/keyboards/studiokestra/bourgeau/rules.mk index 42e7cc3f2e..e027898b62 100644 --- a/keyboards/studiokestra/bourgeau/rules.mk +++ b/keyboards/studiokestra/bourgeau/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/studiokestra/cascade/config.h b/keyboards/studiokestra/cascade/config.h index 6e02763997..1a7bdb4860 100644 --- a/keyboards/studiokestra/cascade/config.h +++ b/keyboards/studiokestra/cascade/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" #define MATRIX_ROWS 5 #define MATRIX_COLS 14 @@ -55,9 +54,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -67,7 +63,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -#define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/studiokestra/cascade/info.json b/keyboards/studiokestra/cascade/info.json index eb5e9b5ffb..096e20a27b 100644 --- a/keyboards/studiokestra/cascade/info.json +++ b/keyboards/studiokestra/cascade/info.json @@ -8,6 +8,8 @@ "pid": "0x6001", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT_all": { "layout": [ diff --git a/keyboards/studiokestra/cascade/readme.md b/keyboards/studiokestra/cascade/readme.md index e217b3edea..db55844ed1 100644 --- a/keyboards/studiokestra/cascade/readme.md +++ b/keyboards/studiokestra/cascade/readme.md @@ -11,7 +11,7 @@ There are 3 ways to put the board in bootloader mode: - Hold the top-left key (typically `Esc`) while plugging in the USB cable, OR -- While the PCB is plugged into the PC, press the physical `QK_BOOT` button on the back of the board, OR +- While the PCB is plugged into the PC, press the physical `RESET` button on the back of the board, OR - With the default layout, toggle Layer 1 and press the `ESC` key. ## Compiling Firmware diff --git a/keyboards/studiokestra/cascade/rules.mk b/keyboards/studiokestra/cascade/rules.mk index 42e7cc3f2e..e027898b62 100644 --- a/keyboards/studiokestra/cascade/rules.mk +++ b/keyboards/studiokestra/cascade/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/studiokestra/galatea/config.h b/keyboards/studiokestra/galatea/config.h index 2e598b1d95..540213d551 100644 --- a/keyboards/studiokestra/galatea/config.h +++ b/keyboards/studiokestra/galatea/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" #define MATRIX_ROWS 12 #define MATRIX_COLS 9 @@ -55,14 +54,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - -/* Bootmagic Lite key configuration */ -#define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/studiokestra/galatea/readme.md b/keyboards/studiokestra/galatea/readme.md index 08a6eae011..1268c596bf 100644 --- a/keyboards/studiokestra/galatea/readme.md +++ b/keyboards/studiokestra/galatea/readme.md @@ -13,7 +13,7 @@ TKL H87/88c compatible PCB with support for the most common layouts. There are 3 ways to put the board in bootloader mode: - Hold the top-left key (typically `Esc`) while plugging in the USB cable, OR -- While the PCB is plugged into the PC, press the physical `QK_BOOT` button on the back of the board, OR +- While the PCB is plugged into the PC, press the physical `RESET` button on the back of the board, OR - With the default layout, toggle Layer 1 and press the `R` key. ## Compiling Firmware diff --git a/keyboards/studiokestra/galatea/rev1/info.json b/keyboards/studiokestra/galatea/rev1/info.json index 2b832d7fc7..ee90d256a1 100644 --- a/keyboards/studiokestra/galatea/rev1/info.json +++ b/keyboards/studiokestra/galatea/rev1/info.json @@ -8,6 +8,8 @@ "pid": "0x8801", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT_all": { "layout": [ diff --git a/keyboards/studiokestra/galatea/rev1/rules.mk b/keyboards/studiokestra/galatea/rev1/rules.mk index a61e60c8a4..6fe874e748 100644 --- a/keyboards/studiokestra/galatea/rev1/rules.mk +++ b/keyboards/studiokestra/galatea/rev1/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/studiokestra/galatea/rev2/info.json b/keyboards/studiokestra/galatea/rev2/info.json index 9954a96274..d79ab68c40 100644 --- a/keyboards/studiokestra/galatea/rev2/info.json +++ b/keyboards/studiokestra/galatea/rev2/info.json @@ -8,6 +8,8 @@ "pid": "0x8802", "device_version": "0.0.2" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT_all": { "layout": [ diff --git a/keyboards/studiokestra/galatea/rev2/rules.mk b/keyboards/studiokestra/galatea/rev2/rules.mk index a0a1e94e36..a927de843c 100644 --- a/keyboards/studiokestra/galatea/rev2/rules.mk +++ b/keyboards/studiokestra/galatea/rev2/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/studiokestra/nascent/config.h b/keyboards/studiokestra/nascent/config.h index a88a42348c..4ce9f6230f 100644 --- a/keyboards/studiokestra/nascent/config.h +++ b/keyboards/studiokestra/nascent/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" #define MATRIX_ROWS 10 #define MATRIX_COLS 8 @@ -29,14 +28,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LED_CAPS_LOCK_PIN B6 #define LED_PIN_ON_STATE 0 -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - -/* Bootmagic Lite key configuration */ -#define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/studiokestra/nascent/info.json b/keyboards/studiokestra/nascent/info.json index 55d8d0049c..d9c5d2b785 100644 --- a/keyboards/studiokestra/nascent/info.json +++ b/keyboards/studiokestra/nascent/info.json @@ -8,6 +8,8 @@ "pid": "0x0165", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "community_layouts": [ "65_ansi_blocker", "65_ansi_blocker_split_bs", diff --git a/keyboards/studiokestra/nascent/rules.mk b/keyboards/studiokestra/nascent/rules.mk index 30e86c0190..6ff9b4e02b 100644 --- a/keyboards/studiokestra/nascent/rules.mk +++ b/keyboards/studiokestra/nascent/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/studiokestra/nue/config.h b/keyboards/studiokestra/nue/config.h index 1e9f715a6e..2730122900 100644 --- a/keyboards/studiokestra/nue/config.h +++ b/keyboards/studiokestra/nue/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" #define MATRIX_ROWS 5 #define MATRIX_COLS 14 @@ -26,14 +25,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_ROW_PINS { B0, B7, F1, F5, F4} #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - -/* Bootmagic Lite key configuration */ -#define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/studiokestra/nue/info.json b/keyboards/studiokestra/nue/info.json index 874f827546..bff06e269d 100644 --- a/keyboards/studiokestra/nue/info.json +++ b/keyboards/studiokestra/nue/info.json @@ -8,6 +8,8 @@ "pid": "0x0701", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT_all": { "layout": [ diff --git a/keyboards/studiokestra/nue/readme.md b/keyboards/studiokestra/nue/readme.md index f29f27be22..42e72902e4 100644 --- a/keyboards/studiokestra/nue/readme.md +++ b/keyboards/studiokestra/nue/readme.md @@ -11,7 +11,7 @@ There are 3 ways to put the board in bootloader mode: - Hold the top-left key (typically `Esc`) while plugging in the USB cable, OR -- While the PCB is plugged into the PC, press the physical `QK_BOOT` button on the back of the board, OR +- While the PCB is plugged into the PC, press the physical `RESET` button on the back of the board, OR - With the default layout, toggle Layer 1 and press the `R` key. ## Compiling Firmware diff --git a/keyboards/studiokestra/nue/rules.mk b/keyboards/studiokestra/nue/rules.mk index 717cc07b4b..c58df49ea8 100644 --- a/keyboards/studiokestra/nue/rules.mk +++ b/keyboards/studiokestra/nue/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # |