6 files changed, 5 insertions, 46 deletions
diff --git a/keyboards/skippys_custom_pcs/rooboard65/config.h b/keyboards/skippys_custom_pcs/rooboard65/config.h
index ee624d5380..a687ceb612 100644
--- a/keyboards/skippys_custom_pcs/rooboard65/config.h
+++ b/keyboards/skippys_custom_pcs/rooboard65/config.h
@@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 5
@@ -39,12 +38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
@@ -72,27 +65,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* Define less important options */
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  * These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/skippys_custom_pcs/rooboard65/info.json b/keyboards/skippys_custom_pcs/rooboard65/info.json
index ab68e33ec0..497b5a0e7f 100644
--- a/keyboards/skippys_custom_pcs/rooboard65/info.json
+++ b/keyboards/skippys_custom_pcs/rooboard65/info.json
@@ -8,6 +8,9 @@
         "pid": "0x0002",
         "device_version": "0.0.1"
     },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
+    "community_layouts": ["65_ansi"],
     "layouts": {
         "LAYOUT_65_ansi": {
             "layout": [
diff --git a/keyboards/skippys_custom_pcs/rooboard65/rules.mk b/keyboards/skippys_custom_pcs/rooboard65/rules.mk
index a1a32c1e92..52a18008f4 100644
--- a/keyboards/skippys_custom_pcs/rooboard65/rules.mk
+++ b/keyboards/skippys_custom_pcs/rooboard65/rules.mk
@@ -1,12 +1,6 @@
-# MCU name
-MCU = atmega32u4
-
 # Processor frequency
 F_CPU = 8000000
 
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #
@@ -19,5 +13,3 @@ NKRO_ENABLE = yes           # Enable N-Key Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output
-
-LAYOUTS = 65_ansi
diff --git a/keyboards/skippys_custom_pcs/roopad/config.h b/keyboards/skippys_custom_pcs/roopad/config.h
index 493de6ee32..90d7964649 100644
--- a/keyboards/skippys_custom_pcs/roopad/config.h
+++ b/keyboards/skippys_custom_pcs/roopad/config.h
@@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 5
@@ -41,9 +40,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
 #define RGB_DI_PIN B6
 #define RGBLED_NUM 21
 #define RGBLIGHT_SLEEP
diff --git a/keyboards/skippys_custom_pcs/roopad/info.json b/keyboards/skippys_custom_pcs/roopad/info.json
index 734310ed8c..9b7c079765 100644
--- a/keyboards/skippys_custom_pcs/roopad/info.json
+++ b/keyboards/skippys_custom_pcs/roopad/info.json
@@ -8,6 +8,8 @@
         "pid": "0x0001",
         "device_version": "0.0.1"
     },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "layouts": {
         "LAYOUT": {
             "layout": [{"label":"Num Lock", "x":1.5, "y":0}, {"label":"/", "x":2.5, "y":0}, {"label":"*", "x":3.5, "y":0}, {"label":"-", "x":4.5, "y":0}, {"x":0, "y":1}, {"label":"7", "x":1.5, "y":1}, {"label":"8", "x":2.5, "y":1}, {"label":"9", "x":3.5, "y":1}, {"label":"+", "x":4.5, "y":1, "h":2}, {"x":0, "y":2}, {"label":"4", "x":1.5, "y":2}, {"label":"5", "x":2.5, "y":2}, {"label":"6", "x":3.5, "y":2}, {"x":0, "y":3}, {"label":"1", "x":1.5, "y":3}, {"label":"2", "x":2.5, "y":3}, {"label":"3", "x":3.5, "y":3}, {"label":"Enter", "x":4.5, "y":3, "h":2}, {"x":0, "y":4}, {"label":"0", "x":1.5, "y":4, "w":2}, {"label":".", "x":3.5, "y":4}]
diff --git a/keyboards/skippys_custom_pcs/roopad/rules.mk b/keyboards/skippys_custom_pcs/roopad/rules.mk
index 3aaf70166e..d280d696f5 100644
--- a/keyboards/skippys_custom_pcs/roopad/rules.mk
+++ b/keyboards/skippys_custom_pcs/roopad/rules.mk
@@ -1,12 +1,6 @@
-# MCU name
-MCU = atmega32u4
-
 # Processor frequency
 F_CPU = 8000000
 
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #