4 files changed, 3 insertions, 15 deletions
diff --git a/keyboards/studiokestra/bourgeau/config.h b/keyboards/studiokestra/bourgeau/config.h
index 07ac871795..152950f61e 100644
--- a/keyboards/studiokestra/bourgeau/config.h
+++ b/keyboards/studiokestra/bourgeau/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 #define MATRIX_ROWS 6
 #define MATRIX_COLS 16
@@ -56,9 +55,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
@@ -68,7 +64,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-#define BOOTMAGIC_LITE_ROW 0
-#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/studiokestra/bourgeau/info.json b/keyboards/studiokestra/bourgeau/info.json
index 6b9169ba0a..0cde6da684 100644
--- a/keyboards/studiokestra/bourgeau/info.json
+++ b/keyboards/studiokestra/bourgeau/info.json
@@ -8,6 +8,8 @@
         "pid": "0x7501",
         "device_version": "0.0.1"
     },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "layout_aliases": {
         "LAYOUT_all": "LAYOUT_75_ansi_rwkl"
     },
diff --git a/keyboards/studiokestra/bourgeau/readme.md b/keyboards/studiokestra/bourgeau/readme.md
index b0a0bb2a89..16f87618e0 100644
--- a/keyboards/studiokestra/bourgeau/readme.md
+++ b/keyboards/studiokestra/bourgeau/readme.md
@@ -11,7 +11,7 @@ Compact 75% universal hotswap PCB with USB-C that supports a fixed 6.25U bottom
 There are 3 ways to put the board in bootloader mode:
 
 - Hold the top-left key (typically `Esc`) while plugging in the USB cable, OR
-- While the PCB is plugged into the PC, press the physical `QK_BOOT` button on the back of the board, OR
+- While the PCB is plugged into the PC, press the physical `RESET` button on the back of the board, OR
 - With the default layout, toggle Layer 1 and press the `ESC` key.
 
 ## Compiling Firmware
diff --git a/keyboards/studiokestra/bourgeau/rules.mk b/keyboards/studiokestra/bourgeau/rules.mk
index 42e7cc3f2e..e027898b62 100644
--- a/keyboards/studiokestra/bourgeau/rules.mk
+++ b/keyboards/studiokestra/bourgeau/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #