diff options
Diffstat (limited to 'keyboards/rookiebwoy/late9/readme.md')
| -rw-r--r-- | keyboards/rookiebwoy/late9/readme.md | 27 |
1 files changed, 27 insertions, 0 deletions
diff --git a/keyboards/rookiebwoy/late9/readme.md b/keyboards/rookiebwoy/late9/readme.md new file mode 100644 index 0000000000..9815391cbd --- /dev/null +++ b/keyboards/rookiebwoy/late9/readme.md @@ -0,0 +1,27 @@ +# LATE-9 + + +The LATE-9 is a multi-tap input keyboard based on mobile phones from the late '90s. LATE-9 is intended as a dev board with 18 buttons and an OLED screen, made by through-hole components only. With this, you can experiment QMK OLED capabilities with very little expense. + + + +See the project repository for gerbers. + +* Keyboard maintainer: [rookiebwoy](https://github.com/rookiebwoy) +* Hardware supported: ProMicro, _Elite-C (not tested)_ +* Project repository: [LATE-9 on github](https://github.com/rookiebwoy/late-9) + +Make example for this keyboard (after setting up your build environment): + + make rookiebwoy/late9/rev1:default + +Flashing example for this keyboard: + + make rookiebwoy/late9/rev1:default:flash + + +When asked by the terminal, short with a metal wire the pins on the backside of the board highlighted as `RST` (one is the `RESET` and the other one is `GROUND`) to enter the bootloader and let the OS detects the device. +After installing this firmware you can use Bootmagic to enter the bootloader while plugging in your LATE-9. By default it's the button on the upper-left of the keyboard. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + |