diff options
Diffstat (limited to 'keyboards/skyloong/gk61/pro/readme.md')
-rw-r--r-- | keyboards/skyloong/gk61/pro/readme.md | 33 |
1 files changed, 33 insertions, 0 deletions
diff --git a/keyboards/skyloong/gk61/pro/readme.md b/keyboards/skyloong/gk61/pro/readme.md new file mode 100644 index 0000000000..529f6f32c4 --- /dev/null +++ b/keyboards/skyloong/gk61/pro/readme.md @@ -0,0 +1,33 @@ +# GK61 PRO + +![GK61 PRO](https://i.imgur.com/DTetyVLh.jpg) + +## The PCB features: +* QMK & VIA compatibility +* RGB Matrix backlight +* The space bar position switch can be interchanged with encoder module. + + +The following is the QMK Firmware for the Destop 60% keylayout - designed in Dongguan Jizhi Electronic Technology Co., Ltd + +* Keyboard Maintainer: [linlin012](https://github.com/linlin012) +* Hardware Supported: DestopPCB for Skyloong keylayout 60%, STM32F103R8T6 +* Hardware Availability: http://www.skyloong.com.cn https://skyloong.vip + +Make example for this keyboard (after setting up your build environment): + + make skyloong/gk61/pro:default + +Flashing example for this keyboard: + + make skyloong/gk61/pro:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available |