3 files changed, 2 insertions, 48 deletions
diff --git a/keyboards/stello65/hs_rev1/config.h b/keyboards/stello65/hs_rev1/config.h
index 3da4275402..8be05e8310 100644
--- a/keyboards/stello65/hs_rev1/config.h
+++ b/keyboards/stello65/hs_rev1/config.h
@@ -3,7 +3,6 @@
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 10
@@ -25,21 +24,12 @@
 /* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-// #define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
-
 //#define LED_NUM_LOCK_PIN B0
 //#define LED_CAPS_LOCK_PIN B1
 //#define LED_SCROLL_LOCK_PIN B2
 //#define LED_COMPOSE_PIN B3
 //#define LED_KANA_PIN B4
 
-//#define BACKLIGHT_PIN B7
-//#define BACKLIGHT_LEVELS 3
-//#define BACKLIGHT_BREATHING
-
 #define RGB_DI_PIN D0
 #ifdef RGB_DI_PIN
 #    define RGBLED_NUM 4
@@ -67,43 +57,11 @@
 //#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
diff --git a/keyboards/stello65/hs_rev1/info.json b/keyboards/stello65/hs_rev1/info.json
index f68e0333a2..218f2657ad 100644
--- a/keyboards/stello65/hs_rev1/info.json
+++ b/keyboards/stello65/hs_rev1/info.json
@@ -8,6 +8,8 @@
         "pid": "0x0004",
         "device_version": "0.0.1"
     },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "layouts": {
         "LAYOUT": {
             "layout": [{"label":"0,0", "x":0, "y":0}, {"label":"1,0", "x":1, "y":0}, {"label":"0,1", "x":2, "y":0}, {"label":"1,1", "x":3, "y":0}, {"label":"0,2", "x":4, "y":0}, {"label":"1,2", "x":5, "y":0}, {"label":"0,3", "x":6, "y":0}, {"label":"1,3", "x":7, "y":0}, {"label":"0,4", "x":8, "y":0}, {"label":"1,4", "x":9, "y":0}, {"label":"0,5", "x":10, "y":0}, {"label":"1,5", "x":11, "y":0}, {"label":"0,6", "x":12, "y":0}, {"label":"1,6", "x":13, "y":0, "w":2}, {"label":"2,0", "x":0, "y":1, "w":1.5}, {"label":"3,0", "x":1.5, "y":1}, {"label":"2,1", "x":2.5, "y":1}, {"label":"3,1", "x":3.5, "y":1}, {"label":"2,2", "x":4.5, "y":1}, {"label":"3,2", "x":5.5, "y":1}, {"label":"2,3", "x":6.5, "y":1}, {"label":"3,3", "x":7.5, "y":1}, {"label":"2,4", "x":8.5, "y":1}, {"label":"3,4", "x":9.5, "y":1}, {"label":"2,5", "x":10.5, "y":1}, {"label":"3,5", "x":11.5, "y":1}, {"label":"2,6", "x":12.5, "y":1}, {"label":"3,6", "x":13.5, "y":1, "w":1.5}, {"label":"2,7", "x":15, "y":1}, {"label":"4,0", "x":0, "y":2, "w":1.75}, {"label":"4,1", "x":1.75, "y":2}, {"label":"5,0", "x":2.75, "y":2}, {"label":"5,1", "x":3.75, "y":2}, {"label":"4,2", "x":4.75, "y":2}, {"label":"5,2", "x":5.75, "y":2}, {"label":"4,3", "x":6.75, "y":2}, {"label":"5,3", "x":7.75, "y":2}, {"label":"4,4", "x":8.75, "y":2}, {"label":"5,4", "x":9.75, "y":2}, {"label":"4,5", "x":10.75, "y":2}, {"label":"5,5", "x":11.75, "y":2}, {"label":"5,6", "x":12.75, "y":2, "w":2.25}, {"label":"4,7", "x":15, "y":2}, {"label":"6,0", "x":0, "y":3, "w":2.25}, {"label":"6,1", "x":2.25, "y":3}, {"label":"7,0", "x":3.25, "y":3}, {"label":"7,1", "x":4.25, "y":3}, {"label":"6,2", "x":5.25, "y":3}, {"label":"7,2", "x":6.25, "y":3}, {"label":"6,3", "x":7.25, "y":3}, {"label":"7,3", "x":8.25, "y":3}, {"label":"6,4", "x":9.25, "y":3}, {"label":"7,4", "x":10.25, "y":3}, {"label":"6,5", "x":11.25, "y":3}, {"label":"7,5", "x":12.25, "y":3}, {"label":"7,6", "x":13.25, "y":3, "w":1.75}, {"label":"6,7", "x":15, "y":3}, {"label":"8,0", "x":0, "y":4, "w":1.25}, {"label":"9,0", "x":1.25, "y":4, "w":1.25}, {"label":"8,1", "x":2.5, "y":4, "w":1.25}, {"label":"9,1", "x":3.75, "y":4, "w":6.25}, {"label":"8,5", "x":10, "y":4, "w":1.25}, {"label":"9,5", "x":11.25, "y":4, "w":1.25}, {"label":"8,6", "x":13, "y":4}, {"label":"9,6", "x":14, "y":4}, {"label":"8,7", "x":15, "y":4}]
diff --git a/keyboards/stello65/hs_rev1/rules.mk b/keyboards/stello65/hs_rev1/rules.mk
index 85eec9079f..b851d0ab39 100644
--- a/keyboards/stello65/hs_rev1/rules.mk
+++ b/keyboards/stello65/hs_rev1/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #