9 files changed, 7 insertions, 145 deletions
diff --git a/keyboards/redscarf_iiplus/verb/config.h b/keyboards/redscarf_iiplus/verb/config.h
index 86110cb8ec..1b04baf771 100755
--- a/keyboards/redscarf_iiplus/verb/config.h
+++ b/keyboards/redscarf_iiplus/verb/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 6
@@ -45,7 +44,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LED_PIN_ON_STATE 0
 
 #define BACKLIGHT_PIN B7
-//   #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 3
 
 // #define RGB_DI_PIN E2
@@ -64,45 +62,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 // #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -118,7 +82,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/redscarf_iiplus/verb/info.json b/keyboards/redscarf_iiplus/verb/info.json
index 2e4ad61866..45096a152f 100644
--- a/keyboards/redscarf_iiplus/verb/info.json
+++ b/keyboards/redscarf_iiplus/verb/info.json
@@ -8,6 +8,8 @@
         "pid": "0x0000",
         "device_version": "0.0.1"
     },
+    "processor": "atmega32u4",
+    "bootloader": "qmk-dfu",
     "layouts": {
         "LAYOUT_78_ansi": {
             "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2.25, "y":0}, {"x":3.25, "y":0}, {"x":4.25, "y":0}, {"x":5.25, "y":0}, {"x":6.25, "y":0}, {"x":7.25, "y":0}, {"x":8.25, "y":0}, {"x":9.25, "y":0}, {"x":10.25, "y":0}, {"x":11.25, "y":0}, {"x":12.25, "y":0}, {"x":13.25, "y":0}, {"x":14.25, "y":0}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"x":17.25, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2.25, "y":1, "w":1.5}, {"x":3.75, "y":1}, {"x":4.75, "y":1}, {"x":5.75, "y":1}, {"x":6.75, "y":1}, {"x":7.75, "y":1}, {"x":8.75, "y":1}, {"x":9.75, "y":1}, {"x":10.75, "y":1}, {"x":11.75, "y":1}, {"x":12.75, "y":1}, {"x":13.75, "y":1}, {"x":14.75, "y":1}, {"x":15.75, "y":1, "w":1.5}, {"x":17.25, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2.25, "y":2, "w":1.75}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":12, "y":2}, {"x":13, "y":2}, {"x":14, "y":2}, {"x":15, "y":2, "w":2.25}, {"x":17.25, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2.25, "y":3, "w":2.25}, {"x":4.5, "y":3}, {"x":5.5, "y":3}, {"x":6.5, "y":3}, {"x":7.5, "y":3}, {"x":8.5, "y":3}, {"x":9.5, "y":3}, {"x":10.5, "y":3}, {"x":11.5, "y":3}, {"x":12.5, "y":3}, {"x":13.5, "y":3}, {"x":14.5, "y":3, "w":1.75}, {"x":16.25, "y":3}, {"x":17.25, "y":3}, {"x":0, "y":4}, {"x":1, "y":4}, {"x":2.25, "y":4, "w":1.25}, {"x":3.5, "y":4, "w":1.25}, {"x":4.75, "y":4, "w":1.25}, {"x":6, "y":4, "w":6.25}, {"x":12.25, "y":4}, {"x":13.25, "y":4}, {"x":14.25, "y":4}, {"x":15.25, "y":4}, {"x":16.25, "y":4}, {"x":17.25, "y":4}]
diff --git a/keyboards/redscarf_iiplus/verb/rules.mk b/keyboards/redscarf_iiplus/verb/rules.mk
index 57075926c7..73a2fe6487 100755
--- a/keyboards/redscarf_iiplus/verb/rules.mk
+++ b/keyboards/redscarf_iiplus/verb/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = qmk-dfu
-
 # Build Options
 #   change yes to no to disable
 #
diff --git a/keyboards/redscarf_iiplus/verc/config.h b/keyboards/redscarf_iiplus/verc/config.h
index 86110cb8ec..1b04baf771 100755
--- a/keyboards/redscarf_iiplus/verc/config.h
+++ b/keyboards/redscarf_iiplus/verc/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 6
@@ -45,7 +44,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LED_PIN_ON_STATE 0
 
 #define BACKLIGHT_PIN B7
-//   #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 3
 
 // #define RGB_DI_PIN E2
@@ -64,45 +62,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 // #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -118,7 +82,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/redscarf_iiplus/verc/info.json b/keyboards/redscarf_iiplus/verc/info.json
index 1093d3a363..0a951ade69 100644
--- a/keyboards/redscarf_iiplus/verc/info.json
+++ b/keyboards/redscarf_iiplus/verc/info.json
@@ -8,6 +8,9 @@
         "pid": "0x0000",
         "device_version": "0.0.1"
     },
+    "processor": "atmega32u4",
+    "bootloader": "qmk-dfu",
+    "community_layouts": ["65_ansi"],
     "layouts": {
         "LAYOUT_65_ansi": {
             "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}]
diff --git a/keyboards/redscarf_iiplus/verc/rules.mk b/keyboards/redscarf_iiplus/verc/rules.mk
index 21b8b529de..73a2fe6487 100755
--- a/keyboards/redscarf_iiplus/verc/rules.mk
+++ b/keyboards/redscarf_iiplus/verc/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = qmk-dfu
-
 # Build Options
 #   change yes to no to disable
 #
@@ -19,5 +13,3 @@ AUDIO_ENABLE = no           # Audio output
 
 CUSTOM_MATRIX = yes
 SRC += matrix.c
-
-LAYOUTS = 65_ansi
diff --git a/keyboards/redscarf_iiplus/verd/config.h b/keyboards/redscarf_iiplus/verd/config.h
index 6249755853..6afbd690a6 100644
--- a/keyboards/redscarf_iiplus/verd/config.h
+++ b/keyboards/redscarf_iiplus/verd/config.h
@@ -16,7 +16,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 5
@@ -39,17 +38,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
 #define LED_NUM_LOCK_PIN E6
 #define LED_CAPS_LOCK_PIN C6
 #define LED_PIN_ON_STATE 0
 
 #define BACKLIGHT_PIN B7
-//   #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 3
 
 // #define RGB_DI_PIN E2
@@ -68,45 +61,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 // #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -122,7 +81,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/redscarf_iiplus/verd/info.json b/keyboards/redscarf_iiplus/verd/info.json
index 0d36542278..33d210a4f6 100644
--- a/keyboards/redscarf_iiplus/verd/info.json
+++ b/keyboards/redscarf_iiplus/verd/info.json
@@ -8,6 +8,8 @@
     "pid": "0x7778",
     "device_version": "0.0.1"
   },
+  "processor": "atmega32u4",
+  "bootloader": "halfkay",
   "layouts": {  
     "LAYOUT_60_ansi_numpad_split0": {
       "layout": [
diff --git a/keyboards/redscarf_iiplus/verd/rules.mk b/keyboards/redscarf_iiplus/verd/rules.mk
index 8ae7cef9e2..4164035629 100644
--- a/keyboards/redscarf_iiplus/verd/rules.mk
+++ b/keyboards/redscarf_iiplus/verd/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = halfkay
-
 # Build Options
 #   change yes to no to disable
 #