diff options
Diffstat (limited to 'keyboards/studiokestra/galatea')
-rw-r--r-- | keyboards/studiokestra/galatea/config.h | 8 | ||||
-rw-r--r-- | keyboards/studiokestra/galatea/readme.md | 2 | ||||
-rw-r--r-- | keyboards/studiokestra/galatea/rev1/info.json | 2 | ||||
-rw-r--r-- | keyboards/studiokestra/galatea/rev1/rules.mk | 6 | ||||
-rw-r--r-- | keyboards/studiokestra/galatea/rev2/info.json | 2 | ||||
-rw-r--r-- | keyboards/studiokestra/galatea/rev2/rules.mk | 6 |
6 files changed, 5 insertions, 21 deletions
diff --git a/keyboards/studiokestra/galatea/config.h b/keyboards/studiokestra/galatea/config.h index 2e598b1d95..540213d551 100644 --- a/keyboards/studiokestra/galatea/config.h +++ b/keyboards/studiokestra/galatea/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" #define MATRIX_ROWS 12 #define MATRIX_COLS 9 @@ -55,14 +54,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - -/* Bootmagic Lite key configuration */ -#define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/studiokestra/galatea/readme.md b/keyboards/studiokestra/galatea/readme.md index 08a6eae011..1268c596bf 100644 --- a/keyboards/studiokestra/galatea/readme.md +++ b/keyboards/studiokestra/galatea/readme.md @@ -13,7 +13,7 @@ TKL H87/88c compatible PCB with support for the most common layouts. There are 3 ways to put the board in bootloader mode: - Hold the top-left key (typically `Esc`) while plugging in the USB cable, OR -- While the PCB is plugged into the PC, press the physical `QK_BOOT` button on the back of the board, OR +- While the PCB is plugged into the PC, press the physical `RESET` button on the back of the board, OR - With the default layout, toggle Layer 1 and press the `R` key. ## Compiling Firmware diff --git a/keyboards/studiokestra/galatea/rev1/info.json b/keyboards/studiokestra/galatea/rev1/info.json index 2b832d7fc7..ee90d256a1 100644 --- a/keyboards/studiokestra/galatea/rev1/info.json +++ b/keyboards/studiokestra/galatea/rev1/info.json @@ -8,6 +8,8 @@ "pid": "0x8801", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT_all": { "layout": [ diff --git a/keyboards/studiokestra/galatea/rev1/rules.mk b/keyboards/studiokestra/galatea/rev1/rules.mk index a61e60c8a4..6fe874e748 100644 --- a/keyboards/studiokestra/galatea/rev1/rules.mk +++ b/keyboards/studiokestra/galatea/rev1/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/studiokestra/galatea/rev2/info.json b/keyboards/studiokestra/galatea/rev2/info.json index 9954a96274..d79ab68c40 100644 --- a/keyboards/studiokestra/galatea/rev2/info.json +++ b/keyboards/studiokestra/galatea/rev2/info.json @@ -8,6 +8,8 @@ "pid": "0x8802", "device_version": "0.0.2" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT_all": { "layout": [ diff --git a/keyboards/studiokestra/galatea/rev2/rules.mk b/keyboards/studiokestra/galatea/rev2/rules.mk index a0a1e94e36..a927de843c 100644 --- a/keyboards/studiokestra/galatea/rev2/rules.mk +++ b/keyboards/studiokestra/galatea/rev2/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # |